STF593 hotfix for `format: int32` integer format hotfix

A misinterpretation led to enforcing format: int32for all type: integer elements. This merge request fixes this and restores format: values according to the specification.

Edited by Michel Roy

Merge request reports

Loading
+130 −115
Changes for WlanInformationApi.json: 130 added lines, 115 removed lines.
Original line number Diff line number Diff line
@@ -803,7 +803,7 @@
          },
          "channel": {
            "description": "Channel configured for the Access Point.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -1060,21 +1060,21 @@
        "properties": {
          "availAdmCap": {
            "description": "Available Admission Capacity that specifies the remaining amount of medium time available via explicit admission control, in units of 32 s/s.",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
          },
          "channelUtilization": {
            "description": "The percentage of time, linearly scaled with 255 representing 100 %, that the AP sensed the medium was busy, as indicated by either the physical or virtual Carrier Sense (CS) mechanism.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
          },
          "staCount": {
            "description": "An unsigned integer that indicates the total number of STAs currently associated with this BSS.",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt16"
@@ -1325,21 +1325,21 @@
        "properties": {
          "ExtScMcsCap": {
            "description": "Extended SC MCS capabilities as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dmgApOrPcpCapInfo": {
            "description": "DMG AP or PCP capabilities information as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
          },
          "dmgStaBeamTrackTimeLimit": {
            "description": "DMG station beam tracking time limit as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
@@ -1353,28 +1353,28 @@
          },
          "maxNrBasicAmsduSubframes": {
            "description": "Number of basic A-MSDU subframes in A-MSDU as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "maxNrShortAmsduSubframes": {
            "description": "Number of short A-MSDU subframes in A-MSDU as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "sarCap": {
            "description": "SAR capabilities as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "tddCap": {
            "description": "TDD capabilities as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
@@ -1397,28 +1397,28 @@
        "properties": {
          "ampduParameters": {
            "description": "A-MPDU parameters as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "Uint8",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "reserved": {
            "description": "",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "supportedMcs": {
            "description": "Supported MCS as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "trnParameters": {
            "description": "Training parameters as defined in draft IEEE P802.11/D4.0 [i.11]",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
@@ -1436,35 +1436,35 @@
        "properties": {
          "muMimoStaCount": {
            "description": "Indicates the total number of STAs currently associated with this BSS that have a 1 in the MU Beamformee Capable field of their VHT Capabilities element.",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt16"
          },
          "obsSec20MhzUtil": {
            "description": "Observable loading on each of the secondary 20 MHz channel.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "obsSec40MhzUtil": {
            "description": "Observable loading on each of the secondary 40 MHz channel.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "obsSec80MhzUtil": {
            "description": "Observable loading on each of the secondary 80 MHz channel.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "spatStreamUnderUtil": {
            "description": "The percentage of time, linearly scaled with 255 representing 100 %, that the AP has underutilized spatial domain resources for given busy time of the medium.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
@@ -1484,28 +1484,28 @@
        "properties": {
          "altitude": {
            "description": "The altitude value of location as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "altitudeType": {
            "description": "The type description for altitude information e.g. floors or meters as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "altitudeUncertainty": {
            "description": "The uncertainty for altitude information as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "datum": {
            "description": "The datum value to express how coordinates are organized and related to real world as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1519,7 +1519,7 @@
          },
          "latUncertainty": {
            "description": "The uncertainty for Latitude information as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1533,7 +1533,7 @@
          },
          "longUncertainty": {
            "description": "The uncertainty for Longitude information as defined in IETF RFC 6225 [6]",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1553,12 +1553,14 @@
        "properties": {
          "heMacCapInfo": {
            "description": "MAC capabilities of an Access Point.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "hePhyCapinfo": {
            "description": "PHY capabilities of an Access Point.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1571,6 +1573,7 @@
          },
          "supportedHeMcsNssSet": {
            "description": "Supported MCS and NSS Set.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1588,42 +1591,42 @@
        "properties": {
          "ampduParameters": {
            "description": "A-MPDU parameters as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
          },
          "aselCap": {
            "description": "ASEL capabilities as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
          },
          "htCapabilityInfo": {
            "description": "HT Capability Information as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt16"
          },
          "htExtendedCap": {
            "description": "Extended HT Capabilities as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt16"
          },
          "supportedMcsSet": {
            "description": "Supported MCS set as defined in IEEE 802.11-2016 [8].",
            "format": "int64",
            "format": "uint128",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint128"
          },
          "txBeamFormCap": {
            "description": "Transmit Beamforming Capabilities as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt32"
@@ -1638,7 +1641,7 @@
          "aselCap"
        ],
        "type": "object",
        "x-etsi-ref": "6.5.1"
        "x-etsi-ref": "6.5.14"
      },
      "InlineNotification": {
        "oneOf": [
@@ -1730,25 +1733,28 @@
          },
          "bssidInfo": {
            "description": "Additional information related to Access Point that is being reported such as AP reachability, security, key scope, Mobility Domain, HT/VHT capability and Fine Time Measurements.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt32"
          },
          "channel": {
            "description": "The channel currently used by this Access Point.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "operatingClass": {
            "description": "The channel set of the AP indicated by this BSSID.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "phyType": {
            "description": "PHY type of the AP indicated by this BSSID. It is an integer value coded according to the value of the dot11PHYType.",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1781,7 +1787,7 @@
          },
          "status": {
            "description": "The HTTP status code for this occurrence of the problem",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -1806,7 +1812,7 @@
        "properties": {
          "rssi": {
            "description": "The Received Signal Strength Indicator from a station",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
@@ -1825,14 +1831,14 @@
          },
          "staLastDataDownlinkRate": {
            "description": "The data transmit rate in kbps that was most recently used for transmission of data PPDUs from the access point to the station.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "staLastDataUplinkRate": {
            "description": "The data transmit rate in Kbps that was most recently used for transmission of data PPDUs from the associated station to the access point.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -1971,7 +1977,7 @@
          },
          "channel": {
            "description": "Channel currently used by the station.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -2002,12 +2008,14 @@
        "properties": {
          "groupIdentity": {
            "description": "Indicates the requested statistics group describing the Statistics Group Data according to table 9-114 of IEEE 802.11-2016 [8].",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
          },
          "md": {
            "description": "Measurement Duration.",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt16"
@@ -2064,307 +2072,307 @@
      "StatisticsGroupData": {
        "properties": {
          "dot11AMPDUDelimiterCRCErrorCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11AMPDUReceivedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11AMSDUAckFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11AckFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11BeamformingFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11ChannelWidthSwitchCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11DualCTSFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11DualCTSSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11ExplicitBARFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FCSErrorCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FailedAMSDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FailedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FortyMHzFrameReceivedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FortyMHzFrameTransmittedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11FrameDuplicateCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11GrantedRDGUnusedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11GrantedRDGUsedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11GroupReceivedFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11GroupTransmittedFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11ImplicitBARFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11MPDUInReceivedAMPDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11MultipleRetryAMSDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11MultipleRetryCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11PSMPUTTGrantDuration": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11PSMPUTTUsedDuration": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosAckFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosDiscardedFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosFailedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosFrameDuplicateCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosMPDUsReceivedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosMultipleRetryCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosRTSFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosRTSSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosReceivedFragmentCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosRetriesReceivedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosRetryCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosTransmittedFragmentCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11QosTransmittedFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsBIPMICErrors": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsCCMPDecryptErrors": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsCCMPReplays": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsCMACReplays": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsRobustMgmtCCMPReplays": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsTKIPICVErrors": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RSNAStatsTKIPReplays": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RTSFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RTSLSIGFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RTSLSIGSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RTSSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11ReceivedAMSDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11ReceivedFragmentCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -2382,96 +2390,103 @@
            "x-etsi-mec-origin-type": "Uint64"
          },
          "dot11RetryAMSDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11RetryCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11STAStatisticsAPAverageAccessDelay": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsAverageAccessDelayBackGround": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsAverageAccessDelayBestEffort": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsAverageAccessDelayVideo": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsAverageAccessDelayVoice": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsChannelUtilization": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STAStatisticsStationCount": {
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "dot11STBCCTSFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11STBCCTSSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedAMPDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedAMSDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedFragmentCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedFrameCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedFramesInGrantedRDGCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedMPDUsInAMPDUCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -2483,37 +2498,37 @@
            "x-etsi-mec-origin-type": "Uint64"
          },
          "dot11TransmittedOctetsInAMSDUCount": {
            "format": "int64",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TransmittedOctetsInGrantedRDGCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TwentyMHzFrameReceivedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11TwentyMHzFrameTransmittedCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11nonSTBCCTSFailureCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "dot11nonSTBCCTSSuccessCount": {
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "0..1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -2560,14 +2575,14 @@
        "properties": {
          "nanoSeconds": {
            "description": "The nanoseconds part of the time. Time is defined as Unix-time since January 1, 1970, 00:00:00 UTC.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "seconds": {
            "description": "The seconds part of the time. Time is defined as Unixtime since January 1, 1970, 00:00:00 UTC.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint32"
@@ -2584,7 +2599,7 @@
        "properties": {
          "vhtCapInfo": {
            "description": "VHT capabilities Info as defined in IEEE 802.11-2016 [8].",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt32"
@@ -2608,42 +2623,42 @@
        "properties": {
          "downlinkLoad": {
            "description": "1-octet positive integer representing the current percentage loading of the downlink WAN connection, scaled linearly with 255 representing 100 %, as measured over an interval the duration of which is reported in Load Measurement Duration. In cases where the downlink load is unknown to the AP, the value is set to zero.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt8"
          },
          "downlinkSpeed": {
            "description": "4-octet positive integer whose value is an estimate of the WAN Backhaul link current downlink speed in kilobits per second.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint32"
          },
          "lmd": {
            "description": "The LMD (Load Measurement Duration) field is a 2-octet positive integer representing the duration over which the Downlink Load and Uplink Load have been measured, in tenths of a second. When the actual load measurement duration is greater than the maximum value, the maximum value will be reported. The value of the LMD field is set to 0 when neither the uplink nor downlink load can be computed. When the uplink and downlink loads are computed over different intervals, the maximum interval is reported.",
            "format": "int32",
            "format": "uint16",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint16"
          },
          "uplinkLoad": {
            "description": "1-octet positive integer representing the current percentage loading of the uplink WAN connection, scaled linearly with 255 representing 100 %, as measured over an interval, the duration of which is reported in Load Measurement Duration. In cases where the uplink load is unknown to the AP, the value is set to zero.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
          },
          "uplinkSpeed": {
            "description": "4-octet positive integer whose value is an estimate of the WAN Backhaul link's current uplink speed in kilobits per second.",
            "format": "int32",
            "format": "uint32",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "UInt32"
          },
          "wanInfo": {
            "description": "Info about WAN link status, link symmetricity and capacity currently used.",
            "format": "int32",
            "format": "uint8",
            "type": "integer",
            "x-etsi-mec-cardinality": "1",
            "x-etsi-mec-origin-type": "Uint8"
+130 −115
Changes for WlanInformationApi.yaml: 130 added lines, 115 removed lines.
Original line number Diff line number Diff line
@@ -546,7 +546,7 @@ components:
          $ref: '#/components/schemas/BssLoad'
        channel:
          description: Channel configured for the Access Point.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -786,19 +786,19 @@ components:
      properties:
        availAdmCap:
          description: Available Admission Capacity that specifies the remaining amount of medium time available via explicit admission control, in units of 32 s/s.
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
        channelUtilization:
          description: "The percentage of time, linearly scaled with 255 representing 100\_%, that the AP sensed the medium was busy, as indicated by either the physical or virtual Carrier Sense (CS) mechanism."
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
        staCount:
          description: An unsigned integer that indicates the total number of STAs currently associated with this BSS.
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt16
@@ -1006,19 +1006,19 @@ components:
      properties:
        ExtScMcsCap:
          description: Extended SC MCS capabilities as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        dmgApOrPcpCapInfo:
          description: DMG AP or PCP capabilities information as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
        dmgStaBeamTrackTimeLimit:
          description: DMG station beam tracking time limit as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
@@ -1030,25 +1030,25 @@ components:
          x-etsi-mec-origin-type: Uint64
        maxNrBasicAmsduSubframes:
          description: Number of basic A-MSDU subframes in A-MSDU as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        maxNrShortAmsduSubframes:
          description: Number of short A-MSDU subframes in A-MSDU as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        sarCap:
          description: SAR capabilities as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        tddCap:
          description: TDD capabilities as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
@@ -1067,25 +1067,25 @@ components:
      properties:
        ampduParameters:
          description: A-MPDU parameters as defined in draft IEEE P802.11/D4.0 [i.11]
          format: Uint8
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        reserved:
          description: ''
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        supportedMcs:
          description: Supported MCS as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
        trnParameters:
          description: Training parameters as defined in draft IEEE P802.11/D4.0 [i.11]
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
@@ -1099,31 +1099,31 @@ components:
      properties:
        muMimoStaCount:
          description: Indicates the total number of STAs currently associated with this BSS that have a 1 in the MU Beamformee Capable field of their VHT Capabilities element.
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt16
        obsSec20MhzUtil:
          description: Observable loading on each of the secondary 20 MHz channel.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        obsSec40MhzUtil:
          description: Observable loading on each of the secondary 40 MHz channel.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        obsSec80MhzUtil:
          description: Observable loading on each of the secondary 80 MHz channel.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        spatStreamUnderUtil:
          description: "The percentage of time, linearly scaled with 255 representing 100\_%, that the AP has underutilized spatial domain resources for given busy time of the medium."
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
@@ -1139,25 +1139,25 @@ components:
      properties:
        altitude:
          description: "The altitude value of location as defined in IETF RFC\_6225 [6]"
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        altitudeType:
          description: The type description for altitude information e.g. floors or meters as defined in IETF RFC 6225 [6]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        altitudeUncertainty:
          description: The uncertainty for altitude information as defined in IETF RFC 6225 [6]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        datum:
          description: The datum value to express how coordinates are organized and related to real world as defined in IETF RFC 6225 [6]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1169,7 +1169,7 @@ components:
          x-etsi-mec-origin-type: Uint64
        latUncertainty:
          description: The uncertainty for Latitude information as defined in IETF RFC 6225 [6]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1181,7 +1181,7 @@ components:
          x-etsi-mec-origin-type: Uint64
        longUncertainty:
          description: The uncertainty for Longitude information as defined in IETF RFC 6225 [6]
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1197,11 +1197,13 @@ components:
      properties:
        heMacCapInfo:
          description: MAC capabilities of an Access Point.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        hePhyCapinfo:
          description: PHY capabilities of an Access Point.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1212,6 +1214,7 @@ components:
          x-etsi-mec-origin-type: not defined
        supportedHeMcsNssSet:
          description: Supported MCS and NSS Set.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1225,37 +1228,37 @@ components:
      properties:
        ampduParameters:
          description: A-MPDU parameters as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
        aselCap:
          description: ASEL capabilities as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
        htCapabilityInfo:
          description: HT Capability Information as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt16
        htExtendedCap:
          description: Extended HT Capabilities as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt16
        supportedMcsSet:
          description: Supported MCS set as defined in IEEE 802.11-2016 [8].
          format: int64
          format: uint128
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint128
        txBeamFormCap:
          description: Transmit Beamforming Capabilities as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt32
@@ -1267,7 +1270,7 @@ components:
      - txBeamFormCap
      - aselCap
      type: object
      x-etsi-ref: 6.5.1
      x-etsi-ref: 6.5.14
    InlineNotification:
      oneOf:
        - $ref: '#/components/schemas/AssocStaNotification'
@@ -1339,22 +1342,25 @@ components:
          x-etsi-mec-origin-type: String
        bssidInfo:
          description: Additional information related to Access Point that is being reported such as AP reachability, security, key scope, Mobility Domain, HT/VHT capability and Fine Time Measurements.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt32
        channel:
          description: The channel currently used by this Access Point.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        operatingClass:
          description: The channel set of the AP indicated by this BSSID.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        phyType:
          description: PHY type of the AP indicated by this BSSID. It is an integer value coded according to the value of the dot11PHYType.
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1381,7 +1387,7 @@ components:
          x-etsi-mec-origin-type: URI
        status:
          description: The HTTP status code for this occurrence of the problem
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -1401,7 +1407,7 @@ components:
      properties:
        rssi:
          description: The Received Signal Strength Indicator from a station
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
@@ -1418,13 +1424,13 @@ components:
          $ref: '#/components/schemas/StaIdentity'
        staLastDataDownlinkRate:
          description: The data transmit rate in kbps that was most recently used for transmission of data PPDUs from the access point to the station.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        staLastDataUplinkRate:
          description: The data transmit rate in Kbps that was most recently used for transmission of data PPDUs from the associated station to the access point.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -1545,7 +1551,7 @@ components:
          $ref: '#/components/schemas/BeaconReport'
        channel:
          description: Channel currently used by the station.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -1582,11 +1588,13 @@ components:
      properties:
        groupIdentity:
          description: Indicates the requested statistics group describing the Statistics Group Data according to table 9-114 of IEEE 802.11-2016 [8].
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
        md:
          description: Measurement Duration.
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt16
@@ -1639,257 +1647,257 @@ components:
    StatisticsGroupData:
      properties:
        dot11AMPDUDelimiterCRCErrorCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11AMPDUReceivedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11AMSDUAckFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11AckFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11BeamformingFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11ChannelWidthSwitchCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11DualCTSFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11DualCTSSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11ExplicitBARFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FCSErrorCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FailedAMSDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FailedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FortyMHzFrameReceivedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FortyMHzFrameTransmittedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11FrameDuplicateCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11GrantedRDGUnusedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11GrantedRDGUsedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11GroupReceivedFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11GroupTransmittedFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11ImplicitBARFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11MPDUInReceivedAMPDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11MultipleRetryAMSDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11MultipleRetryCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11PSMPUTTGrantDuration:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11PSMPUTTUsedDuration:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosAckFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosDiscardedFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosFailedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosFrameDuplicateCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosMPDUsReceivedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosMultipleRetryCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosRTSFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosRTSSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosReceivedFragmentCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosRetriesReceivedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosRetryCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosTransmittedFragmentCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11QosTransmittedFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsBIPMICErrors:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsCCMPDecryptErrors:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsCCMPReplays:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsCMACReplays:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsRobustMgmtCCMPReplays:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsTKIPICVErrors:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RSNAStatsTKIPReplays:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RTSFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RTSLSIGFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RTSLSIGSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RTSSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11ReceivedAMSDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11ReceivedFragmentCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -1904,80 +1912,87 @@ components:
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint64
        dot11RetryAMSDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11RetryCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11STAStatisticsAPAverageAccessDelay:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsAverageAccessDelayBackGround:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsAverageAccessDelayBestEffort:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsAverageAccessDelayVideo:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsAverageAccessDelayVoice:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsChannelUtilization:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STAStatisticsStationCount:
          format: uint8
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint8
        dot11STBCCTSFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11STBCCTSSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedAMPDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedAMSDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedFragmentCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedFrameCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedFramesInGrantedRDGCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedMPDUsInAMPDUCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -1987,32 +2002,32 @@ components:
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint64
        dot11TransmittedOctetsInAMSDUCount:
          format: int64
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TransmittedOctetsInGrantedRDGCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TwentyMHzFrameReceivedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11TwentyMHzFrameTransmittedCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11nonSTBCCTSFailureCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
        dot11nonSTBCCTSSuccessCount:
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: 0..1
          x-etsi-mec-origin-type: Uint32
@@ -2046,13 +2061,13 @@ components:
      properties:
        nanoSeconds:
          description: The nanoseconds part of the time. Time is defined as Unix-time since January 1, 1970, 00:00:00 UTC.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
        seconds:
          description: The seconds part of the time. Time is defined as Unixtime since January 1, 1970, 00:00:00 UTC.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
@@ -2065,7 +2080,7 @@ components:
      properties:
        vhtCapInfo:
          description: VHT capabilities Info as defined in IEEE 802.11-2016 [8].
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt32
@@ -2084,37 +2099,37 @@ components:
      properties:
        downlinkLoad:
          description: 1-octet positive integer representing the current percentage loading of the downlink WAN connection, scaled linearly with 255 representing 100 %, as measured over an interval the duration of which is reported in Load Measurement Duration. In cases where the downlink load is unknown to the AP, the value is set to zero.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt8
        downlinkSpeed:
          description: 4-octet positive integer whose value is an estimate of the WAN Backhaul link current downlink speed in kilobits per second.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint32
        lmd:
          description: The LMD (Load Measurement Duration) field is a 2-octet positive integer representing the duration over which the Downlink Load and Uplink Load have been measured, in tenths of a second. When the actual load measurement duration is greater than the maximum value, the maximum value will be reported. The value of the LMD field is set to 0 when neither the uplink nor downlink load can be computed. When the uplink and downlink loads are computed over different intervals, the maximum interval is reported.
          format: int32
          format: uint16
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint16
        uplinkLoad:
          description: 1-octet positive integer representing the current percentage loading of the uplink WAN connection, scaled linearly with 255 representing 100 %, as measured over an interval, the duration of which is reported in Load Measurement Duration. In cases where the uplink load is unknown to the AP, the value is set to zero.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
        uplinkSpeed:
          description: 4-octet positive integer whose value is an estimate of the WAN Backhaul link's current uplink speed in kilobits per second.
          format: int32
          format: uint32
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: UInt32
        wanInfo:
          description: Info about WAN link status, link symmetricity and capacity currently used.
          format: int32
          format: uint8
          type: integer
          x-etsi-mec-cardinality: '1'
          x-etsi-mec-origin-type: Uint8
Loading