RDMessage.asn

NationalTelephonyDevice ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

TelephonyDeviceID ::= OCTET STRING
	-- A unique identifier for the telephony device. For example, the IMEI number 
	-- of a mobile handset

-- ========================
-- Network Data definitions
-- ========================

TelephonyNetworkElement ::= SEQUENCE
{
	telephonyNetworkID					[1] TelephonyNetworkID OPTIONAL,
	cellInformation						[2] Location OPTIONAL,
		-- The Location information id 
	validity							[3] TimeSpan OPTIONAL, 
	...,
	nationalTelephonyNetworkElement		[4] NationalTelephonyNetworkElement OPTIONAL,
		-- To be defined on a national basis 
		-- Only to be used in case the present document cannot fulfil the national requirements
	transmitterDetails					[5] TransmitterDetails OPTIONAL
}

NationalTelephonyNetworkElement ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

TelephonyNetworkID ::= OCTET STRING
	-- Unique identifier for this network element: e.g. a Cell ID

TransmitterDetails ::= SEQUENCE
{
	alternativeID					[1] UTF8String OPTIONAL,
	-- For use by CSPs with an alternative naming scheme for cells
	beamWidth						[2] INTEGER OPTIONAL,
	-- beam width in degrees
	-- note that the beam bearing is given in the gsmLocation Azimuth field
	radiatedPower					[3] INTEGER OPTIONAL,
	-- Effective radiated power in watts.
	antennaHeight					[4] INTEGER OPTIONAL,
	-- Height of antenna from ground in metres
	range							[5] INTEGER OPTIONAL,
	-- Indication of range or radius of cell or sector coverage, in metres
	-- Precise definition is to be decided on a national basis (e.g. distance
	-- at which some fixed percentage of calls are connected)
	frequency						[6] INTEGER OPTIONAL,
	-- transmitter frequency in kHz
	technology						[7] TransmitterTechnology OPTIONAL,
	nationalTransmitterDetails		[8] NationalTransmitterDetails OPTIONAL,
	...
}

TransmitterTechnology	::= ENUMERATED
{
	gen2G(0),
	gen3G(1),
	...
}

NationalTransmitterDetails	::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

-- ====================
-- Location information
-- ====================

Location ::= SEQUENCE
{
	e164-Number			[1] OCTET STRING (SIZE (1..25)) OPTIONAL,
		-- Coded in the same format as the ISUP location number (parameter
		-- field) of the ISUP (see EN 300 356 [7])
	globalCellID		[2] OCTET STRING (SIZE (5..7)) OPTIONAL,
		-- See MAP format (see 3GPP TS 09.02 [8])
	rAI					[3] OCTET STRING (SIZE (6)) OPTIONAL,
		-- The Routeing Area Identifier (RAI) in the current SGSN is coded in accordance with
		-- 3GPP TS 24.008 [9] without the Routing Area Identification IEI (only the
		-- last 6 octets are used)
	gsmLocation			[4] GSMLocation OPTIONAL,
	umtsLocation		[5] UMTSLocation OPTIONAL,
	sAI					[6] OCTET STRING (SIZE (7)) OPTIONAL,
		-- format:	PLMN-ID	3 octets (no. 1-3)
		-- 			LAC		2 octets (no. 4-5)
		-- 			SAC		2 octets (no. 6-7)
		-- 			(according to 3GPP TS 25.413 [31])
	oldRAI				[7] OCTET STRING (SIZE (6)) OPTIONAL,
		-- the "Routeing Area Identifier" in the old SGSN is coded in accordance with
		-- 3GPP TS 24.008 [9] without the Routing Area Identification IEI
		-- (only the last 6 octets are used)
		-- This parameter is duplicated from 3GPP TS 33.108 [11]
	...,
	postalLocation		[8] AddressInformation OPTIONAL,
	extendedLocation	[9] ExtendedLocation OPTIONAL
}

GSMLocation ::= CHOICE
{
	geoCoordinates 		[1] SEQUENCE
	{
		latitude	[1] UTF8String (SIZE(7..10)) OPTIONAL,
			-- format: XDDMMSS.SS
		longitude	[2] UTF8String (SIZE(8..11)) OPTIONAL,
			-- format: XDDDMMSS.SS
		mapDatum	[3] MapDatum OPTIONAL,
		azimuth		[4] INTEGER (0..359) OPTIONAL,
			-- The azimuth is the bearing, relative to true north
		...
	},
		-- format: XDDMMSS.SS (on latitudes) or XDDDMMSS.SS (on longitudes)
		-- 		X			: N(orth), S(outh), E(ast), W(est)
		-- 		DD or DDD 	: degrees (numeric characters)
		-- 		MM			: minutes (numeric characters)
		-- 		SS.SS 		: seconds, the second part (.SS) is optional
		-- Example:
		-- 		latitude (short form)		N502312
		-- 		longitude (long form)		E1122312.18
	utmCoordinates		[2] SEQUENCE
	{
		utm-Zone	[1] UTF8String (SIZE(3)) OPTIONAL,
		utm-East 	[2] UTF8String (SIZE(6)) OPTIONAL,
		utm-North 	[3] UTF8String (SIZE(7)) OPTIONAL,
			-- Universal Transverse Mercator
			-- example	utm-Zone	32U
			-- 			utm-East	439955
			-- 			utm-North	5540736
		mapDatum	[4] MapDatum OPTIONAL,
		azimuth		[5] INTEGER (0..359) OPTIONAL,
			-- The azimuth is the bearing, relative to true north
		...
	},
	utmRefCoordinates	[3] SEQUENCE
	{
		utm-GridZone				[1] UTF8String (SIZE(2)) OPTIONAL,
			-- numerals from 1 to 60
		utm-GridBand				[2] UTF8String (SIZE(1)) OPTIONAL,
			-- character between C and X
		squareID					[3] UTF8String (SIZE(2)) OPTIONAL,
			-- characters from A to Z
		numericalLocationEasting	[4] UTF8String (SIZE(5)) OPTIONAL,
		numericalLocationNorthing	[5] UTF8String (SIZE(5)) OPTIONAL,
			-- Universal Transverse Mercator Reference = Military Grid Reference System (MGRS)
			-- example	utm-GridZone				32
			--			utm-GridBand				U
			--			squareID					PU
			--			numericalLocationEasting	9129
			--			mumericalLocationNorthing	4045
			-- In both panels, utm-GridBand and squareID the 'I' and 'O' characters are not used 
			-- because of their similarity to the digits one and zero.
		mapDatum				[6] MapDatum OPTIONAL,
		azimuth					[7] INTEGER (0..359) OPTIONAL,
			-- The azimuth is the bearing, relative to true north
		...
	},
	wGS84Coordinates 	[4] OCTET STRING,
		-- format is as defined in 3GPP TS 03.32 [12]
	...,
	geoCoordinatesDec 	[5] SEQUENCE
	{
		latitudeDec		[1] UTF8String (SIZE(3..12)) OPTIONAL,
			-- format: XDD.nnnnnnnn
		longitudeDec	[2] UTF8String (SIZE(4..13)) OPTIONAL,
			-- format: XDDD.nnnnnnnn
		mapDatum		[3] MapDatum OPTIONAL,
		azimuth			[4] INTEGER (0..359) OPTIONAL,
			-- The azimuth is the bearing, relative to true north
		...
	}
		-- format: XDD.nnnnnnnn (on latitudes) or XDDD.nnnnnnnn (on longitudes)
		-- 		X			: N(orth), S(outh), E(ast), W(est)
		-- 		DD or DDD 	: degrees (numeric characters)
		-- 		nnnnnnnn	: post decimal positions (numeric characters)
		-- Example:
		-- 		latitude		N50.38666667
		-- 		longitude		E112.38671670
}

MapDatum ::= ENUMERATED
{
	wGS84(1),
		-- World Geodetic System 1984
	wGS72(2),
	eD50(3),
		-- European Datum 50
	rD(4),
		-- Rijks Driehoek (Netherlands)
	potsdamDatum(5),
	datumAustria(6),
	eTRS89(7),
		-- European Terrestrial Reference System 1989
	nAD27(8),
		-- North American Datum 1927
	oSGB36(9),
		-- Ordnance Survey of Great Britain
	oSNI52(10),
		-- Ordnance Survey of Northern Ireland
	tM65(11),
	iTM(12),
		-- Irish Transverse Mercator
	...,
	cH1903(13)
		-- Swiss reference system
}

UMTSLocation ::= CHOICE
{
	point					[1] GA-Point,
	pointWithUnCertainty	[2] GA-PointWithUnCertainty,
	polygon					[3] GA-Polygon,
	...
}

GeographicalCoordinates ::= SEQUENCE
{
	latitudeSign	[1] ENUMERATED
	{
		north(0),
		south(1)
	} OPTIONAL,
	latitude		[2] INTEGER (0..8388607) OPTIONAL,
	longitude		[3] INTEGER (-8388608..8388607) OPTIONAL,
	...,
	mapDatum		[4] MapDatum OPTIONAL,
	azimuth			[5] INTEGER (0..359) OPTIONAL
		-- The azimuth is the bearing, relative to true north
}

GA-Point ::= SEQUENCE
{
	geographicalCoordinates		[1] GeographicalCoordinates,
	...
}

GA-PointWithUnCertainty ::=SEQUENCE
{
	geographicalCoordinates		[1] GeographicalCoordinates,
	uncertaintyCode				[2] INTEGER (0..127)
}

maxNrOfPoints					INTEGER ::= 15

GA-Polygon ::= SEQUENCE (SIZE (1..maxNrOfPoints)) OF GA-Polygon-Elements

GA-Polygon-Elements ::= SEQUENCE
{
	geographicalCoordinates		[1] GeographicalCoordinates,
	...
}

ExtendedLocation ::= CHOICE
{
	spot			[1] Spot,
	circle			[2] Circle,
	region			[3] Region,
	route			[4] Route,
	...
}

Spot ::= CHOICE
{
	gsmLocation			[1] GSMLocation,
	postalLocation		[2] AddressInformation,
	...
}

Circle ::= SEQUENCE
{
	centre				[1] Spot,
	radius				[2] HorizontalExtent,
	...
}

Region ::= SEQUENCE
{
	cornerMarks			[1] SEQUENCE OF Spot,
	...
}

Route ::= SEQUENCE
{
	routeMarks			[1] SEQUENCE OF Spot,
	width				[2] HorizontalExtent OPTIONAL,
	...
}

HorizontalExtent ::= INTEGER 
	-- metres

-- ===================
-- General definitions
-- ===================

PartyNumber ::= UTF8String
	-- E.164 address of the party in international format
MessageRecord ::= CHOICE
{
	msgSubscriber			[1] MsgSubscriber,
	msgServiceUsage			[2] MsgServiceUsage,
	...,
	msgBillingDetails		[3] MsgBillingDetails
}

-- ======================================
-- Definitions of Message Subscriber Data
-- ======================================

MsgSubscriber ::= SEQUENCE
	-- Generic information on a service subscriber, supplemented with information specific to
	-- asynchronous message services
{
	validity		[1] TimeSpan OPTIONAL,
	subscriberID	[2] MsgSubscriberID OPTIONAL,
	msgStores		[3] SEQUENCE OF MsgStore OPTIONAL,
		-- message stores allocated to this subscriber
	subscriber		[4] GenericSubscriberInfo OPTIONAL,
	...,
	paymentDetails	[5] PaymentDetails OPTIONAL
}

MsgSubscriberID ::= OCTET STRING
	-- Unique identifier for this subscriber, e.g. account number

MsgStore ::= SEQUENCE
	-- Location into which messages are temporarily stored. All asynchronous message services by
	-- definition require some message store. E.g. in the case of e-mail this will be a mailbox
{
	validity		[1] TimeSpan OPTIONAL,
	msgStoreID		[2] MsgStoreID OPTIONAL,
	aliases			[3] SEQUENCE OF MsgAddress OPTIONAL,
		-- The complete list of all addresses that get delivered into this message store.
	providerID		[4] MsgProviderID OPTIONAL,
	...
}

MsgStoreID ::= OCTET STRING
    -- Unique identifier of the message store. Since not all IDs will necessarily be human
    -- readable, a generic byte string is used

MsgAddress ::= UTF8String
    -- Messaging address, an address to which messages can be sent. In the case of Internet e-mail
    -- this will be an RFC822-style address
    -- NOTE – as of v1.2.1, this field has changed from OCTET STRING to UTF8String

MsgProviderID ::= UTF8String
	-- Unique identifier for a service provider, e.g. company name
     -- NOTE – as of v1.2.1, this field has changed from OCTET STRING to UTF8String

-- ====================================
-- Definitions of Message Service Usage
-- ====================================

MsgServiceUsage ::= CHOICE
	-- Choice of different types of activities
	-- Manipulation of stored address books is outside the scope
{
	msgTransmission		[1] MsgTransmission,
	msgStoreOperation	[2] MsgStoreOperation,
	...
}

MsgTransmission ::= SEQUENCE
	-- Sending of an outgoing message, or reception of an incoming message
{
	dateTime				[1] GeneralizedTime OPTIONAL,
	subscriberID			[2] MsgSubscriberID OPTIONAL,
	senderAddress			[3] MsgAddress OPTIONAL,
	recipients				[4] SEQUENCE OF MsgAddress OPTIONAL,
	msgStores				[5] SEQUENCE OF MsgStoreID OPTIONAL,
		-- List of all local msgStores that received a copy of the message
		-- For transit messages this field is not used
	deliveryStatus			[6] ENUMERATED
	{
		unknown(0),
		succeeded(1),
			-- Delivery might still fail at a subsequent mail server
		failed(2),
			-- E.g. when mailbox quota exceeded (mailbox full)
		retried(3),
			-- Deferred and retried at a later time
		...
	} OPTIONAL,
	protocol				[7] ENUMERATED
	{
		smtp(0),
		x400(1),
		...
	} OPTIONAL,
	clientID				[8] IPAddress OPTIONAL,
	serverID				[9] IPAddress OPTIONAL,
	...,
	messageID				[10] MessageID OPTIONAL,
	sourceServerName		[11] UTF8String OPTIONAL,
	destinationServerName	[12] UTF8String OPTIONAL
}

MsgStoreOperation ::= SEQUENCE
	-- Manipulation of a message store.
{
	dateTime		[1] GeneralizedTime OPTIONAL,
	subscriberID	[2] MsgSubscriberID OPTIONAL,
	msgStore		[3] MsgStoreID OPTIONAL,
	operation		[4] ENUMERATED
	{
		connect(0),
			-- Successful authorization for access to msgStore
		disconnect(1),
		retrieveMsg(2),
			-- Viewing msg using a webmail client is also considered retrieval
		partialretrieveMsg(3),
			-- E.g. the TOP command in POP3
		deleteMsg(4),
		addMsg(5),
			-- E.g. the APPEND command in IMAP
		...,
		editMsg(6)
	} OPTIONAL,
	senderAddress	[5] MsgAddress OPTIONAL,
		-- For Internet email, use the From address in the mail headers
	recipients		[6] SEQUENCE OF MsgAddress OPTIONAL,
		-- For Internet email, use the To, CC, and BCC addresses in the mail headers
	protocol		[7] ENUMERATED
	{
		pop(0),
		imap(1),
		...,
		webmail(2)
	} OPTIONAL,
	clientID		[8] IPAddress OPTIONAL,
	serverID		[9] IPAddress OPTIONAL,
	...,
	messageID		[10] MessageID OPTIONAL
}

MessageID ::= UTF8String
	-- Unique identifier for this message, e.g RFC 822 header

-- ==============================
-- Definitions of Billing Data
-- ==============================

MsgBillingDetails ::= SEQUENCE
{
	subscriberID				[1] MsgSubscriberID OPTIONAL,
	serviceID					[2] UTF8String OPTIONAL,
	billingAddress				[3] ContactDetails OPTIONAL,
	billingIdentifier			[4] MsgBillingIdentifier OPTIONAL,
	billingRecords				[5] SEQUENCE OF MsgBillingRecords OPTIONAL,
	nationalMsgBillingDetails	[6] NationalMsgBillingDetails OPTIONAL,
		-- To be defined on a national basis 
		-- Only to be used in case the present document cannot fulfil the national requirements
	...
}

NationalMsgBillingDetails ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

MsgBillingIdentifier ::= OCTET STRING
	-- Used to correlate billing information
	-- useful if the bill-payer is not the subscriber, e.g. company mobiles

MsgBillingRecords ::= SEQUENCE
{
	time						[1] GeneralizedTime OPTIONAL,
	place						[2] UTF8String OPTIONAL,
	amount						[3] REAL OPTIONAL,
	currency					[4] UTF8String (SIZE(3)) OPTIONAL,
		-- as per ISO 4217 [5]
	method						[5] UTF8String OPTIONAL,
		-- i.e. credit card etc.
	nationalMsgBillingRecords	[6] NationalMsgBillingRecords OPTIONAL,
		-- To be defined on a national basis 
		-- Only to be used in case the present document cannot fulfil the national requirements
	...,
	msgTransactionID			[7] UTF8String OPTIONAL,
		-- Unique reference for this transaction/billing record
		-- Details to be defined on a national basis
	mgsTransactionStatus		[8] UTF8String OPTIONAL
		-- Status of the transaction (i.e. “declined”, “succeeded” etc.)
		-- Details to be defined on a national bases
}

NationalMsgBillingRecords ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}
MultimediaRecord ::= CHOICE
{
	multimediaSubscriber		[1] MultimediaSubscriber,
	multimediaBillingDetails	[2] MultimediaBillingDetails,
	multimediaServiceUsage		[3] MultimediaServiceUsage,
	...
}

-- ==============================
-- Definitions of Subscriber Data
-- ==============================

MultimediaSubscriber ::= SEQUENCE
{
	subscriberID					[1] MultimediaSubscriberID OPTIONAL,
		-- unique identifier for this subscriber, e.g. account number
	genericSubscriberInfo			[2] GenericSubscriberInfo OPTIONAL,
		-- generic personal information about this subscriber
	multimediaSubscriberInfo		[3] MultimediaSubscriberInfo OPTIONAL,
		-- service-specific information about this subscriber
	subscribedMultimediaServices	[4] SEQUENCE OF SubscribedMultimediaServices OPTIONAL,
		-- a subscriber (or account) may have more than one service listed against them
	...
}

MultimediaSubscriberInfo ::= SEQUENCE
{
	nationalMultimediaSubscriberInfo	[1] NationalMultimediaSubscriberInfo OPTIONAL,
	...
}

MultimediaSubscriberID ::= UTF8String
	-- unique identifier for this subscriber, e.g. account number

SubscribedMultimediaServices ::= SEQUENCE
{
	serviceID					[1] UTF8String OPTIONAL,
		-- Unique identifier for this service within the operator
	providerID					[2] UTF8String OPTIONAL,
		-- Unique identifier for the service provider
	timeSpan					[3] TimeSpan OPTIONAL,
		-- Start and end data, if applicable, of the subscription
	registeredIdentifiers		[4] SEQUENCE OF PartyIdentity OPTIONAL,
		-- The set of identifiers registered for this service
	registeredICCID				[5] UTF8String OPTIONAL,
	serviceType					[6] MultimediaServiceType OPTIONAL,
	installationAddress			[7] AddressInformation OPTIONAL,
		-- installation address, if different from the registered address
	connectionDate				[8] GeneralizedTime OPTIONAL,
		-- Date the subscriber was actually connected 
		-- (May differ from the start of subscription)
	iMSI						[9] IMSI OPTIONAL,
	carrierPreselect			[10] BOOLEAN OPTIONAL,
	lineStatus					[11] UTF8String OPTIONAL,
		-- CSP-specific description of current line status,
		-- e.g. "Active", "Ceased", etc.
	nationalMultimediaServices	[12] NationalMultimediaServices OPTIONAL,
		-- national extension
	...,
	paymentDetails				[13] PaymentDetails OPTIONAL
}

MultimediaServiceType ::= ENUMERATED
{
	private(0),
	privatePABX(1),
	publicPayphone(2),
	geographicalfixed(3),
	geographicalindependent(4),
	...
}

-- =================================
-- Definitions of Service Usage Data
-- =================================

MultimediaServiceUsage ::= SEQUENCE
{
	partyInformation				[1] SEQUENCE OF MultimediaPartyInformation OPTIONAL,
		-- This parameter provides the concerned party (Originating, Terminating or 
		-- forwarded party), the identity(ies) of the party and all the information
		-- provided by the party
	communicationTime				[2] TimeSpan OPTIONAL,
		-- Time and duration of the communication
	reasonCause						[3] INTEGER OPTIONAL,
		-- cause code for call termination e.g. SIP Reason code
	communicationType				[4] MultimediaCommunicationType OPTIONAL,
	bearerService					[5] MultimediaBearerService OPTIONAL,
	qualityOfService				[6] QualityOfService OPTIONAL,
	ringDuration					[7] INTEGER OPTIONAL,
	callID							[8] MultimediaCallID OPTIONAL,
	originalCallID					[9] MultimediaCallID OPTIONAL,
	callState						[10] ENUMERATED
	{ 
		bNotReached(1),
		bAlert(2),
		bAnswered(3),
		...
	} OPTIONAL,
	answerTime						[11] GeneralizedTime OPTIONAL,
	contentType						[12] SEQUENCE OF UTF8String OPTIONAL,
	mediaComponents					[13] SEQUENCE OF MediaComponent OPTIONAL,
	imsInformation					[14] ImsInformation OPTIONAL,
	nationalMultimediaServiceUsage	[15] NationalMultimediaServiceUsage OPTIONAL,
	serviceID						[16] UTF8String OPTIONAL,
	providerID						[17] UTF8String OPTIONAL,
	...
}

MultimediaPartyInformation ::= SEQUENCE
{
	partyRole 							[1] MultimediaPartyRole OPTIONAL,
	partyIdentity						[2] PartyIdentity OPTIONAL,
	subscriberID						[3] MultimediaSubscriberID OPTIONAL,
	communicationTime					[4] TimeSpan OPTIONAL,
		-- Time and duration of the communication
	iMSI								[6] IMSI OPTIONAL,
	natureOfAddress						[7] UTF8String OPTIONAL,
		-- Nature of address indicator, e.g. "National", "International"
	uRI									[8] UTF8String OPTIONAL,
	partyNumber							[9] PartyNumber OPTIONAL,
	naAssignedAddress					[10] NAAssignedAddress OPTIONAL,
	forwardedTransferredIdentifier		[11] PartyIdentity OPTIONAL,
	terminatingTransferredIdentifier	[12] PartyIdentity OPTIONAL,
	nationalMultimediaPartyInformation	[13] NationalMultimediaPartyInformation OPTIONAL,
	...,
	userAgent							[14] UTF8String OPTIONAL,
		-- e.g. SIP User-Agent field (see RFC 3261 [26])
	octetsUploaded						[15] INTEGER OPTIONAL,
	octetsDownloaded					[16] INTEGER OPTIONAL
}

MultimediaCallID	::=	UTF8String

MultimediaCommunicationType	::=	ENUMERATED
{
	multimediaFixed(0),
	multimediaWireless(1),
	multimediaNetworkIndependent(2),
	...
}

MultimediaPartyRole	::=	ENUMERATED
{
	calling(0),
	called(1),
	calledAssertedIdentity(2),
	calledApplicationServer(3),
	originalCalled(4),
	redirecting(5),
	multimediaNetworkIndependent(6),
	directory(7),
	broadcastReceiver(8),
	broadcastSender(9),
	...
}

MultimediaBearerService	::=	ENUMERATED
{
	speech(0),
	data(1),
	fax(2),
	video(3),
	emergencyCall(4),
	...
}

ImsInformation	::=	SEQUENCE
{
	service				[1] ENUMERATED
	{
		session(1),
		message(2),
		refer(3),
		...
	} OPTIONAL,
	roleOfNode			[2] ENUMERATED
	{
		originating(1),
		terminating(2),
		proxy(3),
		b2bua(4),
		...
	} OPTIONAL,
	serviceInfo			[4] SEQUENCE OF ImsServiceInfo OPTIONAL,
	...
}

ImsServiceInfo ::= SEQUENCE
{
	serviceData 	[1] OCTET STRING OPTIONAL,
		-- service data
	serviceType 	[2] INTEGER OPTIONAL,
		-- service type
	    ...
}

MediaComponent ::= SEQUENCE
{
	time								[1] GeneralizedTime OPTIONAL,
	mediaName							[2] UTF8String OPTIONAL,
	mediaDescription					[3] UTF8String OPTIONAL,
	mediaInitiator						[4] PartyIdentity OPTIONAL,
	accessCorrelationID					[5] OCTET STRING OPTIONAL,
	nationalMultimediaMediaComponent	[6] NationalMultimediaMediaComponent OPTIONAL,
	...
}

-- ==============================
-- Definitions of Billing Data
-- ==============================

MultimediaBillingDetails ::= SEQUENCE
{
	subscriberID						[1] MultimediaSubscriberID OPTIONAL,
	serviceID							[2] UTF8String OPTIONAL,
	billingAddress						[3] ContactDetails OPTIONAL,
	billingIdentifier					[4] MultimediaBillingIdentifier OPTIONAL,
	billingRecords						[5] SEQUENCE OF MultimediaBillingRecords OPTIONAL,
	nationalMultimediaBillingDetails	[6] NationalMultimediaBillingDetails OPTIONAL,
		-- To be defined on a national basis 
		-- Only to be used in case the present document cannot fulfil the national requirements
	...
}

NationalMultimediaBillingDetails ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

MultimediaBillingIdentifier ::= OCTET STRING
	-- Used to correlate billing information
	-- useful if the bill-payer is not the subscriber, e.g. company mobiles

MultimediaBillingRecords ::= SEQUENCE
{
	time								[1] GeneralizedTime OPTIONAL,
	place								[2] UTF8String OPTIONAL,
	amount								[3] REAL OPTIONAL,
	currency							[4] UTF8String (SIZE(3)) OPTIONAL,
		-- as per ISO 4217 [5]
	method								[5] UTF8String OPTIONAL,
		-- i.e. credit card etc. 
	nationalMultimediaBillingRecords	[6] NationalMultimediaBillingRecords OPTIONAL,
		-- To be defined on a national basis 
		-- Only to be used in case the present document cannot fulfil the national requirements
	... ,
	multimediaTransactionID				[7] UTF8String OPTIONAL,
		-- Unique reference for this transaction/billing record
		-- Details to be defined on a national basis
	multimediaTransactionStatus			[8] UTF8String OPTIONAL
		-- Status of the transaction (i.e. “declined”, “succeeded” etc.)
		-- Details to be defined on a national bases
}

NationalMultimediaBillingRecords ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

-- ===================
-- General definitions
-- ===================

PartyIdentity ::= UTF8String
	-- E.164 address of the party in international format, or
	-- SIP URI or TEL URI representing E.164

QualityOfService ::= UTF8String
	-- Free text description of the invoked quality of service

NationalMultimediaSubscriberInfo ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

NationalMultimediaServices ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

NationalMultimediaServiceUsage ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

NationalMultimediaPartyInformation ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}

NationalMultimediaMediaComponent ::= SEQUENCE
{
	countryCode		[1] UTF8String (SIZE (2)),
		-- see comment in NationalRequestParameters
	...
}
NetworkAccessRecord::= CHOICE
{
	naSubscriber		[1] NASubscriber,
	naServiceUsage		[2] NAServiceUsage,
	naDevice			[3] NADevice,
	naNetworkElement	[4] NANwElement,
	naBillingDetails	[5] NABillingDetails,
	...
}

-- =============================================
-- Definitions of Network Access Subscriber Data
-- =============================================

NAProviderID ::= UTF8String

NAAuthID ::= UTF8String

NaSubscriberID ::= UTF8String

NASubscriber ::= SEQUENCE
	-- Generic information on a service subscriber, supplemented with information specific to
	-- network access services.
{
	validity			[1] TimeSpan OPTIONAL,
	subscriberID		[2] NaSubscriberID OPTIONAL,
		-- Unique identifier for this subscriber, e.g. account number
	naSubscriptions		[3] SEQUENCE OF NAServiceSubscription OPTIONAL,
		-- List of all known services subscribed to by this user
	allocatedDeviceIDs	[4] SEQUENCE OF NADeviceId OPTIONAL,
		-- List of all known devices allocated to this user. 
	subscriber			[5] GenericSubscriberInfo OPTIONAL ,
		-- Name, address and other generic subscriber information
	...
}

NAServiceSubscription ::= SEQUENCE
	-- Description of the subscription to a Network Access service
{
	validity				[1] TimeSpan OPTIONAL,
	naServiceID				[2] UTF8String OPTIONAL,
		-- Identifier for the service, e.g. account plan name. 
	naProviderID			[3] NAProviderID OPTIONAL,
		-- Unique identifier for the provider of the service, e.g. company name
	naAuthID				[4] NAAuthID OPTIONAL,
		-- Unique identifier for this subscription, e.g. logon name
	options					[5] UTF8String OPTIONAL,
		-- Human readable text with restrictions or options to the subscription
	installationAddress	[6] AddressInformation OPTIONAL,
	fixIpAddress			[7] IPAddress OPTIONAL,
		-- fix assigned IP address
	imsi					[8] IMSI OPTIONAL,
	...,
	allocatedDeviceIDs		[9] SEQUENCE OF NADeviceId OPTIONAL,
	naServiceStatus			[10] UTF8String OPTIONAL,
		-- CSP-specific description of current service status, e.g. "Active", "Ceased", etc.
	registeredICCID			[11] UTF8String OPTIONAL,
	nationalNASubscription	[12] NationalNASubscription OPTIONAL,
	paymentDetails			[13] PaymentDetails OPTIONAL,
	additionalIPAddresses	[14] SEQUENCE OF IPAddressSetOrRangeOrMask OPTIONAL
}

NationalNASubscription ::= SEQUENCE
	-- Description of the subscription to a Network Access service
{
	countryCode				[1] UTF8String (SIZE(2)),
		-- see comment in NationalRequestParameters
	...
}

-- ===========================================
-- Definitions of Network Access Service Usage
-- ===========================================

NAServiceUsage ::= SEQUENCE
{
	naAccessTime		[1] GeneralizedTime OPTIONAL,
		-- Time of connection to the NAS
	naAuthID			[2] NAAuthID OPTIONAL,
		-- Username used to obtain network access
	nwAccessType		[3] NwAccessType OPTIONAL,
		-- Type of network access attempted. If not undefined(0), this should be one of the types
		-- supported by the NAS (identified below by naNwElementID)
	naStatus			[4] ENUMERATED
	{
		unknown(0),
		succeeded(1),
			-- Authentication OK and access granted
		failed(2),
			-- Authentication failure (wrong credentials or time out)
		rejected(3),
			-- Rejected by the CSP (e.g. usage limits exceeded)
		...
	} OPTIONAL,
	interval			[5] TimeSpan OPTIONAL,
		-- Start time and end time (duration) of network access. 
	naDeviceId			[6] NADeviceId OPTIONAL,
		-- Device used to access the service
	naNwElementID		[7] NANwElementID OPTIONAL,
		-- Network element (NAS) onto which the naDevice is connected
	naAssignedAddress	[8] SEQUENCE OF NAAssignedAddress OPTIONAL,
		-- IP address assigned by the network access service. May be fixed or dynamic
	location			[9] Location OPTIONAL,
		-- Location of the access (for e.g. GPRS handsets)
	dialUpInformation	[10] DialUpInformation OPTIONAL,
	gprsInformation		[11] GprsInformation OPTIONAL,
	...,
	octetsDownloaded	[12] INTEGER OPTIONAL,
	octetsUploaded		[13] INTEGER OPTIONAL,
	endReason			[14] NAEndReason OPTIONAL,
	subscriberID		[15] NaSubscriberID OPTIONAL
		-- Identifier for a known user of this network access
}

NAEndReason ::= ENUMERATED
{
	unknownReason(0),
	timeout(1),
	userDisconnect(2),
		-- e.g. user logs off
	networkDisconnect(3),
		-- e.g. user's time/credits have been used up
	networkError(4),
	...
}

NwAccessType ::= ENUMERATED
{
	undefined(0),
	dialUp(1),
		-- DialUp access
	xDSL(2),
		-- DSL access
	cableModem(3),
		-- Cable access
	lAN(4),
		-- LAN access
	wirelessLAN(5),		
		-- Wireless LAN access (e.g. hotspot)
	wimax(6),
	mobilePacketData(7),	-- Network access over GSM/3GPP GPRS, UMTS, etc.
	...
}

DialUpInformation ::= SEQUENCE
{
	diallingNumber		[1] PartyNumber OPTIONAL,		
		-- Telephone number used for dial-up access
	dialledNumber		[2] PartyNumber OPTIONAL,
	callback			[3] PartyNumber OPTIONAL,		
		-- Call back number used for dial-up access
	...
}

GprsInformation ::= SEQUENCE
{
	iMSI					[1] IMSI OPTIONAL,
	mSISDN					[2] PartyNumber OPTIONAL,
	sgsnAddress				[3] SEQUENCE OF IPAddress OPTIONAL, 
	ggsnAddress				[4] IPAddress OPTIONAL, 
	pDP-address-allocated	[5] IPAddress OPTIONAL,
	aPN						[6] UTF8String OPTIONAL,
	pDP-type				[7] OCTET STRING (SIZE(2)) OPTIONAL,
	-- format as per TS 101 671 [6]
	...,
	gPRSEvent				[8] GPRSEvent OPTIONAL
		-- format as per 3GPP TS 33.108 [11]
	-- Tag [9] was used in the past and shall not be reused.
}

GPRSEvent ::= ENUMERATED 
{
	pDPContextActivation(1),
	pDPContextDeactivation(4),
	gPRSAttach(5),
	gPRSDetach(6),
	locationInfoUpdate(10),		
		-- sMS ommited from 3GPP TS 33.108 [11],
	pDPContextModification(11),
	servingSystem(12),
	...
}

-- ====================================
-- Definitions of Network Access Device
-- ====================================

NADeviceId ::= UTF8String