Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix the docs, and refactor some common code.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
        (Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven.  Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure.  The same protocol version constraints
are now applied in all code paths.  It is now much easier to add
new protocol versions without reworking the protocol selection
logic.

In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...).  Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Ben Laurie <ben@openssl.org>

s_server was trying to set the ECDH curve when no-ec was defined. This also
highlighted the fact that the -no_ecdhe option to s_server is broken, and
doesn't make any sense any more (ECDHE is on by default and the only way it
can be disabled is through the cipherstring). Therefore this commit removes
the option.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

(Documentation update was in the MR but not the commit.  Oops.)
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The link to the OCB patent pdf changed, so the link in CHANGES needs to be
updated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Misc updates to the CHANGES and NEWS files ready for the alpha release.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Todo: update documentation.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

MR: #364

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it.  On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.

Reviewed-by: Matt Caswell <matt@openssl.org>

Add some clarifications to the async documentation. Also changed
ASYNC_pause_job() so that it returns success if you are not within the
context of a job. This is so that engines can be used either asynchronously
or synchronously and can treat an error from ASYNC_pause_job() as a real
error.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a CHANGES entry for the new async code.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Final part of flushing out SSLEay API's.

Reviewed-by: Tim Hudson <tjh@openssl.org>

All instances of SSLeay (any combination of case) were replaced with
the case-equivalent OpenSSL.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove all the defines for the old state machines states. Mapping old to new
is probably going to cause more problems than it solves so it is probably
better to just remove them.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename the enum HANDSHAKE_STATE to OSSL_HANDSHAKE_STATE to ensure there are
no namespace clashes, and convert it into a typedef.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Update the CHANGES file for the state machine rewrite

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

There are a number of engines in the OpenSSL source code which are now
obsolete. The following engines have been removed: 4758cca, aep, atalla,
cswift, nuron, sureware.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Thanks to the OpenBSD community for bringing this to our attention.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This patch updates the "DEFAULT" cipherstring to be
"ALL:!COMPLEMENTOFDEFAULT:!eNULL". COMPLEMENTOFDEFAULT is now defined
internally by a flag on each ciphersuite indicating whether it should be
excluded from DEFAULT or not. This gives us control at an individual
ciphersuite level as to exactly what is in DEFAULT and what is not.

Finally all DES, RC4 and RC2 ciphersuites are added to COMPLEMENTOFDEFAULT
and hence removed from DEFAULT.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>

   +Replace FILE BIO's with dummy ops that fail.
   +Include <stdio.h> for sscanf() even with no-stdio (since the declaration
    is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
    variable, since it can be larger than a 'long'. And we don't rely on the
    availability of strtoull().
   +Remove OPENSSL_stderr(); not used.
   +Make OPENSSL_showfatal() do nothing (currently without stdio there's
    nothing we can do).
   +Remove file-based functionality from ssl/. The function
    prototypes were already gone, but not the functions themselves.
   +Remove unviable conf functionality via SYS_UEFI
   +Add fallback definition of BUFSIZ.
   +Remove functions taking FILE * from header files.
   +Add missing DECLARE_PEM_write_fp_const
   +Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
    so remove its prototype.
   +Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
   +Eliminate SRP_VBASE_init() and supporting functions. Users will need to
    build the verifier manually instead.
   +Eliminate compiler warning for unused do_pk8pkey_fp().
   +Disable TEST_ENG_OPENSSL_PKEY.
   +Disable GOST engine as is uses [f]printf all over the place.
   +Eliminate compiler warning for unused send_fp_chars().

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Rewrite EVP_DecodeUpdate.

In particular: reject extra trailing padding, and padding in the middle
of the content. Don't limit line length. Add tests.

Previously, the behaviour was ill-defined, and depended on the position
of the padding within the input.

In addition, this appears to fix a possible two-byte oob read.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

If the seed value for dsa key generation is too short (< qsize),
return an error. Also update the documentation.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Thanks folks:
        348 Benjamin Kaduk
        317 Christian Brueffer
        254 Erik Tews
        253 Erik Tews
        219 Carl Mehner
        155 (ghost)
        95 mancha
        51 DominikNeubauer

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>