CHANGES

                                  _   _ ____  _     
                              ___| | | |  _ \| |    
                             / __| | | | |_) | |    
                            | (__| |_| |  _ <| |___ 
                             \___|\___/|_| \_\_____|

                               History of Changes

Daniel (22 November 2000)
- Added the libcurl CURLOPT_FILETIME setopt, when set it tries to get the
  modified time of the remote document. This is a special option since it
  involves an extra set of commands on FTP servers. (Using the MDTM command
  which is not in the RFC959)

  curl_easy_getinfo() got a corresponding CURLINFO_FILETIME to get the time
  after a transfer. It'll return a zero if CURLOPT_FILETIME wasn't used or if
  the time wasn't possible to get.

  --head/-I used on a FTP server will now present a 'Last-Modified:' header
  if curl could get the time of the specified file.

- Added the option '--cacert [file]' to curl, which allows a specified PEM
  file to be used to verify the peer's certificate when doing HTTPS
  connections. This has been requested, rather recently by Hulka Bohuslav but
  others have asked for it before as well.

Daniel (21 November 2000)
- Numerous fixes the test suite has brought into the daylight:

   * curl_unescape() could return a too long string
   * on ftp transfer failures, there could be memory leaks
   * ftp CWD could use bad directory names
   * memdebug now uses the mprintf() routines for better portability
   * free(NULL) removed when doing resumed transfers

- Added a bunch of test cases for FTP.

- General cleanups to make less warnings with gcc -Wall -pedantic.

- I made the tests/ftpserver.pl work with the most commonly used ftp
  operations. PORT, PASV, RETR, STOR, LIST, SIZE, USER, PASS all work now. Now
  all I have to do is integrate the ftp server doings in the runtests.pl
  script so that ftp tests can be run the same way http tests already run.

Daniel (20 November 2000)
- Made libcurl capable of dealing with any-length URLs. The former limit of
  4096 bytes was a bit annoying when people wanted to use curl to really make
  life tough on a web server. Now, the command line limit is the most annoying
  but that can be circumvented by using a config file.

  NOTE: there is still a 4096-byte limit on URLs extracted from Location:
  headers.

- Corrected the spelling of 'resolve' in two error messages.

- Alexander Kourakos posted a bug report and a patch that corrected it! It
  turned out that lynx and wget support lowercase environment variable names
  where curl only looked for the uppercase versions. Now curl will use the
  lowercase versions if they exist, but if they don't, it'll use the uppercase
  versions.

Daniel (17 November 2000)
- curl_formfree() was added. How come no one missed that one before? I ran the
  test suite with the malloc debug enabled and got lots of "nice" warnings on
  memory leaks. The most serious one was this. There were also leaks in the
  cookie handling, and a few errors when curl failed to connect and similar
  things. More tests cases were added to cover up and to verify that these
  problems have been removed.

- Mucho updated config file parser (I'm dead tired of all the bug reports and
  weird behaviour I get on the former one). It works slightly differently now,
  although I doubt many people will notice the differences. The main
  difference being that if you use options that require parameters, they must
  both be specified on the same line. With this new parser, you can also
  specify long options without '--' and you may separate options and
  parameters with : or =. It makes a config file line could look like:

        user-agent = "foobar and something"

  Parameters within quotes may contain spaces. Without quotes, they're
  expected to be a single non-space word.

  Had to patch the command line argument parser a little to make this work.

- Added --url as an option to allow the URL to be specified this way. It makes
  way nicer config files. The previous way of specifying URLs in the config
  file doesn't work anymore.

Daniel (15 November 2000)
- Using certain characters in usernames or passwords for HTTP authentication
  failed. This was due to the mprintf() that had a silly check for letters,
  and if they weren't isprint() they weren't outputed "as-is". This caused
  passwords and usernames using '§' (for example) to fail.

Version 7.4.2

Daniel (15 November 2000)
- 'tests/runtests.pl' now sorts the test cases properly when 'all' is used.

Daniel (14 November 2000)
- I fell over the draft-ietf-ftpext-mlst-12.txt Internet Draft titled
  "Extensions to FTP" that contains a defined way how the ftp command SIZE
  could be assumed to work.

- Laurent Papier posted a bug report about using "-C -" and FTP uploading a
  file that isn't prsent on the server. The server might then return a 550 and
  curl will fail. Should it instead as Laurent Papier suggests, start
  uploading from the beginning as a normal upload?

Daniel (13 November 2000)
- Fixed a crash with the followlocation counter.

- While writing test cases for the test suite, I discovered an old limitation
  that prevented -o and -T to be used at the same time. I removed this
  immediately as this has no relevance in the current libcurl.
  
- Chris Faherty fixed a free-twice problem in lib/file.c

- I fixed the perl http server problem in the test suite.

Version 7.4.2 pre4

Daniel (10 November 2000)
- I've (finally) started working on the curl test suite. It is in the new
  tests/ directory. It requires sh and perl. There's a TCP server in perl and
  most of the other stuff running a pretty simple shell script.

  I've only made four test cases so far, but it proves the system can work.

- Laurent Papier noticed that curl didn't set TYPE when doing --head checks
  for sizes on FTP servers. Some servers seem to return different sizes
  depending on whether ASCII or BINARY is used!

- Laurent Papier detected that if you appended a FTP upload and everything was
  already uploaded, curl would hang.

- Angus Mackay's getpass_r() in lib/getpass.c is now compliant with the
  getpass_r() function it seems some systems actually have.
  
- Venkataramana Mokkapati detected a bug in the cookie parser and corrected
  it.  If the cookie was set for the full host name (domain=full.host.com),
  the cookie was never sent back because of a faulty length comparison between
  the set domain length and the current host name.

Daniel (9 November 2000)
- Added a configure check for gethostbyname in -lsocket (OS/2 seems to need
  it). Added a check for RSAglue/rsaref for the cases where libcrypto is found
  but libssl isn't. I haven't verified this fix yet though, as I have no
  system that requires those libs to build.
  
Version 7.4.2 pre3

Daniel (7 November 2000)
- Removed perror() outputs from getpass.c. Angus Mackay also agreed to a
  slightly modified license of the getpass.c file as the prototype was changed.

Daniel (6 November 2000)
- Added possibility to set a password callback to use instead of the built-in.
  They're controled with curl_easy_setopt() of course, the tags are
  CURLOPT_PASSWDFUNCTION and CURLOPT_PASSWDDATA.

- Used T. Bharath's thinking and fixed the timers that showed terribly wrong
  times when location: headers were followed.

- Emmanuel Tychon discovered that curl didn't really like user names only in
  the URL. I corrected this and I also fixed the since long living problem
  with URL encoded user names and passwords in the URLs. They should work now.
  
Daniel (2 November 2000)
- When I added --interface, the new error code that was added with it was
  inserted in the wrong place and thus all error codes from 35 and upwards got
  increased one step. This is now corrected, we're back at the previous
  numbers. All new exit codes should be added at the end.

Daniel (1 November 2000)
- Added a check for signal() in the configure script so that if sigaction()
  isn't present, we can use signal() instead.

- I'm having a license discussion going on privately. The issue is yet again
  GPL-licensed programs that have problems with MPL. I am leaning towards
  making a kind of dual-license that will solve this once and for all...

Daniel (31 October 2000)
- Added the packages/ directory. I intend to let this contain some docs and
  templates on how to generate custom-format packages for various platforms.
  I've now removed the RPM related curl.spec files from the archive root.

Daniel (30 October 2000)
- T. Bharath brought a set of patches that bring new functionality to
  curl_easy_getinfo() and curl_easy_setopt(). Now you can request peer
  certificate verification with the *setopt() CURLOPT_SSL_VERIFYPEER option
  and then use the CURLOPT_CAINFO to set the certificate to verify the remote
  peer against. After an such an operation with a verification request, the
  *_getinfo() option CURLINFO_SSL_VERIFYRESULT will return information about
  whether the verification succeeded or not.  

Daniel (27 October 2000)
- Georg Horn brought us a splendid patch that solves the long-standing
  annoying problem with timeouts that made curl exit with silly exit codes
  (which as been commented out lately). This solution is sigaction() based and