Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8bc8450a)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit bf68456f)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 53332a75)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cd387d21)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 0c403e80)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 553affbe)

From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d)

master branch has a specific regression test for a bug in x86_64-mont5 code,
see commit cdfe0fdd

.

This code is now in 1.0.2/1.0.1, so also backport the test.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit bb565cd2)

Invalid zero-padding in the divisor could cause a division by 0.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit a43bcd9e)

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 55e53026)

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 1904d211)

Reviewed-by: Tim Hudson <tjh@openssl.org>

Based on commit 66f96fe2

 by Steve Henson

Reviewed-by: Tim Hudson <tjh@openssl.org>

The temporary variable causes unused variable warnings in opt mode with clang,
because the subsequent assert is compiled out.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6af16ec5)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit d04a1e0b)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit bb1ddd3d)

malloc failure.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 41bf2501)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 76e65090)

The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.

Thanks to Felix Groebert of the Google Security Team for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba86)

Reviewed-by: Tim Hudson <tjh@openssl.org>

Conflicts:
	ssl/d1_lib.c

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4bb8eb9c)

than the mtu we are already using

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 047f2159)

and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 464ce920)

we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef3)

at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e4)

and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6a)

Conflicts:
	ssl/d1_both.c
	ssl/ssl_lib.c

used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0d3ae34d)

Conflicts:
	crypto/bio/bss_dgram.c

mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f)

automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 00123577)

RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017b)

If SSLv2 and SSLv3 are both disabled we still support SSL/TLS.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").

This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.

Reported by Yichun Zhang (agentzh).

Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8123d158)

The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 03b637a7)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

PR#1767

Reviewed-by: Richard Levitte <levitte@openssl.org>