Newer
Older
#ifndef __CURL_CURL_H
#define __CURL_CURL_H
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
***************************************************************************/
/* If you have problems, all libcurl docs and details are found here:
http://curl.haxx.se/libcurl/
*/
#include "curlver.h" /* the libcurl version defines */
Daniel Stenberg
committed
/* The include stuff here below is mainly for time_t! */
#ifdef vms
# include <types.h>
# include <time.h>
#else
# include <sys/types.h>
Daniel Stenberg
committed
# include <time.h>
Daniel Stenberg
committed
typedef void CURL;
#if (defined(WIN32) || defined(_WIN32)) && !defined(CURL_STATICLIB)
#if defined(BUILDING_LIBCURL)
#define CURL_EXTERN __declspec(dllexport)
#else
#define CURL_EXTERN __declspec(dllimport)
#endif
#else
#define CURL_EXTERN
#endif
/*
* We want the typedef curl_off_t setup for large file support on all
* platforms. We also provide a CURL_FORMAT_OFF_T define to use in *printf
* format strings when outputting a variable of type curl_off_t.
#if defined(_MSC_VER) || defined(__LCC__)
#ifdef _WIN32_WCE
typedef long curl_off_t;
#define CURL_FORMAT_OFF_T "%ld"
#else
typedef signed __int64 curl_off_t;
#else /* _MSC_VER || __LCC__ */
#if (defined(__GNUC__) && defined(WIN32)) || defined(__WATCOMC__)
/* gcc on windows or Watcom */
typedef long long curl_off_t;
#define CURL_FORMAT_OFF_T "%I64d"
#else /* GCC or Watcom on Windows */
/* "normal" POSIX approach, do note that this does not necessarily mean that
the type is >32 bits, see the SIZEOF_CURL_OFF_T define for that! */
typedef off_t curl_off_t;
/* Check a range of defines to detect large file support. On Linux it seems
none of these are set by default, so if you don't explicitly switches on
large file support, this define will be made for "small file" support. */
Daniel Stenberg
committed
#ifndef _FILE_OFFSET_BITS
#define _FILE_OFFSET_BITS 0 /* to prevent warnings in the check below */
#define UNDEF_FILE_OFFSET_BITS
#endif
#ifndef FILESIZEBITS
#define FILESIZEBITS 0 /* to prevent warnings in the check below */
#define UNDEF_FILESIZEBITS
#endif
#if defined(_LARGE_FILES) || (_FILE_OFFSET_BITS > 32) || (FILESIZEBITS > 32) \
|| defined(_LARGEFILE_SOURCE) || defined(_LARGEFILE64_SOURCE)
/* For now, we assume at least one of these to be set for large files to
work! */
#define CURL_FORMAT_OFF_T "%lld"
#else /* LARGE_FILE support */
#define CURL_FORMAT_OFF_T "%ld"
#endif /* _MSC_VER || __LCC__ */
Daniel Stenberg
committed
#ifdef UNDEF_FILE_OFFSET_BITS
/* this was defined above for our checks, undefine it again */
#undef _FILE_OFFSET_BITS
#endif
#ifdef UNDEF_FILESIZEBITS
/* this was defined above for our checks, undefine it again */
#undef FILESIZEBITS
#endif
struct curl_httppost {
struct curl_httppost *next; /* next entry in the list */
char *name; /* pointer to allocated name */
long namelength; /* length of name length */
char *contents; /* pointer to allocated data contents */
long contentslength; /* length of contents field */
char *buffer; /* pointer to allocated buffer contents */
long bufferlength; /* length of buffer field */
char *contenttype; /* Content-Type */
struct curl_slist* contentheader; /* list of extra headers for this form */
struct curl_httppost *more; /* if one field name has more than one
file, this link should link to following
files */
long flags; /* as defined below */
#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
#define HTTPPOST_READFILE (1<<1) /* specified content is a file name */
#define HTTPPOST_PTRNAME (1<<2) /* name is only stored pointer
do not free in formfree */
#define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer
do not free in formfree */
#define HTTPPOST_BUFFER (1<<4) /* upload file from buffer */
#define HTTPPOST_PTRBUFFER (1<<5) /* upload file from pointer contents */
Daniel Stenberg
committed
char *showfilename; /* The file name to show. If not set, the
actual file name will be used (if this
is a file part) */
typedef int (*curl_progress_callback)(void *clientp,
double dltotal,
double dlnow,
double ultotal,
double ulnow);
/* Tests have proven that 20K is a very bad buffer size for uploads on
Windows, while 16K for some odd reason performed a lot better. */
#define CURL_MAX_WRITE_SIZE 16384
Daniel Stenberg
committed
typedef size_t (*curl_write_callback)(char *buffer,
size_t size,
size_t nitems,
void *outstream);
/* This is a return code for the read callback that, when returned, will
signal libcurl to immediately abort the current transfer. */
typedef size_t (*curl_read_callback)(char *buffer,
size_t size,
size_t nitems,
void *instream);
#ifndef CURL_NO_OLDIES
/* not used since 7.10.8, will be removed in a future release */
typedef int (*curl_passwd_callback)(void *clientp,
char *buffer,
int buflen);
#endif
typedef enum {
CURLIOE_OK, /* I/O operation successful */
CURLIOE_UNKNOWNCMD, /* command was unknown to callback */
CURLIOE_FAILRESTART, /* failed to restart the read */
CURLIOE_LAST /* never use */
} curlioerr;
typedef enum {
CURLIOCMD_NOP, /* no operation */
CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
CURLIOCMD_LAST /* never use */
} curliocmd;
typedef curlioerr (*curl_ioctl_callback)(CURL *handle,
int cmd,
void *clientp);
/*
* The following typedef's are signatures of malloc, free, realloc, strdup and
* calloc respectively. Function pointers of these types can be passed to the
* curl_global_init_mem() function to set user defined memory management
* callback routines.
*/
typedef void *(*curl_malloc_callback)(size_t size);
typedef void (*curl_free_callback)(void *ptr);
typedef void *(*curl_realloc_callback)(void *ptr, size_t size);
typedef char *(*curl_strdup_callback)(const char *str);
typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size);
/* the kind of data that is passed to information_callback*/
typedef enum {
CURLINFO_TEXT = 0,
CURLINFO_HEADER_IN, /* 1 */
CURLINFO_HEADER_OUT, /* 2 */
CURLINFO_DATA_IN, /* 3 */
CURLINFO_DATA_OUT, /* 4 */
Daniel Stenberg
committed
CURLINFO_SSL_DATA_IN, /* 5 */
CURLINFO_SSL_DATA_OUT, /* 6 */
CURLINFO_END
} curl_infotype;
typedef int (*curl_debug_callback)
(CURL *handle, /* the handle/transfer this concerns */
curl_infotype type, /* what kind of data */
char *data, /* points to the data */
size_t size, /* size of the data pointed to */
void *userptr); /* whatever the user please */
/* All possible error codes from all sorts of curl functions. Future versions
may return other values, stay prepared.
Always add new return codes last. Never *EVER* remove any. The return
codes must remain the same!
*/
CURLE_UNSUPPORTED_PROTOCOL, /* 1 */
CURLE_FAILED_INIT, /* 2 */
CURLE_URL_MALFORMAT, /* 3 */
CURLE_URL_MALFORMAT_USER, /* 4 (NOT USED) */
CURLE_COULDNT_RESOLVE_PROXY, /* 5 */
CURLE_COULDNT_RESOLVE_HOST, /* 6 */
CURLE_COULDNT_CONNECT, /* 7 */
CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */
CURLE_FTP_ACCESS_DENIED, /* 9 a service was denied by the FTP server
due to lack of access - when login fails
this is not returned. */
CURLE_FTP_USER_PASSWORD_INCORRECT, /* 10 */
CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */
CURLE_FTP_WEIRD_USER_REPLY, /* 12 */
CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */
CURLE_FTP_WEIRD_227_FORMAT, /* 14 */
CURLE_FTP_CANT_GET_HOST, /* 15 */
CURLE_FTP_CANT_RECONNECT, /* 16 */
CURLE_FTP_COULDNT_SET_BINARY, /* 17 */
CURLE_PARTIAL_FILE, /* 18 */
CURLE_FTP_COULDNT_RETR_FILE, /* 19 */
CURLE_FTP_WRITE_ERROR, /* 20 */
CURLE_FTP_QUOTE_ERROR, /* 21 */
CURLE_HTTP_RETURNED_ERROR, /* 22 */
CURLE_WRITE_ERROR, /* 23 */
CURLE_MALFORMAT_USER, /* 24 - NOT USED */
CURLE_FTP_COULDNT_STOR_FILE, /* 25 - failed FTP upload */
CURLE_READ_ERROR, /* 26 - could open/read from file */
CURLE_OUT_OF_MEMORY, /* 27 */
CURLE_OPERATION_TIMEOUTED, /* 28 - the timeout time was reached */
CURLE_FTP_COULDNT_SET_ASCII, /* 29 - TYPE A failed */
CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */
CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */
CURLE_FTP_COULDNT_GET_SIZE, /* 32 - the SIZE command failed */
CURLE_HTTP_RANGE_ERROR, /* 33 - RANGE "command" didn't work */
CURLE_HTTP_POST_ERROR, /* 34 */
CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */
CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
CURLE_FILE_COULDNT_READ_FILE, /* 37 */
CURLE_LDAP_CANNOT_BIND, /* 38 */
CURLE_LDAP_SEARCH_FAILED, /* 39 */
CURLE_LIBRARY_NOT_FOUND, /* 40 */
CURLE_FUNCTION_NOT_FOUND, /* 41 */
CURLE_ABORTED_BY_CALLBACK, /* 42 */
CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */
CURLE_BAD_CALLING_ORDER, /* 44 - NOT USED */
CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */
CURLE_BAD_PASSWORD_ENTERED, /* 46 - NOT USED */
CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */
CURLE_UNKNOWN_TELNET_OPTION, /* 48 - User specified an unknown option */
CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */
CURLE_OBSOLETE, /* 50 - NOT USED */
CURLE_SSL_PEER_CERTIFICATE, /* 51 - peer's certificate wasn't ok */
CURLE_GOT_NOTHING, /* 52 - when this is a specific error */
CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */
CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as
default */
CURLE_SEND_ERROR, /* 55 - failed sending network data */
CURLE_RECV_ERROR, /* 56 - failure in receiving network data */
CURLE_SHARE_IN_USE, /* 57 - share is in use */
CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */
CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */
CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */
CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized transfer encoding */
CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */
CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */
CURLE_FTP_SSL_FAILED, /* 64 - Requested FTP SSL level failed */
CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind
CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */
CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not
accepted and we failed to login */
CURL_LAST /* never use! */
typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */
void *ssl_ctx, /* actually an
OpenSSL SSL_CTX */
void *userptr);
/* Make a spelling correction for the operation timed-out define */
#define CURLE_OPERATION_TIMEDOUT CURLE_OPERATION_TIMEOUTED
#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
the obsolete stuff removed! */
/* backwards compatibility with older names */
#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
Daniel Stenberg
committed
typedef enum {
CURLPROXY_HTTP = 0,
CURLPROXY_SOCKS4 = 4,
CURLPROXY_SOCKS5 = 5
} curl_proxytype;
#define CURLAUTH_NONE 0 /* nothing */
#define CURLAUTH_BASIC (1<<0) /* Basic (default) */
#define CURLAUTH_DIGEST (1<<1) /* Digest */
#define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */
#define CURLAUTH_NTLM (1<<3) /* NTLM */
#define CURLAUTH_ANY ~0 /* all types set */
#define CURLAUTH_ANYSAFE (~CURLAUTH_BASIC)
#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
the obsolete stuff removed! */
/* this was the error code 50 in 7.7.3 and a few earlier versions, this
is no longer used by libcurl but is instead #defined here only to not
make programs break */
#define CURLE_ALREADY_COMPLETE 99999
/* These are just to make older programs not break: */
#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
#define CURL_ERROR_SIZE 256
/* parameter for the CURLOPT_FTP_SSL option */
typedef enum {
CURLFTPSSL_NONE, /* do not attempt to use SSL */
CURLFTPSSL_TRY, /* try using SSL, proceed anyway otherwise */
CURLFTPSSL_CONTROL, /* SSL for the control connection or fail */
CURLFTPSSL_ALL, /* SSL for all communication or fail */
CURLFTPSSL_LAST /* not an option, never use */
} curl_ftpssl;
/* parameter for the CURLOPT_FTPSSLAUTH option */
typedef enum {
CURLFTPAUTH_DEFAULT, /* let libcurl decide */
CURLFTPAUTH_SSL, /* use "AUTH SSL" */
CURLFTPAUTH_TLS, /* use "AUTH TLS" */
CURLFTPAUTH_LAST /* not an option, never use */
} curl_ftpauth;
Daniel Stenberg
committed
/* long may be 32 or 64 bits, but we should never depend on anything else
but 32 */
#define CURLOPTTYPE_LONG 0
#define CURLOPTTYPE_OBJECTPOINT 10000
#define CURLOPTTYPE_FUNCTIONPOINT 20000
Daniel Stenberg
committed
/* name is uppercase CURLOPT_<name>,
type is one of the defined CURLOPTTYPE_<type>
/*
* Figure out if we can use the ## operator, which is supported by ISO/ANSI C
* and C++. Some compilers support it without setting __STDC__ or __cplusplus
* so we need to carefully check for them too. We don't use configure-checks
* for these since we want these headers to remain generic and working for all
* platforms.
*/
#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__)
/* This compiler is believed to have an ISO compatible preprocessor */
#define CURL_ISOCPP
#else
/* This compiler is believed NOT to have an ISO compatible preprocessor */
#undef CURL_ISOCPP
#endif
#ifdef CURL_ISOCPP
#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
Daniel Stenberg
committed
#else
/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
#define LONG CURLOPTTYPE_LONG
#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT
#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
Daniel Stenberg
committed
#define CINIT(name,type,number) CURLOPT_/**/name = type + number
#endif
/*
* This macro-mania below setups the CURLOPT_[what] enum, to be used with
* curl_easy_setopt(). The first argument in the CINIT() macro is the [what]
* word.
*/
/* This is the FILE * or void * the regular output should be written to. */
/* Port number to connect to, if other than default. */
/* "name:password" to use when fetching. */
/* "name:password" to use with proxy. */
/* Range to get, specified as an ASCII string. */
/* Specified file stream to upload from (use as input): */
/* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
* bytes big. If this is not used, error messages go to stderr instead: */
/* Function that will be called to store the output (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
/* Function that will be called to read the input (instead of fread). The
* parameters will use fread() syntax, make sure to follow them. */
/* Time-out the read operation after this amount of seconds */
/* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
* how large the file being sent really is. That allows better error
* checking and better verifies that the upload was succcessful. -1 means
* unknown size.
*
* For large file support, there is also a _LARGE version of the key
* which takes an off_t type, allowing platforms with larger off_t
* sizes to handle larger files. See below for INFILESIZE_LARGE.
*/
/* Set the FTP PORT string (interface name, named or numerical IP address)
Use i.e '-' to use default address. */
/* Set the User-Agent string (examined by some CGIs) */
/* If the download receives less than "low speed limit" bytes/second
* during "low speed time" seconds, the operations is aborted.
* You could i.e if you have a pretty high speed connection, abort if
* it is less than 2000 bytes/sec during 20 seconds.
/* Set the continuation offset.
*
* Note there is also a _LARGE version of this key which uses
* off_t types, allowing for large file offsets on platforms which
* use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
*/
/* This points to a linked list of headers, struct curl_slist kind */
/* This points to a linked list of post entries, struct HttpPost */
/* name of the file keeping your private SSL-certificate */
/* password for the SSL-private key, keep this for compatibility */
/* password for the SSL private key */
CINIT(SSLKEYPASSWD, OBJECTPOINT, 26),
/* send FILE * or void * to store headers to, if you use a callback it
is simply passed to the callback unmodified */
/* point to a file to read the initial cookies from, also enables
"cookie awareness" */
See CURL_SSLVERSION defines below. */
/* What kind of HTTP time condition to use, see defines */
/* Time to use with the above condition. Specified in number of seconds
since 1 Jan 1970 */
/* Custom request, for customizing the get command like
HTTP: DELETE, TRACE and others
FTP: to use a different list command
*/
/* HTTP request, for odd commands like DELETE, TRACE and others */
/* Pass a pointer to string of the output using full variable-replacement
as described elsewhere. */
CINIT(VERBOSE, LONG, 41), /* talk a lot */
CINIT(HEADER, LONG, 42), /* throw the header out too */
CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */
CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */
CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */
CINIT(UPLOAD, LONG, 46), /* this is an upload */
CINIT(POST, LONG, 47), /* HTTP POST method */
CINIT(FTPLISTONLY, LONG, 48), /* Use NLST when listing ftp dir */
CINIT(FTPAPPEND, LONG, 50), /* Append instead of overwrite on upload! */
/* Specify whether to read the user+password from the .netrc or the URL.
* This must be one of the CURL_NETRC_* enums below. */
CINIT(NETRC, LONG, 51),
CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */
CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */
CINIT(PUT, LONG, 54), /* HTTP PUT */
/* Function that will be called instead of the internal progress display
* function. This function should be defined as the curl_progress_callback
* prototype defines. */
/* We want the referer field set automatically when following locations */
/* Port of the proxy, can be set in the proxy string as well with:
"[host]:[port]" */
/* size of the POST input data, if strlen() is not good to use */
/* tunnel non-http operations through a HTTP proxy */
CINIT(HTTPPROXYTUNNEL, LONG, 61),
/* Set the interface string to use as outgoing network interface */
CINIT(INTERFACE, OBJECTPOINT, 62),
/* Set the krb4 security level, this also enables krb4 awareness. This is a
* string, 'clear', 'safe', 'confidential' or 'private'. If the string is
* set but doesn't match one of these, 'private' will be used. */
CINIT(KRB4LEVEL, OBJECTPOINT, 63),
/* Set if we should verify the peer in ssl handshake, set 1 to verify. */
CINIT(SSL_VERIFYPEER, LONG, 64),
/* The CApath or CAfile used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAINFO, OBJECTPOINT, 65),
/* 66 = OBSOLETE */
/* 67 = OBSOLETE */
/* Maximum number of http redirects to follow */
CINIT(MAXREDIRS, LONG, 68),
/* Pass a long set to 1 to get the date of the requested document (if
possible)! Pass a zero to shut it off. */
CINIT(FILETIME, LONG, 69),
/* This points to a linked list of telnet options */
CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
/* Max amount of cached alive connections */
CINIT(MAXCONNECTS, LONG, 71),
/* What policy to use when closing connections when the cache is filled
up */
CINIT(CLOSEPOLICY, LONG, 72),
/* Set to explicitly use a new connection for the upcoming transfer.
Do not use this unless you're absolutely sure of this, as it makes the
operation slower and is less friendly for the network. */
CINIT(FRESH_CONNECT, LONG, 74),
/* Set to explicitly forbid the upcoming transfer's connection to be re-used
when done. Do not use this unless you're absolutely sure of this, as it
makes the operation slower and is less friendly for the network. */
CINIT(FORBID_REUSE, LONG, 75),
/* Set to a file name that contains random data for libcurl to use to
seed the random engine when doing SSL connects. */
CINIT(RANDOM_FILE, OBJECTPOINT, 76),
/* Set to the Entropy Gathering Daemon socket pathname */
CINIT(EGDSOCKET, OBJECTPOINT, 77),
/* Time-out connect operations after this amount of seconds, if connects
are OK within this time, then fine... This only aborts the connect
phase. [Only works on unix-style/SIGALRM operating systems] */
CINIT(CONNECTTIMEOUT, LONG, 78),
/* Function that will be called to store headers (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
/* Set this to force the HTTP request to get back to GET. Only really usable
if POST, PUT or a custom request have been used first.
*/
CINIT(HTTPGET, LONG, 80),
/* Set if we should verify the Common name from the peer certificate in ssl
* handshake, set 1 to check existence, 2 to ensure that it matches the
* provided hostname. */
CINIT(SSL_VERIFYHOST, LONG, 81),
/* Specify which file name to write all known cookies in after completed
operation. Set file name to "-" (dash) to make it go to stdout. */
CINIT(COOKIEJAR, OBJECTPOINT, 82),
/* Specify which SSL ciphers to use */
CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83),
/* Specify which HTTP version to use! This must be set to one of the
CURL_HTTP_VERSION* enums set below. */
CINIT(HTTP_VERSION, LONG, 84),
/* Specificly switch on or off the FTP engine's use of the EPSV command. By
default, that one will always be attempted before the more traditional
/* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
CINIT(SSLCERTTYPE, OBJECTPOINT, 86),
/* name of the file keeping your private SSL-key */
CINIT(SSLKEY, OBJECTPOINT, 87),
/* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
CINIT(SSLKEYTYPE, OBJECTPOINT, 88),
/* crypto engine for the SSL-sub system */
CINIT(SSLENGINE, OBJECTPOINT, 89),
/* set the crypto engine for the SSL-sub system as default
the param has no meaning...
*/
CINIT(SSLENGINE_DEFAULT, LONG, 90),
/* Non-zero value means to use the global dns cache */
CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To becomeO BSOLETE soon */
Sterling Hughes
committed
/* DNS cache timeout */
CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
/* send linked-list of pre-transfer QUOTE commands (Wesley Laxton)*/
CINIT(PREQUOTE, OBJECTPOINT, 93),
/* set the debug function */
CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
/* set the data for the debug function */
CINIT(DEBUGDATA, OBJECTPOINT, 95),
/* mark this as start of a cookie session */
CINIT(COOKIESESSION, LONG, 96),
/* The CApath directory used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAPATH, OBJECTPOINT, 97),
/* Instruct libcurl to use a smaller receive buffer */
CINIT(BUFFERSIZE, LONG, 98),
/* Instruct libcurl to not use any signal/alarm handlers, even when using
timeouts. This option is useful for multi-threaded applications.
See libcurl-the-guide for more background information. */
CINIT(NOSIGNAL, LONG, 99),
/* Provide a CURLShare for mutexing non-ts data */
CINIT(SHARE, OBJECTPOINT, 100),
Daniel Stenberg
committed
/* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
CURLPROXY_SOCKS4 and CURLPROXY_SOCKS5. */
CINIT(PROXYTYPE, LONG, 101),
Daniel Stenberg
committed
/* Set the Accept-Encoding string. Use this to tell a server you would like
the response to be compressed. */
CINIT(ENCODING, OBJECTPOINT, 102),
Daniel Stenberg
committed
/* Set pointer to private data */
CINIT(PRIVATE, OBJECTPOINT, 103),
/* Set aliases for HTTP 200 in the HTTP Response header */
CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
/* Continue to send authentication (user+password) when following locations,
even when hostname changed. This can potentionally send off the name
and password to whatever host the server decides. */
CINIT(UNRESTRICTED_AUTH, LONG, 105),
/* Specificly switch on or off the FTP engine's use of the EPRT command ( it
also disables the LPRT attempt). By default, those ones will always be
attempted before the good old traditional PORT command. */
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_USERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(HTTPAUTH, LONG, 107),
/* Set the ssl context callback function, currently only for OpenSSL ssl_ctx
in second argument. The function must be matching the
curl_ssl_ctx_callback proto. */
CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108),
/* Set the userdata for the ssl context callback function's third
argument */
CINIT(SSL_CTX_DATA, OBJECTPOINT, 109),
/* FTP Option that causes missing dirs to be created on the remote server */
CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110),
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(PROXYAUTH, LONG, 111),
/* FTP option that changes the timeout, in seconds, associated with
getting a response. This is different from transfer timeout time and
essentially places a demand on the FTP server to acknowledge commands
in a timely manner. */
CINIT(FTP_RESPONSE_TIMEOUT, LONG , 112),
/* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
tell libcurl to resolve names to those IP versions only. This only has
affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */
CINIT(IPRESOLVE, LONG, 113),
/* Set this option to limit the size of a file that will be downloaded from
an HTTP or FTP server.
Note there is also _LARGE version which adds large file support for
platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
CINIT(MAXFILESIZE, LONG, 114),
/* See the comment for INFILESIZE above, but in short, specifies
* the size of the file being uploaded. -1 means unknown.
*/
CINIT(INFILESIZE_LARGE, OFF_T, 115),
/* Sets the continuation offset. There is also a LONG version of this;
* look above for RESUME_FROM.
*/
CINIT(RESUME_FROM_LARGE, OFF_T, 116),
/* Sets the maximum size of data that will be downloaded from
* an HTTP or FTP server. See MAXFILESIZE above for the LONG version.
*/
CINIT(MAXFILESIZE_LARGE, OFF_T, 117),
/* Set this option to the file name of your .netrc file you want libcurl
to parse (using the CURLOPT_NETRC option). If not set, libcurl will do
a poor attempt to find the user's home directory and check for a .netrc
file in there. */
/* Enable SSL/TLS for FTP, pick one of:
CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise
CURLFTPSSL_CONTROL - SSL for the control connection or fail
CURLFTPSSL_ALL - SSL for all communication or fail
*/
/* The _LARGE version of the standard POSTFIELDSIZE option */
CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120),
/* Enable/disable the TCP Nagle algorithm */
CINIT(TCP_NODELAY, LONG, 121),
/* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* When doing 3rd party transfer, set the source user and password with
this */
CINIT(SOURCE_USERPWD, OBJECTPOINT, 123),
/* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* When doing 3rd party transfer, set the source pre-quote linked list
of commands with this */
CINIT(SOURCE_PREQUOTE, OBJECTPOINT, 127),
/* When doing 3rd party transfer, set the source post-quote linked list
of commands with this */
CINIT(SOURCE_POSTQUOTE, OBJECTPOINT, 128),
/* When FTP over SSL/TLS is selected (with CURLOPT_FTP_SSL), this option
can be used to change libcurl's default action which is to first try
"AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
response has been received.
Available parameters are:
CURLFTPAUTH_DEFAULT - let libcurl decide
CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS
CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL
*/
CINIT(FTPSSLAUTH, LONG, 129),
CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
CINIT(IOCTLDATA, OBJECTPOINT, 131),
/* To make a 3rd party transfer, set the source URL with this */
CINIT(SOURCE_URL, OBJECTPOINT, 132),
/* When doing 3rd party transfer, set the source quote linked list of
commands with this */
CINIT(SOURCE_QUOTE, OBJECTPOINT, 133),
Daniel Stenberg
committed
/* zero terminated string for pass on to the FTP server when asked for
"account" info */
CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
CURLOPT_LASTENTRY /* the last unused */
/* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
name resolves addresses using more than one IP protocol version, this
option might be handy to force libcurl to use a specific IP version. */
#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP
versions that your system allows */
#define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */
#define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */
/* three convenient "aliases" that follow the name scheme better */
#define CURLOPT_WRITEDATA CURLOPT_FILE
#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
the obsolete stuff removed! */
Daniel Stenberg
committed
#define CURLOPT_HTTPREQUEST -1
#define CURLOPT_FTPASCII CURLOPT_TRANSFERTEXT
Daniel Stenberg
committed
#define CURLOPT_MUTE -2
#define CURLOPT_PASSWDFUNCTION -3
#define CURLOPT_PASSWDDATA -4
#define CURLOPT_CLOSEFUNCTION -5
#define CURLOPT_SOURCE_HOST -6
#define CURLOPT_SOURCE_PATH -7
#define CURLOPT_SOURCE_PORT -8
#define CURLOPT_PASV_HOST -9
#else
/* This is set if CURL_NO_OLDIES is defined at compile-time */
#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
#endif
/* These enums are for use with the CURLOPT_HTTP_VERSION option. */
enum {
CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
like the library to choose the best possible
for us! */
CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */
CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */
CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
};
/* These enums are for use with the CURLOPT_NETRC option. */
enum CURL_NETRC_OPTION {
CURL_NETRC_IGNORED, /* The .netrc will never be read.
* This is the default. */
CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred
* to one in the .netrc. */
CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored.
* Unless one is set programmatically, the .netrc
* will be queried. */
CURL_NETRC_LAST
};
enum {
CURL_SSLVERSION_DEFAULT,
CURL_SSLVERSION_TLSv1,
CURL_SSLVERSION_SSLv2,
CURL_SSLVERSION_SSLv3,
CURL_SSLVERSION_LAST /* never use, keep last */
};
CURL_TIMECOND_IFMODSINCE,
CURL_TIMECOND_IFUNMODSINCE,
CURL_TIMECOND_LASTMOD,
#ifdef __BEOS__
#include <support/SupportDefs.h>
#endif
/* curl_strequal() and curl_strnequal() are subject for removal in a future
libcurl, see lib/README.curlx for details */
CURL_EXTERN int (curl_strequal)(const char *s1, const char *s2);
CURL_EXTERN int (curl_strnequal)(const char *s1, const char *s2, size_t n);
/* name is uppercase CURLFORM_<name> */
#ifdef CFINIT
#undef CFINIT
#endif
Daniel Stenberg
committed
#ifdef CURL_ISOCPP
#define CFINIT(name) CURLFORM_ ## name
Daniel Stenberg
committed
#else
/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
#define CFINIT(name) CURLFORM_/**/name
#endif
typedef enum {
CFINIT(NOTHING), /********* the first one is unused ************/
/* */
CFINIT(COPYNAME),
CFINIT(PTRNAME),
CFINIT(NAMELENGTH),