The function obj_cmp() (file crypto/objects/obj_dat.c) can in some
situations call memcmp() with a null pointer and a zero length.

This is invalid behaviour. When compiling openssl with undefined
behaviour sanitizer (add -fsanitize=undefined to compile flags) this
can be seen. One example that triggers this behaviour is the pkcs7
command (but there are others, e.g. I've seen it with the timestamp
function):
apps/openssl pkcs7 -in test/testp7.pem

What happens is that obj_cmp takes objects of the type ASN1_OBJECT and
passes their ->data pointer to memcmp. Zero-sized ASN1_OBJECT
structures can have a null pointer as data.

RT#3816

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2b8dc08b)

Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.

Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.

RT#2958

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a0bd6493)

Matt's note: I added a call to X509V3err to Kurt's original patch.

RT#3840

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 344c271e)

clang says: "s_cb.c:958:9: error: implicitly declaring library function
'memcpy'"

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8f744cce)

Conflicts:
	apps/s_cb.c

If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.

Based on an original patch by mrpre <mrpre@163.com>.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 14def5f5)

Reviewed-by: Rich Salz <rsalz@akamai.com>

Ensure all fatal errors transition into the new error state for DTLS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cefc9391)

Conflicts:
	ssl/d1_srvr.c

Ensure all fatal errors transition into the new error state on the client
side.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cc273a93)

Conflicts:
	ssl/s3_clnt.c

Ensure all fatal errors transition into the new error state on the server
side.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cf9b0b6f)

Conflicts:
	ssl/s3_srvr.c

Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a89db885)

Conflicts:
	ssl/s3_srvr.c
	ssl/ssl_stat.c

Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d13bd613)

Conflicts:
	crypto/x509v3/v3_scts.c

RT2943 only complains about the incorrect check of -K argument size,
we might as well do the same thing with the -iv argument.

Before this, we only checked that the given argument wouldn't give a
bitstring larger than EVP_MAX_KEY_LENGTH.  we can be more precise and
check against the size of the actual cipher used.

(cherry picked from commit 8920a7cd

)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Was memset with wrong sizeof.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 23b0fa5a)

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit bed2edf1)

Use sizeof *foo parameter, to avoid these errors.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 53ba0a9e)

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 539ed89f)

The problem occurs in EVP_PKEY_sign() when using RSA with X931 padding.
It is only triggered if the RSA key size is smaller than the digest length.
So with SHA512 you can trigger the overflow with anything less than an RSA
512 bit key. I managed to trigger a 62 byte overflow when using a 16 bit RSA
key. This wasn't sufficient to cause a crash, although your mileage may
vary.

In practice RSA keys of this length are never used and X931 padding is very
rare. Even if someone did use an excessively short RSA key, the chances of
them combining that with a longer digest and X931 padding is very
small. For these reasons I do not believe there is a security implication to
this. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 34166d41)

Add a sanity check to the print_bin function to ensure that the |off|
argument is positive. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 3deeeeb6)

Sanity check the |len| parameter to ensure it is positive. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cb0f400b)

The return value is checked for 0. This is currently safe but we should
really check for <= 0 since -1 is frequently used for error conditions.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c427570e)

Conflicts:
	ssl/ssl_locl.h

For SSLv3 the code assumes that |header_length| > |md_block_size|. Whilst
this is true for all SSLv3 ciphersuites, this fact is far from obvious by
looking at the code. If this were not the case then an integer overflow
would occur, leading to a subsequent buffer overflow. Therefore I have
added an explicit sanity check to ensure header_length is always valid.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 29b0a15a)

The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 9d9e3774)

There was already a sanity check to ensure the passed buffer length is not
zero. Extend this to ensure that it also not negative. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit b86d7dca)

The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c8269881)

Conflicts:
	ssl/record/ssl3_record.c

Add a sanity check to DES_enc_write to ensure the buffer length provided
is not negative. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 873fb39f)

Fortify flagged up a problem in n_do_ssl_write() in SSLv2. Analysing the
code I do not believe there is a real problem here. However the logic flows
are complicated enough that a sanity check of |len| is probably worthwhile.

Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This reverts commit 47daa155

.

The above commit was backported to the 1.0.2 branch as part of backporting
the alternative chain verify algorithm changes. However it has been pointed
out (credit to Shigeki Ohtsu) that this is unnecessary in 1.0.2 as this
commit is a work around for loop checking that only exists in master.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6038354c)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a4d5269e)

Cosmetic, no real effect.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4446044a)

Thanks to Brian Smith for reporting these issues.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Thanks to Brian Smith for reporting these issues.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 53dd4ddf)

Also add a few comments about constant-timeness.

Thanks to Brian Smith for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The function CRYPTO_strdup (aka OPENSSL_strdup) fails to check the return
value from CRYPTO_malloc to see if it is NULL before attempting to use it.
This patch adds a NULL check.

RT3786

Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 37b0cf936744d9edb99b5dd82cae78a7eac6ad60)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 20d21389c8b6f5b754573ffb6a4dc4f3986f2ca4)

EAP-FAST session resumption relies on handshake message lookahead
to determine server intentions. Commits
980bc1ec
and
7b3ba508


removed the lookahead so broke session resumption.

This change partially reverts the commits and brings the lookahead back
in reduced capacity for TLS + EAP-FAST only. Since EAP-FAST does not
support regular session tickets, the lookahead now only checks for a
Finished message.

Regular handshakes are unaffected by this change.

Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6e3d0153)

newsig may be used (freed) uninitialized on a malloc error.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 68249414)

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

The logic with how 'ok' was calculated didn't quite convey what's "ok",
so the logic is slightly redone to make it less confusing.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 06affe3d)

Filled in lots of return value checks that were missing the GOST engine, and
added appropriate error handling.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8817e2e0)

Fix miscellaneous NULL pointer derefs in the sureware engine.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7b611e5f)