While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.

*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.

Thanks to Julien Kauffmann for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit f617b496)

Conflicts:
	crypto/asn1/tasn_new.c

PR#3789

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 7a317fa0)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 9fdbc9df)

Since source reformat, we ended up with some error reason string
definitions that spanned two lines.  That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "Peer haven't sent GOST certificate, required for selected ciphersuite"},

However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "No gost certificate sent by peer"},

Clearly not what we wanted.  This change fixes this problem.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 2cfdfe09)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 37d92b1b)

The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this

e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
      [-Wshadow]
    seqnum = BSWAP8(blocks[0].q[0]);
             ^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
                            ^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
    size_t ret = 0;
           ^

Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2da2a434)

We use GNU statement expressions in crypto/md32_common.h, surrounded
by checks that GNU C is indeed used to compile.  It seems that clang,
at least on Linux, pretends to be GNU C, therefore finds the statement
expressions and then warns about them.

The solution is to have clang be quiet about it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 04958e84)

ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
      declaration [-Wempty-translation-unit]
      ^
1 warning generated.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c25dea53)

There is no indication that the timing differences are exploitable in
OpenSSL, and indeed there is some indication (Usenix '14) that they
are too small to be exploitable. Nevertheless, be careful and apply
the same countermeasures as in s3_srvr.c

Thanks to Nimrod Aviram, Sebastian Schinzel and Yuval Shavitt for
reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7eeeb49e)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit be5a87a1)

ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.

[Update even SHA results for latest Cortex-A53.]

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 94376ccc)

RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 30cd4ff2)

Conflicts:
	crypto/ec/ec_asn1.c

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit b06a6f7cc44baa0c17207a8f72c4ac360be7b555)

if CAfile or CApath were also supplied and successfully loaded first.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

create an HMAC

Inspired by BoringSSL commit 2fe7f2d0d9a6fcc75b4e594eeec306cc55acd594

Reviewed-by: Richard Levitte <levitte@openssl.org>

Conflicts:
	crypto/hmac/hmac.c

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure all calls to RAND_bytes and RAND_pseudo_bytes have their return
value checked correctly

Reviewed-by: Richard Levitte <levitte@openssl.org>

In ssl3_send_new_session_ticket the message to be sent is constructed. We
skip adding the length of the session ticket initially, then call
ssl_set_handshake_header, and finally go back and add in the length of the
ticket. Unfortunately, in DTLS, ssl_set_handshake_header also has the side
effect of buffering the message for subsequent retransmission if required.
By adding the ticket length after the call to ssl_set_handshake_header the
message that is buffered is incomplete, causing an invalid message to be
sent on retransmission.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4f9fab6b)

Conflicts:
	ssl/s3_srvr.c

In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit d5d0a1cb)

The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 93f1c136)

OCSP verification changes mean the OCSP tests now need -trusted_first

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b68c30d)

If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.

PR#3668

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4ca5efc2)

Fix compilation failure when SCTP is compiled due to incorrect define.

Reported-by: Conrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de>
URL: https://bugs.gentoo.org/543828



RT#3758
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

(cherry picked from commit 7c82e339)

Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit b79d2410)

In cooperation with Ard Biesheuvel (Linaro) and Sami Tolvanen (Google).

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2ecd32a1)

Fix builds config'd with no-ec and no-ec2m. Technically this combination is
redundant - but the fix is straight forward. Fix from OpenWrt.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Updated test/testssl script to include the new DTLS capability in ssltest.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3c381e54)

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 98b8cdd3)

Conflicts:
	ssl/ssltest.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 504e643e)

Conflicts:
	ssl/ssl_lib.c

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix some unsigned/signed warnings introduced as part of the fix
for CVE-2015-0293

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reported by the LibreSSL project as a follow on to CVE-2015-0209

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update the NEWS file with the latest entries from CHANGES ready for the
release.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update CHANGES file with all the latest fixes ready for the release.

Reviewed-by: Richard Levitte <levitte@openssl.org>