Newer
Older
-- this will be an RFC822-style address
-- NOTE as of v1.2.1, this field has changed from OCTET STRING to UTF8String
MsgProviderID ::= UTF8String
-- Unique identifier for a service provider, e.g. company name
-- NOTE as of v1.2.1, this field has changed from OCTET STRING to UTF8String
-- ====================================
-- Definitions of Message Service Usage
-- ====================================
MsgServiceUsage ::= CHOICE
-- Choice of different types of activities
-- Manipulation of stored address books is outside the scope
{
msgTransmission [1] MsgTransmission,
msgStoreOperation [2] MsgStoreOperation,
...
}
MsgTransmission ::= SEQUENCE
-- Sending of an outgoing message, or reception of an incoming message
{
dateTime [1] GeneralizedTime OPTIONAL,
subscriberID [2] MsgSubscriberID OPTIONAL,
senderAddress [3] MsgAddress OPTIONAL,
recipients [4] SEQUENCE OF MsgAddress OPTIONAL,
msgStores [5] SEQUENCE OF MsgStoreID OPTIONAL,
-- List of all local msgStores that received a copy of the message
-- For transit messages this field is not used
deliveryStatus [6] ENUMERATED
{
unknown(0),
succeeded(1),
-- Delivery might still fail at a subsequent mail server
failed(2),
-- E.g. when mailbox quota exceeded (mailbox full)
retried(3),
-- Deferred and retried at a later time
...
} OPTIONAL,
protocol [7] ENUMERATED
{
smtp(0),
x400(1),
...
} OPTIONAL,
clientID [8] IPAddress OPTIONAL,
serverID [9] IPAddress OPTIONAL,
...,
messageID [10] MessageID OPTIONAL,
sourceServerName [11] UTF8String OPTIONAL,
destinationServerName [12] UTF8String OPTIONAL
}
MsgStoreOperation ::= SEQUENCE
-- Manipulation of a message store.
{
dateTime [1] GeneralizedTime OPTIONAL,
subscriberID [2] MsgSubscriberID OPTIONAL,
msgStore [3] MsgStoreID OPTIONAL,
operation [4] ENUMERATED
{
connect(0),
-- Successful authorization for access to msgStore
disconnect(1),
retrieveMsg(2),
-- Viewing msg using a webmail client is also considered retrieval
partialretrieveMsg(3),
-- E.g. the TOP command in POP3
deleteMsg(4),
addMsg(5),
-- E.g. the APPEND command in IMAP
...,
editMsg(6)
} OPTIONAL,
senderAddress [5] MsgAddress OPTIONAL,
-- For Internet email, use the From address in the mail headers
recipients [6] SEQUENCE OF MsgAddress OPTIONAL,
-- For Internet email, use the To, CC, and BCC addresses in the mail headers
protocol [7] ENUMERATED
{
pop(0),
imap(1),
...,
webmail(2)
} OPTIONAL,
clientID [8] IPAddress OPTIONAL,
serverID [9] IPAddress OPTIONAL,
...,
messageID [10] MessageID OPTIONAL
}
MessageID ::= UTF8String
-- Unique identifier for this message, e.g RFC 822 header
NetworkAccessRecord::= CHOICE
{
naSubscriber [1] NASubscriber,
naServiceUsage [2] NAServiceUsage,
naDevice [3] NADevice,
naNetworkElement [4] NANwElement,
naBillingDetails [5] NABillingDetails,
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
...
}
-- =============================================
-- Definitions of Network Access Subscriber Data
-- =============================================
NAProviderID ::= UTF8String
NAAuthID ::= UTF8String
NaSubscriberID ::= UTF8String
NASubscriber ::= SEQUENCE
-- Generic information on a service subscriber, supplemented with information specific to
-- network access services.
{
validity [1] TimeSpan OPTIONAL,
subscriberID [2] NaSubscriberID OPTIONAL,
-- Unique identifier for this subscriber, e.g. account number
naSubscriptions [3] SEQUENCE OF NAServiceSubscription OPTIONAL,
-- List of all known services subscribed to by this user
allocatedDeviceIDs [4] SEQUENCE OF NADeviceId OPTIONAL,
-- List of all known devices allocated to this user.
subscriber [5] GenericSubscriberInfo OPTIONAL ,
-- Name, address and other generic subscriber information
...
}
NAServiceSubscription ::= SEQUENCE
-- Description of the subscription to a Network Access service
{
validity [1] TimeSpan OPTIONAL,
naServiceID [2] UTF8String OPTIONAL,
-- Identifier for the service, e.g. account plan name.
naProviderID [3] NAProviderID OPTIONAL,
-- Unique identifier for the provider of the service, e.g. company name
naAuthID [4] NAAuthID OPTIONAL,
-- Unique identifier for this subscription, e.g. logon name
options [5] UTF8String OPTIONAL,
-- Human readable text with restrictions or options to the subscription
installationAddress [6] AddressInformation OPTIONAL,
fixIpAddress [7] IPAddress OPTIONAL,
-- fix assigned IP address
imsi [8] IMSI OPTIONAL,
...
}
-- ===========================================
-- Definitions of Network Access Service Usage
-- ===========================================
NAServiceUsage ::= SEQUENCE
{
naAccessTime [1] GeneralizedTime OPTIONAL,
-- Time of connection to the NAS
naAuthID [2] NAAuthID OPTIONAL,
-- Username used to obtain network access
nwAccessType [3] NwAccessType OPTIONAL,
-- Type of network access attempted. If not undefined(0), this should be one of the types
-- supported by the NAS (identified below by naNwElementID)
naStatus [4] ENUMERATED
{
unknown(0),
succeeded(1),
-- Authentication OK and access granted
failed(2),
-- Authentication failure (wrong credentials or time out)
rejected(3),
-- Rejected by the CSP (e.g. usage limits exceeded)
...
} OPTIONAL,
interval [5] TimeSpan OPTIONAL,
-- Start time and end time (duration) of network access.
naDeviceId [6] NADeviceId OPTIONAL,
-- Device used to access the service
naNwElementID [7] NANwElementID OPTIONAL,
-- Network element (NAS) onto which the naDevice is connected
naAssignedAddress [8] SEQUENCE OF NAAssignedAddress OPTIONAL,
-- IP address assigned by the network access service. May be fixed or dynamic
location [9] Location OPTIONAL,
-- Location of the access (for e.g. GPRS handsets)
dialUpInformation [10] DialUpInformation OPTIONAL,
gprsInformation [11] GprsInformation OPTIONAL,
...
}
NwAccessType ::= ENUMERATED
{
undefined(0),
dialUp(1),
-- DialUp access
xDSL(2),
-- DSL access
cableModem(3),
-- Cable access
lAN(4),
-- LAN access
wirelessLAN(5),
-- Wireless LAN access (e.g. hotspot)
wimax(6),
mobilePacketData(7),
-- Network access over GSM/3GPP GPRS, UMTS, etc.
...
}
DialUpInformation ::= SEQUENCE
{
diallingNumber [1] PartyNumber OPTIONAL,
-- Telephone number used for dial-up access
dialledNumber [2] PartyNumber OPTIONAL,
callback [3] PartyNumber OPTIONAL,
-- Call back number used for dial-up access
...
}
GprsInformation ::= SEQUENCE
{
iMSI [1] IMSI OPTIONAL,
mSISDN [2] PartyNumber OPTIONAL,
sgsnAddress [3] SEQUENCE OF IPAddress OPTIONAL,
ggsnAddress [4] IPAddress OPTIONAL,
pDP-address-allocated [5] IPAddress OPTIONAL,
aPN [6] UTF8String OPTIONAL,
pDP-type [7] OCTET STRING (SIZE(2)) OPTIONAL,
-- format as per TS 101 671 [6]
...,
gPRSEvent [8] GPRSEvent OPTIONAL
-- format as per 3GPP TS 33.108 [11]
}
GPRSEvent ::= ENUMERATED
{
pDPContextActivation(1),
pDPContextDeactivation(4),
gPRSAttach(5),
gPRSDetach(6),
locationInfoUpdate(10),
-- sMS ommited from 3GPP TS 33.108 [11],
pDPContextModification(11),
servingSystem(12),
...
}
-- ====================================
-- Definitions of Network Access Device
-- ====================================
NADeviceId ::= UTF8String
NADevice ::= SEQUENCE
{
naDeviceId [1] NADeviceId OPTIONAL,
-- Identifier of this device.
description [2] UTF8String OPTIONAL,
-- Human readable description of device
location [3] Location OPTIONAL,
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
macAddress [4] OCTET STRING (SIZE (6)) OPTIONAL,
-- MAC or ethernet address
dslID [5] UTF8String OPTIONAL,
imei [6] IMEI OPTIONAL,
...
}
IMEI ::= OCTET STRING (SIZE(8))
-- format as per TS GSM 09.02 [8]
IMSI ::= OCTET STRING (SIZE(3..8))
-- format as per TS GSM 09.02 [8]
-- ======================================
-- Definitions of Message Network element
-- ======================================
NANwElementID ::= UTF8String
NANwElement ::= SEQUENCE
-- In this context, the network element is more commonly referred to as NAS
{
validity [1] TimeSpan OPTIONAL,
-- Period for which this interval is valid
naNwElementID [2] NANwElementID OPTIONAL,
-- Unique ID of this NAS (Network Access Server)
naProviderID [3] NAProviderID OPTIONAL,
-- Unique identifier of the provider managing this NAS.
supportedAccessTypes [4] SEQUENCE OF NwAccessType OPTIONAL,
location [5] Location OPTIONAL,
...
}
IPAddress ::= CHOICE
{
iPv4BinaryAddress [1] OCTET STRING (SIZE(4)),
iPv6BinaryAddress [2] OCTET STRING (SIZE(16)),
iPTextAddress [3] IA5String (SIZE(7..45)),
...
}
NAAssignedAddress ::= SEQUENCE
{
addressSetOrRangeOrMask [1] IPAddressSetOrRangeOrMask OPTIONAL,
portNumber [2] INTEGER OPTIONAL,
-- populated with the outbound port number
addressType [3] ENUMERATED
unknown(0),
internal(1),
external(2),
...
} OPTIONAL,
assignedTime [4] TimeSpan OPTIONAL,
...,
destinationAddress [5] IPAddress OPTIONAL,
-- used in cases where a single external IP/port pair is translated to multiple internal
-- IP/port pairs, with the destination IP/port used to multiplex them
destinationPort [6] INTEGER OPTIONAL
-- used in cases where a single external IP/port pair is translated to multiple internal
-- IP/port pairs, with the destination IP/port used to multiplex them
}
IPAddressSetOrRangeOrMask ::= CHOICE
{
set [0] SEQUENCE OF IPAddress,
range [1] IPRange,
mask [2] IPMask
}
IPRange ::= SEQUENCE
-- Things like 172.16.10.0/26
{
prefix [0] IPAddress,
subnetlength [1] INTEGER (1..128)
}
IPMask ::= SEQUENCE
-- Things like 172.16.10.0/255.255.255.240
{
base [0] IPAddress,
mask [1] IPAddress
}
NABillingDetails ::= SEQUENCE
{
subscriberID [1] NaSubscriberID OPTIONAL,
serviceID [2] UTF8String OPTIONAL,
billingAddress [3] ContactDetails OPTIONAL,
billingIdentifier [4] BillingIdentifier OPTIONAL,
billingRecords [5] SEQUENCE OF BillingRecords OPTIONAL,
...
}
END -- end of RDMessage