- 11 Feb, 2009 1 commit
-
-
Daniel Stenberg authored
the condition in the previous request was unmet. This is typically a time condition set with CURLOPT_TIMECONDITION and was previously not possible to reliably figure out. From bug report #2565128 (http://curl.haxx.se/bug/view.cgi?id=2565128)
-
- 10 Feb, 2009 1 commit
-
-
Daniel Stenberg authored
-
- 02 Feb, 2009 1 commit
-
-
Daniel Stenberg authored
version 1.1 instead of 1.0 like before. This change also introduces the new proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0 option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0. I updated all test cases cases that use CONNECT and I tried to do some using --proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
-
- 28 Jan, 2009 1 commit
-
-
Daniel Stenberg authored
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl to do GSS-style authentication with SOCKS5 proxies. The curl tool got the options called --socks5-gssapi-service and --socks5-gssapi-nec to enable these.
-
- 26 Jan, 2009 1 commit
-
-
Daniel Stenberg authored
to set desired block size to use for TFTP transfers instead of the default 512 bytes.
-
- 25 Jan, 2009 1 commit
-
-
Daniel Stenberg authored
They basically offer the same thing the NO_PROXY environment variable only offered previously: list a set of host names that shall not use the proxy even if one is specified.
-
- 10 Dec, 2008 1 commit
-
-
Daniel Stenberg authored
there are servers "out there" that relies on the client doing this broken Digest authentication. Apache even comes with an option to work with such broken clients. The difference is only for URLs that contain a query-part (a '?'-letter and text to the right of it). libcurl now supports this quirk, and you enable it by setting the CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH options. They are thus individually controlled to server and proxy.
-
- 17 Oct, 2008 1 commit
-
-
Yang Tse authored
-
- 16 Oct, 2008 1 commit
-
-
Daniel Stenberg authored
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding these new options is that they have no problems with the colon separator that the CURLOPT_PROXYUSERPWD option does.
-
- 09 Oct, 2008 1 commit
-
-
Yang Tse authored
-
- 08 Oct, 2008 1 commit
-
-
Daniel Stenberg authored
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of deprecates the good old CURLOPT_USERPWD since they allow applications to set the user name and password independently and perhaps more importantly allow both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
-
- 05 Sep, 2008 2 commits
-
-
Daniel Stenberg authored
CURLOPT_POST301 (but adds a define for backwards compatibility for you who don't define CURL_NO_OLDIES). This option allows you to now also change the libcurl behavior for a HTTP response 302 after a POST to not use GET in the subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the patch somewhat before commit. The curl tool got a matching --post302 option. Test case 1076 was added to verify this.
-
Daniel Stenberg authored
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS or FTPS), libcurl will gather lots of server certificate info and that info can then get extracted by a client after the request has completed with curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing helped me test and smoothen out this feature. Unfortunately, this feature currently only works with libcurl built to use OpenSSL. This feature was sponsored by networking4all.com - thanks!
-
- 17 Aug, 2008 1 commit
-
-
Gisle Vanem authored
-
- 13 Aug, 2008 1 commit
-
-
Gisle Vanem authored
-
- 12 Aug, 2008 1 commit
-
-
Yang Tse authored
constants CURL_OFF_T_C and CURL_OFF_TU_C. The clever double helper macro used internally to provide its functionality is thanks to Lars Nilsson.
-
- 07 Aug, 2008 1 commit
-
-
Yang Tse authored
to have a curl_off_t data type no longer gated to off_t.
-
- 30 Jul, 2008 1 commit
-
-
Daniel Stenberg authored
parser to allow numerical IPv6-addresses to be specified with the scope given, as per RFC4007 - with a percent letter that itself needs to be URL escaped. For example, for an address of fe80::1234%1 the HTTP URL is: "http://[fe80::1234%251]/"
-
- 03 Jul, 2008 1 commit
-
-
Daniel Stenberg authored
CURLINFO_APPCONNECT_TIME. This is set with the "application layer" handshake/connection is completed (typically SSL, TLS or SSH). By using this you can figure out the application layer's own connect time. You can extract the time stamp using curl's -w option and the new variable named 'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
-
- 02 Jul, 2008 1 commit
-
-
Dan Fandrich authored
-
- 01 Jul, 2008 1 commit
-
-
Daniel Stenberg authored
operating system.
-
- 08 Jun, 2008 1 commit
-
-
Daniel Stenberg authored
-
- 06 Jun, 2008 3 commits
-
-
Daniel Stenberg authored
OpenSSL, NSS and GnuTLS-built libcurls.
-
Daniel Stenberg authored
OpenSSL, NSS and GnuTLS-built libcurls.
-
Daniel Stenberg authored
curl_easy_getinfo. It returns a pointer to a string with the most recently used IP address. Modified test case 500 to also verify this feature. The implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
-
- 03 Jun, 2008 1 commit
-
-
Dan Fandrich authored
-
- 20 May, 2008 1 commit
-
-
Patrick Monnerat authored
_ Updated packages/OS400/curl.inc.in with new definitions. _ New connect/bind/sendto/recvfrom wrappers to support AF_UNIX sockets. _ Include files line length shortened below 100 chars. _ Const parameter in lib/qssl.[ch]. _ Typos in packages/OS400/initscript.sh.
-
- 12 May, 2008 1 commit
-
-
Daniel Stenberg authored
and receive data over a connection previously setup with curl_easy_perform() and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to show how they can be used.
-
- 30 Apr, 2008 1 commit
-
-
Daniel Stenberg authored
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now introduce the new CURLINFO_REDIRECT_URL option that lets applications extract the URL libcurl would've redirected to if it had been told to. This then enables the application to continue to that URL as it thinks is suitable, without having to re-implement the magic of creating the new URL from the Location: header etc. Test 1029 verifies it.
-
- 22 Apr, 2008 1 commit
-
-
Dan Fandrich authored
-
- 17 Apr, 2008 1 commit
-
-
Dan Fandrich authored
-
- 14 Apr, 2008 1 commit
-
-
Michal Marek authored
discussed in http://curl.haxx.se/mail/lib-2008-04/0291.html
-
- 31 Mar, 2008 1 commit
-
-
Daniel Stenberg authored
application to provide data for a multipart with the read callback. Note that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the stream option is used. This feature is verified by the new test case 554. This feature was sponsored by Xponaut.
-
- 18 Mar, 2008 1 commit
-
-
Michal Marek authored
- Added macros for curl_share_setopt and curl_multi_setopt to check at least the correct number of arguments.
-
- 11 Mar, 2008 2 commits
-
-
Daniel Stenberg authored
does nothing with them, just to make sure libcurl users always use three arguments to this function. Due to its use of ... for the third argument, it is otherwise hard to detect abuse.
-
Michal Marek authored
works in C mode atm (http://curl.haxx.se/mail/lib-2008-02/0267.html , http://curl.haxx.se/mail/lib-2008-02/0292.html )
-
- 10 Jan, 2008 1 commit
-
-
Daniel Stenberg authored
libcurl to seek in a given input stream. This is particularly important when doing upload resumes when there's already a huge part of the file present remotely. Before, and still if this callback isn't used, libcurl will read and through away the entire file up to the point to where the resuming begins (which of course can be a slow opereration depending on file size, I/O bandwidth and more). This new function will also be preferred to get used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when doing multi-stage HTTP auth with POST/PUT.
-
- 08 Jan, 2008 1 commit
-
-
Daniel Stenberg authored
and the write callbacks that now can make a connection's reading and/or writing get paused.
-
- 05 Jan, 2008 1 commit
-
-
Daniel Stenberg authored
code to instead introduce support for a new proxy type called CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy instead of IP address and there's thus no longer any need for a new curl_easy_setopt() option. The default SOCKS5 proxy is again back to sending the IP address to the proxy. The new curl command line option for enabling sending host name to a SOCKS5 proxy is now --socks5-hostname.
-
- 04 Jan, 2008 1 commit
-
-
Daniel Stenberg authored
proxy do the host name resolving and only if --socks5ip (or CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and pass on the IP address only to the proxy.
-