TS 102 232-5 v3.11.1 (2019-08-02) agreed at LI#51 (Texel, 2019-06-11)

102232-5/IPMultimediaPDU.asn

--- ====================================
--- Description of the IP Multimedia PDU
--- ====================================
-
-
-IPMultimediaPDU 
-{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPMultimedia(5) version11(11)}
-
-DEFINITIONS IMPLICIT TAGS ::=
-BEGIN
-
-IMPORTS
-	-- from ETSI TS 102 232-1 [2]
-    IPAddress,
-	Location
-		FROM LI-PS-PDU
-		{itu-u(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version26(26)};
-
-
-
--- ============================
--- Object Identifier Definition
--- ============================
-
-iPMMIRIObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version11(11) iRI(1)}
-iPMMCCObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version11(11) cC(2)}
-	-- both definitions relative to: 
-	-- {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)}
-
--- =====================================
--- IP Multimedia Communications Contents
--- =====================================
-
-IPMMCC ::= SEQUENCE
-{
-	iPMMCCObjId					[0] RELATIVE-OID,
-	mMCCContents				[1] OCTET STRING,
-		-- Copy of the multimediastream, i.e. all related RTP/RTCP, UDPTL or MSRP packets
-		-- Each IPMMCC shall contain one intercepted packet
-		-- Protocol of the multimedia packets is indicated by means of mMCCprotocol parameter
-		-- mMCCContents was called rTPCCContents in earlier versions until v2.3.2.
-	...,
-	frameType					[2] FrameType OPTIONAL,
-		-- The availability of header information shall be signalled with the frameType parameter
-		-- The module is defined as OPTIONAL because of backwards compatibility reasons
-		-- For new implementations the module is MANDATORY to be used as defined in clause 5.5
-	streamIdentifier			[3] OCTET STRING OPTIONAL,
-		-- Used to identify the media stream within the current CIN, typically in case of 
-		-- multiple media streams communications
-		-- May be used to correlate each media stream with the relevant SDP media description of IRI
-		-- May contain c= and m= lines extracts for instance
-	mMCCprotocol				[4] MMCCprotocol OPTIONAL
-		-- Used to identify the protocol of packets sent in MMCCContent (RTP, UDPTL, MSRP, etc.)
-		-- Absence means mMCCContents contains RTP/RTCP packets
-}
-
-FrameType ::= ENUMERATED
-{
-	ipFrame(0),
-		-- All headers are present
-	udpFrame(1),
-		-- IP header is missing
-	rtpFrame(2),
-		-- UDP and IP headers are missing
-	audioFrame(3),
-		-- All headers are missing
-	...,
-	tcpFrame(4),
-		-- IP header is missing
-	artificialRtpFrame(5),
-		-- UDP and IP headers are missing, artificial RTP frame has been added
-	udptlFrame(6),
-		-- UDP and IP headers are missing
-	msrpFrame(7)
-		-- TCP and IP headers are missing
-
-}
-
-MMCCprotocol ::= ENUMERATED
-{
-	rTP(0),
-		-- mMCCContents parameter contains RTP/RTCP packets
-	mSRP(1),
-		-- mMCCContents parameter contains MSRP packets
-	...,
-	uDPTL(2)
-		-- mMCCContents parameter contains UDPTL packets
-}
-
--- ========================================================
--- Intercept-related information for IP Multimedia sessions
--- ========================================================
-
-IPMMIRI ::= SEQUENCE
-{
-	iPMMIRIObjId				[0] RELATIVE-OID,
-	iPMMIRIContents				[1] IPIRIContents,
-	...,
-	targetLocation				[2] Location OPTIONAL,
-		-- This common parameter is defined in TS 102 232-1 [2], the use of this parameter is described in clause 5.2.3
-	additionalSignalling		[3] SEQUENCE OF AdditionalSignalling OPTIONAL
-		-- The use of this parameter is defined in clause 5.2.5
-}
-
-IPIRIContents ::= CHOICE
-{
-	originalIPMMMessage			[0] OCTET STRING,
-		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
-	sIPMessage					[1] SIPMessage,
-		-- Copy of the SIP content and the source and destination IP address
-	h323Message					[2] H323Message,
-		-- Copy of the H.323 content and the source and destination IP address
-	...,
-	nationalIPMMIRIParameters	[3] NationalIPMMIRIParameters,
-		-- This parameter is used according to national regulations
-		-- This parameter shall be delivered as an IRI-Report-record	
-	xCAPMessage					[4] OCTET STRING		
-		-- Copy of the XCAP message including all HTTP headers and contents
-}
-
-SIPMessage ::= SEQUENCE
-{
-	iPSourceAddress				[0] IPAddress,
-	iPDestinationAddress		[1] IPAddress,
-	sIPContent					[2] OCTET STRING,
-	...
-}
-
-H323Message ::= SEQUENCE
-{
-	iPSourceAddress				[0] IPAddress,
-	iPDestinationAddress		[1] IPAddress,
-	h323Content					[2] H323MessageContent,
-	...
-}
-
-H323MessageContent ::= CHOICE
-{
-	h225CSMessageContent		[0] OCTET STRING,
-	h225RASMessageContent		[1] OCTET STRING,
-	h245MessageContent			[2] OCTET STRING,
-	genericMessageContent		[3] OCTET STRING,
-	...
-}
-
-NationalIPMMIRIParameters ::= SEQUENCE
-{
-	countryCode					[1] PrintableString (SIZE (2)),
-		-- Country Code according to ISO 3166-1 [16],
-		-- the country to which the parameters inserted after the extension marker apply.
-	...
-	-- In case a given country wants to use additional national parameters according to its law,
-	-- these national parameters should be defined using the ASN.1 syntax and added after the
-	-- extension marker (...).
-	-- It is recommended that "version parameter" and "vendor identification parameter" are
-	-- included in the national parameters definition. Vendor identifications can be
-	-- retrieved from the IANA web site (see Annex E Bibliography). Besides, it is recommended 
-	-- to avoid using tags from 240 to 255 in a formal type definition.
-}
-
-AdditionalSignalling ::= CHOICE
-{
-	sipHeaderLine				[0] OCTET STRING,
-		-- A SIP header line, eg: "Contact: tel:+123456789".
-	...
-}
-
-END -- end of IPMultimediaPDU
+-- ====================================
+-- Description of the IP Multimedia PDU
+-- ====================================
+
+
+IPMultimediaPDU 
+{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPMultimedia(5) version12(12)}
+
+DEFINITIONS IMPLICIT TAGS ::=
+BEGIN
+
+IMPORTS
+-- from ETSI TS 102 232-1 [2]
+    IPAddress,
+	Location
+		FROM LI-PS-PDU
+		{itu-u(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version30(30)};
+
+
+
+-- ============================
+-- Object Identifier Definition
+-- ============================
+
+iPMMIRIObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version12(12) iRI(1)}
+iPMMCCObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version12(12) cC(2)}
+	-- both definitions relative to: 
+	-- {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)}
+
+-- =====================================
+-- IP Multimedia Communications Contents
+-- =====================================
+
+IPMMCC ::= SEQUENCE
+{
+	iPMMCCObjId					[0] RELATIVE-OID,
+	mMCCContents				[1] OCTET STRING,
+		-- Copy of the multimediastream, i.e. all related RTP/RTCP, UDPTL or MSRP packets
+		-- Each IPMMCC shall contain one intercepted packet
+		-- Protocol of the multimedia packets is indicated by means of mMCCprotocol parameter
+		-- mMCCContents was called rTPCCContents in earlier versions until v2.3.2.
+	...,
+	frameType					[2] FrameType OPTIONAL,
+		-- The availability of header information shall be signalled with the frameType parameter
+		-- The module is defined as OPTIONAL because of backwards compatibility reasons
+		-- For new implementations the module is MANDATORY to be used as defined in clause 5.5
+	streamIdentifier			[3] OCTET STRING OPTIONAL,
+		-- Used to identify the media stream within the current CIN, typically in case of 
+		-- multiple media streams communications
+		-- May be used to correlate each media stream with the relevant SDP media description of IRI
+		-- May contain c= and m= lines extracts for instance
+	mMCCprotocol				[4] MMCCprotocol OPTIONAL
+		-- Used to identify the protocol of packets sent in MMCCContent (RTP, UDPTL, MSRP, etc.)
+		-- Absence means mMCCContents contains RTP/RTCP packets
+}
+
+FrameType ::= ENUMERATED
+{
+	ipFrame(0),
+		-- All headers are present
+	udpFrame(1),
+		-- IP header is missing
+	rtpFrame(2),
+		-- UDP and IP headers are missing
+	audioFrame(3),
+		-- All headers are missing
+	...,
+	tcpFrame(4),
+		-- IP header is missing
+	artificialRtpFrame(5),
+		-- UDP and IP headers are missing; artificial RTP frame has been added
+	udptlFrame(6),
+		-- UDP and IP headers are missing
+	msrpFrame(7)
+		-- TCP and IP headers are missing
+
+}
+
+MMCCprotocol ::= ENUMERATED
+{
+	rTP(0),
+		-- mMCCContents parameter contains RTP/RTCP packets
+	mSRP(1),
+		-- mMCCContents parameter contains MSRP packets
+	...,
+	uDPTL(2)
+		-- mMCCContents parameter contains UDPTL packets
+}
+
+-- ========================================================
+-- Intercept-related information for IP Multimedia sessions
+-- ========================================================
+
+IPMMIRI ::= SEQUENCE
+{
+	iPMMIRIObjId				[0] RELATIVE-OID,
+	iPMMIRIContents				[1] IPIRIContents,
+	...,
+	targetLocation				[2] Location OPTIONAL,
+		-- This common parameter is defined in ETSI TS 102 232-1 [2], the use of this parameter is described in clause 5.2.3
+	additionalSignalling		[3] SEQUENCE OF AdditionalSignalling OPTIONAL
+		-- The use of this parameter is defined in clause 5.2.5
+}
+
+IPIRIContents ::= CHOICE
+{
+	originalIPMMMessage			[0] OCTET STRING,
+		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
+	sIPMessage					[1] SIPMessage,
+		-- Copy of the SIP content and the source and destination IP address
+	h323Message					[2] H323Message,
+		-- Copy of the H.323 content and the source and destination IP address
+	...,
+	nationalIPMMIRIParameters	[3] NationalIPMMIRIParameters,
+		-- This parameter is used according to national regulations
+		-- This parameter shall be delivered as an IRI-Report-record	
+	xCAPMessage					[4] OCTET STRING,
+		-- Copy of the XCAP message including all HTTP headers and contents
+	iRIOnlyOriginalIPMMMessage	[5] OCTET STRING,
+		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
+		-- see clause 5.2.6.
+	iRIOnlySIPMessage			[6] SIPMessage
+		-- Copy of the SIP content and the source and destination IP address
+		-- see clause 5.2.6.
+}
+
+SIPMessage ::= SEQUENCE
+{
+	iPSourceAddress				[0] IPAddress,
+	iPDestinationAddress		[1] IPAddress,
+	sIPContent					[2] OCTET STRING,
+	...
+}
+
+H323Message ::= SEQUENCE
+{
+	iPSourceAddress				[0] IPAddress,
+	iPDestinationAddress		[1] IPAddress,
+	h323Content					[2] H323MessageContent,
+	...
+}
+
+H323MessageContent ::= CHOICE
+{
+	h225CSMessageContent		[0] OCTET STRING,
+	h225RASMessageContent		[1] OCTET STRING,
+	h245MessageContent			[2] OCTET STRING,
+	genericMessageContent		[3] OCTET STRING,
+	...
+}
+
+NationalIPMMIRIParameters ::= SEQUENCE
+{
+	countryCode					[1] PrintableString (SIZE (2)),
+		-- Country Code according to ISO 3166-1 [20],
+		-- the country to which the parameters inserted after the extension marker apply.
+	...
+	-- In case a given country wants to use additional national parameters according to its law,
+	-- these national parameters should be defined using the ASN.1 syntax and added after the
+	-- extension marker (...).
+	-- It is recommended that "version parameter" and "vendor identification parameter" are
+	-- included in the national parameters definition. Vendor identifications can be
+	-- retrieved from the IANA web site. Besides, it is recommended 
+	-- to avoid using tags from 240 to 255 in a formal type definition.
+}
+
+AdditionalSignalling ::= CHOICE
+{
+	sipHeaderLine				[0] OCTET STRING,
+		-- A SIP header line, eg: "Contact: tel:+123456789".
+	...
+}
+
+END -- end of IPMultimediaPDU

102232-5/portal/IPMultimediaPDU,ver11.txt

--- ====================================
--- Description of the IP Multimedia PDU
--- ====================================
-
-
-IPMultimediaPDU 
-{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPMultimedia(5) version11(11)}
-
-DEFINITIONS IMPLICIT TAGS ::=
-BEGIN
-
-IMPORTS
-	-- from ETSI TS 102 232-1 [2]
-    IPAddress,
-	Location
-		FROM LI-PS-PDU
-		{itu-u(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version26(26)};
-
-
-
--- ============================
--- Object Identifier Definition
--- ============================
-
-iPMMIRIObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version11(11) iRI(1)}
-iPMMCCObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version11(11) cC(2)}
-	-- both definitions relative to: 
-	-- {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)}
-
--- =====================================
--- IP Multimedia Communications Contents
--- =====================================
-
-IPMMCC ::= SEQUENCE
-{
-	iPMMCCObjId					[0] RELATIVE-OID,
-	mMCCContents				[1] OCTET STRING,
-		-- Copy of the multimediastream, i.e. all related RTP/RTCP, UDPTL or MSRP packets
-		-- Each IPMMCC shall contain one intercepted packet
-		-- Protocol of the multimedia packets is indicated by means of mMCCprotocol parameter
-		-- mMCCContents was called rTPCCContents in earlier versions until v2.3.2.
-	...,
-	frameType					[2] FrameType OPTIONAL,
-		-- The availability of header information shall be signalled with the frameType parameter
-		-- The module is defined as OPTIONAL because of backwards compatibility reasons
-		-- For new implementations the module is MANDATORY to be used as defined in clause 5.5
-	streamIdentifier			[3] OCTET STRING OPTIONAL,
-		-- Used to identify the media stream within the current CIN, typically in case of 
-		-- multiple media streams communications
-		-- May be used to correlate each media stream with the relevant SDP media description of IRI
-		-- May contain c= and m= lines extracts for instance
-	mMCCprotocol				[4] MMCCprotocol OPTIONAL
-		-- Used to identify the protocol of packets sent in MMCCContent (RTP, UDPTL, MSRP, etc.)
-		-- Absence means mMCCContents contains RTP/RTCP packets
-}
-
-FrameType ::= ENUMERATED
-{
-	ipFrame(0),
-		-- All headers are present
-	udpFrame(1),
-		-- IP header is missing
-	rtpFrame(2),
-		-- UDP and IP headers are missing
-	audioFrame(3),
-		-- All headers are missing
-	...,
-	tcpFrame(4),
-		-- IP header is missing
-	artificialRtpFrame(5),
-		-- UDP and IP headers are missing, artificial RTP frame has been added
-	udptlFrame(6),
-		-- UDP and IP headers are missing
-	msrpFrame(7)
-		-- TCP and IP headers are missing
-
-}
-
-MMCCprotocol ::= ENUMERATED
-{
-	rTP(0),
-		-- mMCCContents parameter contains RTP/RTCP packets
-	mSRP(1),
-		-- mMCCContents parameter contains MSRP packets
-	...,
-	uDPTL(2)
-		-- mMCCContents parameter contains UDPTL packets
-}
-
--- ========================================================
--- Intercept-related information for IP Multimedia sessions
--- ========================================================
-
-IPMMIRI ::= SEQUENCE
-{
-	iPMMIRIObjId				[0] RELATIVE-OID,
-	iPMMIRIContents				[1] IPIRIContents,
-	...,
-	targetLocation				[2] Location OPTIONAL,
-		-- This common parameter is defined in TS 102 232-1 [2], the use of this parameter is described in clause 5.2.3
-	additionalSignalling		[3] SEQUENCE OF AdditionalSignalling OPTIONAL
-		-- The use of this parameter is defined in clause 5.2.5
-}
-
-IPIRIContents ::= CHOICE
-{
-	originalIPMMMessage			[0] OCTET STRING,
-		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
-	sIPMessage					[1] SIPMessage,
-		-- Copy of the SIP content and the source and destination IP address
-	h323Message					[2] H323Message,
-		-- Copy of the H.323 content and the source and destination IP address
-	...,
-	nationalIPMMIRIParameters	[3] NationalIPMMIRIParameters,
-		-- This parameter is used according to national regulations
-		-- This parameter shall be delivered as an IRI-Report-record	
-	xCAPMessage					[4] OCTET STRING		
-		-- Copy of the XCAP message including all HTTP headers and contents
-}
-
-SIPMessage ::= SEQUENCE
-{
-	iPSourceAddress				[0] IPAddress,
-	iPDestinationAddress		[1] IPAddress,
-	sIPContent					[2] OCTET STRING,
-	...
-}
-
-H323Message ::= SEQUENCE
-{
-	iPSourceAddress				[0] IPAddress,
-	iPDestinationAddress		[1] IPAddress,
-	h323Content					[2] H323MessageContent,
-	...
-}
-
-H323MessageContent ::= CHOICE
-{
-	h225CSMessageContent		[0] OCTET STRING,
-	h225RASMessageContent		[1] OCTET STRING,
-	h245MessageContent			[2] OCTET STRING,
-	genericMessageContent		[3] OCTET STRING,
-	...
-}
-
-NationalIPMMIRIParameters ::= SEQUENCE
-{
-	countryCode					[1] PrintableString (SIZE (2)),
-		-- Country Code according to ISO 3166-1 [16],
-		-- the country to which the parameters inserted after the extension marker apply.
-	...
-	-- In case a given country wants to use additional national parameters according to its law,
-	-- these national parameters should be defined using the ASN.1 syntax and added after the
-	-- extension marker (...).
-	-- It is recommended that "version parameter" and "vendor identification parameter" are
-	-- included in the national parameters definition. Vendor identifications can be
-	-- retrieved from the IANA web site (see Annex E Bibliography). Besides, it is recommended 
-	-- to avoid using tags from 240 to 255 in a formal type definition.
-}
-
-AdditionalSignalling ::= CHOICE
-{
-	sipHeaderLine				[0] OCTET STRING,
-		-- A SIP header line, eg: "Contact: tel:+123456789".
-	...
-}
-
-END -- end of IPMultimediaPDU

102232-5/portal/IPMultimediaPDU,ver12.txt

+-- ====================================
+-- Description of the IP Multimedia PDU
+-- ====================================
+
+
+IPMultimediaPDU 
+{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPMultimedia(5) version12(12)}
+
+DEFINITIONS IMPLICIT TAGS ::=
+BEGIN
+
+IMPORTS
+-- from ETSI TS 102 232-1 [2]
+    IPAddress,
+	Location
+		FROM LI-PS-PDU
+		{itu-u(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version30(30)};
+
+
+
+-- ============================
+-- Object Identifier Definition
+-- ============================
+
+iPMMIRIObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version12(12) iRI(1)}
+iPMMCCObjId RELATIVE-OID			::= {li-ps(5) iPMultimedia(5) version12(12) cC(2)}
+	-- both definitions relative to: 
+	-- {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)}
+
+-- =====================================
+-- IP Multimedia Communications Contents
+-- =====================================
+
+IPMMCC ::= SEQUENCE
+{
+	iPMMCCObjId					[0] RELATIVE-OID,
+	mMCCContents				[1] OCTET STRING,
+		-- Copy of the multimediastream, i.e. all related RTP/RTCP, UDPTL or MSRP packets
+		-- Each IPMMCC shall contain one intercepted packet
+		-- Protocol of the multimedia packets is indicated by means of mMCCprotocol parameter
+		-- mMCCContents was called rTPCCContents in earlier versions until v2.3.2.
+	...,
+	frameType					[2] FrameType OPTIONAL,
+		-- The availability of header information shall be signalled with the frameType parameter
+		-- The module is defined as OPTIONAL because of backwards compatibility reasons
+		-- For new implementations the module is MANDATORY to be used as defined in clause 5.5
+	streamIdentifier			[3] OCTET STRING OPTIONAL,
+		-- Used to identify the media stream within the current CIN, typically in case of 
+		-- multiple media streams communications
+		-- May be used to correlate each media stream with the relevant SDP media description of IRI
+		-- May contain c= and m= lines extracts for instance
+	mMCCprotocol				[4] MMCCprotocol OPTIONAL
+		-- Used to identify the protocol of packets sent in MMCCContent (RTP, UDPTL, MSRP, etc.)
+		-- Absence means mMCCContents contains RTP/RTCP packets
+}
+
+FrameType ::= ENUMERATED
+{
+	ipFrame(0),
+		-- All headers are present
+	udpFrame(1),
+		-- IP header is missing
+	rtpFrame(2),
+		-- UDP and IP headers are missing
+	audioFrame(3),
+		-- All headers are missing
+	...,
+	tcpFrame(4),
+		-- IP header is missing
+	artificialRtpFrame(5),
+		-- UDP and IP headers are missing; artificial RTP frame has been added
+	udptlFrame(6),
+		-- UDP and IP headers are missing
+	msrpFrame(7)
+		-- TCP and IP headers are missing
+
+}
+
+MMCCprotocol ::= ENUMERATED
+{
+	rTP(0),
+		-- mMCCContents parameter contains RTP/RTCP packets
+	mSRP(1),
+		-- mMCCContents parameter contains MSRP packets
+	...,
+	uDPTL(2)
+		-- mMCCContents parameter contains UDPTL packets
+}
+
+-- ========================================================
+-- Intercept-related information for IP Multimedia sessions
+-- ========================================================
+
+IPMMIRI ::= SEQUENCE
+{
+	iPMMIRIObjId				[0] RELATIVE-OID,
+	iPMMIRIContents				[1] IPIRIContents,
+	...,
+	targetLocation				[2] Location OPTIONAL,
+		-- This common parameter is defined in ETSI TS 102 232-1 [2], the use of this parameter is described in clause 5.2.3
+	additionalSignalling		[3] SEQUENCE OF AdditionalSignalling OPTIONAL
+		-- The use of this parameter is defined in clause 5.2.5
+}
+
+IPIRIContents ::= CHOICE
+{
+	originalIPMMMessage			[0] OCTET STRING,
+		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
+	sIPMessage					[1] SIPMessage,
+		-- Copy of the SIP content and the source and destination IP address
+	h323Message					[2] H323Message,
+		-- Copy of the H.323 content and the source and destination IP address
+	...,
+	nationalIPMMIRIParameters	[3] NationalIPMMIRIParameters,
+		-- This parameter is used according to national regulations
+		-- This parameter shall be delivered as an IRI-Report-record	
+	xCAPMessage					[4] OCTET STRING,
+		-- Copy of the XCAP message including all HTTP headers and contents
+	iRIOnlyOriginalIPMMMessage	[5] OCTET STRING,
+		-- Copy of the IP MM signalling packet including the original IP and UDP/TCP headers
+		-- see clause 5.2.6.
+	iRIOnlySIPMessage			[6] SIPMessage
+		-- Copy of the SIP content and the source and destination IP address
+		-- see clause 5.2.6.
+}
+
+SIPMessage ::= SEQUENCE
+{
+	iPSourceAddress				[0] IPAddress,
+	iPDestinationAddress		[1] IPAddress,
+	sIPContent					[2] OCTET STRING,