Newer
Older
Ralf S. Engelschall
committed
_______________
Changes between 0.9.6 and 0.9.7 [xx XXX 2001]
OpenSSL 0.9.6a/0.9.6b (bugfix releases, 5 Apr 2001 and 9 July 2001)
and OpenSSL 0.9.7 were developped in parallel, based on OpenSSL 0.9.6.
Change log entries are tagged as follows:
-) applies to 0.9.6a/0.9.6b/0.9.6c only
*) applies to 0.9.6a/0.9.6b/0.9.6c and 0.9.7
+) applies to 0.9.7 only
*) In crypto/dh/dh_key.c, change generate_key() (the default
implementation of DH_generate_key()) so that a new key is
generated each time DH_generate_key() is used on a DH object.
Previously, DH_generate_key() did not change existing keys
-- but ssl/s3_srvr.c always expected it to do so (in effect,
SSL_OP_SINGLE_DH_USE was ignored in servers reusing the same SSL
object for multiple connections; however, each new SSL object
created from an SSL_CTX got its own key).
[Bodo Moeller]
*) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
dh->length and always used
BN_rand_range(priv_key, dh->p).
BN_rand_range() is not necessary for Diffie-Hellman, and this
specific range makes Diffie-Hellman unnecessarily inefficient if
dh->length (recommended exponent length) is much smaller than the
length of dh->p. We could use BN_rand_range() if the order of
the subgroup was stored in the DH structure, but we only have
dh->length.
So switch back to
BN_rand(priv_key, l, ...)
where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
otherwise.
[Bodo Moeller]
*) In
RSA_eay_public_encrypt
RSA_eay_private_decrypt
RSA_eay_private_encrypt (signing)
RSA_eay_public_decrypt (signature verification)
(default implementations for RSA_public_encrypt,
RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
always reject numbers >= n.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
to synchronize access to 'locking_thread'. This is necessary on
systems where access to 'locking_thread' (an 'unsigned long'
variable) is not atomic.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
*before* setting the 'crypto_lock_rand' flag. The previous code had
a race condition if 0 is a valid thread ID.
[Travis Vitek <vitek@roguewave.com>]
+) Cleanup of EVP macros.
[Ben Laurie]
+) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
correct _ecb suffix.
[Ben Laurie]
+) Add initial OCSP responder support to ocsp application. The
revocation information is handled using the text based index
use by the ca application. The responder can either handle
requests generated internally, supplied in files (for example
via a CGI script) or using an internal minimal server.
[Steve Henson]
+) Add configuration choices to get zlib compression for TLS.
[Richard Levitte]
+) Changes to Kerberos SSL for RFC 2712 compliance:
1. Implemented real KerberosWrapper, instead of just using
KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2. Implemented optional authenticator field of KerberosWrapper.
Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
and authenticator structs; see crypto/krb5/.
Generalized Kerberos calls to support multiple Kerberos libraries.
[Vern Staats <staatsvr@asc.hpc.mil>,
Jeffrey Altman <jaltman@columbia.edu>
via Richard Levitte]
+) Cause 'openssl speed' to use fully hard-coded DSA keys as it
already does with RSA. testdsa.h now has 'priv_key/pub_key'
values for each of the key sizes rather than having just
parameters (and 'speed' generating keys each time).
[Geoff Thorpe]
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
-) OpenSSL 0.9.6b released [9 July 2001]
*) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
PRNG state recovery was possible based on the output of
one PRNG request appropriately sized to gain knowledge on
'md' followed by enough consecutive 1-byte PRNG requests
to traverse all of 'state'.
1. When updating 'md_local' (the current thread's copy of 'md')
during PRNG output generation, hash all of the previous
'md_local' value, not just the half used for PRNG output.
2. Make the number of bytes from 'state' included into the hash
independent from the number of PRNG bytes requested.
The first measure alone would be sufficient to avoid
Markku-Juhani's attack. (Actually it had never occurred
to me that the half of 'md_local' used for chaining was the
half from which PRNG output bytes were taken -- I had always
assumed that the secret half would be used.) The second
measure makes sure that additional data from 'state' is never
mixed into 'md_local' in small portions; this heuristically
further strengthens the PRNG.
[Bodo Moeller]
+) Speed up EVP routines.
Before:
encrypt
type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
decrypt
des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
After:
encrypt
des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
*) Fix crypto/bn/asm/mips3.s.
[Andy Polyakov]
*) When only the key is given to "enc", the IV is undefined. Print out
an error message in this case.
[Lutz Jaenicke]
+) Added the OS2-EMX target.
["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
+) Rewrite apps to use NCONF routines instead of the old CONF. New functions
to support NCONF routines in extension code. New function CONF_set_nconf()
to allow functions which take an NCONF to also handle the old LHASH
structure: this means that the old CONF compatible routines can be
retained (in particular wrt extensions) without having to duplicate the
code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
[Steve Henson]
*) Handle special case when X509_NAME is empty in X509 printing routines.
[Steve Henson]
*) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
positive and less than q.
[Bodo Moeller]
+) Enhance the general user interface with mechanisms for inner control
and with pssibilities to have yes/no kind of prompts.
[Richard Levitte]
+) Change all calls to low level digest routines in the library and
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
[Verdon Walker <VWalker@novell.com>, Steve Henson]
+) Add the possibility to control engines through control names but with
arbitrary arguments instead of just a string.
Change the key loaders to take a UI_METHOD instead of a callback
function pointer. NOTE: this breaks binary compatibility with earlier
versions of OpenSSL [engine].
Addapt the nCipher code for these new conditions and add a card insertion
callback.
[Richard Levitte]
+) Enhance the general user interface with mechanisms to better support
dialog box interfaces, application-defined prompts, the possibility
to use defaults (for example default passwords from somewhere else)
and interrupts/cancelations.
[Richard Levitte]
*) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
used: it isn't thread safe and the add_lock_callback should handle
Loading full blame...