Newer
Older
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
***************************************************************************/
#ifndef CURL_DISABLE_HTTP
/* -- WIN32 approved -- */
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include <stdlib.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
#include <time.h>
#include <io.h>
#else
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_TIME_H
#ifdef TIME_WITH_SYS_TIME
#include <time.h>
#endif
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <netdb.h>
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_NET_IF_H
#include <net/if.h>
#endif
#include <sys/ioctl.h>
#include <signal.h>
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#endif
#include "urldata.h"
#include <curl/curl.h>
Daniel Stenberg
committed
#include "transfer.h"
#include "sendf.h"
#include "formdata.h"
#include "progress.h"
#include "base64.h"
#include "cookie.h"
#include "strequal.h"
#include "ssluse.h"
#include "http_digest.h"
#include "http_ntlm.h"
#include "http_negotiate.h"
Daniel Stenberg
committed
#include "url.h"
#include "http.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
/* The last #include file should be: */
#include "memdebug.h"
#endif
static CURLcode Curl_output_basic_proxy(struct connectdata *conn);
/*
* This function checks the linked list of custom HTTP headers for a particular
* header (prefix).
*/
static char *checkheaders(struct SessionHandle *data, const char *thisheader)
{
struct curl_slist *head;
size_t thislen = strlen(thisheader);
for(head = data->set.headers; head; head=head->next) {
if(strnequal(head->data, thisheader, thislen))
return head->data;
}
return NULL;
}
static CURLcode Curl_output_basic(struct connectdata *conn)
{
char *authorization;
struct SessionHandle *data=conn->data;
sprintf(data->state.buffer, "%s:%s", conn->user, conn->passwd);
if(Curl_base64_encode(data->state.buffer, strlen(data->state.buffer),
if(conn->allocptr.userpwd)
free(conn->allocptr.userpwd);
conn->allocptr.userpwd = aprintf( "Authorization: Basic %s\015\012",
authorization);
free(authorization);
}
else
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
static CURLcode Curl_output_basic_proxy(struct connectdata *conn)
{
char *authorization;
struct SessionHandle *data=conn->data;
sprintf(data->state.buffer, "%s:%s",
conn->proxyuser, conn->proxypasswd);
if(Curl_base64_encode(data->state.buffer, strlen(data->state.buffer),
Curl_safefree(conn->allocptr.proxyuserpwd);
conn->allocptr.proxyuserpwd =
aprintf("Proxy-authorization: Basic %s\015\012", authorization);
free(authorization);
}
else
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
/*
* Curl_http_auth_act() checks what authentication methods that are available
* and decides which one (if any) to use. It will set 'newurl' if an auth
* metod was picked.
*/
void Curl_http_auth_act(struct connectdata *conn)
{
struct SessionHandle *data = conn->data;
if(data->state.authavail) {
/* The order of these checks is highly relevant, as this will be the order
of preference in case of the existance of multiple accepted types. */
if(data->state.authavail & CURLAUTH_GSSNEGOTIATE)
data->state.authwant = CURLAUTH_GSSNEGOTIATE;
else if(data->state.authavail & CURLAUTH_DIGEST)
data->state.authwant = CURLAUTH_DIGEST;
else if(data->state.authavail & CURLAUTH_NTLM)
data->state.authwant = CURLAUTH_NTLM;
else if(data->state.authavail & CURLAUTH_BASIC)
data->state.authwant = CURLAUTH_BASIC;
else
data->state.authwant = CURLAUTH_NONE; /* clear it */
if(data->state.authwant)
conn->newurl = strdup(data->change.url); /* clone URL */
data->state.authavail = CURLAUTH_NONE; /* clear it here */
}
}
Daniel Stenberg
committed
/**
* Setup the authentication headers for the host/proxy and the correct
Daniel Stenberg
committed
* authentication method. @p conn->data->state.authdone set to TRUE
* when authentication is done.
*
* @param conn all information about the current connection
*/
static CURLcode http_auth_headers(struct connectdata *conn,
char *request,
Daniel Stenberg
committed
char *path)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
char *auth=NULL;
Daniel Stenberg
committed
curlassert(data);
data->state.authdone = FALSE; /* default is no */
if(!data->state.authstage) {
if(conn->bits.httpproxy && conn->bits.proxy_user_passwd)
Curl_http_auth_stage(data, 407);
else if(conn->bits.user_passwd)
Curl_http_auth_stage(data, 401);
else {
Daniel Stenberg
committed
data->state.authdone = TRUE;
return CURLE_OK; /* no authentication with no user or password */
}
}
/* To prevent the user+password to get sent to other than the original
host due to a location-follow, we do some weirdo checks here */
if(!data->state.this_is_a_follow ||
!data->state.auth_host ||
curl_strequal(data->state.auth_host, conn->hostname) ||
data->set.http_disable_hostname_check_before_authentication) {
/* Send proxy authentication header if needed */
if (data->state.authstage == 407) {
#ifdef USE_SSLEAY
if(data->state.authwant == CURLAUTH_NTLM) {
auth=(char *)"NTLM";
Daniel Stenberg
committed
result = Curl_output_ntlm(conn, TRUE);
if(result)
return result;
}
else
#endif
Daniel Stenberg
committed
if(data->state.authwant == CURLAUTH_BASIC) {
/* Basic */
if(conn->bits.proxy_user_passwd &&
!checkheaders(data, "Proxy-authorization:")) {
auth=(char *)"Basic";
result = Curl_output_basic_proxy(conn);
if(result)
return result;
}
Daniel Stenberg
committed
data->state.authdone = TRUE;
/* Switch to web authentication after proxy authentication is done */
Curl_http_auth_stage(data, 401);
}
infof(data, "Proxy auth using %s with user '%s'\n",
auth, conn->proxyuser?conn->proxyuser:"");
}
/* Send web authentication header if needed */
if (data->state.authstage == 401) {
auth = NULL;
#ifdef HAVE_GSSAPI
if((data->state.authwant == CURLAUTH_GSSNEGOTIATE) &&
data->state.negotiate.context &&
!GSS_ERROR(data->state.negotiate.status)) {
result = Curl_output_negotiate(conn);
if (result)
return result;
Daniel Stenberg
committed
data->state.authdone = TRUE;
}
else
#endif
#ifdef USE_SSLEAY
if(data->state.authwant == CURLAUTH_NTLM) {
auth=(char *)"NTLM";
Daniel Stenberg
committed
result = Curl_output_ntlm(conn, FALSE);
if(result)
return result;
}
else
#endif
{
if((data->state.authwant == CURLAUTH_DIGEST) &&
data->state.digest.nonce) {
auth=(char *)"Digest";
result = Curl_output_digest(conn,
(unsigned char *)request,
(unsigned char *)path);
if(result)
return result;
Daniel Stenberg
committed
data->state.authdone = TRUE;
}
Daniel Stenberg
committed
else if(data->state.authwant == CURLAUTH_BASIC) {/* Basic */
if(conn->bits.user_passwd &&
!checkheaders(data, "Authorization:")) {
auth=(char *)"Basic";
result = Curl_output_basic(conn);
if(result)
return result;
}
/* basic is always ready */
Daniel Stenberg
committed
data->state.authdone = TRUE;
}
}
if(auth)
infof(data, "Server auth using %s with user '%s'\n",
auth, conn->user);
}
}
else
Daniel Stenberg
committed
data->state.authdone = TRUE;
return result;
}
/*
* Curl_http_auth() deals with Proxy-Authenticate: and WWW-Authenticate:
* headers. They are dealt with both in the transfer.c main loop and in the
* proxy CONNECT loop.
*/
CURLcode Curl_http_auth(struct connectdata *conn,
int httpcode,
char *header) /* pointing to the first non-space */
{
/*
* This resource requires authentication
*/
struct SessionHandle *data = conn->data;
long *availp;
char *start;
if (httpcode == 407) {
start = header+strlen("Proxy-authenticate:");
availp = &data->info.proxyauthavail;
}
else {
start = header+strlen("WWW-Authenticate:");
availp = &data->info.httpauthavail;
}
/*
* Switch from proxy to web authentication and back if needed
*/
if (httpcode == 407 && data->state.authstage != 407)
Curl_http_auth_stage(data, 407);
else if (httpcode == 401 && data->state.authstage != 401)
Curl_http_auth_stage(data, 401);
/* pass all white spaces */
while(*start && isspace((int)*start))
start++;
/*
* Here we check if we want the specific single authentiction (using ==) and
* if we do, we initiate usage of it.
*
* If the provided authentication is wanted as one out of several accepted
* types (using &), we OR this authenticaion type to the authavail
* variable.
*/
#ifdef HAVE_GSSAPI
Daniel Stenberg
committed
if (checkprefix("GSS-Negotiate", start) ||
checkprefix("Negotiate", start)) {
*availp |= CURLAUTH_GSSNEGOTIATE;
if(data->state.authwant == CURLAUTH_GSSNEGOTIATE) {
/* if exactly this is wanted, go */
int neg = Curl_input_negotiate(conn, start);
if (neg == 0)
conn->newurl = strdup(data->change.url);
}
else
if(data->state.authwant & CURLAUTH_GSSNEGOTIATE)
data->state.authavail |= CURLAUTH_GSSNEGOTIATE;
}
else
#endif
#ifdef USE_SSLEAY
/* NTLM support requires the SSL crypto libs */
if(checkprefix("NTLM", start)) {
*availp |= CURLAUTH_NTLM;
if(data->state.authwant == CURLAUTH_NTLM) {
/* NTLM authentication is activated */
CURLntlm ntlm =
Curl_input_ntlm(conn, (bool)(httpcode == 407), start);
if(CURLNTLM_BAD != ntlm)
conn->newurl = strdup(data->change.url); /* clone string */
else
infof(data, "Authentication problem. Ignoring this.\n");
}
else
if(data->state.authwant & CURLAUTH_NTLM)
data->state.authavail |= CURLAUTH_NTLM;
}
else
#endif
if(checkprefix("Digest", start)) {
*availp |= CURLAUTH_DIGEST;
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
if(data->state.authwant == CURLAUTH_DIGEST) {
/* Digest authentication is activated */
CURLdigest dig = CURLDIGEST_BAD;
if(data->state.digest.nonce)
infof(data, "Authentication problem. Ignoring this.\n");
else
dig = Curl_input_digest(conn, start);
if(CURLDIGEST_FINE == dig)
/* We act on it. Store our new url, which happens to be
the same one we already use! */
conn->newurl = strdup(data->change.url); /* clone string */
}
else
if(data->state.authwant & CURLAUTH_DIGEST) {
/* We don't know if Digest is what we're gonna use, but we
call this function anyway to store the digest data that
is provided on this line, to skip the extra round-trip
we need to do otherwise. We must sure to free this
data! */
Curl_input_digest(conn, start);
data->state.authavail |= CURLAUTH_DIGEST;
}
}
else if(checkprefix("Basic", start)) {
*availp |= CURLAUTH_BASIC;
if((data->state.authwant == CURLAUTH_BASIC) &&
(httpcode == data->state.authstage)) {
/* We asked for Basic authentication but got a 40X back
anyway, which basicly means our name+password isn't
valid. */
data->state.authavail = CURLAUTH_NONE;
infof(data, "Authentication problem. Ignoring this.\n");
}
else if(data->state.authwant & CURLAUTH_BASIC) {
data->state.authavail |= CURLAUTH_BASIC;
}
}
return CURLE_OK;
}
Daniel Stenberg
committed
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
/**
* determine whether an http response has gotten us into an
* error state or not.
*
* @param conn all information about the current connection
*
* @retval 0 communications should continue
*
* @retval 1 communications should not continue
*/
int Curl_http_should_fail(struct connectdata *conn)
{
struct SessionHandle *data;
struct Curl_transfer_keeper *k;
curlassert(conn);
data = conn->data;
curlassert(data);
/*
** For readability
*/
k = &conn->keep;
/*
** If we haven't been asked to fail on error,
** don't fail.
*/
if (!data->set.http_fail_on_error)
return 0;
/*
** Any code < 400 is never terminal.
*/
if (k->httpcode < 400)
return 0;
/*
** Any code >= 400 that's not 401 or 407 is always
** a terminal error
*/
if ((k->httpcode != 401) &&
(k->httpcode != 407))
return 1;
/*
** All we have left to deal with is 401 and 407
*/
curlassert((k->httpcode == 401) || (k->httpcode == 407));
/*
** Examine the current authentication state to see if this
** is an error. The idea is for this function to get
** called after processing all the headers in a response
** message. So, if we've been to asked to authenticate a
** particular stage, and we've done it, we're OK. But, if
** we're already completely authenticated, it's not OK to
** get another 401 or 407.
**
** It is possible for authentication to go stale such that
** the client needs to reauthenticate. Once that info is
** available, use it here.
*/
infof(data,"%s: authstage = %d\n",__FUNCTION__,data->state.authstage);
infof(data,"%s: httpcode = %d\n",__FUNCTION__,k->httpcode);
infof(data,"%s: authdone = %d\n",__FUNCTION__,data->state.authdone);
if (data->state.authstage &&
(data->state.authstage == k->httpcode))
return data->state.authdone;
/*
** Either we're not authenticating, or we're supposed to
** be authenticating something else. This is an error.
*/
return 1;
}
Daniel Stenberg
committed
/* fread() emulation to provide POST and/or request data */
static size_t readmoredata(char *buffer,
size_t size,
size_t nitems,
void *userp)
Daniel Stenberg
committed
{
struct connectdata *conn = (struct connectdata *)userp;
struct HTTP *http = conn->proto.http;
size_t fullsize = size * nitems;
Daniel Stenberg
committed
if(0 == http->postsize)
/* nothing to return */
return 0;
/* make sure that a HTTP request is never sent away chunked! */
conn->bits.forbidchunk= (http->sending == HTTPSEND_REQUEST)?TRUE:FALSE;
if(http->postsize <= (curl_off_t)fullsize) {
memcpy(buffer, http->postdata, (size_t)http->postsize);
fullsize = (size_t)http->postsize;
Daniel Stenberg
committed
if(http->backup.postsize) {
/* move backup data into focus and continue on that */
http->postdata = http->backup.postdata;
http->postsize = http->backup.postsize;
conn->fread = http->backup.fread;
conn->fread_in = http->backup.fread_in;
http->sending++; /* move one step up */
http->backup.postsize=0;
}
else
http->postsize = 0;
return fullsize;
}
memcpy(buffer, http->postdata, fullsize);
http->postdata += fullsize;
http->postsize -= fullsize;
return fullsize;
}
/* ------------------------------------------------------------------------- */
/*
* The add_buffer series of functions are used to build one large memory chunk
* from repeated function invokes. Used so that the entire HTTP request can
* be sent in one go.
*/
Daniel Stenberg
committed
struct send_buffer {
char *buffer;
size_t size_max;
size_t size_used;
};
typedef struct send_buffer send_buffer;
static CURLcode
add_buffer(send_buffer *in, const void *inptr, size_t size);
/*
* add_buffer_init() returns a fine buffer struct
*/
static
send_buffer *add_buffer_init(void)
{
send_buffer *blonk;
blonk=(send_buffer *)malloc(sizeof(send_buffer));
if(blonk) {
memset(blonk, 0, sizeof(send_buffer));
return blonk;
}
return NULL; /* failed, go home */
}
/*
* add_buffer_send() sends a buffer and frees all associated memory.
*/
static
CURLcode add_buffer_send(send_buffer *in,
struct connectdata *conn,
long *bytes_written) /* add the number of sent
bytes to this counter */
ssize_t amount;
CURLcode res;
char *ptr;
Daniel Stenberg
committed
struct HTTP *http = conn->proto.http;
curl_socket_t sockfd = conn->sock[FIRSTSOCKET];
Daniel Stenberg
committed
/* The looping below is required since we use non-blocking sockets, but due
to the circumstances we will just loop and try again and again etc */
ptr = in->buffer;
size = in->size_used;
if(conn->protocol & PROT_HTTPS) {
/* We never send more than CURL_MAX_WRITE_SIZE bytes in one single chunk
when we speak HTTPS, as if only a fraction of it is sent now, this data
needs to fit into the normal read-callback buffer later on and that
buffer is using this size.
*/
sendsize= (size > CURL_MAX_WRITE_SIZE)?CURL_MAX_WRITE_SIZE:size;
/* OpenSSL is very picky and we must send the SAME buffer pointer to the
library when we attempt to re-send this buffer. Sending the same data
is not enough, we must use the exact same address. For this reason, we
must copy the data to the uploadbuffer first, since that is the buffer
we will be using if this send is retried later.
*/
memcpy(conn->data->state.uploadbuffer, ptr, sendsize);
ptr = conn->data->state.uploadbuffer;
}
else
sendsize = size;
res = Curl_write(conn, sockfd, ptr, sendsize, &amount);
Daniel Stenberg
committed
if(CURLE_OK == res) {
if(conn->data->set.verbose)
/* this data _may_ contain binary stuff */
Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount);
*bytes_written += amount;
Daniel Stenberg
committed
if((size_t)amount != size) {
Daniel Stenberg
committed
/* The whole request could not be sent in one system call. We must queue
it up and send it later when we get the chance. We must not loop here
and wait until it might work again. */
ptr = in->buffer + amount;
Daniel Stenberg
committed
/* backup the currently set pointers */
http->backup.fread = conn->fread;
http->backup.fread_in = conn->fread_in;
http->backup.postdata = http->postdata;
http->backup.postsize = http->postsize;
/* set the new pointers for the request-sending */
conn->fread = (curl_read_callback)readmoredata;
conn->fread_in = (void *)conn;
http->postdata = ptr;
http->postsize = size;
http->send_buffer = in;
http->sending = HTTPSEND_REQUEST;
return CURLE_OK;
}
http->sending = HTTPSEND_BODY;
Daniel Stenberg
committed
/* the full buffer was sent, clean up and return */
}
if(in->buffer)
free(in->buffer);
free(in);
return res;
}
/*
* add_bufferf() builds a buffer from the formatted input
*/
static
CURLcode add_bufferf(send_buffer *in, const char *fmt, ...)
{
char *s;
va_list ap;
va_start(ap, fmt);
s = vaprintf(fmt, ap); /* this allocs a new string to append */
va_end(ap);
if(s) {
CURLcode result = add_buffer(in, s, strlen(s));
free(s);
if(CURLE_OK == result)
return CURLE_OK;
/* If we failed, we cleanup the whole buffer and return error */
if(in->buffer)
free(in->buffer);
free(in);
return CURLE_OUT_OF_MEMORY;
}
/*
* add_buffer() appends a memory chunk to the existing one
*/
static
CURLcode add_buffer(send_buffer *in, const void *inptr, size_t size)
{
char *new_rb;
if(!in->buffer ||
((in->size_used + size) > (in->size_max - 1))) {
new_size = (in->size_used+size)*2;
if(in->buffer)
/* we have a buffer, enlarge the existing one */
new_rb = (char *)realloc(in->buffer, new_size);
else
/* create a new buffer */
new_rb = (char *)malloc(new_size);
if(!new_rb)
return CURLE_OUT_OF_MEMORY;
in->buffer = new_rb;
in->size_max = new_size;
memcpy(&in->buffer[in->size_used], inptr, size);
in->size_used += size;
return CURLE_OK;
}
/* end of the add_buffer functions */
/* ------------------------------------------------------------------------- */
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
/*
* Curl_compareheader()
*
* Returns TRUE if 'headerline' contains the 'header' with given 'content'.
* Pass headers WITH the colon.
*/
bool
Curl_compareheader(char *headerline, /* line to check */
const char *header, /* header keyword _with_ colon */
const char *content) /* content string to find */
{
/* RFC2616, section 4.2 says: "Each header field consists of a name followed
* by a colon (":") and the field value. Field names are case-insensitive.
* The field value MAY be preceded by any amount of LWS, though a single SP
* is preferred." */
size_t hlen = strlen(header);
size_t clen;
size_t len;
char *start;
char *end;
if(!strnequal(headerline, header, hlen))
return FALSE; /* doesn't start with header */
/* pass the header */
start = &headerline[hlen];
/* pass all white spaces */
while(*start && isspace((int)*start))
start++;
/* find the end of the header line */
end = strchr(start, '\r'); /* lines end with CRLF */
if(!end) {
/* in case there's a non-standard compliant line here */
end = strchr(start, '\n');
if(!end)
/* hm, there's no line ending here, use the zero byte! */
end = strchr(start, '\0');
}
len = end-start; /* length of the content part of the input line */
clen = strlen(content); /* length of the word to find */
/* find the content string in the rest of the line */
for(;len>=clen;len--, start++) {
if(strnequal(start, content, clen))
return TRUE; /* match! */
}
return FALSE; /* no match */
}
* ConnectHTTPProxyTunnel() requires that we're connected to a HTTP proxy. This
* function will issue the necessary commands to get a seamless tunnel through
* this proxy. After that, the socket can be used just as a normal socket.
*/
CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
Daniel Stenberg
committed
int sockindex,
char *hostname,
int remote_port)
int httpcode=0;
Daniel Stenberg
committed
struct SessionHandle *data=conn->data;
Daniel Stenberg
committed
CURLcode result;
int res;
size_t nread; /* total size read */
int perline; /* count bytes per line */
bool keepon=TRUE;
ssize_t gotbytes;
char *ptr;
long timeout = 3600; /* default timeout in seconds */
struct timeval interval;
fd_set rkeepfd;
fd_set readfd;
char *line_start;
char *host_port;
curl_socket_t tunnelsocket = conn->sock[sockindex];
#define SELECT_OK 0
#define SELECT_ERROR 1
#define SELECT_TIMEOUT 2
int error = SELECT_OK;
infof(data, "Establish HTTP proxy tunnel to %s:%d\n", hostname, remote_port);
do {
if(conn->newurl) {
/* This only happens if we've looped here due to authentication reasons,
and we don't really use the newly cloned URL here then. Just free()
it. */
free(conn->newurl);
conn->newurl = NULL;
}
host_port = aprintf("%s:%d", hostname, remote_port);
if(!host_port)
return CURLE_OUT_OF_MEMORY;
/* Setup the proxy-authorization header, if any */
Daniel Stenberg
committed
result = http_auth_headers(conn, (char *)"CONNECT", host_port);
if(CURLE_OK == result) {
/* OK, now send the connect request to the proxy */
result =
Curl_sendf(tunnelsocket, conn,
"CONNECT %s:%d HTTP/1.0\015\012"
"%s"
"%s"
"\r\n",
hostname, remote_port,
conn->bits.proxy_user_passwd?
conn->allocptr.proxyuserpwd:"",
data->set.useragent?conn->allocptr.uagent:""
);
if(result)
failf(data, "Failed sending CONNECT to proxy");
free(host_port);
if(result)
return result;
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
FD_ZERO (&readfd); /* clear it */
FD_SET (tunnelsocket, &readfd); /* read socket */
/* get this in a backup variable to be able to restore it on each lap in
the select() loop */
rkeepfd = readfd;
ptr=data->state.buffer;
line_start = ptr;
nread=0;
perline=0;
keepon=TRUE;
while((nread<BUFSIZE) && (keepon && !error)) {
readfd = rkeepfd; /* set every lap */
interval.tv_sec = 1; /* timeout each second and check the timeout */
interval.tv_usec = 0;
if(data->set.timeout) {
/* if timeout is requested, find out how much remaining time we have */
timeout = data->set.timeout - /* timeout time */
Curl_tvdiff(Curl_tvnow(), conn->now)/1000; /* spent time */
if(timeout <=0 ) {
failf(data, "Proxy connection aborted due to timeout");
error = SELECT_TIMEOUT; /* already too little time */
break;
}
}
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
switch (select (tunnelsocket+1, &readfd, NULL, NULL, &interval)) {
case -1: /* select() error, stop reading */
error = SELECT_ERROR;
failf(data, "Proxy CONNECT aborted due to select() error");
break;
case 0: /* timeout */
break;
default:
/*
* This code previously didn't use the kerberos sec_read() code
* to read, but when we use Curl_read() it may do so. Do confirm
* that this is still ok and then remove this comment!
*/
res= Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread, &gotbytes);
if(res< 0)
/* EWOULDBLOCK */
continue; /* go loop yourself */
else if(res)
keepon = FALSE;
else if(gotbytes <= 0) {
keepon = FALSE;
error = SELECT_ERROR;
failf(data, "Proxy CONNECT aborted");
}
else {
/*
* We got a whole chunk of data, which can be anything from one byte
* to a set of lines and possibly just a piece of the last line.
*
* TODO: To make this code work less error-prone, we need to make
* sure that we read and create full lines before we compare them,
* as there is really nothing that stops the proxy from delivering
* the response lines in multiple parts, each part consisting of
* only a little piece of the line(s). */
int i;
nread += gotbytes;
for(i = 0; i < gotbytes; ptr++, i++) {
perline++; /* amount of bytes in this line so far */
if(*ptr=='\n') {
char letter;
int writetype;
/* output debug output if that is requested */
if(data->set.verbose)
Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline);
/* send the header to the callback */
writetype = CLIENTWRITE_HEADER;
if(data->set.http_include_header)
writetype |= CLIENTWRITE_BODY;
result = Curl_client_write(data, writetype, line_start, perline);
if(result)
return result;
/* Newlines are CRLF, so the CR is ignored as the line isn't
really terminated until the LF comes. Treat a following CR
as end-of-headers as well.*/
if(('\r' == line_start[0]) ||
('\n' == line_start[0])) {
/* end of response-headers from the proxy */
keepon=FALSE;
break; /* breaks out of for-loop, not switch() */
}
/* keep a backup of the position we are about to blank */
letter = line_start[perline];
line_start[perline]=0; /* zero terminate the buffer */
if((checkprefix("WWW-Authenticate:", line_start) &&
(401 == httpcode)) ||
(checkprefix("Proxy-authenticate:", line_start) &&
(407 == httpcode))) {
result = Curl_http_auth(conn, httpcode, line_start);
if(result)
return result;
}
else if(2 == sscanf(line_start, "HTTP/1.%d %d",
&subversion,
&httpcode)) {
/* store the HTTP code */
data->info.httpproxycode = httpcode;
}
/* put back the letter we blanked out before */
line_start[perline]= letter;
perline=0; /* line starts over here */
line_start = ptr+1; /* this skips the zero byte we wrote */
}
}
}
break;
} /* switch */
} /* while there's buffer left and loop is requested */
if(error)
return CURLE_RECV_ERROR;
/* Deal with the possibly already received authenticate headers. 'newurl'
is set to a new URL if we must loop. */
Curl_http_auth_act(conn);
} while(conn->newurl);
if(200 != httpcode) {
failf(data, "Received HTTP code %d from proxy after CONNECT", httpcode);
return CURLE_RECV_ERROR;
Daniel Stenberg
committed
/* If a proxy-authorization header was used for the proxy, then we should
make sure that it isn't accidentally used for the document request
after we've connected. So let's free and clear it here. */
Curl_safefree(conn->allocptr.proxyuserpwd);
conn->allocptr.proxyuserpwd = NULL;
Curl_http_auth_stage(data, 401); /* move on to the host auth */
infof (data, "Proxy replied OK to CONNECT request\n");
return CURLE_OK;
}
/*
* HTTP stuff to do at connect-time.
*/
CURLcode Curl_http_connect(struct connectdata *conn)
Daniel Stenberg
committed
struct SessionHandle *data;
data=conn->data;
/* If we are not using a proxy and we want a secure connection,
* perform SSL initialization & connection now.
* If using a proxy with https, then we must tell the proxy to CONNECT
* us to the host we want to talk to. Only after the connect
* has occured, can we start talking SSL
*/
Daniel Stenberg
committed
if(conn->bits.httpproxy &&
((conn->protocol & PROT_HTTPS) || data->set.tunnel_thru_httpproxy)) {
/* either HTTPS over proxy, OR explicitly asked for a tunnel */
Daniel Stenberg
committed
result = Curl_ConnectHTTPProxyTunnel(conn, FIRSTSOCKET,
conn->hostname, conn->remote_port);
if(CURLE_OK != result)
return result;
}
if(conn->protocol & PROT_HTTPS) {
/* now, perform the SSL initialization for this socket */
Daniel Stenberg
committed
result = Curl_SSLConnect(conn, FIRSTSOCKET);
if(result)
return result;
Daniel Stenberg
committed
if(conn->bits.user_passwd && !data->state.this_is_a_follow) {
/* Authorization: is requested, this is not a followed location, get the
original host name */
if (data->state.auth_host)
/* Free to avoid leaking memory on multiple requests*/
free(data->state.auth_host);
Daniel Stenberg
committed
data->state.auth_host = strdup(conn->hostname);
Daniel Stenberg
committed
Daniel Stenberg
committed
CURLcode Curl_http_done(struct connectdata *conn)
Daniel Stenberg
committed
struct SessionHandle *data;
struct HTTP *http;
data=conn->data;
/* set the proper values (possibly modified on POST) */
conn->fread = data->set.fread; /* restore */
conn->fread_in = data->set.in; /* restore */
if (http == NULL)
return CURLE_OK;
Daniel Stenberg
committed
if(http->send_buffer) {
send_buffer *buff = http->send_buffer;
free(buff->buffer);
free(buff);
http->send_buffer = NULL; /* cleaer the pointer */
Daniel Stenberg
committed
}
Daniel Stenberg
committed
if(HTTPREQ_POST_FORM == data->set.httpreq) {
conn->bytecount = http->readbytecount + http->writebytecount;
Curl_formclean(http->sendit); /* Now free that whole lot */
else if(HTTPREQ_PUT == data->set.httpreq)
conn->bytecount = http->readbytecount + http->writebytecount;
if(!conn->bits.retry &&
!(http->readbytecount + conn->headerbytecount)) {
/* If this connection isn't simply closed to be retried, AND nothing was
read from the HTTP server, this can't be right so we return an error
here */
failf(data, "Empty reply from server");
Daniel Stenberg
committed
return CURLE_GOT_NOTHING;
}
void Curl_http_auth_stage(struct SessionHandle *data,
int stage)
{
curlassert((stage == 401) || (stage == 407));
/* We set none, one or more bits for which authentication types we accept
for this stage. */
data->state.authwant = (stage == 401)?
data->set.httpauth:data->set.proxyauth;
data->state.authstage = stage;
data->state.authavail = CURLAUTH_NONE; /* no type available yet */
}
CURLcode Curl_http(struct connectdata *conn)
Daniel Stenberg
committed
struct SessionHandle *data=conn->data;
char *buf = data->state.buffer; /* this is a short cut to the buffer */
CURLcode result=CURLE_OK;
struct HTTP *http;
struct Cookie *co=NULL; /* no cookies from start */
char *ppath = conn->ppath; /* three previous function arguments */
char *host = conn->name;
Daniel Stenberg
committed
const char *te = ""; /* tranfer-encoding */
char *ptr;
if(!conn->proto.http) {
/* Only allocate this struct if we don't already have it! */
http = (struct HTTP *)malloc(sizeof(struct HTTP));
if(!http)
return CURLE_OUT_OF_MEMORY;
memset(http, 0, sizeof(struct HTTP));
conn->proto.http = http;
}
else
http = conn->proto.http;
/* We default to persistant connections */
conn->bits.close = FALSE;
if ( (conn->protocol&(PROT_HTTP|PROT_FTP)) &&
Daniel Stenberg
committed
data->set.upload) {
data->set.httpreq = HTTPREQ_PUT;
request = data->set.customrequest?
data->set.customrequest:
(data->set.no_body?(char *)"HEAD":
((HTTPREQ_POST == data->set.httpreq) ||
(HTTPREQ_POST_FORM == data->set.httpreq))?(char *)"POST":
(HTTPREQ_PUT == data->set.httpreq)?(char *)"PUT":(char *)"GET");
/* The User-Agent string has been built in url.c already, because it might
have been used in the proxy connect, but if we have got a header with
the user-agent string specified, we erase the previously made string
if(checkheaders(data, "User-Agent:") && conn->allocptr.uagent) {
free(conn->allocptr.uagent);
conn->allocptr.uagent=NULL;
/* setup the authentication headers */
Daniel Stenberg
committed
result = http_auth_headers(conn, request, ppath);
if(result)
return result;
Daniel Stenberg
committed
Curl_safefree(conn->allocptr.ref);
if(data->change.referer && !checkheaders(data, "Referer:"))
Daniel Stenberg
committed
conn->allocptr.ref = aprintf("Referer: %s\015\012", data->change.referer);
Daniel Stenberg
committed
else
conn->allocptr.ref = NULL;
Curl_safefree(conn->allocptr.cookie);
if(data->set.cookie && !checkheaders(data, "Cookie:"))
Daniel Stenberg
committed
conn->allocptr.cookie = aprintf("Cookie: %s\015\012", data->set.cookie);
Daniel Stenberg
committed
else
conn->allocptr.cookie = NULL;
if(!conn->bits.upload_chunky && (data->set.httpreq != HTTPREQ_GET)) {
/* not a chunky transfer yet, but data is to be sent */
ptr = checkheaders(data, "Transfer-Encoding:");
if(ptr) {
/* Some kind of TE is requested, check if 'chunked' is chosen */
conn->bits.upload_chunky =
Curl_compareheader(ptr, "Transfer-Encoding:", "chunked");
te = "";
}
}
else if(conn->bits.upload_chunky) {
/* RFC2616 section 4.4:
Messages MUST NOT include both a Content-Length header field and a
non-identity transfer-coding. If the message does include a non-
identity transfer-coding, the Content-Length MUST be ignored. */
Daniel Stenberg
committed
if(!checkheaders(data, "Transfer-Encoding:")) {
te = "Transfer-Encoding: chunked\r\n";
}
else {
te = "";
conn->bits.upload_chunky = FALSE; /* transfer-encoding was disabled,
so don't chunkify this! */
}
Daniel Stenberg
committed
}
ptr = checkheaders(data, "Host:");
if(ptr && !data->state.this_is_a_follow) {
/* If we have a given custom Host: header, we extract the host name in
order to possibly use it for cookie reasons later on. We only allow the
custom Host: header if this is NOT a redirect, as setting Host: in the
redirected request is being out on thin ice. */
char *start = ptr+strlen("Host:");
while(*start && isspace((int)*start ))
start++;
ptr = start; /* start host-scanning here */
/* scan through the string to find the end (space or colon) */
while(*ptr && !isspace((int)*ptr) && !(':'==*ptr))
ptr++;
if(ptr != start) {
conn->allocptr.cookiehost = malloc(len+1);
if(!conn->allocptr.cookiehost)
return CURLE_OUT_OF_MEMORY;
memcpy(conn->allocptr.cookiehost, start, len);
conn->allocptr.cookiehost[len]=0;
}
}
else {
Curl_safefree(conn->allocptr.host);
/* When building Host: headers, we must put the host name within
[brackets] if the host name is a plain IPv6-address. RFC2732-style. */
if(((conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTPS)) ||
(!(conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTP)) )
/* If (HTTPS on port 443) OR (non-HTTPS on port 80) then don't include
the port number in the host string */
conn->allocptr.host = aprintf("Host: %s%s%s\r\n",
conn->bits.ipv6_ip?"[":"",
host,
conn->bits.ipv6_ip?"]":"");
conn->allocptr.host = aprintf("Host: %s%s%s:%d\r\n",
conn->bits.ipv6_ip?"[":"",
host,
conn->bits.ipv6_ip?"]":"",
conn->remote_port);
if(!conn->allocptr.host)
/* without Host: we can't make a nice request */
return CURLE_OUT_OF_MEMORY;
if(data->cookies) {
Daniel Stenberg
committed
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
co = Curl_cookie_getlist(data->cookies,
conn->allocptr.cookiehost?
conn->allocptr.cookiehost:host, ppath,
(bool)(conn->protocol&PROT_HTTPS?TRUE:FALSE));
Daniel Stenberg
committed
Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
}
Daniel Stenberg
committed
if (conn->bits.httpproxy &&
!data->set.tunnel_thru_httpproxy &&
!(conn->protocol&PROT_HTTPS)) {
/* The path sent to the proxy is in fact the entire URL */
ppath = data->change.url;
}
if(HTTPREQ_POST_FORM == data->set.httpreq) {
/* we must build the whole darned post sequence first, so that we have
a size of the whole shebang before we start to send it */
result = Curl_getFormData(&http->sendit, data->set.httppost,
&http->postsize);
if(CURLE_OK != result) {
/* Curl_getFormData() doesn't use failf() */
failf(data, "failed creating formpost data");
return result;
}
}
http->p_pragma = "Pragma: no-cache\r\n";
http->p_accept = "Accept: */*\r\n";
Daniel Stenberg
committed
if(( (HTTPREQ_POST == data->set.httpreq) ||
(HTTPREQ_POST_FORM == data->set.httpreq) ||
(HTTPREQ_PUT == data->set.httpreq) ) &&
conn->resume_from) {
/**********************************************************************
* Resuming upload in HTTP means that we PUT or POST and that we have
* got a resume_from value set. The resume value has already created
* a Range: header that will be passed along. We need to "fast forward"
* the file the given number of bytes and decrease the assume upload
* file size before we continue this venture in the dark lands of HTTP.
*********************************************************************/
if(conn->resume_from < 0 ) {
/*
* This is meant to get the size of the present remote-file by itself.
* We don't support this now. Bail out!
*/
conn->resume_from = 0;
if(conn->resume_from) {
/* do we still game? */
/* Now, let's read off the proper amount of bytes from the
input. If we knew it was a proper file we could've just
fseek()ed but we only have a stream here */
do {
size_t readthisamountnow = (size_t)(conn->resume_from - passed);
if(readthisamountnow > BUFSIZE)
readthisamountnow = BUFSIZE;
actuallyread =
data->set.fread(data->state.buffer, 1, (size_t)readthisamountnow,
Daniel Stenberg
committed
data->set.in);
passed += actuallyread;
if(actuallyread != readthisamountnow) {
Daniel Stenberg
committed
failf(data, "Could only read %" FORMAT_OFF_T
" bytes from the input",
passed);
return CURLE_READ_ERROR;
}
} while(passed != conn->resume_from); /* loop until done */
/* now, decrease the size of the read */
Daniel Stenberg
committed
if(data->set.infilesize>0) {
data->set.infilesize -= conn->resume_from;
Daniel Stenberg
committed
if(data->set.infilesize <= 0) {
failf(data, "File already completely uploaded");
return CURLE_PARTIAL_FILE;
}
}
/* we've passed, proceed as normal */
}
}
if(conn->bits.use_range) {
/*
* A range is selected. We use different headers whether we're downloading
* or uploading and we always let customized headers override our internal
* ones if any such are specified.
*/
Daniel Stenberg
committed
if((data->set.httpreq == HTTPREQ_GET) &&
!checkheaders(data, "Range:")) {
/* if a line like this was already allocated, free the previous one */
if(conn->allocptr.rangeline)
free(conn->allocptr.rangeline);
conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", conn->range);
}
Daniel Stenberg
committed
else if((data->set.httpreq != HTTPREQ_GET) &&
!checkheaders(data, "Content-Range:")) {
if(conn->resume_from) {
/* This is because "resume" was selected */
curl_off_t total_expected_size=
conn->resume_from + data->set.infilesize;
Daniel Stenberg
committed
aprintf("Content-Range: bytes %s%" FORMAT_OFF_T
"/%" FORMAT_OFF_T "\r\n",
conn->range, total_expected_size-1,
total_expected_size);
}
else {
/* Range was selected and then we just pass the incoming range and
append total size */
Daniel Stenberg
committed
aprintf("Content-Range: bytes %s/%" FORMAT_OFF_T "\r\n",
conn->range, data->set.infilesize);
}
}
}
Daniel Stenberg
committed
{
/* Use 1.1 unless the use specificly asked for 1.0 */
const char *httpstring=
data->set.httpversion==CURL_HTTP_VERSION_1_0?"1.0":"1.1";
Daniel Stenberg
committed
send_buffer *req_buffer;
Daniel Stenberg
committed
struct curl_slist *headers=data->set.headers;
curl_off_t postsize; /* off_t type to be able to hold a large file size */
Daniel Stenberg
committed
/* initialize a dynamic send-buffer */
req_buffer = add_buffer_init();
if(!req_buffer)
return CURLE_OUT_OF_MEMORY;
Daniel Stenberg
committed
/* add the main request stuff */
result =
add_bufferf(req_buffer,
"%s " /* GET/HEAD/POST/PUT */
"%s HTTP/%s\r\n" /* path + HTTP version */
"%s" /* proxyuserpwd */
"%s" /* userpwd */
"%s" /* range */
"%s" /* user agent */
"%s" /* cookie */
"%s" /* host */
"%s" /* pragma */
"%s" /* accept */
"%s" /* accept-encoding */
"%s" /* referer */
"%s",/* transfer-encoding */
Daniel Stenberg
committed
request,
ppath,
httpstring,
Daniel Stenberg
committed
(conn->bits.httpproxy && conn->allocptr.proxyuserpwd)?
conn->allocptr.proxyuserpwd:"",
conn->allocptr.userpwd?conn->allocptr.userpwd:"",
Loading
Loading full blame...