Loading docs/libcurl/curl_easy_getinfo.3 +17 −60 Original line number Diff line number Diff line Loading @@ -42,82 +42,39 @@ explicitly mentioned below. .SH AVAILABLE INFORMATION The following information can be extracted: .IP CURLINFO_EFFECTIVE_URL Pass a pointer to a char pointer to receive the last used effective URL. See \fICURLINFO_EFFECTIVE_URL(3)\fP .IP CURLINFO_RESPONSE_CODE Pass a pointer to a long to receive the last received HTTP, FTP or SMTP response code. This option was previously known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier. The value will be zero if no server response code has been received. Note that a proxy's CONNECT response should be read with \fICURLINFO_HTTP_CONNECTCODE\fP and not this. Support for SMTP responses added in 7.25.0. See \fICURLINFO_RESPONSE_CODE(3)\fP .IP CURLINFO_HTTP_CONNECTCODE Pass a pointer to a long to receive the last received proxy response code to a CONNECT request. See \fICURLINFO_HTTP_CONNECTCODE(3)\fP .IP CURLINFO_FILETIME Pass a pointer to a long to receive the remote time of the retrieved document (in number of seconds since 1 jan 1970 in the GMT/UTC time zone). If you get -1, it can be because of many reasons (unknown, the server hides it or the server doesn't support the command that tells document time etc) and the time of the document is unknown. Note that you must tell the server to collect this information before the transfer is made, by using the \fICURLOPT_FILETIME(3)\fP option to \fIcurl_easy_setopt(3)\fP or you will unconditionally get a -1 back. (Added in 7.5) See \fICURLINFO_FILETIME(3)\fP .IP CURLINFO_TOTAL_TIME Pass a pointer to a double to receive the total time in seconds for the previous transfer, including name resolving, TCP connect etc. See \fICURLINFO_TOTAL_TIME(3)\fP .IP CURLINFO_NAMELOOKUP_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the name resolving was completed. See \fICURLINFO_NAMELOOKUP_TIME(3)\fP .IP CURLINFO_CONNECT_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the connect to the remote host (or proxy) was completed. See \fICURLINFO_CONNECT_TIME(3)\fP .IP CURLINFO_APPCONNECT_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the SSL/SSH connect/handshake to the remote host was completed. This time is most often very near to the PRETRANSFER time, except for cases such as HTTP pipelining where the pretransfer time can be delayed due to waits in line for the pipeline and more. (Added in 7.19.0) See \fICURLINFO_APPCONNECT_TIME(3)\fP .IP CURLINFO_PRETRANSFER_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the file transfer is just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved. It does \fInot\fP involve the sending of the protocol- specific request that triggers a transfer. See \fICURLINFO_PRETRANSFER_TIME(3)\fP .IP CURLINFO_STARTTRANSFER_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the first byte is received by libcurl. This includes CURLINFO_PRETRANSFER_TIME and also the time the server needs to calculate the result. See \fICURLINFO_STARTTRANSFER_TIME(3)\fP .IP CURLINFO_REDIRECT_TIME Pass a pointer to a double to receive the total time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before final transaction was started. CURLINFO_REDIRECT_TIME contains the complete execution time for multiple redirections. (Added in 7.9.7) See \fICURLINFO_REDIRECT_TIME(3)\fP .IP CURLINFO_REDIRECT_COUNT Pass a pointer to a long to receive the total number of redirections that were actually followed. (Added in 7.9.7) See \fICURLINFO_REDIRECT_COUNT(3)\fP .IP CURLINFO_REDIRECT_URL Pass a pointer to a char pointer to receive the URL a redirect \fIwould\fP take you to if you would enable \fICURLOPT_FOLLOWLOCATION(3)\fP. This can come very handy if you think using the built-in libcurl redirect logic isn't good enough for you but you would still prefer to avoid implementing all the magic of figuring out the new URL. (Added in 7.18.2) See \fICURLINFO_REDIRECT_URL(3)\fP .IP CURLINFO_SIZE_UPLOAD Pass a pointer to a double to receive the total amount of bytes that were uploaded. See \fICURLINFO_SIZE_UPLOAD(3)\fP .IP CURLINFO_SIZE_DOWNLOAD Pass a pointer to a double to receive the total amount of bytes that were downloaded. The amount is only for the latest transfer and will be reset again for each new transfer. This counts actual payload data, what's also commonly called body. All meta and header data are excluded and will not be counted in this number. See \fICURLINFO_SIZE_DOWNLOAD(3)\fP .IP CURLINFO_SPEED_DOWNLOAD Pass a pointer to a double to receive the average download speed that curl measured for the complete download. Measured in bytes/second. See \fICURLINFO_SPEED_DOWNLOAD(3)\fP .IP CURLINFO_SPEED_UPLOAD Pass a pointer to a double to receive the average upload speed that curl measured for the complete upload. Measured in bytes/second. See \fICURLINFO_SPEED_UPLOAD(3)\fP .IP CURLINFO_HEADER_SIZE Pass a pointer to a long to receive the total size of all the headers received. Measured in number of bytes. Loading docs/libcurl/opts/CURLINFO_APPCONNECT_TIME.3 0 → 100644 +47 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_APPCONNECT_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_APPCONNECT_TIME \- get the time until the SSL/SSH handshake is completed .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_APPCONNECT_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the time, in seconds, it took from the start until the SSL/SSH connect/handshake to the remote host was completed. This time is most often very near to the \fICURLINFO_PRETRANSFER_TIME(3)\fP time, except for cases such as HTTP pipelining where the pretransfer time can be delayed due to waits in line for the pipeline and more. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.19.0 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " docs/libcurl/opts/CURLINFO_PRETRANSFER_TIME.3 0 → 100644 +47 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_PRETRANSFER_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_PRETRANSFER_TIME \- get the time until the file transfer start .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_PRETRANSFER_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the time, in seconds, it took from the start until the file transfer is just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved. It does \fInot\fP involve the sending of the protocol- specific request that triggers a transfer. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.4.1 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " docs/libcurl/opts/CURLINFO_REDIRECT_COUNT.3 0 → 100644 +42 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_REDIRECT_COUNT 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_REDIRECT_COUNT \- get the number of redirects .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_REDIRECT_COUNT, long *countp); .SH DESCRIPTION Pass a pointer to a long to receive the total number of redirections that were actually followed. .SH PROTOCOLS HTTP(S) .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.9.7 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " docs/libcurl/opts/CURLINFO_REDIRECT_TIME.3 0 → 100644 +46 −0 Original line number Diff line number Diff line !.\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_REDIRECT_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_REDIRECT_TIME \- get the time for all redirection steps .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_REDIRECT_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the total time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before final transaction was started. CURLINFO_REDIRECT_TIME contains the complete execution time for multiple redirections. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.9.7 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " Loading
docs/libcurl/curl_easy_getinfo.3 +17 −60 Original line number Diff line number Diff line Loading @@ -42,82 +42,39 @@ explicitly mentioned below. .SH AVAILABLE INFORMATION The following information can be extracted: .IP CURLINFO_EFFECTIVE_URL Pass a pointer to a char pointer to receive the last used effective URL. See \fICURLINFO_EFFECTIVE_URL(3)\fP .IP CURLINFO_RESPONSE_CODE Pass a pointer to a long to receive the last received HTTP, FTP or SMTP response code. This option was previously known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier. The value will be zero if no server response code has been received. Note that a proxy's CONNECT response should be read with \fICURLINFO_HTTP_CONNECTCODE\fP and not this. Support for SMTP responses added in 7.25.0. See \fICURLINFO_RESPONSE_CODE(3)\fP .IP CURLINFO_HTTP_CONNECTCODE Pass a pointer to a long to receive the last received proxy response code to a CONNECT request. See \fICURLINFO_HTTP_CONNECTCODE(3)\fP .IP CURLINFO_FILETIME Pass a pointer to a long to receive the remote time of the retrieved document (in number of seconds since 1 jan 1970 in the GMT/UTC time zone). If you get -1, it can be because of many reasons (unknown, the server hides it or the server doesn't support the command that tells document time etc) and the time of the document is unknown. Note that you must tell the server to collect this information before the transfer is made, by using the \fICURLOPT_FILETIME(3)\fP option to \fIcurl_easy_setopt(3)\fP or you will unconditionally get a -1 back. (Added in 7.5) See \fICURLINFO_FILETIME(3)\fP .IP CURLINFO_TOTAL_TIME Pass a pointer to a double to receive the total time in seconds for the previous transfer, including name resolving, TCP connect etc. See \fICURLINFO_TOTAL_TIME(3)\fP .IP CURLINFO_NAMELOOKUP_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the name resolving was completed. See \fICURLINFO_NAMELOOKUP_TIME(3)\fP .IP CURLINFO_CONNECT_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the connect to the remote host (or proxy) was completed. See \fICURLINFO_CONNECT_TIME(3)\fP .IP CURLINFO_APPCONNECT_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the SSL/SSH connect/handshake to the remote host was completed. This time is most often very near to the PRETRANSFER time, except for cases such as HTTP pipelining where the pretransfer time can be delayed due to waits in line for the pipeline and more. (Added in 7.19.0) See \fICURLINFO_APPCONNECT_TIME(3)\fP .IP CURLINFO_PRETRANSFER_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the file transfer is just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved. It does \fInot\fP involve the sending of the protocol- specific request that triggers a transfer. See \fICURLINFO_PRETRANSFER_TIME(3)\fP .IP CURLINFO_STARTTRANSFER_TIME Pass a pointer to a double to receive the time, in seconds, it took from the start until the first byte is received by libcurl. This includes CURLINFO_PRETRANSFER_TIME and also the time the server needs to calculate the result. See \fICURLINFO_STARTTRANSFER_TIME(3)\fP .IP CURLINFO_REDIRECT_TIME Pass a pointer to a double to receive the total time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before final transaction was started. CURLINFO_REDIRECT_TIME contains the complete execution time for multiple redirections. (Added in 7.9.7) See \fICURLINFO_REDIRECT_TIME(3)\fP .IP CURLINFO_REDIRECT_COUNT Pass a pointer to a long to receive the total number of redirections that were actually followed. (Added in 7.9.7) See \fICURLINFO_REDIRECT_COUNT(3)\fP .IP CURLINFO_REDIRECT_URL Pass a pointer to a char pointer to receive the URL a redirect \fIwould\fP take you to if you would enable \fICURLOPT_FOLLOWLOCATION(3)\fP. This can come very handy if you think using the built-in libcurl redirect logic isn't good enough for you but you would still prefer to avoid implementing all the magic of figuring out the new URL. (Added in 7.18.2) See \fICURLINFO_REDIRECT_URL(3)\fP .IP CURLINFO_SIZE_UPLOAD Pass a pointer to a double to receive the total amount of bytes that were uploaded. See \fICURLINFO_SIZE_UPLOAD(3)\fP .IP CURLINFO_SIZE_DOWNLOAD Pass a pointer to a double to receive the total amount of bytes that were downloaded. The amount is only for the latest transfer and will be reset again for each new transfer. This counts actual payload data, what's also commonly called body. All meta and header data are excluded and will not be counted in this number. See \fICURLINFO_SIZE_DOWNLOAD(3)\fP .IP CURLINFO_SPEED_DOWNLOAD Pass a pointer to a double to receive the average download speed that curl measured for the complete download. Measured in bytes/second. See \fICURLINFO_SPEED_DOWNLOAD(3)\fP .IP CURLINFO_SPEED_UPLOAD Pass a pointer to a double to receive the average upload speed that curl measured for the complete upload. Measured in bytes/second. See \fICURLINFO_SPEED_UPLOAD(3)\fP .IP CURLINFO_HEADER_SIZE Pass a pointer to a long to receive the total size of all the headers received. Measured in number of bytes. Loading
docs/libcurl/opts/CURLINFO_APPCONNECT_TIME.3 0 → 100644 +47 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_APPCONNECT_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_APPCONNECT_TIME \- get the time until the SSL/SSH handshake is completed .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_APPCONNECT_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the time, in seconds, it took from the start until the SSL/SSH connect/handshake to the remote host was completed. This time is most often very near to the \fICURLINFO_PRETRANSFER_TIME(3)\fP time, except for cases such as HTTP pipelining where the pretransfer time can be delayed due to waits in line for the pipeline and more. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.19.0 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
docs/libcurl/opts/CURLINFO_PRETRANSFER_TIME.3 0 → 100644 +47 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_PRETRANSFER_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_PRETRANSFER_TIME \- get the time until the file transfer start .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_PRETRANSFER_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the time, in seconds, it took from the start until the file transfer is just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved. It does \fInot\fP involve the sending of the protocol- specific request that triggers a transfer. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.4.1 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
docs/libcurl/opts/CURLINFO_REDIRECT_COUNT.3 0 → 100644 +42 −0 Original line number Diff line number Diff line .\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_REDIRECT_COUNT 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_REDIRECT_COUNT \- get the number of redirects .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_REDIRECT_COUNT, long *countp); .SH DESCRIPTION Pass a pointer to a long to receive the total number of redirections that were actually followed. .SH PROTOCOLS HTTP(S) .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.9.7 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
docs/libcurl/opts/CURLINFO_REDIRECT_TIME.3 0 → 100644 +46 −0 Original line number Diff line number Diff line !.\" ************************************************************************** .\" * _ _ ____ _ .\" * Project ___| | | | _ \| | .\" * / __| | | | |_) | | .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * .\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms .\" * are also available at http://curl.haxx.se/docs/copyright.html. .\" * .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell .\" * copies of the Software, and permit persons to whom the Software is .\" * furnished to do so, under the terms of the COPYING file. .\" * .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY .\" * KIND, either express or implied. .\" * .\" ************************************************************************** .\" .TH CURLINFO_REDIRECT_TIME 3 "28 Aug 2015" "libcurl 7.44.0" "curl_easy_getinfo options" .SH NAME CURLINFO_REDIRECT_TIME \- get the time for all redirection steps .SH SYNOPSIS #include <curl/curl.h> CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_REDIRECT_TIME, double *timep); .SH DESCRIPTION Pass a pointer to a double to receive the total time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before final transaction was started. CURLINFO_REDIRECT_TIME contains the complete execution time for multiple redirections. See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page. .SH PROTOCOLS All .SH EXAMPLE TODO .SH AVAILABILITY Added in 7.9.7 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" .BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
