Newer
Older
Ralf S. Engelschall
committed
_______________
Changes between 0.9.6 and 0.9.7 [xx XXX 2001]
OpenSSL 0.9.6a/0.9.6b (bugfix releases, 5 Apr 2001 and 9 July 2001)
Change log entries are tagged as follows:
-) applies to 0.9.6a/0.9.6b/0.9.6c only
*) applies to 0.9.6a/0.9.6b/0.9.6c and 0.9.7
+) applies to 0.9.7 only
+) Test for certificates which contain unsupported critical extensions.
If such a certificate is found during a verify operation it is
rejected by default: this behaviour can be overridden by either
handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
X509_supported_extension() has also been added which returns 1 if a
particular extension is supported.
[Steve Henson]
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
+) New functions/macros
SSL_CTX_set_msg_callback(ctx, cb)
SSL_CTX_set_msg_callback_arg(ctx, arg)
SSL_set_msg_callback(ssl, cb)
SSL_set_msg_callback_arg(ssl, arg)
to request calling a callback function
void cb(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg)
whenever a protocol message has been completely received
(write_p == 0) or sent (write_p == 1). Here 'version' is the
protocol version according to which the SSL library interprets
the current protocol message (SSL2_VERSION, SSL3_VERSION, or
TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
the content type as defined in the SSL 3.0/TLS 1.0 protocol
specification (change_cipher_spec(20), alert(21), handshake(22)).
'buf' and 'len' point to the actual message, 'ssl' to the
SSL object, and 'arg' is the application-defined value set by
SSL[_CTX]_set_msg_callback_arg().
'openssl s_client' and 'openssl s_server' have new '-msg' options
to enable a callback that displays all protocol messages.
TODO: SSL 2.0, doc/ssl/, doc/apps/
[Bodo Moeller]
*) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
(sent using the client's version number) if client_version is
smaller than the protocol version in use. Also change
ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
the client will at least see that alert.
[Bodo Moeller]
+) Modify the behaviour of EVP cipher functions in similar way to digests
to retain compatibility with existing code.
[Steve Henson]
+) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
compatibility with existing code. In particular the 'ctx' parameter does
not have to be to be initialized before the call to EVP_DigestInit() and
it is tidied up after a call to EVP_DigestFinal(). New function
EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
EVP_MD_CTX_copy() changed to not require the destination to be
initialized valid and new function EVP_MD_CTX_copy_ex() added which
requires the destination to be valid.
Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
+) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
so that complete 'Handshake' protocol structures are kept in memory
instead of overwriting 'msg_type' and 'length' with 'body' data.
[Bodo Moeller]
*) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
correctly.
[Bodo Moeller]
+) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
[Massimo Santin via Richard Levitte]
+) Major restructuring to the underlying ENGINE code. This includes
reduction of linker bloat, separation of pure "ENGINE" manipulation
(initialisation, etc) from functionality dealing with implementations
of specific crypto iterfaces. This change also introduces integrated
support for symmetric ciphers and digest implementations - so ENGINEs
can now accelerate these by providing EVP_CIPHER and EVP_MD
implementations of their own. This is detailed in crypto/engine/README
as it couldn't be adequately described here. However, there are a few
API changes worth noting - some RSA, DSA, DH, and RAND functions that
were changed in the original introduction of ENGINE code have now
reverted back - the hooking from this code to ENGINE is now a good
deal more passive and at run-time, operations deal directly with
RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
dereferencing through an ENGINE pointer any more. Also, the ENGINE
functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
they were not being used by the framework as there is no concept of a
BIGNUM_METHOD and they could not be generalised to the new
'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
ENGINE_cpy() has been removed as it cannot be consistently defined in
the new code.
[Geoff Thorpe]
+) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
[Steve Henson]
+) Change mkdef.pl to sort symbols that get the same entry number,
and make sure the automatically generated functions ERR_load_*
become part of libeay.num as well.
[Richard Levitte]
*) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
client receives HelloRequest while in a handshake.
[Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
+) New function SSL_renegotiate_pending(). This returns true once
renegotiation has been requested (either SSL_renegotiate() call
or HelloRequest/ClientHello receveived from the peer) and becomes
false once a handshake has been completed.
(For servers, SSL_renegotiate() followed by SSL_do_handshake()
sends a HelloRequest, but does not ensure that a handshake takes
place. SSL_renegotiate_pending() is useful for checking if the
client has followed the request.)
[Bodo Moeller]
+) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
By default, clients may request session resumption even during
renegotiation (if session ID contexts permit); with this option,
session resumption is possible only in the first handshake.
[Bodo Moeller]
*) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
should end in 'break', not 'goto end' which circuments various
cleanups done in state SSL_ST_OK. But session related stuff
must be disabled for SSL_ST_OK in the case that we just sent a
HelloRequest.
Also avoid some overhead by not calling ssl_init_wbio_buffer()
before just sending a HelloRequest.
[Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
*) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
reveal whether illegal block cipher padding was found or a MAC
verification error occured. (Neither SSLerr() codes nor alerts
are directly visible to potential attackers, but the information
may leak via logfiles.)
Similar changes are not required for the SSL 2.0 implementation
because the number of padding bytes is sent in clear for SSL 2.0,
and the extra bytes are just ignored. However ssl/s2_pkt.c
failed to verify that the purported number of padding bytes is in
the legal range.
[Bodo Moeller]
+) Add some demos for certificate and certificate request creation.
[Steve Henson]
+) Make maximum certificate chain size accepted from the peer application
settable (SSL*_get/set_max_cert_list()), as proposed by
"Douglas E. Engert" <deengert@anl.gov>.
[Lutz Jaenicke]
+) Add support for shared libraries for Unixware-7 and support including
shared libraries for OpenUNIX-8 (Boyd Lynn Gerber <gerberb@zenez.com>).
[Lutz Jaenicke]
*) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
'wristwatch attack' using huge encoding parameters (cf.
James H. Manger's CRYPTO 2001 paper). Note that the
RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
+) Add a "destroy" handler to ENGINEs that allows structural cleanup to
be done prior to destruction. Use this to unload error strings from
ENGINEs that load their own error strings. NB: This adds two new API
functions to "get" and "set" this destroy handler in an ENGINE.
+) Alter all existing ENGINE implementations (except "openssl" and
"openbsd") to dynamically instantiate their own error strings. This
makes them more flexible to be built both as statically-linked ENGINEs
and self-contained shared-libraries loadable via the "dynamic" ENGINE.
Also, add stub code to each that makes building them as self-contained
shared-libraries easier (see README.ENGINE).
[Geoff Thorpe]
+) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
implementations into applications that are completely implemented in
self-contained shared-libraries. The "dynamic" ENGINE exposes control
commands that can be used to configure what shared-library to load and
to control aspects of the way it is handled. Also, made an update to
the README.ENGINE file that brings its information up-to-date and
provides some information and instructions on the "dynamic" ENGINE
(ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
[Geoff Thorpe]
*) BN_sqr() bug fix.
[Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
*) Make it possible to unload ranges of ERR strings with a new
"ERR_unload_strings" function.
[Geoff Thorpe]
*) Rabin-Miller test analyses assume uniformly distributed witnesses,
so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
followed by modular reduction.
[Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
*) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
+) Add a copy() function to EVP_MD.
[Ben Laurie]
+) Make EVP_MD routines take a context pointer instead of just the
[Ben Laurie]
+) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
that the digest can only process a single chunk of data
(typically because it is provided by a piece of
hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
is only going to provide a single chunk of data, and hence the
framework needn't accumulate the data for oneshot drivers.
[Ben Laurie]
+) As with "ERR", make it possible to replace the underlying "ex_data"
functions. This change also alters the storage and management of global
ex_data state - it's now all inside ex_data.c and all "class" code (eg.
RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
index counters. The API functions that use this state have been changed
to take a "class_index" rather than pointers to the class's local STACK
and counter, and there is now an API function to dynamically create new
classes. This centralisation allows us to (a) plug a lot of the
thread-safety problems that existed, and (b) makes it possible to clean
up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
such data would previously have always leaked in application code and
workarounds were in place to make the memory debugging turn a blind eye
to it. Application code that doesn't use this new function will still
leak as before, but their memory debugging output will announce it now
rather than letting it slide.
Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
has a return value to indicate success or failure.
+) Make it possible to replace the underlying "ERR" functions such that the
global state (2 LHASH tables and 2 locks) is only used by the "default"
implementation. This change also adds two functions to "get" and "set"
the implementation prior to it being automatically set the first time
any other ERR function takes place. Ie. an application can call "get",
pass the return value to a module it has just loaded, and that module
can call its own "set" function using that value. This means the
module's "ERR" operations will use (and modify) the error state in the
application and not in its own statically linked copy of OpenSSL code.
[Geoff Thorpe]
+) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
reference counts. This performs normal REF_PRINT/REF_CHECK macros on
the operation, and provides a more encapsulated way for external code
(crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
to use these functions rather than manually incrementing the counts.
Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
Lutz Jänicke
committed
*) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
This function was broken, as the check for a new client hello message
to handle SGC did not allow these large messages.
(Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
[Lutz Jaenicke]
*) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
[Lutz Jaenicke]
+) Add symmetric cipher support to ENGINE. Expect the API to change!
[Ben Laurie]
+) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
These allow a CRL to be built without having to access X509_CRL fields
directly. Modify 'ca' application to use new functions.
[Steve Henson]
*) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
[Lutz Jaenicke]
*) Rework the configuration and shared library support for Tru64 Unix.
The configuration part makes use of modern compiler features and
still retains old compiler behavior for those that run older versions
of the OS. The shared library support part includes a variant that
configuration target "alpha-cc-rpath", which will never be selected
automatically.
[Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
*) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
with the same message size as in ssl3_get_certificate_request().
Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
messages might inadvertently be reject as too long.
[Petr Lampa <lampa@fee.vutbr.cz>]
+) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
bug workarounds. Rollback attack detection is a security feature.
The problem will only arise on OpenSSL servers when TLSv1 is not
available (sslv3_server_method() or SSL_OP_NO_TLSv1).
Software authors not wanting to support TLSv1 will have special reasons
for their choice and can explicitly enable this option.
[Bodo Moeller, Lutz Jaenicke]
+) Rationalise EVP so it can be extended: don't include a union of
cipher/digest structures, add init/cleanup functions. This also reduces
the number of header dependencies.
[Ben Laurie]
+) Make DES key schedule conform to the usual scheme, as well as
correcting its structure. This means that calls to DES functions
now have to pass a pointer to a des_key_schedule instead of a
plain des_key_schedule (which was actually always a pointer
anyway).
+) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
[Andy Polyakov]
*) Modified SSL library such that the verify_callback that has been set
specificly for an SSL object with SSL_set_verify() is actually being
used. Before the change, a verify_callback set with this function was
ignored and the verify_callback() set in the SSL_CTX at the time of
the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
to allow the necessary settings.
[Lutz Jaenicke]
+) Initial reduction of linker bloat: the use of some functions, such as
PEM causes large amounts of unused functions to be linked in due to
poor organisation. For example pem_all.c contains every PEM function
which has a knock on effect of linking in large amounts of (unused)
ASN1 code. Grouping together similar functions and splitting unrelated
functions prevents this.
[Steve Henson]
*) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
explicitly to NULL, as at least on Solaris 8 this seems not always to be
done automatically (in contradiction to the requirements of the C
standard). This made problems when used from OpenSSH.
[Lutz Jaenicke]
*) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
dh->length and always used
BN_rand_range(priv_key, dh->p).
BN_rand_range() is not necessary for Diffie-Hellman, and this
specific range makes Diffie-Hellman unnecessarily inefficient if
dh->length (recommended exponent length) is much smaller than the
length of dh->p. We could use BN_rand_range() if the order of
the subgroup was stored in the DH structure, but we only have
dh->length.
So switch back to
BN_rand(priv_key, l, ...)
where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
otherwise.
[Bodo Moeller]
*) In
RSA_eay_public_encrypt
RSA_eay_private_decrypt
RSA_eay_private_encrypt (signing)
RSA_eay_public_decrypt (signature verification)
(default implementations for RSA_public_encrypt,
RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
always reject numbers >= n.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
to synchronize access to 'locking_thread'. This is necessary on
systems where access to 'locking_thread' (an 'unsigned long'
variable) is not atomic.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
*before* setting the 'crypto_lock_rand' flag. The previous code had
a race condition if 0 is a valid thread ID.
[Travis Vitek <vitek@roguewave.com>]
+) Cleanup of EVP macros.
[Ben Laurie]
+) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
correct _ecb suffix.
[Ben Laurie]
+) Add initial OCSP responder support to ocsp application. The
revocation information is handled using the text based index
use by the ca application. The responder can either handle
requests generated internally, supplied in files (for example
via a CGI script) or using an internal minimal server.
[Steve Henson]
+) Add configuration choices to get zlib compression for TLS.
[Richard Levitte]
+) Changes to Kerberos SSL for RFC 2712 compliance:
1. Implemented real KerberosWrapper, instead of just using
KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2. Implemented optional authenticator field of KerberosWrapper.
Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
and authenticator structs; see crypto/krb5/.
Generalized Kerberos calls to support multiple Kerberos libraries.
[Vern Staats <staatsvr@asc.hpc.mil>,
Jeffrey Altman <jaltman@columbia.edu>
via Richard Levitte]
+) Cause 'openssl speed' to use fully hard-coded DSA keys as it
already does with RSA. testdsa.h now has 'priv_key/pub_key'
values for each of the key sizes rather than having just
parameters (and 'speed' generating keys each time).
[Geoff Thorpe]
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
-) OpenSSL 0.9.6b released [9 July 2001]
*) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
PRNG state recovery was possible based on the output of
one PRNG request appropriately sized to gain knowledge on
'md' followed by enough consecutive 1-byte PRNG requests
to traverse all of 'state'.
1. When updating 'md_local' (the current thread's copy of 'md')
during PRNG output generation, hash all of the previous
'md_local' value, not just the half used for PRNG output.
2. Make the number of bytes from 'state' included into the hash
independent from the number of PRNG bytes requested.
The first measure alone would be sufficient to avoid
Markku-Juhani's attack. (Actually it had never occurred
to me that the half of 'md_local' used for chaining was the
half from which PRNG output bytes were taken -- I had always
assumed that the secret half would be used.) The second
measure makes sure that additional data from 'state' is never
mixed into 'md_local' in small portions; this heuristically
further strengthens the PRNG.
[Bodo Moeller]
+) Speed up EVP routines.
Before:
encrypt
type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
decrypt
des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
After:
encrypt
des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
*) Fix crypto/bn/asm/mips3.s.
[Andy Polyakov]
*) When only the key is given to "enc", the IV is undefined. Print out
an error message in this case.
[Lutz Jaenicke]
+) Added the OS2-EMX target.
["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
+) Rewrite apps to use NCONF routines instead of the old CONF. New functions
to support NCONF routines in extension code. New function CONF_set_nconf()
to allow functions which take an NCONF to also handle the old LHASH
structure: this means that the old CONF compatible routines can be
retained (in particular wrt extensions) without having to duplicate the
code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
[Steve Henson]
*) Handle special case when X509_NAME is empty in X509 printing routines.
[Steve Henson]
*) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
positive and less than q.
[Bodo Moeller]
+) Enhance the general user interface with mechanisms for inner control
+) Change all calls to low level digest routines in the library and
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
[Verdon Walker <VWalker@novell.com>, Steve Henson]
+) Add the possibility to control engines through control names but with
arbitrary arguments instead of just a string.
Change the key loaders to take a UI_METHOD instead of a callback
function pointer. NOTE: this breaks binary compatibility with earlier
versions of OpenSSL [engine].
Adapt the nCipher code for these new conditions and add a card insertion
callback.
[Richard Levitte]
+) Enhance the general user interface with mechanisms to better support
dialog box interfaces, application-defined prompts, the possibility
to use defaults (for example default passwords from somewhere else)
[Richard Levitte]
*) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
used: it isn't thread safe and the add_lock_callback should handle
that itself.
[Paul Rose <Paul.Rose@bridge.com>]
*) Verify that incoming data obeys the block size in
ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
[Bodo Moeller]
+) Tidy up PKCS#12 attribute handling. Add support for the CSP name
attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
[Steve Henson]
*) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
when fixing the server behaviour for backwards-compatible 'client
hello' messages. (Note that the attack is impractical against
SSL 3.0 and TLS 1.0 anyway because length and version checking
means that the probability of guessing a valid ciphertext is
around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
paper.)
Before 0.9.5, the countermeasure (hide the error by generating a
random 'decryption result') did not work properly because
ERR_clear_error() was missing, meaning that SSL_get_error() would
detect the supposedly ignored error.
Both problems are now fixed.
[Bodo Moeller]
*) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
(previously it was 1024).
[Bodo Moeller]
+) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
[Geoff, reported by Diego Tartara <dtartara@novamens.com>]
+) Change the key loading routines for ENGINEs to use the same kind
callback (pem_password_cb) as all other routines that need this
kind of callback.
[Richard Levitte]
*) Fix for compatibility mode trust settings: ignore trust settings
unless some valid trust or reject settings are present.
[Steve Henson]
*) Fix for blowfish EVP: its a variable length cipher.
[Steve Henson]
+) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
256 bit (=32 byte) keys. Of course seeding with more entropy bytes
than this minimum value is recommended.
[Lutz Jaenicke]
+) New random seeder for OpenVMS, using the system process statistics
that are easily reachable.
[Richard Levitte]
+) Windows apparently can't transparently handle global
variables defined in DLLs. Initialisations such as:
const ASN1_ITEM *it = &ASN1_INTEGER_it;
wont compile. This is used by the any applications that need to
EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
needed for static libraries under Win32.
[Steve Henson]
+) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
setting of purpose and trust fields. New X509_STORE trust and
purpose functions and tidy up setting in other SSL functions.
[Steve Henson]
+) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
structure. These are inherited by X509_STORE_CTX when it is
initialised. This allows various defaults to be set in the
X509_STORE structure (such as flags for CRL checking and custom
purpose or trust settings) for functions which only use X509_STORE_CTX
internally such as S/MIME.
Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
trust settings if they are not set in X509_STORE. This allows X509_STORE
purposes and trust (in S/MIME for example) to override any set by default.
Add command line options for CRL checking to smime, s_client and s_server
applications.
[Steve Henson]
+) Initial CRL based revocation checking. If the CRL checking flag(s)
are set then the CRL is looked up in the X509_STORE structure and
its validity and signature checked, then if the certificate is found
in the CRL the verify fails with a revoked error.
Various new CRL related callbacks added to X509_STORE_CTX structure.
Command line options added to 'verify' application to support this.
This needs some additional work, such as being able to handle multiple
CRLs with different times, extension based lookup (rather than just
by subject name) and ultimately more complete V2 CRL extension
handling.
[Steve Henson]
+) Add a general user interface API (crypto/ui/). This is designed
to replace things like des_read_password and friends (backward
compatibility functions using this new API are provided).
The purpose is to remove prompting functions from the DES code
section as well as provide for prompting through dialog boxes in
a window system and the like.
[Richard Levitte]
*) Fix various bugs related to DSA S/MIME verification. Handle missing
parameters in DSA public key structures and return an error in the
DSA routines if parameters are absent.
[Steve Henson]
*) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
in the current directory if neither $RANDFILE nor $HOME was set.
RAND_file_name() in 0.9.6a returned NULL in this case. This has
caused some confusion to Windows users who haven't defined $HOME.
Thus RAND_file_name() is changed again: e_os.h can define a
DEFAULT_HOME, which will be used if $HOME is not set.
For Windows, we use "C:"; on other platforms, we still require
environment variables.
+) Add "ex_data" support to ENGINE so implementations can add state at a
per-structure level rather than having to store it globally.
[Geoff]
+) Make it possible for ENGINE structures to be copied when retrieved by
ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
This causes the "original" ENGINE structure to act like a template,
analogous to the RSA vs. RSA_METHOD type of separation. Because of this
operational state can be localised to each ENGINE structure, despite the
fact they all share the same "methods". New ENGINE structures returned in
this case have no functional references and the return value is the single
structural reference. This matches the single structural reference returned
by ENGINE_by_id() normally, when it is incremented on the pre-existing
ENGINE structure.
[Geoff]
+) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
needs to match any other type at all we need to manually clear the
tag cache.
[Steve Henson]
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
+) Changes to the "openssl engine" utility to include;
- verbosity levels ('-v', '-vv', and '-vvv') that provide information
about an ENGINE's available control commands.
- executing control commands from command line arguments using the
'-pre' and '-post' switches. '-post' is only used if '-t' is
specified and the ENGINE is successfully initialised. The syntax for
the individual commands are colon-separated, for example;
openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
[Geoff]
+) New dynamic control command support for ENGINEs. ENGINEs can now
declare their own commands (numbers), names (strings), descriptions,
and input types for run-time discovery by calling applications. A
subset of these commands are implicitly classed as "executable"
depending on their input type, and only these can be invoked through
the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
can be based on user input, config files, etc). The distinction is
that "executable" commands cannot return anything other than a boolean
result and can only support numeric or string input, whereas some
discoverable commands may only be for direct use through
ENGINE_ctrl(), eg. supporting the exchange of binary data, function
pointers, or other custom uses. The "executable" commands are to
support parameterisations of ENGINE behaviour that can be
unambiguously defined by ENGINEs and used consistently across any
OpenSSL-based application. Commands have been added to all the
existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
control over shared-library paths without source code alterations.
[Geoff]
+) Changed all ENGINE implementations to dynamically allocate their
ENGINEs rather than declaring them statically. Apart from this being
necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
this also allows the implementations to compile without using the
internal engine_int.h header.
[Geoff]
+) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
'const' value. Any code that should be able to modify a RAND_METHOD
should already have non-const pointers to it (ie. they should only
modify their own ones).
[Geoff]
+) Made a variety of little tweaks to the ENGINE code.
- "atalla" and "ubsec" string definitions were moved from header files
to C code. "nuron" string definitions were placed in variables
rather than hard-coded - allowing parameterisation of these values
later on via ctrl() commands.
- Removed unused "#if 0"'d code.
- Fixed engine list iteration code so it uses ENGINE_free() to release
structural references.
- Constified the RAND_METHOD element of ENGINE structures.
- Constified various get/set functions as appropriate and added
missing functions (including a catch-all ENGINE_cpy that duplicates
all ENGINE values onto a new ENGINE except reference counts/state).
- Removed NULL parameter checks in get/set functions. Setting a method
or function to NULL is a way of cancelling out a previously set
value. Passing a NULL ENGINE parameter is just plain stupid anyway
and doesn't justify the extra error symbols and code.
- Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
flags from engine_int.h to engine.h.
- Changed prototypes for ENGINE handler functions (init(), finish(),
ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
[Geoff]
*) Move 'if (!initialized) RAND_poll()' into regions protected by
CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
[Bodo Moeller]
*) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
combination of a flag and a thread ID variable.
Otherwise while one thread is in ssleay_rand_bytes (which sets the
flag), *other* threads can enter ssleay_add_bytes without obeying
that they do not hold after the first thread unsets add_do_not_lock).
[Bodo Moeller]
+) Implement binary inversion algorithm for BN_mod_inverse in addition
used only if the modulus is odd. On 32-bit systems, it is faster
only for relatively small moduli (roughly 20-30% for 128-bit moduli,
roughly 5-15% for 256-bit moduli), so we use it only for moduli
up to 450 bits. In 64-bit environments, the binary algorithm
appears to be advantageous for much longer moduli; here we use it
for moduli up to 2048 bits.
*) Change bctest again: '-x' expressions are not available in all
versions of 'test'.
[Bodo Moeller]
-) OpenSSL 0.9.6a released [5 Apr 2001]
*) Fix a couple of memory leaks in PKCS7_dataDecode()
[Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
*) Change Configure and Makefiles to provide EXE_EXT, which will contain
the default extension for executables, if any. Also, make the perl
scripts that use symlink() to test if it really exists and use "cp"
if it doesn't. All this made OpenSSL compilable and installable in
CygWin.
[Richard Levitte]
+) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
could not support the combine flag in choice fields.
[Steve Henson]
-) Fix for asn1_GetSequence() for indefinite length constructed data.
If SEQUENCE is length is indefinite just set c->slen to the total
amount of data available.
[Steve Henson, reported by shige@FreeBSD.org]
[This change does not apply to 0.9.7.]
*) Change bctest to avoid here-documents inside command substitution
(workaround for FreeBSD /bin/sh bug).
For compatibility with Ultrix, avoid shell functions (introduced
in the bctest version that searches along $PATH).
[Bodo Moeller]
*) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
with des_encrypt() defined on some operating systems, like Solaris
and UnixWare.
[Richard Levitte]
*) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
On the Importance of Eliminating Errors in Cryptographic
Computations, J. Cryptology 14 (2001) 2, 101-119,
http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
[Ulf Moeller]
*) Disabled incorrect Alpha assembler code.
[Richard Levitte]
-) Fix PKCS#7 decode routines so they correctly update the length
after reading an EOC for the EXPLICIT tag.
[Steve Henson]
[This change does not apply to 0.9.7.]
*) Fix bug in PKCS#12 key generation routines. This was triggered
if a 3DES key was generated with a 0 initial byte. Include
PKCS12_BROKEN_KEYGEN compilation option to retain the old
(but broken) behaviour.
[Steve Henson]
*) Enhance bctest to search for a working bc along $PATH and print
it when found.
[Tim Rice <tim@multitalents.net> via Richard Levitte]
+) Add a 'copy_extensions' option to the 'ca' utility. This copies
extensions from a certificate request to the certificate.
[Steve Henson]
+) Allow multiple 'certopt' and 'nameopt' options to be separated
by commas. Add 'namopt' and 'certopt' options to the 'ca' config
file: this allows the display of the certificate about to be
signed to be customised, to allow certain fields to be included
or excluded and extension details. The old system didn't display
multicharacter strings properly, omitted fields not in the policy
and couldn't display additional details such as extensions.
[Steve Henson]
*) Fix memory leaks in err.c: free err_data string if necessary;
don't write to the wrong index in ERR_set_error_data.
+) Function EC_POINTs_mul for simultaneous scalar multiplication
of an arbitrary number of elliptic curve points, optionally
including the generator defined for the EC_GROUP.
EC_POINT_mul is a simple wrapper function for the typical case
that the point list has just one item (besides the optional
generator).
[Bodo Moeller]
+) First EC_METHODs for curves over GF(p):
EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
operations and provides various method functions that can also
operate with faster implementations of modular arithmetic.
EC_GFp_mont_method() reuses most functions that are part of
EC_GFp_simple_method, but uses Montgomery arithmetic.
[Bodo Moeller; point addition and point doubling
implementation directly derived from source code provided by
Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
+) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
crypto/ec/ec_lib.c):
Curves are EC_GROUP objects (with an optional group generator)
based on EC_METHODs that are built into the library.
Points are EC_POINT objects based on EC_GROUP objects.
Most of the framework would be able to handle curves over arbitrary
finite fields, but as there are no obvious types for fields other
than GF(p), some functions are limited to that for now.
[Bodo Moeller]
+) Add the -HTTP option to s_server. It is similar to -WWW, but requires
that the file contains a complete HTTP response.
[Richard Levitte]
+) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
change the def and num file printf format specifier from "%-40sXXX"
to "%-39s XXX". The latter will always guarantee a space after the
field while the former will cause them to run together if the field
is 40 of more characters long.
[Steve Henson]
+) Constify the cipher and digest 'method' functions and structures
and modify related functions to take constant EVP_MD and EVP_CIPHER
pointers.
[Steve Henson]
*) Implement ssl23_peek (analogous to ssl23_read), which previously
did not exist.
[Bodo Moeller]
*) Replace rdtsc with _emit statements for VC++ version 5.
[Jeremy Cooper <jeremy@baymoo.org>]
+) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
+) Modify EVP_Digest*() routines so they now return values. Although the
internal software routines can never fail additional hardware versions
might.
[Steve Henson]
+) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
(= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
ASN1 error codes
ERR_R_NESTED_ASN1_ERROR
...
ERR_R_MISSING_ASN1_EOS
were 4 .. 9, conflicting with
ERR_LIB_RSA (= ERR_R_RSA_LIB)
...
ERR_LIB_PEM (= ERR_R_PEM_LIB).
They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
Add new error code 'ERR_R_INTERNAL_ERROR'.
[Bodo Moeller]
+) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
+) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
sets the subject name for a new request or supersedes the
subject name in a given request. Formats that can be parsed are
'CN=Some Name, OU=myOU, C=IT'
and
'CN=Some Name/OU=myOU/C=IT'.
Add options '-batch' and '-verbose' to 'openssl req'.
[Massimiliano Pala <madwolf@hackmasters.net>]
*) Make it possible to reuse SSLv2 sessions.
[Richard Levitte]
+) Introduce the possibility to access global variables through
functions on platform were that's the best way to handle exporting
global variables in shared libraries. To enable this functionality,
one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
"OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
is normally done by Configure or something similar).
To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
in the source file (foo.c) like this:
OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
OPENSSL_IMPLEMENT_GLOBAL(double,bar);
To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
OPENSSL_DECLARE_GLOBAL(int,foo);
#define foo OPENSSL_GLOBAL_REF(foo)
OPENSSL_DECLARE_GLOBAL(double,bar);
#define bar OPENSSL_GLOBAL_REF(bar)
The #defines are very important, and therefore so is including the
The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
The largest change is in util/mkdef.pl which has been enhanced with
better and easier to understand logic to choose which symbols should
go into the Windows .def files as well as a number of fixes and code
cleanup (among others, algorithm keywords are now sorted
lexicographically to avoid constant rewrites).
[Richard Levitte]
*) In copy_email() check for >= 0 as a return value for
X509_NAME_get_index_by_NID() since 0 is a valid index.
[Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
+) In BN_div() keep a copy of the sign of 'num' before writing the