- Reject fractional seconds
- Reject offsets
- Check that the date/time digits are in valid range.
- Add documentation for X509_cmp_time

GH issue 2620

Backported from 80770da3



Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6182)

When the input length is zero, just return zero early.  Otherwise,
there's a small chance that memory allocation is engaged, fails and
returns -1, which is a bit confusing when nothing should be written.

Fixes #4782 #4827

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6175)

(cherry picked from commit 0d94212a)

Montgomery multiplication post-conditions in some of code paths were
formally non-constant time. Cache access pattern was result-neutral,
but a little bit asymmetric, which might have produced a signal [if
processor reordered load and stores at run-time].

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6163)

(cherry picked from commit 774ff8fe)

Resolved conflicts in ppc-mont.pl and x86_64-mont.pl.

(cherry picked from commit d067ba3b)

Fixes #6121

Thanks to Mingtao Yang for reporting this bug.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6164)

Earlier Apple Xcode compilers, e.g. one targeting Mac OS X 10.7, don't
support dependency generation and one still has to use makedepend.  It's
unclear when it was fixed, but all clang-based Apple compilers seem to
support -M options.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6073)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6115)

The ciphers field in a session contains the stack of ciphers offered by
the client.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6115)

The function SSL_get_shared_ciphers() is supposed to return ciphers shared
by the client and the server. However it only ever returned the client
ciphers.

Fixes #5317

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6115)

which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*().

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6118)

Specifically this is not supported with an even modulus and
BN_FLG_CONSTTIME.

Fixes #5082

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6138)

(cherry picked from commit 966b3df1)

Fixes #5063

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6136)

Make it clear that you should not attempt to get the version before the
first handshake is complete.

Fixes #2893

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6015)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6108)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6102)

This patch fixes the following two warnings when OpenSSL is built with no-dh option:

s_server.c: In function 's_server_main':
s_server.c:1105:25: warning: variable 'no_dhe' set but not used [-Wunused-but-set-variable]
     int no_tmp_rsa = 0, no_dhe = 0, no_ecdhe = 0, nocert = 0;
                         ^
s_server.c:1101:11: warning: variable 'dhfile' set but not used [-Wunused-but-set-variable]
     char *dhfile = NULL;
           ^
CLA: trivial
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6087)

This patch fixes the following warning when OpenSSL is configured with
no-dh and no-ec:

./Configure no-ec no-dh linux-x86_64

...
s3_lib.c: In function 'ssl3_get_req_cert_type':
s3_lib.c:4234:19: warning: variable 'alg_k' set but not used [-Wunused-but-set-variable]
     unsigned long alg_k;

CLA: trivial
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6087)

This patch fixes the following warning when OpenSSL is configured with
no-dh and no-ec:

./Configure no-ec no-dh linux-x86_64

...
s3_lib.c:4231:9: warning: variable 'nostrict' set but not used [-Wunused-but-set-variable]
     int nostrict = 1;
         ^

CLA: trivial
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6087)

Note that calling the *use_certificate* functions will replace any existing
certificate of the same type. The same thing applies for private keys.

Fixes #2147

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6093)

(cherry picked from commit db747425)

Add a bit more commentary to explain what's going on.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6080)

(cherry picked from commit d6d94d33)

That error is already caught by EVP_read_pw_string_min, and causes
this function to return -1, so the code detecting too short passwords
in this function is practically dead.

Fixes #5465

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6080)

(cherry picked from commit 4977b4e9)

This option shows the certificates as sent by the server. It is not the
full verified chain.

Fixes #4933

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6069)

Document the fact that if a session is not closed down cleanly then the
session gets removed from the cache and marked as non-resumable.

Fixes #4720

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6054)

(cherry picked from commit 0abb903b)

We were sending illegal parameter. This isn't correct. The parameters are
legal, we just don't have an overlap. A more appropriate alert is
handshake failure.

Fixes #2919

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6011)

do_accept() checked that the peer IP address had a PTR record, and would
fail if not.  The retrieved named was then never used, even though passed
around.  All this is unnecessary, so we remove it.

Fixes #3407

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6018)

The X509_STORE_CTX_init() docs explicitly allow a NULL parameter for the
X509_STORE. Therefore we shouldn't crash if we subsequently call
X509_verify_cert() and no X509_STORE has been set.

Fixes #2462

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6003)

If we have a non-matching kdf_type then pkey_dh_derive silently succeeds.
It should fail. This is a "should not happen" condition anyway so the
impact is negligible.

Fixes #2440

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6000)

If we run the ocsp command line app and the responder returns a
non-successful status code then the app should exit with a failure code.

Based on an original patch by Tatsuhiro Tsujikawa.

Fixes #2387

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5999)

(cherry picked from commit 2add645d)

The behaviour of X509_cmp_time used to be undocumented.

The new behaviour, documented in master, is to return only 0, 1, or -1.
Make the code in the other branches to adhere to this behaviour too,
to reduce confusion. There is nothing to be gained from returning
other values.

Fixes GH#4954

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4955)

(cherry picked from commit 48345917)

The wrong flags were being tested. It is the rsa->meth flags not the rsa
flags that should be tested.

wpa_supplicant has a bit of code that
1. Allocates and defines a RSA_METHOD structure.
2. calls RSA_new();
3. calls RSA_set_method().

In current versions of that code the rsa_sign and rsa_verify members of
the RSA_METHOD structure are not defined, thus making it compatible
with the really old versions of OpenSSL.

But should one change it use the rsa_sign method one must set the
RSA_FLAG_SIGN_VER bit of the RSA_METHOD structure to indicate that
one or both of those new methods are required.  In doing so, OpenSSL
will not call the new methods, not without this change.

CLA: trivial

Change-Id: I6e65a80f21399f25e966466ff676e3b21f85f360

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5971)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5988)

We cannot provide a certificate status on a resumption so we should
ignore this extension in that case.

Fixes #1662

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5898)

RSA key generation: ensure BN_mod_inverse and BN_mod_exp_mont both get called with BN_FLG_CONSTTIME flag set.

CVE-2018-0737

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6939eab0)

This is a minor update which hopefully makes these particular lines
read a little easier.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5938)

(cherry picked from commit 0652e8a7)
(cherry picked from commit 9e8554fc)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5889)

(cherry picked from commit 2876872f)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5884)

There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.

These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.

dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:

            if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
                goto err;
            if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
                goto err;
            for (i = 0; i < qsize; i++)
                md[i] ^= buf2[i];

            /* step 3 */
            md[0] |= 0x80;
            md[qsize - 1] |= 0x01;
      ...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5884)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5826)

(cherry picked from commit 1518c55a)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5826)

(cherry picked from commit 16e1eea6)

Thanks to Sem Voigtländer for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5826)

(cherry picked from commit 752837e0)