Loading crypto/aes/asm/aesni-sha1-x86_64.pl +32 −20 Original line number Diff line number Diff line Loading @@ -28,8 +28,8 @@ # Bulldozer 5.77[+6.0] 11.72 6.37 +84% # # AES-192-CBC # Westmere 4.51 10.00 6.87 +46% # Sandy Bridge 6.05 11.06(12.21) 6.11(7.20) +81%(+70%) # Westmere 4.51 10.00 6.91 +45% # Sandy Bridge 6.05 11.06(12.21) 6.11(7.18) +81%(+70%) # Ivy Bridge 6.05 10.65 6.07 +75% # Haswell 5.29 8.86(9.42) 5.32(5.32) +67%(+77%) # Bulldozer 6.89 12.84 6.96 +84% Loading Loading @@ -66,8 +66,13 @@ # Westmere 1.75 7.20 6.68 +7.8% # Sandy Bridge 1.09 6.09(7.22) 5.82(6.95) +4.6%(+3.9%) # Ivy Bridge 1.11 5.70 5.45 +4.6% # Haswell 0.88 4.45(5.00) 4.39(4.69) +1.4%(+6.6%) # Bulldozer 0.99 6.95 5.95 +17% # Haswell 0.88 4.45(5.00) 4.39(4.69) +1.4%(*)(+6.6%) # Bulldozer 0.99 6.95 5.95 +17%(**) # # (*) Tiny improvement coefficient on Haswell is because we compare # AVX1 stitch to sum with AVX2 SHA1. # (**) Execution is fully dominated by integer code sequence and # SIMD still hardly shows [in single-process benchmark;-] $flavour = shift; $output = shift; Loading Loading @@ -142,11 +147,13 @@ my @rndkey=("%xmm14","%xmm15"); # for enc my ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(12..15)); # for dec if (1) { # reassign for Atom Silvermont @X=map("%xmm$_",(8..15)); @Tx=map("%xmm$_",(5..7)); ($iv,$in,$rndkey0)=map("%xmm$_",(2..4)); # for enc @rndkey=("%xmm0","%xmm1"); # for enc ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(0..3)); # for dec # The goal is to minimize amount of instructions with more than # 3 prefix bytes. Or in more practical terms to keep AES-NI *and* # SSSE3 instructions to upper half of the register bank. @X=map("%xmm$_",(8..11,4..7)); @Tx=map("%xmm$_",(12,13,3)); ($iv,$in,$rndkey0)=map("%xmm$_",(2,14,15)); @rndkey=("%xmm0","%xmm1"); } sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm Loading Loading @@ -216,17 +223,17 @@ $code.=<<___; xor $D,@T[1] and @T[1],@T[0] movdqa 64($K_XX_XX),@X[2] # pbswap mask movdqa 64($K_XX_XX),@Tx[2] # pbswap mask movdqa 0($K_XX_XX),@Tx[1] # K_00_19 movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] movdqu 16($inp),@X[-3&7] movdqu 32($inp),@X[-2&7] movdqu 48($inp),@X[-1&7] pshufb @X[2],@X[-4&7] # byte swap pshufb @Tx[2],@X[-4&7] # byte swap add \$64,$inp pshufb @X[2],@X[-3&7] pshufb @X[2],@X[-2&7] pshufb @X[2],@X[-1&7] pshufb @Tx[2],@X[-3&7] pshufb @Tx[2],@X[-2&7] pshufb @Tx[2],@X[-1&7] paddd @Tx[1],@X[-4&7] # add K_00_19 paddd @Tx[1],@X[-3&7] paddd @Tx[1],@X[-2&7] Loading Loading @@ -704,6 +711,11 @@ ___ $j=$jj=$r=$sn=$rx=0; $Xi=4; # reassign for Atom Silvermont (see above) ($inout0,$inout1,$inout2,$inout3,$rndkey0)=map("%xmm$_",(0..4)); @X=map("%xmm$_",(8..13,6,7)); @Tx=map("%xmm$_",(14,15,5)); my @aes256_dec = ( '&movdqu($inout0,"0x00($in0)");', '&movdqu($inout1,"0x10($in0)"); &pxor ($inout0,$rndkey0);', Loading Loading @@ -844,17 +856,17 @@ $code.=<<___; xor $D,@T[1] and @T[1],@T[0] movdqa 64($K_XX_XX),@X[2] # pbswap mask movdqa 64($K_XX_XX),@Tx[2] # pbswap mask movdqa 0($K_XX_XX),@Tx[1] # K_00_19 movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] movdqu 16($inp),@X[-3&7] movdqu 32($inp),@X[-2&7] movdqu 48($inp),@X[-1&7] pshufb @X[2],@X[-4&7] # byte swap pshufb @Tx[2],@X[-4&7] # byte swap add \$64,$inp pshufb @X[2],@X[-3&7] pshufb @X[2],@X[-2&7] pshufb @X[2],@X[-1&7] pshufb @Tx[2],@X[-3&7] pshufb @Tx[2],@X[-2&7] pshufb @Tx[2],@X[-1&7] paddd @Tx[1],@X[-4&7] # add K_00_19 paddd @Tx[1],@X[-3&7] paddd @Tx[1],@X[-2&7] Loading Loading @@ -1407,7 +1419,7 @@ $code.=<<___; .size aesni_cbc_sha1_enc_avx,.-aesni_cbc_sha1_enc_avx ___ if ($stiched_decrypt) {{{ if ($stitched_decrypt) {{{ # reset ($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10"); Loading crypto/sha/asm/sha1-x86_64.pl +1 −1 Original line number Diff line number Diff line Loading @@ -68,7 +68,7 @@ # Westmere 7.08 5.44/+30% - # Sandy Bridge 7.93 6.16/+28% 4.99/+59% # Ivy Bridge 6.30 4.63/+36% 4.60/+37% # Haswell 5.98 4.36/+37% 3.57/+67% # Haswell 5.98 4.12/+45% 3.57/+67% # Bulldozer 10.9 5.95/+82% # VIA Nano 10.2 7.46/+37% # Atom 11.0 9.61/+14% Loading Loading
crypto/aes/asm/aesni-sha1-x86_64.pl +32 −20 Original line number Diff line number Diff line Loading @@ -28,8 +28,8 @@ # Bulldozer 5.77[+6.0] 11.72 6.37 +84% # # AES-192-CBC # Westmere 4.51 10.00 6.87 +46% # Sandy Bridge 6.05 11.06(12.21) 6.11(7.20) +81%(+70%) # Westmere 4.51 10.00 6.91 +45% # Sandy Bridge 6.05 11.06(12.21) 6.11(7.18) +81%(+70%) # Ivy Bridge 6.05 10.65 6.07 +75% # Haswell 5.29 8.86(9.42) 5.32(5.32) +67%(+77%) # Bulldozer 6.89 12.84 6.96 +84% Loading Loading @@ -66,8 +66,13 @@ # Westmere 1.75 7.20 6.68 +7.8% # Sandy Bridge 1.09 6.09(7.22) 5.82(6.95) +4.6%(+3.9%) # Ivy Bridge 1.11 5.70 5.45 +4.6% # Haswell 0.88 4.45(5.00) 4.39(4.69) +1.4%(+6.6%) # Bulldozer 0.99 6.95 5.95 +17% # Haswell 0.88 4.45(5.00) 4.39(4.69) +1.4%(*)(+6.6%) # Bulldozer 0.99 6.95 5.95 +17%(**) # # (*) Tiny improvement coefficient on Haswell is because we compare # AVX1 stitch to sum with AVX2 SHA1. # (**) Execution is fully dominated by integer code sequence and # SIMD still hardly shows [in single-process benchmark;-] $flavour = shift; $output = shift; Loading Loading @@ -142,11 +147,13 @@ my @rndkey=("%xmm14","%xmm15"); # for enc my ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(12..15)); # for dec if (1) { # reassign for Atom Silvermont @X=map("%xmm$_",(8..15)); @Tx=map("%xmm$_",(5..7)); ($iv,$in,$rndkey0)=map("%xmm$_",(2..4)); # for enc @rndkey=("%xmm0","%xmm1"); # for enc ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(0..3)); # for dec # The goal is to minimize amount of instructions with more than # 3 prefix bytes. Or in more practical terms to keep AES-NI *and* # SSSE3 instructions to upper half of the register bank. @X=map("%xmm$_",(8..11,4..7)); @Tx=map("%xmm$_",(12,13,3)); ($iv,$in,$rndkey0)=map("%xmm$_",(2,14,15)); @rndkey=("%xmm0","%xmm1"); } sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm Loading Loading @@ -216,17 +223,17 @@ $code.=<<___; xor $D,@T[1] and @T[1],@T[0] movdqa 64($K_XX_XX),@X[2] # pbswap mask movdqa 64($K_XX_XX),@Tx[2] # pbswap mask movdqa 0($K_XX_XX),@Tx[1] # K_00_19 movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] movdqu 16($inp),@X[-3&7] movdqu 32($inp),@X[-2&7] movdqu 48($inp),@X[-1&7] pshufb @X[2],@X[-4&7] # byte swap pshufb @Tx[2],@X[-4&7] # byte swap add \$64,$inp pshufb @X[2],@X[-3&7] pshufb @X[2],@X[-2&7] pshufb @X[2],@X[-1&7] pshufb @Tx[2],@X[-3&7] pshufb @Tx[2],@X[-2&7] pshufb @Tx[2],@X[-1&7] paddd @Tx[1],@X[-4&7] # add K_00_19 paddd @Tx[1],@X[-3&7] paddd @Tx[1],@X[-2&7] Loading Loading @@ -704,6 +711,11 @@ ___ $j=$jj=$r=$sn=$rx=0; $Xi=4; # reassign for Atom Silvermont (see above) ($inout0,$inout1,$inout2,$inout3,$rndkey0)=map("%xmm$_",(0..4)); @X=map("%xmm$_",(8..13,6,7)); @Tx=map("%xmm$_",(14,15,5)); my @aes256_dec = ( '&movdqu($inout0,"0x00($in0)");', '&movdqu($inout1,"0x10($in0)"); &pxor ($inout0,$rndkey0);', Loading Loading @@ -844,17 +856,17 @@ $code.=<<___; xor $D,@T[1] and @T[1],@T[0] movdqa 64($K_XX_XX),@X[2] # pbswap mask movdqa 64($K_XX_XX),@Tx[2] # pbswap mask movdqa 0($K_XX_XX),@Tx[1] # K_00_19 movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] movdqu 16($inp),@X[-3&7] movdqu 32($inp),@X[-2&7] movdqu 48($inp),@X[-1&7] pshufb @X[2],@X[-4&7] # byte swap pshufb @Tx[2],@X[-4&7] # byte swap add \$64,$inp pshufb @X[2],@X[-3&7] pshufb @X[2],@X[-2&7] pshufb @X[2],@X[-1&7] pshufb @Tx[2],@X[-3&7] pshufb @Tx[2],@X[-2&7] pshufb @Tx[2],@X[-1&7] paddd @Tx[1],@X[-4&7] # add K_00_19 paddd @Tx[1],@X[-3&7] paddd @Tx[1],@X[-2&7] Loading Loading @@ -1407,7 +1419,7 @@ $code.=<<___; .size aesni_cbc_sha1_enc_avx,.-aesni_cbc_sha1_enc_avx ___ if ($stiched_decrypt) {{{ if ($stitched_decrypt) {{{ # reset ($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10"); Loading
crypto/sha/asm/sha1-x86_64.pl +1 −1 Original line number Diff line number Diff line Loading @@ -68,7 +68,7 @@ # Westmere 7.08 5.44/+30% - # Sandy Bridge 7.93 6.16/+28% 4.99/+59% # Ivy Bridge 6.30 4.63/+36% 4.60/+37% # Haswell 5.98 4.36/+37% 3.57/+67% # Haswell 5.98 4.12/+45% 3.57/+67% # Bulldozer 10.9 5.95/+82% # VIA Nano 10.2 7.46/+37% # Atom 11.0 9.61/+14% Loading