Configure

		
			if (/^err$/)	{ $flags .= "-DOPENSSL_NO_ERR "; }
			elsif (/^asm$/)	{ $no_asm = 1; }
			}
		else
			{
			$openssl_algorithm_defines .= "#define OPENSSL_NO_$ALGO\n";
			print " OPENSSL_NO_$ALGO";

			if (/^krb5$/)
				{ $no_krb5 = 1; }
			else
				{
				push @skip, $algo;
				print " (skip dir)";

				$depflags .= " -DOPENSSL_NO_$ALGO";
				}
			}
		}

	print "\n";
	}

my $exp_cflags = "";
foreach (sort @experimental)
	{
	my $ALGO;
	($ALGO = $_) =~ tr/[a-z]/[A-Z]/;

	# opensslconf.h will set OPENSSL_NO_... unless OPENSSL_EXPERIMENTAL_... is defined
	$openssl_experimental_defines .= "#define OPENSSL_NO_$ALGO\n";
	$exp_cflags .= " -DOPENSSL_EXPERIMENTAL_$ALGO";
	}

my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;

$exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target =~ /^mingw/);
$exe_ext=".nlm" if ($target =~ /netware/);
$exe_ext=".pm"  if ($target =~ /vos/);
$openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
$prefix=$openssldir if $prefix eq "";

$libdir="lib" if $libdir eq "";

$default_ranlib= &which("ranlib") or $default_ranlib="true";
$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
  or $perl="perl";
my $make = $ENV{'MAKE'} || "make";

$cross_compile_prefix=$ENV{'CROSS_COMPILE'} if $cross_compile_prefix eq "";

chop $openssldir if $openssldir =~ /\/$/;
chop $prefix if $prefix =~ /.\/$/;

$openssldir=$prefix . "/ssl" if $openssldir eq "";
$openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/])/;


print "IsMK1MF=$IsMK1MF\n";

my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
my $cc = $fields[$idx_cc];
# Allow environment CC to override compiler...
if($ENV{CC}) {
    $cc = $ENV{CC};
}
my $cflags = $fields[$idx_cflags];
my $unistd = $fields[$idx_unistd];
my $thread_cflag = $fields[$idx_thread_cflag];
my $sys_id = $fields[$idx_sys_id];
my $lflags = $fields[$idx_lflags];
my $bn_ops = $fields[$idx_bn_ops];
my $cpuid_obj = $fields[$idx_cpuid_obj];
my $bn_obj = $fields[$idx_bn_obj];
my $des_obj = $fields[$idx_des_obj];
my $aes_obj = $fields[$idx_aes_obj];
my $bf_obj = $fields[$idx_bf_obj];
my $md5_obj = $fields[$idx_md5_obj];
my $sha1_obj = $fields[$idx_sha1_obj];
my $cast_obj = $fields[$idx_cast_obj];
my $rc4_obj = $fields[$idx_rc4_obj];
my $rmd160_obj = $fields[$idx_rmd160_obj];
my $rc5_obj = $fields[$idx_rc5_obj];
my $wp_obj = $fields[$idx_wp_obj];
my $cmll_obj = $fields[$idx_cmll_obj];
my $perlasm_scheme = $fields[$idx_perlasm_scheme];
my $dso_scheme = $fields[$idx_dso_scheme];
my $shared_target = $fields[$idx_shared_target];
my $shared_cflag = $fields[$idx_shared_cflag];
my $shared_ldflag = $fields[$idx_shared_ldflag];
my $shared_extension = $fields[$idx_shared_extension];
my $ranlib = $ENV{'RANLIB'} || $fields[$idx_ranlib];
my $ar = $ENV{'AR'} || "ar";
my $arflags = $fields[$idx_arflags];
my $multilib = $fields[$idx_multilib];

$cflags = "$cflags$exp_cflags";

# '%' in $lflags is used to split flags to "pre-" and post-flags
my ($prelflags,$postlflags)=split('%',$lflags);
if (defined($postlflags))	{ $lflags=$postlflags;	}
else				{ $lflags=$prelflags; undef $prelflags;	}

my $no_shared_warn=0;
my $no_user_cflags=0;

if ($flags ne "")	{ $cflags="$flags$cflags"; }
else			{ $no_user_cflags=1;       }

# Kerberos settings.  The flavor must be provided from outside, either through
# the script "config" or manually.
if (!$no_krb5)
	{
	my ($lresolv, $lpath, $lext);
	if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
		{
		die "Sorry, Heimdal is currently not supported\n";
		}
	##### HACK to force use of Heimdal.
	##### WARNING: Since we don't really have adequate support for Heimdal,
	#####          using this will break the build.  You'll have to make
	#####          changes to the source, and if you do, please send
	#####          patches to openssl-dev@openssl.org
	if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
		{
		warn "Heimdal isn't really supported.  Your build WILL break\n";
		warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
		$withargs{"krb5-dir"} = "/usr/heimdal"
			if $withargs{"krb5-dir"} eq "";
		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
			"/lib -lgssapi -lkrb5 -lcom_err"
			if $withargs{"krb5-lib"} eq "" && !$IsMK1MF;
		$cflags="-DKRB5_HEIMDAL $cflags";
		}
	if ($withargs{"krb5-flavor"} =~ /^[Mm][Ii][Tt]/)
		{
		$withargs{"krb5-dir"} = "/usr/kerberos"
			if $withargs{"krb5-dir"} eq "";
		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
			"/lib -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto"
			if $withargs{"krb5-lib"} eq "" && !$IsMK1MF;
		$cflags="-DKRB5_MIT $cflags";
		$withargs{"krb5-flavor"} =~ s/^[Mm][Ii][Tt][._-]*//;
		if ($withargs{"krb5-flavor"} =~ /^1[._-]*[01]/)
			{
			$cflags="-DKRB5_MIT_OLD11 $cflags";
			}
		}
	LRESOLV:
	foreach $lpath ("/lib", "/usr/lib")
		{
		foreach $lext ("a", "so")
			{
			$lresolv = "$lpath/libresolv.$lext";
			last LRESOLV	if (-r "$lresolv");
			$lresolv = "";
			}
		}
	$withargs{"krb5-lib"} .= " -lresolv"
		if ("$lresolv" ne "");
	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
		if $withargs{"krb5-include"} eq "" &&
		   $withargs{"krb5-dir"} ne "";
	}

# The DSO code currently always implements all functions so that no
# applications will have to worry about that from a compilation point
# of view. However, the "method"s may return zero unless that platform
# has support compiled in for them. Currently each method is enabled
# by a define "DSO_<name>" ... we translate the "dso_scheme" config
# string entry into using the following logic;
my $dso_cflags;
if (!$no_dso && $dso_scheme ne "")
	{
	$dso_scheme =~ tr/[a-z]/[A-Z]/;
	if ($dso_scheme eq "DLFCN")
		{
		$dso_cflags = "-DDSO_DLFCN -DHAVE_DLFCN_H";
		}
	elsif ($dso_scheme eq "DLFCN_NO_H")
		{
		$dso_cflags = "-DDSO_DLFCN";
		}
	else
		{
		$dso_cflags = "-DDSO_$dso_scheme";
		}
	$cflags = "$dso_cflags $cflags";
	}

my $thread_cflags;
my $thread_defines;
if ($thread_cflag ne "(unknown)" && !$no_threads)
	{
	# If we know how to do it, support threads by default.
	$threads = 1;
	}
if ($thread_cflag eq "(unknown)" && $threads)
	{
	# If the user asked for "threads", [s]he is also expected to
	# provide any system-dependent compiler options that are
	# necessary.
	if ($no_user_cflags)
		{
		print "You asked for multi-threading support, but didn't\n";
		print "provide any system-specific compiler options\n";
		exit(1);
		}
	$thread_cflags="-DOPENSSL_THREADS $cflags" ;
	$thread_defines .= "#define OPENSSL_THREADS\n";
	}
else
	{
	$thread_cflags="-DOPENSSL_THREADS $thread_cflag $cflags";
	$thread_defines .= "#define OPENSSL_THREADS\n";
#	my $def;
#	foreach $def (split ' ',$thread_cflag)
#		{
#		if ($def =~ s/^-D// && $def !~ /^_/)
#			{
#			$thread_defines .= "#define $def\n";
#			}
#		}
	}	

$lflags="$libs$lflags" if ($libs ne "");

if ($no_asm)
	{
	$cpuid_obj=$bn_obj=
	$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj=$cmll_obj=
	$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj="";
	}

if (!$no_shared)
	{
	$cast_obj="";	# CAST assembler is not PIC
	}

if ($threads)
	{
	$cflags=$thread_cflags;
	$openssl_thread_defines .= $thread_defines;
	}

if ($zlib)
	{
	$cflags = "-DZLIB $cflags";
	if (defined($disabled{"zlib-dynamic"}))
		{
		if (defined($withargs{"zlib-lib"}))
			{
			$lflags = "$lflags -L" . $withargs{"zlib-lib"} . " -lz";
			}
		else
			{
			$lflags = "$lflags -lz";
			}
		}
	else
		{
		$cflags = "-DZLIB_SHARED $cflags";
		}
	}

# You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
my $shared_mark = "";
if ($shared_target eq "")
	{
	$no_shared_warn = 1 if !$no_shared;
	$no_shared = 1;
	}
if (!$no_shared)
	{
	if ($shared_cflag ne "")
		{
		$cflags = "$shared_cflag -DOPENSSL_PIC $cflags";
		}
	}

if (!$IsMK1MF)
	{
	# add {no-}static-engine to options to allow mkdef.pl to work without extra arguments
	if ($no_shared)
		{
		$openssl_other_defines.="#define OPENSSL_NO_DYNAMIC_ENGINE\n";
		$options.=" static-engine";
		}
	else
		{
		$openssl_other_defines.="#define OPENSSL_NO_STATIC_ENGINE\n";
		$options.=" no-static-engine";
		}
	}

$cpuid_obj.=" uplink.o uplink-cof.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);

#
# Platform fix-ups
#
if ($target =~ /\-icc$/)	# Intel C compiler
	{
	my $iccver=0;
	if (open(FD,"$cc -V 2>&1 |"))
		{
		while(<FD>) { $iccver=$1 if (/Version ([0-9]+)\./); }
		close(FD);
		}
	if ($iccver>=8)
		{
		# Eliminate unnecessary dependency from libirc.a. This is
		# essential for shared library support, as otherwise
		# apps/openssl can end up in endless loop upon startup...
		$cflags.=" -Dmemcpy=__builtin_memcpy -Dmemset=__builtin_memset";
		}
	if ($iccver>=9)
		{
		$cflags.=" -i-static";
		$cflags=~s/\-no_cpprt/-no-cpprt/;
		}
	if ($iccver>=10)
		{
		$cflags=~s/\-i\-static/-static-intel/;
		}
	}

# Unlike other OSes (like Solaris, Linux, Tru64, IRIX) BSD run-time
# linkers (tested OpenBSD, NetBSD and FreeBSD) "demand" RPATH set on
# .so objects. Apparently application RPATH is not global and does
# not apply to .so linked with other .so. Problem manifests itself
# when libssl.so fails to load libcrypto.so. One can argue that we
# should engrave this into Makefile.shared rules or into BSD-* config
# lines above. Meanwhile let's try to be cautious and pass -rpath to
# linker only when --prefix is not /usr.
if ($target =~ /^BSD\-/)
	{
	$shared_ldflag.=" -Wl,-rpath,\$(LIBRPATH)" if ($prefix !~ m|^/usr[/]*$|);
	}

if ($sys_id ne "")
	{
	#$cflags="-DOPENSSL_SYSNAME_$sys_id $cflags";
	$openssl_sys_defines="#define OPENSSL_SYSNAME_$sys_id\n";
	}

if ($ranlib eq "")
	{
	$ranlib = $default_ranlib;
	}

#my ($bn1)=split(/\s+/,$bn_obj);
#$bn1 = "" unless defined $bn1;
#$bn1=$bn_asm unless ($bn1 =~ /\.o$/);
#$bn_obj="$bn1";

$cpuid_obj="" if ($processor eq "386");

$bn_obj = $bn_asm unless $bn_obj ne "";
# bn-586 is the only one implementing bn_*_part_words
$cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn-586/);
$cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /86/);

$cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/);

$cpuid_obj="mem_clr.o"	unless ($cpuid_obj =~ /\.o$/);
$des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
$bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
$cast_obj=$cast_enc	unless ($cast_obj =~ /\.o$/);
$rc4_obj=$rc4_enc	unless ($rc4_obj =~ /\.o$/);
$rc5_obj=$rc5_enc	unless ($rc5_obj =~ /\.o$/);
if ($sha1_obj =~ /\.o$/)
	{
#	$sha1_obj=$sha1_enc;
	$cflags.=" -DSHA1_ASM"   if ($sha1_obj =~ /sx86/ || $sha1_obj =~ /sha1/);
	$cflags.=" -DSHA256_ASM" if ($sha1_obj =~ /sha256/);
	$cflags.=" -DSHA512_ASM" if ($sha1_obj =~ /sha512/);
	if ($sha1_obj =~ /sse2/)
	    {	if ($no_sse2)
		{   $sha1_obj =~ s/\S*sse2\S+//;        }
		elsif ($cflags !~ /OPENSSL_IA32_SSE2/)
		{   $cflags.=" -DOPENSSL_IA32_SSE2";    }
	    }
	}
if ($md5_obj =~ /\.o$/)
	{
#	$md5_obj=$md5_enc;
	$cflags.=" -DMD5_ASM";
	}
if ($rmd160_obj =~ /\.o$/)
	{
#	$rmd160_obj=$rmd160_enc;
	$cflags.=" -DRMD160_ASM";
	}
if ($aes_obj =~ /\.o$/)
	{
	$cflags.=" -DAES_ASM";
	$aes_obj =~ s/\s*aesni\-x86\.o// if ($no_sse2);
	}
else	{
	$aes_obj=$aes_enc;
	}
$wp_obj="" if ($wp_obj =~ /mmx/ && $processor eq "386");
if ($wp_obj =~ /\.o$/)
	{
	$cflags.=" -DWHIRLPOOL_ASM";
	}
else	{
	$wp_obj="wp_block.o";
	}
$cmll_obj=$cmll_enc	unless ($cmll_obj =~ /.o$/);

# "Stringify" the C flags string.  This permits it to be made part of a string
# and works as well on command lines.
$cflags =~ s/([\\\"])/\\\1/g;

my $version = "unknown";
my $version_num = "unknown";
my $major = "unknown";
my $minor = "unknown";
my $shlib_version_number = "unknown";
my $shlib_version_history = "unknown";
my $shlib_major = "unknown";
my $shlib_minor = "unknown";

open(IN,'<crypto/opensslv.h') || die "unable to read opensslv.h:$!\n";
while (<IN>)
	{
	$version=$1 if /OPENSSL.VERSION.TEXT.*OpenSSL (\S+) /;
	$version_num=$1 if /OPENSSL.VERSION.NUMBER.*0x(\S+)/;
	$shlib_version_number=$1 if /SHLIB_VERSION_NUMBER *"([^"]+)"/;
	$shlib_version_history=$1 if /SHLIB_VERSION_HISTORY *"([^"]*)"/;
	}
close(IN);
if ($shlib_version_history ne "") { $shlib_version_history .= ":"; }

if ($version =~ /(^[0-9]*)\.([0-9\.]*)/)
	{
	$major=$1;
	$minor=$2;
	}

if ($shlib_version_number =~ /(^[0-9]*)\.([0-9\.]*)/)
	{
	$shlib_major=$1;
	$shlib_minor=$2;
	}

if ($strict_warnings)
	{
	my $wopt;
	die "ERROR --strict-warnings requires gcc" unless ($cc =~ /gcc$/);
	foreach $wopt (split /\s+/, $gcc_devteam_warn)
		{
		$cflags .= " $wopt" unless ($cflags =~ /$wopt/)
		}
	}

open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
unlink("$Makefile.new") || die "unable to remove old $Makefile.new:$!\n" if -e "$Makefile.new";
open(OUT,">$Makefile.new") || die "unable to create $Makefile.new:$!\n";
print OUT "### Generated automatically from Makefile.org by Configure.\n\n";
my $sdirs=0;
while (<IN>)
	{
	chomp;
	$sdirs = 1 if /^SDIRS=/;
	if ($sdirs) {
		my $dir;
		foreach $dir (@skip) {
			s/(\s)$dir /$1/;
			s/\s$dir$//;
			}
		}
	$sdirs = 0 unless /\\$/;
        s/engines // if (/^DIRS=/ && $disabled{"engine"});
	s/ccgost// if (/^ENGDIRS=/ && $disabled{"gost"});
	s/^VERSION=.*/VERSION=$version/;
	s/^MAJOR=.*/MAJOR=$major/;
	s/^MINOR=.*/MINOR=$minor/;
	s/^SHLIB_VERSION_NUMBER=.*/SHLIB_VERSION_NUMBER=$shlib_version_number/;
	s/^SHLIB_VERSION_HISTORY=.*/SHLIB_VERSION_HISTORY=$shlib_version_history/;
	s/^SHLIB_MAJOR=.*/SHLIB_MAJOR=$shlib_major/;
	s/^SHLIB_MINOR=.*/SHLIB_MINOR=$shlib_minor/;
	s/^SHLIB_EXT=.*/SHLIB_EXT=$shared_extension/;
	s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/;
	s/^MULTILIB=.*$/MULTILIB=$multilib/;
	s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
	s/^LIBDIR=.*$/LIBDIR=$libdir/;
	s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
	s/^PLATFORM=.*$/PLATFORM=$target/;
	s/^OPTIONS=.*$/OPTIONS=$options/;
	s/^CONFIGURE_ARGS=.*$/CONFIGURE_ARGS=$argvstring/;
	if ($cross_compile_prefix)
		{
		s/^CC=.*$/CROSS_COMPILE= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE\)$cc/;
		s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/;
		s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/;
		s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/;
		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc eq "gcc";
		}
	else	{
		s/^CC=.*$/CC= $cc/;
		s/^AR=.*/AR= $ar/;
		s/^RANLIB=.*/RANLIB= $ranlib/;
		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc eq "gcc";
		}
	s/^CFLAG=.*$/CFLAG= $cflags/;
	s/^DEPFLAG=.*$/DEPFLAG=$depflags/;
	s/^PEX_LIBS=.*$/PEX_LIBS= $prelflags/;
	s/^EX_LIBS=.*$/EX_LIBS= $lflags/;
	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
	s/^CPUID_OBJ=.*$/CPUID_OBJ= $cpuid_obj/;
	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
	s/^AES_ENC=.*$/AES_ENC= $aes_obj/;
	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
	s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/;
	s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/;
	s/^RC5_ENC=.*$/RC5_ENC= $rc5_obj/;
	s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/;
	s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/;
	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
	s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/;
	s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/;
	s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/;
	s/^PROCESSOR=.*/PROCESSOR= $processor/;
	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
	s/^PERL=.*/PERL= $perl/;
	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
	s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
	s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
	if ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*$/)
		{
		my $sotmp = $1;
		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/;
		}
	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.dylib$/)
		{
		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.dylib/;
		}
	elsif ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/)
		{
		my $sotmp = $1;
		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp.\$(SHLIB_MAJOR) .s$sotmp/;
		}
	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.[^\.]*\.dylib$/)
		{
		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.\$(SHLIB_MAJOR).dylib .dylib/;
		}
	s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$shared_ldflag/;
	print OUT $_."\n";
	}
close(IN);
close(OUT);
rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";

print "CC            =$cc\n";
print "CFLAG         =$cflags\n";
print "EX_LIBS       =$lflags\n";
print "CPUID_OBJ     =$cpuid_obj\n";
print "BN_ASM        =$bn_obj\n";
print "DES_ENC       =$des_obj\n";
print "AES_ENC       =$aes_obj\n";
print "BF_ENC        =$bf_obj\n";
print "CAST_ENC      =$cast_obj\n";
print "RC4_ENC       =$rc4_obj\n";
print "RC5_ENC       =$rc5_obj\n";
print "MD5_OBJ_ASM   =$md5_obj\n";
print "SHA1_OBJ_ASM  =$sha1_obj\n";
print "RMD160_OBJ_ASM=$rmd160_obj\n";
print "CMLL_ENC=     =$cmll_obj\n";
print "PROCESSOR     =$processor\n";
print "RANLIB        =$ranlib\n";
print "ARFLAGS       =$arflags\n";
print "PERL          =$perl\n";
print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
	if $withargs{"krb5-include"} ne "";

my $des_ptr=0;
my $des_risc1=0;
my $des_risc2=0;
my $des_unroll=0;
my $bn_ll=0;
my $def_int=2;
my $rc4_int=$def_int;
my $md2_int=$def_int;
my $idea_int=$def_int;
my $rc2_int=$def_int;
my $rc4_idx=0;
my $rc4_chunk=0;
my $bf_ptr=0;
my @type=("char","short","int","long");
my ($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0);
my $export_var_as_fn=0;

my $des_int;

foreach (sort split(/\s+/,$bn_ops))
	{
	$des_ptr=1 if /DES_PTR/;
	$des_risc1=1 if /DES_RISC1/;
	$des_risc2=1 if /DES_RISC2/;
	$des_unroll=1 if /DES_UNROLL/;
	$des_int=1 if /DES_INT/;
	$bn_ll=1 if /BN_LLONG/;
	$rc4_int=0 if /RC4_CHAR/;
	$rc4_int=3 if /RC4_LONG/;
	$rc4_idx=1 if /RC4_INDEX/;
	$rc4_chunk=1 if /RC4_CHUNK/;
	$rc4_chunk=2 if /RC4_CHUNK_LL/;
	$md2_int=0 if /MD2_CHAR/;
	$md2_int=3 if /MD2_LONG/;
	$idea_int=1 if /IDEA_SHORT/;
	$idea_int=3 if /IDEA_LONG/;
	$rc2_int=1 if /RC2_SHORT/;
	$rc2_int=3 if /RC2_LONG/;
	$bf_ptr=1 if $_ eq "BF_PTR";
	$bf_ptr=2 if $_ eq "BF_PTR2";
	($b64l,$b64,$b32,$b16,$b8)=(0,1,0,0,0) if /SIXTY_FOUR_BIT/;
	($b64l,$b64,$b32,$b16,$b8)=(1,0,0,0,0) if /SIXTY_FOUR_BIT_LONG/;
	($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0) if /THIRTY_TWO_BIT/;
	($b64l,$b64,$b32,$b16,$b8)=(0,0,0,1,0) if /SIXTEEN_BIT/;
	($b64l,$b64,$b32,$b16,$b8)=(0,0,0,0,1) if /EIGHT_BIT/;
	$export_var_as_fn=1 if /EXPORT_VAR_AS_FN/;
	}

open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n";
unlink("crypto/opensslconf.h.new") || die "unable to remove old crypto/opensslconf.h.new:$!\n" if -e "crypto/opensslconf.h.new";
open(OUT,'>crypto/opensslconf.h.new') || die "unable to create crypto/opensslconf.h.new:$!\n";
print OUT "/* opensslconf.h */\n";
print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n";

print OUT "/* OpenSSL was configured with the following options: */\n";
my $openssl_algorithm_defines_trans = $openssl_algorithm_defines;
$openssl_experimental_defines =~ s/^\s*#\s*define\s+OPENSSL_NO_(.*)/#ifndef OPENSSL_EXPERIMENTAL_$1\n# ifndef OPENSSL_NO_$1\n#  define OPENSSL_NO_$1\n# endif\n#endif/mg;
$openssl_algorithm_defines_trans =~ s/^\s*#\s*define\s+OPENSSL_(.*)/# if defined(OPENSSL_$1) \&\& !defined($1)\n#  define $1\n# endif/mg;
$openssl_algorithm_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
$openssl_algorithm_defines = "   /* no ciphers excluded */\n" if $openssl_algorithm_defines eq "";
$openssl_thread_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
$openssl_sys_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
$openssl_other_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
print OUT $openssl_sys_defines;
print OUT "#ifndef OPENSSL_DOING_MAKEDEPEND\n\n";
print OUT $openssl_experimental_defines;
print OUT "\n";
print OUT $openssl_algorithm_defines;
print OUT "\n#endif /* OPENSSL_DOING_MAKEDEPEND */\n\n";
print OUT $openssl_thread_defines;
print OUT $openssl_other_defines,"\n";

print OUT "/* The OPENSSL_NO_* macros are also defined as NO_* if the application\n";
print OUT "   asks for it.  This is a transient feature that is provided for those\n";
print OUT "   who haven't had the time to do the appropriate changes in their\n";
print OUT "   applications.  */\n";
print OUT "#ifdef OPENSSL_ALGORITHM_DEFINES\n";
print OUT $openssl_algorithm_defines_trans;
print OUT "#endif\n\n";

print OUT "#define OPENSSL_CPUID_OBJ\n\n" if ($cpuid_obj ne "mem_clr.o");

while (<IN>)
	{
	if	(/^#define\s+OPENSSLDIR/)
		{
		my $foo = $openssldir;
		$foo =~ s/\\/\\\\/g;
		print OUT "#define OPENSSLDIR \"$foo\"\n";
		}
	elsif	(/^#define\s+ENGINESDIR/)
		{
		# $foo is to become "$prefix/lib$multilib/engines";
		# as Makefile.org and engines/Makefile are adapted for
		# $multilib suffix.
		my $foo = "$prefix/lib/engines";
		$foo =~ s/\\/\\\\/g;
		print OUT "#define ENGINESDIR \"$foo\"\n";
		}
	elsif	(/^#((define)|(undef))\s+OPENSSL_EXPORT_VAR_AS_FUNCTION/)
		{ printf OUT "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION\n"
			if $export_var_as_fn;
		  printf OUT "#%s OPENSSL_EXPORT_VAR_AS_FUNCTION\n",
			($export_var_as_fn)?"define":"undef"; }
	elsif	(/^#define\s+OPENSSL_UNISTD/)
		{
		$unistd = "<unistd.h>" if $unistd eq "";
		print OUT "#define OPENSSL_UNISTD $unistd\n";
		}
	elsif	(/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/)
		{ printf OUT "#%s SIXTY_FOUR_BIT_LONG\n",($b64l)?"define":"undef"; }
	elsif	(/^#((define)|(undef))\s+SIXTY_FOUR_BIT/)
		{ printf OUT "#%s SIXTY_FOUR_BIT\n",($b64)?"define":"undef"; }
	elsif	(/^#((define)|(undef))\s+THIRTY_TWO_BIT/)
		{ printf OUT "#%s THIRTY_TWO_BIT\n",($b32)?"define":"undef"; }
	elsif	(/^#((define)|(undef))\s+SIXTEEN_BIT/)
		{ printf OUT "#%s SIXTEEN_BIT\n",($b16)?"define":"undef"; }
	elsif	(/^#((define)|(undef))\s+EIGHT_BIT/)
		{ printf OUT "#%s EIGHT_BIT\n",($b8)?"define":"undef"; }
	elsif	(/^#((define)|(undef))\s+BN_LLONG\s*$/)
		{ printf OUT "#%s BN_LLONG\n",($bn_ll)?"define":"undef"; }
	elsif	(/^\#define\s+DES_LONG\s+.*/)
		{ printf OUT "#define DES_LONG unsigned %s\n",
			($des_int)?'int':'long'; }
	elsif	(/^\#(define|undef)\s+DES_PTR/)
		{ printf OUT "#%s DES_PTR\n",($des_ptr)?'define':'undef'; }
	elsif	(/^\#(define|undef)\s+DES_RISC1/)
		{ printf OUT "#%s DES_RISC1\n",($des_risc1)?'define':'undef'; }
	elsif	(/^\#(define|undef)\s+DES_RISC2/)
		{ printf OUT "#%s DES_RISC2\n",($des_risc2)?'define':'undef'; }
	elsif	(/^\#(define|undef)\s+DES_UNROLL/)
		{ printf OUT "#%s DES_UNROLL\n",($des_unroll)?'define':'undef'; }
	elsif	(/^#define\s+RC4_INT\s/)
		{ printf OUT "#define RC4_INT unsigned %s\n",$type[$rc4_int]; }
	elsif	(/^#undef\s+RC4_CHUNK/)
		{
		printf OUT "#undef RC4_CHUNK\n" if $rc4_chunk==0;
		printf OUT "#define RC4_CHUNK unsigned long\n" if $rc4_chunk==1;
		printf OUT "#define RC4_CHUNK unsigned long long\n" if $rc4_chunk==2;
		}
	elsif	(/^#((define)|(undef))\s+RC4_INDEX/)
		{ printf OUT "#%s RC4_INDEX\n",($rc4_idx)?"define":"undef"; }
	elsif (/^#(define|undef)\s+I386_ONLY/)
		{ printf OUT "#%s I386_ONLY\n", ($processor eq "386")?
			"define":"undef"; }
	elsif	(/^#define\s+MD2_INT\s/)
		{ printf OUT "#define MD2_INT unsigned %s\n",$type[$md2_int]; }
	elsif	(/^#define\s+IDEA_INT\s/)
		{printf OUT "#define IDEA_INT unsigned %s\n",$type[$idea_int];}
	elsif	(/^#define\s+RC2_INT\s/)
		{printf OUT "#define RC2_INT unsigned %s\n",$type[$rc2_int];}
	elsif (/^#(define|undef)\s+BF_PTR/)
		{
		printf OUT "#undef BF_PTR\n" if $bf_ptr == 0;
		printf OUT "#define BF_PTR\n" if $bf_ptr == 1;
		printf OUT "#define BF_PTR2\n" if $bf_ptr == 2;
	        }
	else
		{ print OUT $_; }
	}
close(IN);
close(OUT);
rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";


# Fix the date

print "SIXTY_FOUR_BIT_LONG mode\n" if $b64l;
print "SIXTY_FOUR_BIT mode\n" if $b64;
print "THIRTY_TWO_BIT mode\n" if $b32;
print "SIXTEEN_BIT mode\n" if $b16;
print "EIGHT_BIT mode\n" if $b8;
print "DES_PTR used\n" if $des_ptr;
print "DES_RISC1 used\n" if $des_risc1;
print "DES_RISC2 used\n" if $des_risc2;
print "DES_UNROLL used\n" if $des_unroll;
print "DES_INT used\n" if $des_int;
print "BN_LLONG mode\n" if $bn_ll;
print "RC4 uses u$type[$rc4_int]\n" if $rc4_int != $def_int;
print "RC4_INDEX mode\n" if $rc4_idx;
print "RC4_CHUNK is undefined\n" if $rc4_chunk==0;
print "RC4_CHUNK is unsigned long\n" if $rc4_chunk==1;
print "RC4_CHUNK is unsigned long long\n" if $rc4_chunk==2;
print "MD2 uses u$type[$md2_int]\n" if $md2_int != $def_int;
print "IDEA uses u$type[$idea_int]\n" if $idea_int != $def_int;
print "RC2 uses u$type[$rc2_int]\n" if $rc2_int != $def_int;
print "BF_PTR used\n" if $bf_ptr == 1; 
print "BF_PTR2 used\n" if $bf_ptr == 2; 

if($IsMK1MF) {
	open (OUT,">crypto/buildinf.h") || die "Can't open buildinf.h";
	printf OUT <<EOF;
#ifndef MK1MF_BUILD
  /* auto-generated by Configure for crypto/cversion.c:
   * for Unix builds, crypto/Makefile.ssl generates functional definitions;
   * Windows builds (and other mk1mf builds) compile cversion.c with
   * -DMK1MF_BUILD and use definitions added to this file by util/mk1mf.pl. */
  #error "Windows builds (PLATFORM=$target) use mk1mf.pl-created Makefiles"
#endif
EOF
	close(OUT);
} else {
	my $make_command = "$make PERL=\'$perl\'";
	my $make_targets = "";
	$make_targets .= " links" if $symlink;
	$make_targets .= " depend" if $depflags ne $default_depflags && $make_depend;
	$make_targets .= " gentests" if $symlink;
	(system $make_command.$make_targets) == 0 or exit $?
		if $make_targets ne "";
	if ( $perl =~ m@^/@) {
	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
	    &dofile("apps/CA.pl",$perl,'^#!/', '#!%s');
	} else {
	    # No path for Perl known ...
	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
	}
	if ($depflags ne $default_depflags && !$make_depend) {
		print <<EOF;

Since you've disabled or enabled at least one algorithm, you need to do
the following before building:

	make depend
EOF
	}
}

# create the ms/version32.rc file if needed
if ($IsMK1MF && ($target !~ /^netware/)) {
	my ($v1, $v2, $v3, $v4);
	if ($version_num =~ /(^[0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})/i) {
		$v1=hex $1;
		$v2=hex $2;
		$v3=hex $3;
		$v4=hex $4;
	}
	open (OUT,">ms/version32.rc") || die "Can't open ms/version32.rc";
	print OUT <<EOF;
#include <winver.h>

LANGUAGE 0x09,0x01

1 VERSIONINFO
  FILEVERSION $v1,$v2,$v3,$v4
  PRODUCTVERSION $v1,$v2,$v3,$v4
  FILEFLAGSMASK 0x3fL
#ifdef _DEBUG
  FILEFLAGS 0x01L
#else
  FILEFLAGS 0x00L
#endif
  FILEOS VOS__WINDOWS32
  FILETYPE VFT_DLL
  FILESUBTYPE 0x0L
BEGIN
    BLOCK "StringFileInfo"
    BEGIN
	BLOCK "040904b0"
	BEGIN
	    // Required:	    
	    VALUE "CompanyName", "The OpenSSL Project, http://www.openssl.org/\\0"
	    VALUE "FileDescription", "OpenSSL Shared Library\\0"
	    VALUE "FileVersion", "$version\\0"
#if defined(CRYPTO)
	    VALUE "InternalName", "libeay32\\0"
	    VALUE "OriginalFilename", "libeay32.dll\\0"
#elif defined(SSL)
	    VALUE "InternalName", "ssleay32\\0"
	    VALUE "OriginalFilename", "ssleay32.dll\\0"
#endif
	    VALUE "ProductName", "The OpenSSL Toolkit\\0"
	    VALUE "ProductVersion", "$version\\0"
	    // Optional:
	    //VALUE "Comments", "\\0"
	    VALUE "LegalCopyright", "Copyright  1998-2005 The OpenSSL Project. Copyright  1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
	    //VALUE "LegalTrademarks", "\\0"
	    //VALUE "PrivateBuild", "\\0"
	    //VALUE "SpecialBuild", "\\0"
	END
    END
    BLOCK "VarFileInfo"
    BEGIN
        VALUE "Translation", 0x409, 0x4b0
    END
END
EOF
	close(OUT);
  }
  
print <<EOF;

Configured for $target.
EOF

print <<\EOF if (!$no_threads && !$threads);

The library could not be configured for supporting multi-threaded
applications as the compiler options required on this system are not known.
See file INSTALL for details if you need multi-threading.
EOF

print <<\EOF if ($no_shared_warn);

You gave the option 'shared'.  Normally, that would give you shared libraries.
Unfortunately, the OpenSSL configuration doesn't include shared library support
for this platform yet, so it will pretend you gave the option 'no-shared'.  If
you can inform the developpers (openssl-dev\@openssl.org) how to support shared
libraries on this platform, they will at least look at it and try their best
(but please first make sure you have tried with a current version of OpenSSL).
EOF

exit(0);

sub usage
	{
	print STDERR $usage;
	print STDERR "\npick os/compiler from:\n";
	my $j=0;
	my $i;
        my $k=0;
	foreach $i (sort keys %table)
		{
		next if $i =~ /^debug/;
		$k += length($i) + 1;
		if ($k > 78)
			{
			print STDERR "\n";
			$k=length($i);
			}
		print STDERR $i . " ";
		}
	foreach $i (sort keys %table)
		{
		next if $i !~ /^debug/;
		$k += length($i) + 1;
		if ($k > 78)
			{
			print STDERR "\n";
			$k=length($i);
			}
		print STDERR $i . " ";
		}
	print STDERR "\n\nNOTE: If in doubt, on Unix-ish systems use './config'.\n";
	exit(1);
	}

sub which
	{
	my($name)=@_;
	my $path;
	foreach $path (split /:/, $ENV{PATH})
		{
		if (-f "$path/$name$exe_ext" and -x _)
			{
			return "$path/$name$exe_ext" unless ($name eq "perl" and
			 system("$path/$name$exe_ext -e " . '\'exit($]<5.0);\''));
			}
		}
	}

sub dofile
	{
	my $f; my $p; my %m; my @a; my $k; my $ff;
	($f,$p,%m)=@_;

	open(IN,"<$f.in") || open(IN,"<$f") || die "unable to open $f:$!\n";
	@a=<IN>;
	close(IN);
	foreach $k (keys %m)
		{
		grep(/$k/ && ($_=sprintf($m{$k}."\n",$p)),@a);
		}
	open(OUT,">$f.new") || die "unable to open $f.new:$!\n";
	print OUT @a;
	close(OUT);
	rename($f,"$f.bak") || die "unable to rename $f\n" if -e $f;
	rename("$f.new",$f) || die "unable to rename $f.new\n";
	}

sub print_table_entry
	{
	my $target = shift;

	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
	my $bn_ops,my $cpuid_obj,my $bn_obj,my $des_obj,my $aes_obj, my $bf_obj,
	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
	my $rc5_obj,my $wp_obj,my $cmll_obj,my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags,my $multilib)=
	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
			
	print <<EOF

*** $target
\$cc           = $cc
\$cflags       = $cflags
\$unistd       = $unistd
\$thread_cflag = $thread_cflag
\$sys_id       = $sys_id
\$lflags       = $lflags
\$bn_ops       = $bn_ops
\$cpuid_obj    = $cpuid_obj
\$bn_obj       = $bn_obj
\$des_obj      = $des_obj
\$aes_obj      = $aes_obj
\$bf_obj       = $bf_obj
\$md5_obj      = $md5_obj
\$sha1_obj     = $sha1_obj
\$cast_obj     = $cast_obj
\$rc4_obj      = $rc4_obj
\$rmd160_obj   = $rmd160_obj
\$rc5_obj      = $rc5_obj
\$wp_obj       = $wp_obj
\$cmll_obj     = $cmll_obj
\$perlasm_scheme = $perlasm_scheme