This is generalised by having the following macros for stuff that won't
be installed:

    NO_INST_LIB_CFLAGS, used instead of LIB_CFLAGS
    NO_INST_DSO_CFLAGS, used instead of DSO_CFLAGS
    NO_INST_BIN_CFLAGS, used instead of BIN_CFLAGS

They take values from corresponding target config fields if those are
defined, otherwise they take the respective values from LIB_CFLAGS,
DSO_CFLAGS and BIN_CFLAGS.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Send a bit information to the build file template functions.  For
src2obj(), the additional option 'product' holds the name of the final
file that the object file will go into.  Additionally, the diverse
functions will get the option 'installed', with a value that evaluates
true if the final product is to be installed, otherwise false.

Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS sets that errno when the device part of a file spec is malformed
or a logical name that doesn't exist.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Certain functions are automatically called during auto-deinit in order
to deallocate resources. However, if we have never entered a function which
marks lib crypto as inited then they never get called. This can happen if
the user only ever makes use of a small sub-set of functions that don't hit
the auto-init code.

This commit ensures all such resources deallocated by these functions also
init libcrypto when they are initially allocated.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>

Using the -trace option to s_server or s_client was incorrectly printing
UNKNOWN for the X25519 curve.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Improve interchangeability of aix*-gcc targets by linking shared
libraries with -static-libgcc, and address linking problems with
vendor compiler.

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT#4667

Reviewed-by: Rich Salz <rsalz@openssl.org>

Found by turning -Wswitch-enum on.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath.  Unfortunately, this doesn't work
too well with asan, msan or ubsan.

So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.

This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some hardware devices don't provide the public EC_POINT data. The only
way for X509_check_private_key() to validate that the key matches a
given certificate is to actually perform a sign operation and then
verify it using the public key in the certificate.

Maybe that can come later, as discussed in issue 1532. But for now let's
at least make it fail gracefully and not crash.

GH: 1532

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1547)
(cherry picked from commit 92ed7fa5)

The way we figured out what options are crypto algorithms and what are
something other was somewhat sketchy.  This change bases the
distinction on available sdirs instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Never output -0; make "negative zero" an impossibility.
Do better checking on BN_rand top/bottom requirements and #bits.
Update doc.
Ignoring trailing garbage in BN_asc2bn.

Port this commit from boringSSL: https://boringssl.googlesource.com/boringssl/+/899b9b19a4cd3fe526aaf5047ab9234cdca19f7d%5E!/


        Ensure |BN_div| never gives negative zero in the no_branch code.

        Have |bn_correct_top| fix |bn->neg| if the input is zero so that we
        don't have negative zeros lying around.

        Thanks to Brian Smith for noticing.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

In the case of using an independent makedepend, we had split that into
two separate recipes, one depending on the other.  However, there are
cases where the makedepend recipe was always trying, but doesn't
update the time stamp of the .d file because there are no actual
changes, and thereby causing constant updates of the object files.

This change makes one recipe that takes care of both makedepend och
cc, thereby avoiding these extra updates.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differences
in source code with standard pre-processor and switching to trap-free
version of addition and subtraction instructions.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Since vendor assembler can't assemble our modules with -KPIC flag,
it, assembly support, was not available as an option. But this
means lack of side-channel resistant code, which is incompatible
with security by todays standards.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This adheres much better to the documentation in test/README

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

This reverts commit 7f9ae888

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

This reverts commit eb40eaed

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

So far, the test runner (test/run_tests.pl) could get a list of tests
to run, and if non were given, it assumes all available tests should
be performed.

However, that makes skipping just one or two tests a bit of a pain.
This change makes the possibilities more versatile, run_checker.pl
takes these arguments and will process them in the given order,
starting with an empty set of tests to perform:

    alltests            The current set becomes the whole set of
                        available tests.
    test_xxx            Adds 'test_xxx' to the current set.
    -test_xxx           Removes 'test_xxx' from the current set.  If
                        nothing has been added to the set before this
                        argument, the current set is first initialised
                        to the whole set of available tests, then
                        'test_xxx' is removed from the current set.
    list                Display all available tests, then stop.

If no arguments are given, 'alltests' is assumed.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because some targets execute perl code that might die, we risk
incomplete lists.  Make it so dying doesn't happen when we're listing
targets.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

These tests take a very long time on some platforms, and arent't
always strictly necessary.  This makes it possible to turn them
off.  The necessary binaries are still built, though, in case
someone still wants to do a manual run.

Reviewed-by: Andy Polyakov <appro@openssl.org>

crypto/bn/*: x86[_64] division instruction doesn't handle constants, change constraint from 'g' to 'r'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.

RT#4665

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove NULL check on parameter, and use NULL not ! on buffer.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The previous commit revealed a long standing problem where CertStatus
processing was broken in DTLS. This would have been revealed by better
testing - so add some!

Reviewed-by: Rich Salz <rsalz@openssl.org>

The function tls_construct_cert_status() is called by both TLS and DTLS
code. However it only ever constructed a TLS message header for the message
which obviously failed in DTLS.

Reviewed-by: Rich Salz <rsalz@openssl.org>