- 05 Feb, 2007 2 commits
-
-
Daniel Stenberg authored
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the timeouts with millisecond resolution instead. The only restriction to that is the alarm() (sometimes) used to abort name resolves as that uses full seconds. I fixed the FTP response timeout part of the patch. Internally we now count and keep the timeouts in milliseconds but it also means we multiply set timeouts with 1000. The effect of this is that no timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which equals 24.86 days. We probably couldn't before either since the code did *1000 on the timeout values on several places already.
-
Yang Tse authored
-
- 03 Feb, 2007 1 commit
-
-
Daniel Stenberg authored
fail since they used "1 feb 2007"... - Manfred Schwarb reported that socks5 support was broken and help us pinpoint the problem. The code now tries harder to use httproxy and proxy where apppropriate, as not all proxies are HTTP...
-
- 02 Feb, 2007 1 commit
-
-
Yang Tse authored
-
- 30 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
-
- 29 Jan, 2007 2 commits
-
-
Daniel Stenberg authored
-
Daniel Stenberg authored
header, you got _two_ User-Agent headers in the CONNECT request...! Added test case 287 to verify the fix.
-
- 28 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
-
- 25 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
ordinary curl command line, and you will get a libcurl-using source code written to the file that does the equivalent operation of what your command line operation does!
-
- 23 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
-
- 16 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
doing an FTP transfer is removed from a multi handle before completion. The fix also fixed the "alive counter" to be correct on "premature removal" for all protocols.
-
- 14 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
non-ASCII platforms. It does add some complexity, most notably with more #ifdefs, but I want to see this supported added and I can't see how we can add it without the extra stuff added.
-
- 13 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
-
- 05 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it will make libcurl shutdown SSL/TLS after the authentication is done on a FTP-SSL operation.
-
- 03 Jan, 2007 2 commits
-
-
Daniel Stenberg authored
non-ASCII platforms.
-
Daniel Stenberg authored
downloaded data in two buffers, just to be able to deal with a special HTTP pipelining case. That is now only activated for pipelined transfers. In Matt's case, it showed as a considerable performance difference,
-
- 02 Jan, 2007 1 commit
-
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1603712) (known bug #36) --limit-rate (CURLOPT_MAX_SEND_SPEED_LARGE and CURLOPT_MAX_RECV_SPEED_LARGE) are broken on Windows (since 7.16.0, but that's when they were introduced as previous to that the limiting logic was made in the application only and not in the library). It was actually also broken on select()-based systems (as apposed to poll()) but we haven't had any such reports. We now use select(), Sleep() or delay() properly to sleep a while without waiting for anything input or output when the rate limiting is activated with the easy interface.
-
- 29 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
-
- 25 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
-
- 22 Dec, 2006 2 commits
-
-
Daniel Stenberg authored
get confused and not acknowledge the 'no_proxy' variable properly once it had used the proxy and you re-used the same easy handle. I made sure the proxy name is properly stored in the connect struct rather than the sessionhandle/easy struct.
-
Daniel Stenberg authored
'curl [URL]' with a URL without a protocol prefix, curl would not send a correct request as it failed to add the protocol prefix.
-
- 21 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1618359) and subsequently provided a patch for it: when downloading 2 zero byte files in a row, curl 7.16.0 enters an infinite loop, while curl 7.16.1-20061218 does one additional unnecessary request. Fix: During the "Major overhaul introducing http pipelining support and shared connection cache within the multi handle." change, headerbytecount was moved to live in the Curl_transfer_keeper structure. But that structure is reset in the Transfer method, losing the information that we had about the header size. This patch moves it back to the connectdata struct.
-
- 16 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
during certain conditions when GnuTLS is used.
-
- 11 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
something went wrong like it got a bad response code back from the server, libcurl would leak memory. Added test case 538 to verify the fix. I also noted that the connection would get cached in that case, which doesn't make sense since it cannot be re-use when the authentication has failed. I fixed that issue too at the same time, and also that the path would be "remembered" in vain for cases where the connection was about to get closed.
-
- 06 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1603712) which is about connections getting cut off prematurely when --limit-rate is used. While I found no such problems in my tests nor in my reading of the code, I found that the --limit-rate code was severly flawed (since it was moved into the lib, since 7.15.5) when used with the easy interface and it didn't work as documented so I reworked it somewhat and now it works for my tests.
-
- 05 Dec, 2006 8 commits
-
-
Daniel Stenberg authored
passing a curl_off_t argument to the Curl_read_rewind() function which takes an size_t argument. Curl_read_rewind() also had debug code left in it and it was put in a different source file with no good reason when only used from one single spot.
-
Daniel Stenberg authored
no code present in the library that receives the option. Since it was not possible to use, we know that no current users exist and thus we simply removed it from the docs and made the code always use the default path of the code.
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1604956) which identified setting CURLOPT_MAXCONNECTS to zero caused libcurl to SIGSEGV. Starting now, libcurl will always internally use no less than 1 entry in the connection cache.
-
Daniel Stenberg authored
Curl_done()
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1230118) curl_getdate() did not work properly for all input dates on Windows. It was mostly seen on some TZ time zones using DST. Luckily, Martin also provided a fix.
-
Daniel Stenberg authored
(http://curl.haxx.se/bug/view.cgi?id=1600447) in which he noted that active FTP connections don't work with the multi interface. The problem is here that the multi interface state machine has a state during which it can wait for the data connection to connect, but the active connection is not done in the same step in the sequence as the passive one is so it doesn't quite work for active. The active FTP code still use a blocking function to allow the remote server to connect. The fix (work-around is a better word) for this problem is to set the boolean prematurely that the data connection is completed, so that the "wait for connect" phase ends at once.
-
Daniel Stenberg authored
HTTP upload was disconnected: "What appears to be happening is that my system (Linux 2.6.17 and 2.6.13) is setting *only* POLLHUP on poll() when the conditions in my previous mail occur. As you can see, select.c:Curl_select() does not check for POLLHUP. So basically what was happening, is poll() was returning immediately (with POLLHUP set), but when Curl_select() looked at the bits, neither POLLERR or POLLOUT was set. This still caused Curl_readwrite() to be called, which quickly returned. Then the transfer() loop kept continuing at full speed forever."
-
Daniel Stenberg authored
-
- 01 Dec, 2006 1 commit
-
-
Daniel Stenberg authored
header in a third, not suppported by libcurl, format and we agreed that we could make the parser more forgiving to accept all the three found variations.
-
- 25 Nov, 2006 1 commit
-
-
Daniel Stenberg authored
responded with a single status line and no headers nor body. Starting now, a HTTP response on a persistent connection (i.e not set to be closed after the response has been taken care of) must have Content-Length or chunked encoding set, or libcurl will simply assume that there is no body. To my horror I learned that we had no less than 57(!) test cases that did bad HTTP responses like this, and even the test http server (sws) responded badly when queried by the test system if it is the test system. So although the actual fix for the problem was tiny, going through all the newly failing test cases got really painful and boring.
-
- 24 Nov, 2006 1 commit
-
-
Daniel Stenberg authored
-
- 21 Nov, 2006 1 commit
-
-
Daniel Stenberg authored
-
- 18 Nov, 2006 1 commit
-
-
Daniel Stenberg authored
-
- 13 Nov, 2006 1 commit
-
-
http://curl.haxx.se/bug/view.cgi?id=1595348Daniel Stenberg authored
out a stack overwrite (and the corresponding fix) on 64bit Windows when dealing with HTTP chunked encoding.
-
- 09 Nov, 2006 1 commit
-
-
Daniel Stenberg authored
Versions, not to ./Versions and indentation improvments
-