- Jan 20, 2018
-
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5121)
-
Richard Levitte authored
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5094)
-
- Jan 19, 2018
-
-
Benjamin Kaduk authored
Note the reasons, including streaming output issues and key/iv/nonce management issues. Recommend the use of cms(1) instead. Fixes #471. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/5048)
-
Richard Levitte authored
Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/5110)
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5108)
-
Richard Levitte authored
On Windows, we sometimes see a behavior with SO_REUSEADDR where there remains lingering listening sockets on the same address and port as a newly created one. To avoid this scenario, we don't create a new proxy port for each new client run. Instead, we create one proxy socket when the proxy object is created, and close it when destroying that object. Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5095)
-
- Jan 18, 2018
-
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5060)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5060)
-
Richard Levitte authored
Because OPENSSL_SYS_CYGWIN will keep OPENSSL_SYS_UNIX defined, there's no point having checks of this form: #if (defined(OPENSSL_SYS_UNIX) || defined(OPENSSL_SYS_CYGWIN)) Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5060)
-
Richard Levitte authored
More to the point, Cygwin is a POSIX API. In our library, the use of a POSIX API is marked by defining the macro OPENSSL_SYS_UNIX. Therefore, that macro shouldn't be undefined when building for Cygwin. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5060)
-
Richard Levitte authored
On Windows, we sometimes see a behavior with SO_REUSEADDR where there remains lingering listening sockets on the same address and port as a newly created one. An easy solution is not to use ReuseAddr on Windows. Thanks Bernd Edlinger for the suggestion. Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5103)
-
Jakub Jelen authored
CLA: trivial Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4861)
-
- Jan 17, 2018
-
-
Richard Levitte authored
On Windows, it seems that doing so in a forked (pseudo-)process sometimes affects the parent, and thereby hides all the results that are supposed to be seen by the running test framework (the "ok" and "not ok" lines). It turns out that our redirection isn't necessary, as the test framework seems to swallow it all in non-verbose mode anyway. It's possible that we did need this at some point, but the framework has undergone some refinement since then... Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5100)
-
Richard Levitte authored
We use the first we can of the following IO::Socket modules to create sockets: - IO::Socket::INET6 - IO::Socket::IP - IO::Socket::INET The last of them doesn't support IPv6, so if that's the one available, we must force the s_client and s_server processes to use IPv4. Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5092)
-
- Jan 16, 2018
-
-
Paul Yang authored
Because the related PR/commits are merged in 2018... Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4976)
-
Paul Yang authored
To avoid check failure, make dummy RETURN VALUES sections in the docs which have no real functions decribed inside... Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4976)
-
Paul Yang authored
All missing sections are added. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4976)
-
Matt Caswell authored
I received this error from a TLSProxy test: Failed to start up server (localhost,4443): Transport endpoint is not connected So, extend the timeout before we give up trying to connect to the server. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5088)
-
Matt Caswell authored
Commit 9f944291 changed the semantics of BN_copy() to additionally copy the BN_FLG_CONSTTIME flag if it is set. This turns out to be ill advised as it has unintended consequences. For example calling BN_mod_inverse_no_branch() can sometimes return a result with the flag set and sometimes not as a result. This can lead to later failures if we go down code branches that do not support constant time, but check for the presence of the flag. The original commit was made due to an issue in BN_MOD_CTX_set(). The original PR fixed the problem in that function, but it was changed in review to fix it in BN_copy() instead. The solution seems to be to revert the BN_copy() change and go back to the originally proposed way. Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/5080)
-
Dr. Matthias St. Pierre authored
Fixes #5076 Since do_rand_drbg_init() allocates three locks, it needs to ensure that OPENSSL_init_crypto() is called, otherwise these resources are not cleaned up properly. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/5083)
-
- Jan 15, 2018
-
-
Richard Levitte authored
The same kind of failure that has already been observed on the s_client can sometimes also be observed on s_server, so we need to add the same kind of 50ms delay as was previously added on s_client. Ref: git commit cb2e10f2 : Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5079)
-
Richard Levitte authored
Only when building the main shared libraries Fixes #5075 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5077)
-
- Jan 14, 2018
-
-
Richard Levitte authored
This was identified for Windows almost two years ago for VC and msys/mingw. It seems that Cygwin suffers from the same issue, and since Cygwin doesn't define OPENSSL_SYS_WINDOWS, we need to make a special case to have a 50ms pause before closing the TLS connection. Ref: git commit cb2e10f2 Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5074)
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5072)
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5072)
-
- Jan 13, 2018
-
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5071)
-
- Jan 12, 2018
-
-
Pauli authored
This to avoid a clash with a #defined symbol on Solaris from time.h. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5064)
-
- Jan 10, 2018
-
-
Patrick Schlangen authored
The data argument of SSL_dane_tlsa_add is used read-only, so it should be const. Reviewed-by: Viktor Dukhovni <viktor@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5056)
-
Dr. Matthias St. Pierre authored
- Avoid creating repeated year ranges <current_year>-<current_year> for documents which were added in the current year. - Use extended regular expressions for better readability (less quoting) - Use a shebang line which is more portable Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5044)
-
- Jan 09, 2018
-
-
Matt Caswell authored
In the case of a protocol version alert being sent by a peer the record version number may not be what we are expecting. In DTLS records with an unexpected version number are silently discarded. This probably isn't appropriate for alerts, so we tolerate a mismatch in the minor version number. This resolves an issue reported on openssl-users where an OpenSSL server chose DTLS1.0 but the client was DTLS1.2 only and sent a protocol_version alert with a 1.2 record number. This was silently ignored by the server. Reviewed-by: Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5018)
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5047)
-
Todd Short authored
Found with gcc 4.8.4 Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5045)
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5038)
-
David von Oheimb authored
Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4994)
-
- Jan 08, 2018
-
-
Christian Heimes authored
Closes: https://github.com/openssl/openssl/issues/4897 Signed-off-by: Christian Heimes <christian@python.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4898)
-
Tomas Mraz authored
This avoids situations where third party client is unable to recognize that the client certificate was issued by the same CA with name differring only by case or insignificant characters. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4731)
-
Patrick Steuer authored
In man1/engine.pod and man3/ENGINE_add.pod Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4956)
-
Patrick Steuer authored
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4958)
-
Jacob Hoffman-Andrews authored
Many of the sub-commands under apps/ accept cipher or digest arguments like "-sha256". These are implemented using a catchall flag that runs the result through opt_md() or opt_cipher(). That means any unrecognized flag, including typos, gets sent to those two functions, producing confusing error messages like below: $ ./apps/openssl req -x590 req: Unrecognized digest x590 req: Use -help for summary. This change switches these two functions to say "Unrecognized flag X" instead. The new message deliberately leaves off the "-" from the flag name, because there are some cases where opt_md() and opt_cipher() are passed a flag value instead (for instance, openssl ca -md). I think the new message is generic enough that it can serve both cases with improved clarity. CLA: trivial Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4972)
-
EasySec authored
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5000)
-