ftp.c

        continue;
      }

      if (listen(portsock, 1) < 0) {
        sclose(portsock);
        portsock = -1;
        continue;
      }

      break;
    }
    if (portsock < 0) {
      failf(data, strerror(errno));
      freeaddrinfo(res);
      return CURLE_FTP_PORT_FAILED;
    }

    sslen = sizeof(ss);
    if (getsockname(portsock, sa, &sslen) < 0) {
      failf(data, strerror(errno));
      freeaddrinfo(res);
      return CURLE_FTP_PORT_FAILED;
    }

    for (modep = (char **)mode; modep && *modep; modep++) {
      int lprtaf, eprtaf;

      switch (sa->sa_family) {
      case AF_INET:
        ap = (unsigned char *)&((struct sockaddr_in *)&ss)->sin_addr;
        alen = sizeof(((struct sockaddr_in *)&ss)->sin_addr);
        pp = (unsigned char *)&((struct sockaddr_in *)&ss)->sin_port;
        plen = sizeof(((struct sockaddr_in *)&ss)->sin_port);
        lprtaf = 4;
        eprtaf = 1;
        break;
      case AF_INET6:
        ap = (unsigned char *)&((struct sockaddr_in6 *)&ss)->sin6_addr;
        alen = sizeof(((struct sockaddr_in6 *)&ss)->sin6_addr);
        pp = (unsigned char *)&((struct sockaddr_in6 *)&ss)->sin6_port;
        plen = sizeof(((struct sockaddr_in6 *)&ss)->sin6_port);
        lprtaf = 6;
        eprtaf = 2;
        break;
      default:
        ap = pp = NULL;
        lprtaf = eprtaf = -1;
        break;
      }

      if (strcmp(*modep, "EPRT") == 0) {
        if (eprtaf < 0)
          continue;
        if (getnameinfo((struct sockaddr *)&ss, sslen,
                         portmsgbuf, sizeof(portmsgbuf), tmp, sizeof(tmp), niflags))
          continue;

        /* do not transmit IPv6 scope identifier to the wire */
      	if (sa->sa_family == AF_INET6) {
          char *q = strchr(portmsgbuf, '%');
          if (q)
            *q = '\0';
        }

        ftpsendf(conn->firstsocket, conn, "%s |%d|%s|%s|", *modep, eprtaf,
                 portmsgbuf, tmp);
      } else if (strcmp(*modep, "LPRT") == 0 ||
                 strcmp(*modep, "PORT") == 0) {
        int i;

        if (strcmp(*modep, "LPRT") == 0 && lprtaf < 0)
          continue;
        if (strcmp(*modep, "PORT") == 0 && sa->sa_family != AF_INET)
          continue;

        portmsgbuf[0] = '\0';
        if (strcmp(*modep, "LPRT") == 0) {
          snprintf(tmp, sizeof(tmp), "%d,%d", lprtaf, alen);
          if (strlcat(portmsgbuf, tmp, sizeof(portmsgbuf)) >= sizeof(portmsgbuf)) {
            continue;
          }
        }

        for (i = 0; i < alen; i++) {
          if (portmsgbuf[0])
            snprintf(tmp, sizeof(tmp), ",%u", ap[i]);
          else
            snprintf(tmp, sizeof(tmp), "%u", ap[i]);

          if (strlcat(portmsgbuf, tmp, sizeof(portmsgbuf)) >= sizeof(portmsgbuf)) {
            continue;
          }
        }

        if (strcmp(*modep, "LPRT") == 0) {
          snprintf(tmp, sizeof(tmp), ",%d", plen);

          if (strlcat(portmsgbuf, tmp, sizeof(portmsgbuf)) >= sizeof(portmsgbuf))
            continue;
        }

        for (i = 0; i < plen; i++) {
          snprintf(tmp, sizeof(tmp), ",%u", pp[i]);

          if (strlcat(portmsgbuf, tmp, sizeof(portmsgbuf)) >= sizeof(portmsgbuf)) {
              continue;
          }
        }

        ftpsendf(conn->firstsocket, conn, "%s %s", *modep, portmsgbuf);
      }

      nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
      if(nread < 0)
        return CURLE_OPERATION_TIMEOUTED;

      if (ftpcode != 200) {
        failf(data, "Server does not grok %s", *modep);
        continue;
      } else
        break;
    }

    if (!*modep) {
      sclose(portsock);
      freeaddrinfo(res);
      return CURLE_FTP_PORT_FAILED;
    }
    /* we set the secondary socket variable to this for now, it
       is only so that the cleanup function will close it in case
       we fail before the true secondary stuff is made */
    conn->secondarysocket = portsock;

#else
    struct sockaddr_in sa;
    struct hostent *h=NULL;
    char *hostdataptr=NULL;
    size_t size;
    unsigned short porttouse;
    char myhost[256] = "";

    if(data->set.ftpport) {
      if(Curl_if2ip(data->set.ftpport, myhost, sizeof(myhost))) {
        h = Curl_getaddrinfo(data, myhost, 0, &hostdataptr);
      }
      else {
        if(strlen(data->set.ftpport)>1)
          h = Curl_getaddrinfo(data, data->set.ftpport, 0, &hostdataptr);
        if(h)
          strcpy(myhost, data->set.ftpport); /* buffer overflow risk */
      }
    }
    if(! *myhost) {
      h=Curl_getaddrinfo(data,
                         getmyhost(myhost, sizeof(myhost)),
                         0, &hostdataptr);
    }
    infof(data, "We connect from %s\n", myhost);

    if ( h ) {
      if( (portsock = socket(AF_INET, SOCK_STREAM, 0)) >= 0 ) {

        /* we set the secondary socket variable to this for now, it
           is only so that the cleanup function will close it in case
           we fail before the true secondary stuff is made */
        conn->secondarysocket = portsock;

        memset((char *)&sa, 0, sizeof(sa));
        memcpy((char *)&sa.sin_addr,
               h->h_addr,
               h->h_length);
        sa.sin_family = AF_INET;
        sa.sin_addr.s_addr = INADDR_ANY;
        sa.sin_port = 0;
        size = sizeof(sa);

        if(bind(portsock, (struct sockaddr *)&sa, size) >= 0) {
          /* we succeeded to bind */
          struct sockaddr_in add;
          size = sizeof(add);

          if(getsockname(portsock, (struct sockaddr *) &add,
                         (socklen_t *)&size)<0) {
            failf(data, "getsockname() failed");
            return CURLE_FTP_PORT_FAILED;
          }
          porttouse = ntohs(add.sin_port);

          if ( listen(portsock, 1) < 0 ) {
            failf(data, "listen(2) failed on socket");
            free(hostdataptr);
            return CURLE_FTP_PORT_FAILED;
          }
        }
        else {
          failf(data, "bind(2) failed on socket");
          free(hostdataptr);
          return CURLE_FTP_PORT_FAILED;
        }
      }
      else {
        failf(data, "socket(2) failed (%s)");
        free(hostdataptr);
        return CURLE_FTP_PORT_FAILED;
      }
      if(hostdataptr)
        /* free the memory used for name lookup */
        free(hostdataptr);
    }
    else {
      failf(data, "could't find my own IP address (%s)", myhost);
      return CURLE_FTP_PORT_FAILED;
    }
    {
      struct in_addr in;
      unsigned short ip[5];
      (void) memcpy(&in.s_addr, *h->h_addr_list, sizeof (in.s_addr));
#if defined (HAVE_INET_NTOA_R)
      /* ignore the return code from inet_ntoa_r() as it is int or
         char * depending on system */
      inet_ntoa_r(in, ntoa_buf, sizeof(ntoa_buf));
      sscanf( ntoa_buf, "%hu.%hu.%hu.%hu",
              &ip[0], &ip[1], &ip[2], &ip[3]);
#else
      sscanf( inet_ntoa(in), "%hu.%hu.%hu.%hu",
              &ip[0], &ip[1], &ip[2], &ip[3]);
#endif
      ftpsendf(conn->firstsocket, conn, "PORT %d,%d,%d,%d,%d,%d",
            ip[0], ip[1], ip[2], ip[3],
            porttouse >> 8,
            porttouse & 255);
    }

    nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
    if(nread < 0)
      return CURLE_OPERATION_TIMEOUTED;

    if(ftpcode != 200) {
      failf(data, "Server does not grok PORT, try without it!");
      return CURLE_FTP_PORT_FAILED;
    }     
#endif /* ENABLE_IPV6 */
  }
  else { /* we use the PASV command */
#if 0
    /* no support for IPv6 passive mode yet */
    char *mode[] = { "EPSV", "LPSV", "PASV", NULL };
    int results[] = { 229, 228, 227, 0 };
#else
    const char *mode[] = { "PASV", NULL };
    int results[] = { 227, 0 };
#endif
    int modeoff;

    for (modeoff = 0; mode[modeoff]; modeoff++) {
      ftpsendf(conn->firstsocket, conn, mode[modeoff]);
      nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
      if(nread < 0)
        return CURLE_OPERATION_TIMEOUTED;

      if (ftpcode == results[modeoff])
        break;
    }

    if (!mode[modeoff]) {
      failf(data, "Odd return code after PASV");
      return CURLE_FTP_WEIRD_PASV_REPLY;
    }
    else if (strcmp(mode[modeoff], "PASV") == 0) {
      int ip[4];
      int port[2];
      unsigned short newport; /* remote port, not necessary the local one */
      unsigned short connectport; /* the local port connect() should use! */
      char newhost[32];

      Curl_addrinfo *addr;
      char *hostdataptr=NULL;

#ifndef ENABLE_IPV6
      char *ip_addr;
#else
      struct addrinfo *ai;
#endif
      char *str=buf;

      /*
       * New 227-parser June 3rd 1999.
       * It now scans for a sequence of six comma-separated numbers and
       * will take them as IP+port indicators.
       *
       * Found reply-strings include:
       * "227 Entering Passive Mode (127,0,0,1,4,51)"
       * "227 Data transfer will passively listen to 127,0,0,1,4,51"
       * "227 Entering passive mode. 127,0,0,1,4,51"
       */
      
      while(*str) {
	      if (6 == sscanf(str, "%d,%d,%d,%d,%d,%d",
                        &ip[0], &ip[1], &ip[2], &ip[3],
                        &port[0], &port[1]))
    	    break;
        str++;
      }

      if(!*str) {
        failf(data, "Couldn't interpret this 227-reply: %s", buf);
        return CURLE_FTP_WEIRD_227_FORMAT;
      }

      sprintf(newhost, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
      newport = (port[0]<<8) + port[1];
      if(data->change.proxy) {
        /*
         * This is a tunnel through a http proxy and we need to connect to the
         * proxy again here. We already have the name info for it since the
         * previous lookup.
         */
        addr = conn->hp;
        connectport =
          (unsigned short)conn->port; /* we connect to the proxy's port */
      }
      else {
        /* normal, direct, ftp connection */
        addr = Curl_getaddrinfo(data, newhost, newport, &hostdataptr);
        if(!addr) {
          failf(data, "Can't resolve new host %s", newhost);
          return CURLE_FTP_CANT_GET_HOST;
        }
        connectport = newport; /* we connect to the remote port */
      }
	
#ifdef ENABLE_IPV6
      conn->secondarysocket = -1;
      for (ai = addr; ai; ai = ai->ai_next) {
        /* XXX for now, we can do IPv4 only */
        if (ai->ai_family != AF_INET)
          continue;

        conn->secondarysocket = socket(ai->ai_family, ai->ai_socktype,
                                       ai->ai_protocol);
        if (conn->secondarysocket < 0)
          continue;

        if (connect(conn->secondarysocket, ai->ai_addr, ai->ai_addrlen) < 0) {
          close(conn->secondarysocket);
          conn->secondarysocket = -1;
          continue;
        }

      	if(data->set.verbose)
          /* this just dumps information about this second connection */
          ftp_pasv_verbose(conn, ai);
      	break;
      }

      if (conn->secondarysocket < 0) {
        failf(data, strerror(errno));
        return CURLE_FTP_CANT_RECONNECT;
      }
#else
      /* IPv4 code */
      conn->secondarysocket = socket(AF_INET, SOCK_STREAM, 0);

      memset((char *) &serv_addr, '\0', sizeof(serv_addr));
      memcpy((char *)&(serv_addr.sin_addr), addr->h_addr, addr->h_length);
      serv_addr.sin_family = addr->h_addrtype;

      serv_addr.sin_port = htons(connectport);

      if(data->set.verbose)
        /* this just dumps information about this second connection */
        ftp_pasv_verbose(conn, newhost);
	
      if(hostdataptr)
        free(hostdataptr);

      if (connect(conn->secondarysocket, (struct sockaddr *) &serv_addr,
                  sizeof(serv_addr)) < 0) {
        switch(errno) {
#ifdef ECONNREFUSED
          /* this should be made nicer */
        case ECONNREFUSED:
          failf(data, "Connection refused by ftp server");
          break;
#endif
#ifdef EINTR
        case EINTR:
          failf(data, "Connection timed out to ftp server");
          break;
#endif
        default:
          failf(data, "Can't connect to ftp server");
          break;
        }
        return CURLE_FTP_CANT_RECONNECT;
      }
#endif /* end of IPv4-specific code*/

      if (data->set.tunnel_thru_httpproxy) {
        /* We want "seamless" FTP operations through HTTP proxy tunnel */
        result = Curl_ConnectHTTPProxyTunnel(conn, conn->secondarysocket,
                                             newhost, newport);
        if(CURLE_OK != result)
          return result;
      }
    } else {
      return CURLE_FTP_CANT_RECONNECT;
    }
  }
  /* we have the (new) data connection ready */
  infof(data, "Connected the data stream!\n");

  if(data->set.upload) {

    /* Set type to binary (unless specified ASCII) */
    result = _ftp_transfertype(conn, data->set.ftp_ascii);
    if(result)
      return result;

    if(conn->resume_from) {
      /* we're about to continue the uploading of a file */
      /* 1. get already existing file's size. We use the SIZE
         command for this which may not exist in the server!
         The SIZE command is not in RFC959. */

      /* 2. This used to set REST. But since we can do append, we
         don't another ftp command. We just skip the source file
         offset and then we APPEND the rest on the file instead */

      /* 3. pass file-size number of bytes in the source file */
      /* 4. lower the infilesize counter */
      /* => transfer as usual */

      if(conn->resume_from < 0 ) {
        /* we could've got a specified offset from the command line,
           but now we know we didn't */

        if(CURLE_OK != _ftp_getsize(conn, ftp->file, &conn->resume_from)) {
          failf(data, "Couldn't get remote file size");
          return CURLE_FTP_COULDNT_GET_SIZE;
        }
      }

      if(conn->resume_from) {
        /* do we still game? */
        int passed=0;
        /* enable append instead */
        data->set.ftp_append = 1;

        /* Now, let's read off the proper amount of bytes from the
           input. If we knew it was a proper file we could've just
           fseek()ed but we only have a stream here */
        do {
          int readthisamountnow = (conn->resume_from - passed);
          int actuallyread;

          if(readthisamountnow > BUFSIZE)
            readthisamountnow = BUFSIZE;

          actuallyread =
            data->set.fread(data->state.buffer, 1, readthisamountnow,
                            data->set.in);

          passed += actuallyread;
          if(actuallyread != readthisamountnow) {
            failf(data, "Could only read %d bytes from the input\n", passed);
            return CURLE_FTP_COULDNT_USE_REST;
          }
        }
        while(passed != conn->resume_from);

        /* now, decrease the size of the read */
        if(data->set.infilesize>0) {
          data->set.infilesize -= conn->resume_from;

          if(data->set.infilesize <= 0) {
            infof(data, "File already completely uploaded\n");

            /* no data to transfer */
            result=Curl_Transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
            
            /* Set resume done so that we won't get any error in
             * Curl_ftp_done() because we didn't transfer the amount of bytes
             * that the local file file obviously is */
            conn->bits.resume_done = TRUE; 

            return CURLE_OK;
          }
        }
        /* we've passed, proceed as normal */
      }
    }

    /* Send everything on data->set.in to the socket */
    if(data->set.ftp_append)
      /* we append onto the file instead of rewriting it */
      ftpsendf(conn->firstsocket, conn, "APPE %s", ftp->file);
    else
      ftpsendf(conn->firstsocket, conn, "STOR %s", ftp->file);

    nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
    if(nread < 0)
      return CURLE_OPERATION_TIMEOUTED;

    if(ftpcode>=400) {
      failf(data, "Failed FTP upload:%s", buf+3);
      /* oops, we never close the sockets! */
      return CURLE_FTP_COULDNT_STOR_FILE;
    }

    if(data->set.ftp_use_port) {
      /* PORT means we are now awaiting the server to connect to us. */
      result = AllowServerConnect(data, conn, portsock);
      if( result )
        return result;
    }

    *bytecountp=0;

    /* When we know we're uploading a specified file, we can get the file
       size prior to the actual upload. */

    Curl_pgrsSetUploadSize(data, data->set.infilesize);

    result = Curl_Transfer(conn, -1, -1, FALSE, NULL, /* no download */
                      conn->secondarysocket, bytecountp);
    if(result)
      return result;
      
  }
  else {
    /* Retrieve file or directory */
    bool dirlist=FALSE;
    long downloadsize=-1;

    if(conn->bits.use_range && conn->range) {
      long from, to;
      int totalsize=-1;
      char *ptr;
      char *ptr2;

      from=strtol(conn->range, &ptr, 0);
      while(ptr && *ptr && (isspace((int)*ptr) || (*ptr=='-')))
        ptr++;
      to=strtol(ptr, &ptr2, 0);
      if(ptr == ptr2) {
        /* we didn't get any digit */
        to=-1;
      }
      if((-1 == to) && (from>=0)) {
        /* X - */
        conn->resume_from = from;
        infof(data, "FTP RANGE %d to end of file\n", from);
      }
      else if(from < 0) {
        /* -Y */
        totalsize = -from;
        conn->maxdownload = -from;
        conn->resume_from = from;
        infof(data, "FTP RANGE the last %d bytes\n", totalsize);
      }
      else {
        /* X-Y */
        totalsize = to-from;
        conn->maxdownload = totalsize+1; /* include the last mentioned byte */
        conn->resume_from = from;
        infof(data, "FTP RANGE from %d getting %d bytes\n", from,
              conn->maxdownload);
      }
      infof(data, "range-download from %d to %d, totally %d bytes\n",
            from, to, totalsize);
    }

    if((data->set.ftp_list_only) || !ftp->file) {
      /* The specified path ends with a slash, and therefore we think this
         is a directory that is requested, use LIST. But before that we
         need to set ASCII transfer mode. */
      dirlist = TRUE;

      /* Set type to ASCII */
      result = _ftp_transfertype(conn, TRUE /* ASCII enforced */);
      if(result)
        return result;

      /* if this output is to be machine-parsed, the NLST command will be
         better used since the LIST command output is not specified or
         standard in any way */

      ftpsendf(conn->firstsocket, conn, "%s",
            data->set.customrequest?data->set.customrequest:
            (data->set.ftp_list_only?"NLST":"LIST"));
    }
    else {
      /* Set type to binary (unless specified ASCII) */
      result = _ftp_transfertype(conn, data->set.ftp_ascii);
      if(result)
        return result;

      if(conn->resume_from) {

        /* Daniel: (August 4, 1999)
         *
         * We start with trying to use the SIZE command to figure out the size
         * of the file we're gonna get. If we can get the size, this is by far
         * the best way to know if we're trying to resume beyond the EOF.  */
        int foundsize=-1;
        
        result = _ftp_getsize(conn, ftp->file, &foundsize);

        if(CURLE_OK != result) {
          infof(data, "ftp server doesn't support SIZE\n");
          /* We couldn't get the size and therefore we can't know if there
             really is a part of the file left to get, although the server
             will just close the connection when we start the connection so it
             won't cause us any harm, just not make us exit as nicely. */
        }
        else {
          /* We got a file size report, so we check that there actually is a
             part of the file left to get, or else we go home.  */
          if(conn->resume_from< 0) {
            /* We're supposed to download the last abs(from) bytes */
            if(foundsize < -conn->resume_from) {
              failf(data, "Offset (%d) was beyond file size (%d)",
                    conn->resume_from, foundsize);
              return CURLE_FTP_BAD_DOWNLOAD_RESUME;
            }
            /* convert to size to download */
            downloadsize = -conn->resume_from;
            /* download from where? */
            conn->resume_from = foundsize - downloadsize;
          }
          else {
            if(foundsize < conn->resume_from) {
              failf(data, "Offset (%d) was beyond file size (%d)",
                    conn->resume_from, foundsize);
              return CURLE_FTP_BAD_DOWNLOAD_RESUME;
            }
            /* Now store the number of bytes we are expected to download */
            downloadsize = foundsize-conn->resume_from;
          }
        }

        if (downloadsize == 0) {
          /* no data to transfer */
          result=Curl_Transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
          infof(data, "File already completely downloaded\n");

          /* Set resume done so that we won't get any error in Curl_ftp_done()
           * because we didn't transfer the amount of bytes that the remote
           * file obviously is */
          conn->bits.resume_done = TRUE; 

          return CURLE_OK;
        }
	
        /* Set resume file transfer offset */
        infof(data, "Instructs server to resume from offset %d\n",
              conn->resume_from);

        ftpsendf(conn->firstsocket, conn, "REST %d", conn->resume_from);

        nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
        if(nread < 0)
          return CURLE_OPERATION_TIMEOUTED;

        if(ftpcode != 350) {
          failf(data, "Couldn't use REST: %s", buf+4);
          return CURLE_FTP_COULDNT_USE_REST;
        }
      }

      ftpsendf(conn->firstsocket, conn, "RETR %s", ftp->file);
    }

    nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
    if(nread < 0)
      return CURLE_OPERATION_TIMEOUTED;

    if((ftpcode == 150) || (ftpcode == 125)) {

      /*
        A;
        150 Opening BINARY mode data connection for /etc/passwd (2241
        bytes).  (ok, the file is being transfered)
	
        B:
        150 Opening ASCII mode data connection for /bin/ls 

        C:
        150 ASCII data connection for /bin/ls (137.167.104.91,37445) (0 bytes).

        D:
        150 Opening ASCII mode data connection for /linux/fisk/kpanelrc (0.0.0.0,0) (545 bytes).
          
        E:
        125 Data connection already open; Transfer starting. */

      int size=-1; /* default unknown size */

      if(!dirlist &&
         !data->set.ftp_ascii &&
         (-1 == downloadsize)) {
        /*
         * It seems directory listings either don't show the size or very
         * often uses size 0 anyway. ASCII transfers may very well turn out
         * that the transfered amount of data is not the same as this line
         * tells, why using this number in those cases only confuses us.
         *
         * Example D above makes this parsing a little tricky */
        char *bytes;
        bytes=strstr(buf, " bytes");
        if(bytes--) {
          int index=bytes-buf;
          /* this is a hint there is size information in there! ;-) */
          while(--index) {
            /* scan for the parenthesis and break there */
            if('(' == *bytes)
              break;
            /* if only skip digits, or else we're in deep trouble */
            if(!isdigit((int)*bytes)) {
              bytes=NULL;
              break;
            }
            /* one more estep backwards */
            bytes--;
          }
          /* only if we have nothing but digits: */
          if(bytes++) {
            /* get the number! */
            size = atoi(bytes);
          }
            
        }
      }
      else if(downloadsize > -1)
        size = downloadsize;

      if(data->set.ftp_use_port) {
        result = AllowServerConnect(data, conn, portsock);
        if( result )
          return result;
      }

      infof(data, "Getting file with size: %d\n", size);

      /* FTP download: */
      result=Curl_Transfer(conn, conn->secondarysocket, size, FALSE,
                           bytecountp,
                           -1, NULL); /* no upload here */
      if(result)
        return result;
    }
    else {
      failf(data, "%s", buf+4);
      return CURLE_FTP_COULDNT_RETR_FILE;
    }
	
  }
  /* end of transfer */

  return CURLE_OK;
}

/* -- deal with the ftp server!  -- */

/* argument is already checked for validity */
CURLcode Curl_ftp(struct connectdata *conn)
{
  CURLcode retcode;

  struct SessionHandle *data = conn->data;
  struct FTP *ftp;
  int dirlength=0; /* 0 forces strlen() */

  /* the ftp struct is already inited in ftp_connect() */
  ftp = conn->proto.ftp;

  /* We split the path into dir and file parts *before* we URLdecode
     it */
  ftp->file = strrchr(conn->ppath, '/');
  if(ftp->file) {
    if(ftp->file != conn->ppath)
      dirlength=ftp->file-conn->ppath; /* don't count the traling slash */

    ftp->file++; /* point to the first letter in the file name part or
                    remain NULL */
  }
  else {
    ftp->file = conn->ppath; /* there's only a file part */
  }

  if(*ftp->file) {
    ftp->file = curl_unescape(ftp->file, 0);
    if(NULL == ftp->file) {
      failf(data, "no memory");
      return CURLE_OUT_OF_MEMORY;
    }
  }
  else
    ftp->file=NULL; /* instead of point to a zero byte, we make it a NULL
                       pointer */

  ftp->urlpath = conn->ppath;
  if(dirlength) {
    ftp->dir = curl_unescape(ftp->urlpath, dirlength);
    if(NULL == ftp->dir) {
      if(ftp->file)
        free(ftp->file);
      failf(data, "no memory");
      return CURLE_OUT_OF_MEMORY; /* failure */
    }
  }
  else
    ftp->dir = NULL;

  retcode = _ftp(conn);

  /* clean up here, success or error doesn't matter */
  if(ftp->file)
    free(ftp->file);
  if(ftp->dir)
    free(ftp->dir);

  ftp->file = ftp->dir = NULL; /* zero */

  return retcode;
}

/*
 * ftpsendf() sends the formated string as a ftp command to a ftp server
 *
 * NOTE: we build the command in a fixed-length buffer, which sets length
 * restrictions on the command!
 *
 */
size_t Curl_ftpsendf(int fd, struct connectdata *conn,
                     const char *fmt, ...)
{
  size_t bytes_written;
  char s[256];

  va_list ap;
  va_start(ap, fmt);
  vsnprintf(s, 250, fmt, ap);
  va_end(ap);

  if(conn->data->set.verbose)
    fprintf(conn->data->set.err, "> %s\n", s);

  strcat(s, "\r\n"); /* append a trailing CRLF */

  bytes_written=0;
  Curl_write(conn, fd, s, strlen(s), &bytes_written);

  return(bytes_written);
}


CURLcode Curl_ftp_disconnect(struct connectdata *conn)
{
  struct FTP *ftp= conn->proto.ftp;

  /* The FTP session may or may not have been allocated/setup at this point! */
  if(ftp) {
    if(ftp->entrypath)
      free(ftp->entrypath);
  }
  return CURLE_OK;
}

/*
 * local variables:
 * eval: (load-file "../curl-mode.el")
 * end:
 * vim600: et sw=2 ts=2 sts=2 tw=78 fdm=marker
 * vim<600: et sw=2 ts=2 sts=2 tw=78
 */