MEC029_FAI.yaml

                # description': The physical location of a customer site.
                # x-etsi-mec-cardinality': 0..1
                # x-etsi-mec-origin-type': CpInfo
                $ref: '#/components/schemas/CpInfo'
          
          type: object
          x-etsi-mec-cardinality: '1'
          
    CmConnSubscription:
      properties:
        _links:
          $ref: '#/components/schemas/CmConnSubscription.links'
          
        callbackReference:
          description: URI selected by the service consumer to receive notifications on the subscribed FAIS information. This shall be included both in the request and in response.
          format: uri
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: URI
        expiryDeadline:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        filterCriteriaCmConn:
          $ref: '#/components/schemas/CmConnSubscription.filterCriteriaCmConn'
        subscriptionType:
          description: Shall be set to "CmConnSubscription".
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
      required:
      - subscriptionType
      - callbackReference
      - filterCriteriaCmConn
      type: object
      x-etsi-notes: "NOTE:\t'notReady' indicates that the CM has not started the registration process yet.\n\t'notSynchronized' indicates that the CM has not initiated or completed the synchronization of the downstream physical layer.\n\t'phySynchronized' indicates that the CM has completed the synchronization of the downstream physical layer.\n\t'dsTopologyResolutionInProgress' indicates that the CM is attempting to determine its MD-DS-SG.\n\t'usParametersAcquired' indicates that the CM has completed the upstream parameters acquisition or have completed the downstream and upstream service groups resolution.\n\t'rangingInProgress' indicates that the CM has initiated the initial ranging process.\n\t'rangingComplete' indicates that the CM has completed initial ranging and received a Ranging Status of success from the CMTS in the RNG-RSP message.\n\t'eaeInProgress' indicates that the CM has sent an Auth Info message for EAE.\n\t'dhcpv4InProgress' indicates that the CM has sent a DHCPv4 DISCOVER to gain IP connectivity.\n\t'dhcpv6InProgress' indicates that the CM has sent a DHCPv6 Solicit message.\n\t'dhcpv4Complete' indicates that the CM has received a DHCPv4 ACK message from the CMTS.\n\t'dhcpv6Complete' indicates that the CM has received a DHCPv6 Reply message from the CMTS.\n\t'todEstablished' indicates that the CM has successfully acquired time of day.\n\t'securityEstablished' indicates that the CM has successfully completed the BPI initialization process.\n\t'configFileDownloadComplete' indicates that the CM has completed the config file download process.\n\t'registrationInProgress' indicates that the CM has sent a Registration Request.\n\t'registrationComplete' indicates that the CM has successfully completed the Registration process with the CMTS.\n\t'accessDenied' indicates that the CM has received a registration aborted notification from the CMTS.\n\t'operational' indicates that the CM has completed all necessary initialization steps and is operational.\n\t'bpiInit' indicates that the CM has started the BPI initialization process as indicated in the CM config file.\n\t'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding."
      x-etsi-ref: 6.3.4
    CpInfo:
      properties:
        latitude:
          description: 'Latitude (DATUM=WGS84)

            -90 to 90 in decimal degree format DDD.ddd'
          format: Float
          type: number
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Float
        longitude:
          description: 'Longitude (DATUM=WGS84)

            -180 to 180 in decimal degree format DDD.ddd'
          format: Float
          type: number
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Float
        postalCode:
          description: Postal code for the location
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: String
      type: object
      x-etsi-ref: 6.5.3
    DevInfoNotification:
      properties:
        deviceErrStatus:
          $ref: '#/components/schemas/deviceErrStatus'
        #  x-etsi-mec-cardinality: '1'
         # x-etsi-mec-origin-type: Enum
        deviceId:
          description: The identifier for a device.
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
        notificationType:
          description: Shall be set to "DevInfoNotification".
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
        timeStamp:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
      required:
      - notificationType
      - deviceId
      - deviceErrStatus
      type: object
      x-etsi-ref: 6.4.3
      
      
    deviceErrStatus:
     description: 'The abnormal operational status of the device. Enumeration of:  1 = Error. 2 = Disabled.'
     enum:
      - 1
      - 2
     type: integer
      
    DevInfoSubscription.links:
          description: Hyperlink related to the resource. This shall be only included in the HTTP responses and in HTTP PUT requests.
          properties:
            self:
              # description': Self referring URI. The URI shall be unique within the FAI API as it acts as an ID for the subscription.
              # x-etsi-mec-cardinality': '1'
              # x-etsi-mec-origin-type': LinkType
              $ref: '#/components/schemas/LinkType'
          required:
          - self
          type: object
          x-etsi-mec-cardinality: 0..1  
          
    DevInfoSubscription.filterCriteriaDevInfo:
          description: List of filtering criteria for the subscription. Any filtering criteria from below, which is included in the request, shall also be included in the response.
          properties:
            deviceErrStatus:
              items:
                $ref: '#/components/schemas/deviceErrStatus'
              minItems: 0
              type: array
              x-etsi-mec-cardinality: 0..N
              x-etsi-mec-origin-type: Enum
            deviceId:
              description: The device identifier.
              items:
                type: string
              minItems: 0
              type: array
              x-etsi-mec-cardinality: 0..N
              x-etsi-mec-origin-type: String
            gwId:
              description: The identifier of an Internet Gateway Device through which the customer premises device is connected.
              items:
                type: string
              minItems: 0
              type: array
              x-etsi-mec-cardinality: 0..N
              x-etsi-mec-origin-type: String
          type: object
          x-etsi-mec-cardinality: '1' 
    
    DevInfoSubscription:
      properties:
        _links:
          $ref: '#/components/schemas/DevInfoSubscription.links'
        callbackReference:
          description: URI selected by the service consumer to receive notifications on the subscribed FAIS information. This shall be included both in the request and in response.
          format: uri
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: URI
        expiryDeadline:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        filterCriteriaDevInfo:
         $ref: '#/components/schemas/DevInfoSubscription.filterCriteriaDevInfo'
        subscriptionType:
          description: Shall be set to "DevInfoSubscription".
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
      required:
      - subscriptionType
      - callbackReference
      - filterCriteriaDevInfo
      type: object
      x-etsi-ref: 6.3.3
    
    DeviceInfo.deviceStatus:
          description: 'Current operational status of the device. Enumeration of: 1 = Up. 2 = Initializing. 3 = Error. 4 = Disabled.'
          enum:
          - 1
          - 2
          - 3
          - 4
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum    
    DeviceInfo:
      properties:
        deviceId:
          description: 'Typically, the serial number of the device.This value shall remain fixed over the lifetime of the device, including across firmware updates.'
          type: array
          items:
            type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: String
        deviceStatus:
          $ref: '#/components/schemas/DeviceInfo.deviceStatus'
        downloadDiagnostics:
          # description': The result of a HTTP and FTP DownloadDiagnostics Test.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': DownloadDiagnostics
          $ref: '#/components/schemas/DownloadDiagnostics'
        gwId:
          description: 'Information (typically the serial number) to identify an Internet Gateway Device through which

            the customer premises device is connected.


            This value shall remain fixed over the lifetime of the device, including across firmware updates.'
          items:
            type: string
          minItems: 1
          type: array
          x-etsi-mec-cardinality: 1..N
          x-etsi-mec-origin-type: String
        iPConnectionUpTime:
          description: The time in seconds that the IP interface has been connected.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        iPPingDiagnostics:
          # description': The result of an IP-layer ping test.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': IPPingDiagnostics
          $ref: '#/components/schemas/IPPingDiagnostics'
        timeStamp:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        totalBytesReceived:
          description: Total number of IP payload bytes received since the device was last restarted.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        totalBytesSent:
          description: Total number of IP payload bytes sent since the device was last restarted.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        totalPacketsReceived:
          description: Total number of packets received since the device was last restarted.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        totalPacketsSent:
          description: Total number of packets sent since the device was last restarted.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        traceRouteDiagnostics:
          # description': The result of an IP-layer trace-route test.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TraceRouteDiagnostics
          $ref: '#/components/schemas/TraceRouteDiagnostics'
        upTime:
          description: Time in seconds since the device was last restarted.
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Integer
        uploadDiagnostics:
          # description': The result of a HTTP and FTP UploadDiagnostics Test.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': UploadDiagnostics
          $ref: '#/components/schemas/UploadDiagnostics'
      required:
      - gwId
      - deviceStatus
      - upTime
      - iPConnectionUpTime
      - totalBytesSent
      - totalBytesReceived
      - totalPacketsSent
      - totalPacketsReceived
      type: object
      x-etsi-ref: 6.2.3
    DownloadDiagnostics.diagnosticsState:
          description: 'The state of the HTTP and FTP download test. Enumeration of:1 = None.2 = Requested.3 = Completed.4 = Error_InitConnectionFailed.5 = Error_NoResponse.6 = Error_TransferFailed. 7 = Error_PasswordRequestFailed.8 = Error_LoginFailed.9 = Error_NoTransferMode.10 = Error_NoPASV.11 = Error_IncorrectSize.12 = Error_Timeout.'
          enum:
          - 1
          - 2
          - 3
          - 4
          - 5
          - 6
          - 7
          - 8
          - 9
          - 10
          - 11
          - 12
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum    
    DownloadDiagnostics:
      properties:
        bOMTime:
          # description': Begin of transmission time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        diagnosticsState:
          $ref: '#/components/schemas/DownloadDiagnostics.diagnosticsState'
        downloadURI:
          description: The URI for the device to perform the download on.
          format: uri
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: URI
        eOMTime:
          # description': End of transmission in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        rOMTime:
          # description': Request time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        tCPOpenReponseTime:
          # description': Response time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        tCPOpenRequestTime:
          # description': Request time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        testBytesReceived:
          description: The test traffic received in bytes during the FTP/HTTP transaction including FTP/HTTP headers, between bOMTime and eOMTime.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        totalBytesReceived:
          description: The total number of bytes received on the Interface between bOMTime and eOMTime.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
      required:
      - diagnosticsState
      type: object
      x-etsi-ref: 6.5.6
    ExpiryNotification.links:
          description: List of hyperlinks related to the resource.
          properties:
            self:
              description: Self referring URI. This shall be included in the response from the FAIS. The URI shall be unique within the FAI API as it acts as an ID for the subscription.
              format: uri
              type: string
              x-etsi-mec-cardinality: '1'
              x-etsi-mec-origin-type: URI
          required:
          - self
          type: object
          x-etsi-mec-cardinality: '1'  
    ExpiryNotification:
      properties:
        _links:
          $ref: '#/components/schemas/ExpiryNotification.links'
        expiryDeadline:
          # description': Time stamp.
          # x-etsi-mec-cardinality': '1'
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        timeStamp:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
      required:
      - _links
      - expiryDeadline
      type: object
      x-etsi-ref: 6.4.5
      
      
    FaInfo.connectivityInfo.interfaceType:
                description: 'The physical interface used for the end customer site:1   =   100BASE-TX.2   =   1000BASE-TX.3   =   1000BASE-LX.4   =   1000BASELX10.5   =   1000BASEBX10. 6   =   1000BASE-LH.7   =   1000Base-ZX. 8   =   ADSL-RJ11.9   =   VDSL-RJ11.10 =   GPON.'
                enum:
                - 1
                - 2
                - 3
                - 4
                - 5
                - 6
                - 7
                - 8
                - 9
                - 10
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum    
    FaInfo.connectivityInfo.lastMileTech:
                description: 'An informative field identifying the last mile access technology used.The valid values are:1 = ADSL.2 = VDSL.3 = GPON. 4 = XGPON.5 = NGPON2. 6 = XGSPON. 7 = GFAST.8 = P2PEthernet.'
                enum:
                - 1
                - 2
                - 3
                - 4
                - 5
                - 6
                - 7
                - 8
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum    
    FaInfo.connectivityInfo:
            description: The per connectivity domain FAI as defined below.
            properties:
              dsbw:
                description: The bandwidth (in Mbps) from the network towards the customer site.
                type: integer
                x-etsi-mec-cardinality: 0..1
                x-etsi-mec-origin-type: Integer
              interfaceType:
                 $ref: '#/components/schemas/FaInfo.connectivityInfo.interfaceType'
              lastMileTech:
                $ref: '#/components/schemas/FaInfo.connectivityInfo.lastMileTech'
              latency:
                description: Maximum baseline latency (in ms) between customer site and service edge node.
                type: integer
                x-etsi-mec-cardinality: 0..1
                x-etsi-mec-origin-type: Integer
              usbw:
                description: The bandwidth (in Mbps) from the customer site towards the network.
                type: integer
                x-etsi-mec-cardinality: 0..1
                x-etsi-mec-origin-type: Integer
            required:
            - lastMileTech
            - interfaceType
            
    FaInfo:
        properties:
          connectivityInfo:
           type: array
           items:
             $ref: '#/components/schemas/FaInfo.connectivityInfo'
          customerPremisesInfo:
            description: The physical location of a customer site.
            items:
              $ref: '#/components/schemas/CpInfo'
            minItems: 1
            type: array
            x-etsi-mec-cardinality: 1..N
            x-etsi-mec-origin-type: CpInfo
          timeStamp:
            # description': Time stamp.
            # x-etsi-mec-cardinality': 0..1
            # x-etsi-mec-origin-type': TimeStamp
            $ref: '#/components/schemas/TimeStamp'
        type: object
        required:
        - customerPremisesInfo
      
        x-etsi-ref: 6.2.2
    
    IPPingDiagnostics.diagnosticsState:
          description: 'The state of the IP ping test. Enumeration of: 1 = None. 2 = Requested. 3 = Complete. 4 = Error_CannotResolveHostName. 5 = Error_Internal.6 = Error_Other.'
          enum:
          - 1
          - 2
          - 3
          - 4
          - 5
          - 6
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum 
          
    IPPingDiagnostics:
      properties:
        averageResponseTime:
          description: 'Result parameter indicating the average response time in milliseconds over all repetitions with successful responses of the most recent ping test.


            If there were no successful responses, this value shall be zero.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        dataBlockSize:
          description: Size of the data block in bytes to be sent for each ping.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        diagnosticsState:
          $ref: '#/components/schemas/IPPingDiagnostics.diagnosticsState'
        failureCount:
          description: Result parameter indicating the number of failed pings in the most recent ping test.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        host:
          description: Host name or address of the host to ping.
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: String
        maximumResponseTime:
          description: 'Result parameter indicating the maximum response time in milliseconds over all repetitions with successful responses of the most recent ping test.


            If there were no successful responses, this value shall be zero.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        minimumResponseTime:
          description: 'Result parameter indicating the minimum response time in milliseconds over all repetitions with successful responses of the most recent ping test.


            If there were no successful responses, this value shall be zero.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        numberOfRepetitions:
          description: Number of repetitions of the ping test to perform before reporting the results.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        successCount:
          description: 'Result parameter indicating the number of successful

            pings (those in which a successful response was received prior to the timeout) in the most recent ping test.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        timeout:
          description: Timeout in milliseconds for the ping test.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
      required:
      - diagnosticsState
      type: object
      x-etsi-ref: 6.5.4
      
    OnuAlarmNotification.alarm:
          description: 'Indicates the alarm of the ONU:0  = EquipmentAlarm.1  = PoweringAlarm.2  = BatteryMissing.3  = BatteryFailure.4  = BatteryLow.5  = PhysicalIntrusion. 6  = OnuSelfTestFailure. 7  = DyingGasp. 8  = TemperatureYellow.9  = TemperatureRed.10 = VoltageYellow.11 = VoltageRed.12 = OnuManualPowerOff. 13 = InvImage.14 = PseOverloadYellow.15 = PseOverloadRed.'
          enum:
          - 0
          - 1
          - 2
          - 3
          - 4
          - 5
          - 6
          - 7
          - 8
          - 9
          - 10
          - 11
          - 12
          - 13
          - 14
          - 15
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum    
    OnuAlarmNotification:
      properties:
        alarm:
          $ref: '#/components/schemas/OnuAlarmNotification.alarm'
        customerPremisesInfo:
          description: The physical location of the related customer sites.
          items:
            $ref: '#/components/schemas/CpInfo'
          minItems: 0
          type: array
          x-etsi-mec-cardinality: 0..N
          x-etsi-mec-origin-type: CpInfo
        notificationType:
          description: Shall be set to "OnuAlarmNotification".
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
        onuId:
          description: The unique identifier for an optical network unit.
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
        timeStamp:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
      required:
      - notificationType
      - onuId
      - alarm
      type: object
      x-etsi-ref: 6.4.2
      
    OnuAlarmSubscription.alarms:
     description: "In case alarms is not included in the subscription request, the default value -1 = All shall be used and included in the response:\n0  =\tEquipmentAlarm.\n\t(Functional failure on an internal interface.)\n1  =\tPoweringAlarm.\n\t(Loss of external power to battery backup unit. This alarm is typically derived through an external interface to a battery backup unit, and indicates that AC is no longer available to maintain battery charge.)\n2  =\tBatteryMissing.\n\t(Battery is provisioned but missing.)\n3  =\tBatteryFailure.\n\t(Battery is provisioned and present but cannot recharge.)\n4  =\tBatteryLow.\n\t(Battery is provisioned and present but its voltage is too low.)\n5  =\tPhysicalIntrusion.\n\t(Applies if the ONU supports detection such as door or box open.)\n6  =\tOnuSelfTestFailure.\n\t(ONU has failed autonomous self-test.)\n7  =\tDyingGasp.\n\t(ONU is powering off imminently due to loss of power to the ONU itself.)\n8  =\tTemperatureYellow.\n\t(No service shutdown at present, but the circuit pack is operating beyond its recommended range.)\n9  =\tTemperatureRed.\n\t(Some services have been shut down to avoid equipment damage.)\n10 =\tVoltageYellow.\n\t(No service shutdown at present, but the line power voltage is below its recommended minimum.)\n11 =\tVoltageRed.\n\t(Some services have been shut down to avoid power collapse.)\n12 =\tOnuManualPowerOff.\n\t(The ONU is shutting down because the subscriber has turned off its power switch.)\n13 =\tInvImage.\n\t(Software image is invalid.)\n14 =\tPseOverloadYellow.\n\t(Indicates that the ONU is nearing its maximum ability to supply the known PoE demand of the attached PDs. The thresholds for declaring and clearing this alarm are vendor-specific.)\n15 =\tPseOverloadRed.\n\t(Indicates that the ONU is unable to supply all of the PoE demand of the attached PDs and has removed or reduced power to at least one PD.)\n-1 =\tAll."
     enum:
        - 0 
        - 1
        - 2 
        - 3
        - 4 
        - 5
        - 6 
        - 7
        - 8 
        - 9
        - 10
        - 11
        - 12
        - 13
        - 14
        - 15
        - -1
     type: integer
    OnuAlarmSubscription.links:
          description: Hyperlink related to the resource. This shall be only included in the HTTP responses and in HTTP PUT requests.
          properties:
            self:
              # description': Self referring URI. The URI shall be unique within the FAI API as it acts as an ID for the subscription.
              # x-etsi-mec-cardinality': '1'
              # x-etsi-mec-origin-type': LinkType
              $ref: '#/components/schemas/LinkType'
          required:
          - self
          type: object
          x-etsi-mec-cardinality: 0..1
    
    OnuAlarmSubscription.filterCriteriaOnuAlarm:
          description: List of filtering criteria for the subscription. Any filtering criteria from below, which is included in the request, shall also be included in the response.
          properties:
            alarms:
              items:
                $ref: '#/components/schemas/OnuAlarmSubscription.alarms'
              minItems: 0
              type: array
              x-etsi-mec-cardinality: 0..N
              x-etsi-mec-origin-type: Enum
            customerPremisesInfo:
              description: 0 to N physical locations of the customer sites.
              items:
                $ref: '#/components/schemas/CpInfo'
              minItems: 0
              type: array
              x-etsi-mec-cardinality: 0..N
              x-etsi-mec-origin-type: CpInfo
            onuId:
              description: '1 to N unique identifiers for the optical network units.

                Typical it is the unique serial number for each ONU, which contains the vendor ID and version number. The first four bytes are an ASCII-encoded four-letter vendor ID. The second four bytes are a binary encoded serial number, under the control of the ONU vendor.'
              items:
                type: string
              minItems: 1
              type: array
              x-etsi-mec-cardinality: 1..N
              x-etsi-mec-origin-type: String
          required:
          - onuId
          type: object
          x-etsi-mec-cardinality: '1'  
    OnuAlarmSubscription:
      properties:
        _links:
          $ref: '#/components/schemas/OnuAlarmSubscription.links'
        callbackReference:
          description: URI selected by the service consumer to receive notifications on the subscribed FAIS information. This shall be included both in the request and in response.
          format: uri
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: URI
        expiryDeadline:
          # description': Time stamp.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        filterCriteriaOnuAlarm:
         $ref: '#/components/schemas/OnuAlarmSubscription.filterCriteriaOnuAlarm'  
        subscriptionType:
          description: Shall be set to \"OnuAlarmSubscription\".
          type: string
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: String
      required:
      - subscriptionType
      - callbackReference
      - filterCriteriaOnuAlarm
      type: object
      x-etsi-ref: 6.3.2
      
    PonInfo.opticalNetworkInfo.dsRate:
                description: "Downstream line rate, valid values are:\n1 =\t2,48832 Gbit/s: G-PON [i.9]; or\nNG-PON2 option 2 [i.8].\n2 =\t9,95328 Gbit/s:  XG-PON [i.10]; or\n XGS-PON [i.11]; or\nNG-PON2 option 1 [i.8]."
                enum:
                - 1
                - 2
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum  
    PonInfo.opticalNetworkInfo.operationalState:
                description: 'It reports whether the ONU is currently capable of performing its function. Valid values are: 0 = enabled 1 = disabled'
                enum:
                - 0
                - 1
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum    
    PonInfo.opticalNetworkInfo.ponTech:
                description: 'An informative field identifying the optical technology used. The valid values are: 1 = GPON. 2 = XGPON.3 = NGPON2. 4 = XGSPON.'
                enum:
                - 1
                - 2
                - 3
                - 4
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum    
    PonInfo.opticalNetworkInfo.usRate:
                description: "Upstream line rate, valid values are:\n1 =\t1,24416 Gbit/s: G-PON option 1 [i.9].\n2 =\t2,48832 Gbit/s: G-PON option 2 [i.9]; or\nXG-PON [i.10]; or\nNG-PON2 option 2 [i.8].\n3 =\t9,95328 Gbit/s: XGS-PON [i.11]; or\nNG-PON2 option 1 [i.8]."
                enum:
                - 1
                - 2
                - 3
                type: integer
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: Enum    
    PonInfo.opticalNetworkInfo:
            description: ''
            items:
              type: object
            minItems: 1
            properties:
              dsRate:
                $ref: '#/components/schemas/PonInfo.opticalNetworkInfo.dsRate'
              onuId:
                description: Information to identify an Optical Network Unit.
                type: string
                x-etsi-mec-cardinality: '1'
                x-etsi-mec-origin-type: String
              operationalState:
                $ref: '#/components/schemas/PonInfo.opticalNetworkInfo.operationalState'
              ponTech:
                 $ref: '#/components/schemas/PonInfo.opticalNetworkInfo.ponTech'
              usRate:
                $ref: '#/components/schemas/PonInfo.opticalNetworkInfo.usRate'
            required:
            - onuId
            - ponTech
            - operationalState
            - dsRate
            - usRate
            
    PonInfo:
       properties:
          customerPremisesInfo:
            description: The physical location of a customer site.
            items:
              $ref: '#/components/schemas/CpInfo'
            minItems: 1
            type: array
            x-etsi-mec-cardinality: 1..N
            x-etsi-mec-origin-type: CpInfo
          opticalNetworkInfo:
           type: array
           items:
            $ref: '#/components/schemas/PonInfo.opticalNetworkInfo'             
          ponSYS_ID:
            description: 'The 20-bit identity of the optical system within a certain domain.This is a reference value set by the OSS.'
            type: string
            x-etsi-mec-cardinality: '1'
            x-etsi-mec-origin-type: String
          timeStamp:
            # description': Time stamp.
            # x-etsi-mec-cardinality': 0..1
            # x-etsi-mec-origin-type': TimeStamp
            $ref: '#/components/schemas/TimeStamp'
       required:
       - customerPremisesInfo
       - ponSYS_ID
       - opticalNetworkInfo
       type: object
       x-etsi-ref: 6.2.5

    SubscriptionLinkList.links.subscription.subscriptionType:
                    description: 'Numeric value (0 - 255) corresponding to specified type of subscription as following: 0 = RESERVED. 1 = ONU_ALARM. 2 = DEVICE_ABNORMAL_ALERT. 3 = CM_CONNECTIVITY_STATE.4 = ANI_ALARM.'
                    enum:
                    - 0
                    - 1
                    - 2
                    - 3
                    - 4
                    type: integer
                    x-etsi-mec-cardinality: '1'
                    x-etsi-mec-origin-type: Enum
                    
    SubscriptionLinkList.links.subscription:
                description: A link to a subscription.
                properties:
                  href:
                    description: The URI referring to the subscription.
                    format: uri
                    type: string
                    x-etsi-mec-cardinality: '1'
                    x-etsi-mec-origin-type: URI
                  subscriptionType:
                    $ref: '#/components/schemas/SubscriptionLinkList.links.subscription.subscriptionType'
                required:
                - href
                - subscriptionType
                
                
    SubscriptionLinkList.links:
          description: List of hyperlinks related to the resource.
          properties:
             subscription:
               type: array
               items:
                $ref: '#/components/schemas/SubscriptionLinkList.links.subscription'
          
    SubscriptionLinkList:
      properties:
        _links:
          $ref: '#/components/schemas/SubscriptionLinkList.links'
      required:
      - _links
      type: object
      x-etsi-ref: 6.3.5
    TimeStamp:
      properties:
        nanoSeconds:
          description: The nanoseconds part of the time. Time is defined as Unix-time since January 1, 1970, 00:00:00 UTC.
          format: Uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
        seconds:
          description: The seconds part of the time. Time is defined as Unixtime since January 1, 1970, 00:00:00 UTC.
          format: Uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
      required:
      - seconds
      - nanoSeconds
      type: object
      x-etsi-ref: 6.5.2
      
    TraceRouteDiagnostics.diagnosticsState:
          description: 'The state of the IP trace-route test. Enumeration of: 1 = None. 2 = Requested. 3 = Complete.  4 = Error_CannotResolveHostName. 5 = Error_MaxHopCountExceeded. 6 = Error_Internal. 7 = Error_Other.'
          enum:
          - 1
          - 2
          - 3
          - 4
          - 5
          - 6
          - 7
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum
          
    TraceRouteDiagnostics:
      properties:
        dataBlockSize:
          description: Size of the data block in bytes to be sent for each trace route.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        diagnosticsState:
          $ref: '#/components/schemas/TraceRouteDiagnostics.diagnosticsState'
        host:
          description: Host name or address of the host to find a route to.
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: String
        maxHopCount:
          description: The maximum number of hop used in outgoing probe packets. The default is 30 hops.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        numberOfRouteHops:
          description: 'Result parameter indicating the number of hops within the discovered route.


            If a route could not be determined, this value shall be zero.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        responseTime:
          description: 'Result parameter indicating the response time in milliseconds the most recent trace route test.


            If a route could not be determined, this value shall be zero.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        timeout:
          description: Timeout in milliseconds for the trace route test.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
      required:
      - diagnosticsState
      type: object
      x-etsi-ref: 6.5.5

    
    UploadDiagnostics.diagnosticsState:
          description: 'The state of the HTTP and FTP download test. Enumeration of: 1 = None. 2 = Requested. 3 = Completed. 4 = Error_InitConnectionFailed. 5 = Error_NoResponse.  6 = Error_PasswordRequestFailed. 7 = Error_LoginFailed. 8 = Error_NoTransferMode. 9 = Error_NoPASV.  10 = Error_NoCWD. 11 = Error_NoSTOR.12 = Error_NoTransferComplete.'
          enum:
          - 1
          - 2
          - 3
          - 4
          - 5
          - 6
          - 7
          - 8
          - 9
          - 10
          - 11
          - 12
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Enum    
    UploadDiagnostics:
      properties:
        bOMTime:
          # description': Begin of transmission time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        diagnosticsState:
           $ref: '#/components/schemas/UploadDiagnostics.diagnosticsState'
        eOMTime:
          # description': End of transmission in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        rOMTime:
          # description': Request time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        tCPOpenReponseTime:
          # description': Response time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        tCPOpenRequestTime:
          # description': Request time in UTC, which shall be specified to microsecond precision.
          # x-etsi-mec-cardinality': 0..1
          # x-etsi-mec-origin-type': TimeStamp
          $ref: '#/components/schemas/TimeStamp'
        testBytesSent:
          description: The test traffic sent in bytes during the FTP/HTTP transaction including FTP/HTTP headers, between bOMTime and eOMTime.
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        testFileLength:
          description: 'The size of the file (in bytes) to be uploaded to the

            server.'
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Integer
        uploadURI:
          description: The URI for the device to perform the upload to.
          format: uri
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: URI
      required:
      - diagnosticsState
      type: object
      x-etsi-ref: 6.5.7

    LinkType:
      description: >-
        'This data type represents a type of link'
      type: object
      required:
        - href
      properties:
        href:
          $ref: '#/components/schemas/Href' 
    Href:
      description: >-
        The URI referring to the subscription.
      type: string
      format: uri    
    ProblemDetails:
      properties:
        detail:
          description: A human-readable explanation specific to this occurrence of the problem
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: String
        instance:
          description: A URI reference that identifies the specific occurrence of the problem
          format: uri
          type: string
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: URI
        status:
          description: The HTTP status code for this occurrence of the problem
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32