INSTALL

                                  _   _ ____  _     
                              ___| | | |  _ \| |    
                             / __| | | | |_) | |    
                            | (__| |_| |  _ <| |___ 
                             \___|\___/|_| \_\_____|

                                How To Compile

Installing Binary Packages
==========================

   Lots of people download binary distributions of curl and libcurl. This
   document does not describe how to install curl or libcurl using such a
   binary package. This document describes how to compile, build and install
   curl and libcurl from source code.

UNIX
====

   A normal unix installation is made in three or four steps (after you've
   unpacked the source archive):

        ./configure
        make
        make test (optional)
        make install

   You probably need to be root when doing the last command.

   If you have checked out the sources from the CVS repository, read the
   CVS-INFO on how to proceed.

   Get a full listing of all available configure options by invoking it like:

        ./configure --help

   If you want to install curl in a different file hierarchy than /usr/local,
   you need to specify that already when running configure:

        ./configure --prefix=/path/to/curl/tree

   If you happen to have write permission in that directory, you can do 'make
   install' without being root. An example of this would be to make a local
   install in your own home directory:

        ./configure --prefix=$HOME
        make
        make install

   The configure script always tries to find a working SSL library unless
   explicitly told not to. If you have OpenSSL installed in the default search
   path for your compiler/linker, you don't need to do anything special. If
   you have OpenSSL installed in /usr/local/ssl, you can run configure like:

	./configure --with-ssl

   If you have OpenSSL installed somewhere else (for example, /opt/OpenSSL,)
   you can run configure like this:

	./configure --with-ssl=/opt/OpenSSL

   If you insist on forcing a build without SSL support, even though you may
   have OpenSSL installed in your system, you can run configure like this:

        ./configure --without-ssl

   If you have OpenSSL installed, but with the libraries in one place and the
   header files somewhere else, you have to set the LDFLAGS and CPPFLAGS
   environment variables prior to running configure.  Something like this
   should work:

     (with the Bourne shell and its clones):

       CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" \
           ./configure

     (with csh, tcsh and their clones):
     
       env CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" \
       ./configure

   If you have shared SSL libs installed in a directory where your run-time
   linker doesn't find them (which usually causes configure failures), you can
   provide the -R option to ld on some operating systems to set a hard-coded
   path to the run-time linker:

        LDFLAGS=-R/usr/local/ssl/lib ./configure --with-ssl

   Another option to the previous trick, is to set LD_LIBRARY_PATH or edit the
   /etc/ld.so.conf file.

   If your SSL library was compiled with rsaref (this was common in the past
   when used in the United States), you may also need to set:

     LIBS=-lRSAglue -lrsaref
     (as suggested by Doug Kaufman)

   MORE OPTIONS

     To force configure to use the standard cc compiler if both cc and gcc are
     present, run configure like

       CC=cc ./configure
         or
       env Cc=cc ./configure

     To force a static library compile, disable the shared library creation
     by running configure like:

       ./configure --disable-shared

     To tell the configure script to skip searching for thread-safe functions,
     add an option like:

       ./configure --disable-thread

     To build curl with kerberos4 support enabled, curl requires the krb4 libs
     and headers installed. You can then use a set of options to tell
     configure where those are:

          --with-krb4-includes[=DIR]   Specify location of kerberos4 headers
          --with-krb4-libs[=DIR]       Specify location of kerberos4 libs
          --with-krb4[=DIR]            where to look for Kerberos4

     In most cases, /usr/athena is the install prefix and then it works with

       ./configure --with-krb4=/usr/athena

     If you're a curl developer and use gcc, you might want to enable more
     debug options with the --enable-debug option.

Win32
=====
 
   Without SSL:

      MingW32 (GCC-2.95) style
      ------------------------
        Run the 'mingw32.bat' file to get the proper environment variables
        set, then run 'make mingw32' in the root dir.

        If you have any problems linking libraries or finding header files, be
        sure to verify that the provided "Makefile.m32" files use the proper
        paths, and adjust as necessary.

      Cygwin style
      ------------
        Almost identical to the unix installation. Run the configure script in
        the curl root with 'sh configure'. Make sure you have the sh
        executable in /bin/ or you'll see the configure fail towards the end.

        Run 'make'

      Microsoft command line style
      ----------------------------
        Run the 'vcvars32.bat' file to get the proper environment variables
        set, then run 'nmake vc' in the root dir.

        The vcvars32.bat file is part of the Microsoft development
        environment.

      IDE-style
      -------------------------
        If you use VC++, Borland or similar compilers. Include all lib source
        files in a static lib "project" (all .c and .h files that is).
        (you should name it libcurl or similar)

        Make the sources in the src/ drawer be a "win32 console application"
        project. Name it curl.

        For VC++ 6, there's an included Makefile.vc6 that should be possible
        to use out-of-the-box.


   With SSL:

      MingW32 (GCC-2.95) style
      ------------------------
        Run the 'mingw32.bat' file to get the proper environment variables
        set, then run 'make mingw32-ssl' in the root dir.

        If you have any problems linking libraries or finding header files, be
        sure to look at the provided "Makefile.m32" files for the proper
        paths, and adjust as necessary.

      Cygwin style
      ------------
        Haven't done, nor got any reports on how to do. It should although be
        identical to the unix setup for the same purpose. See above.

      Microsoft command line style
      ----------------------------

        Run the 'vcvars32.bat' file to get a proper environment. The
        vcvars32.bat file is part of the Microsoft development environment and
        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
        provided that you installed Visual C/C++ 6 in the default directory.

        Then run 'nmake vc' in curl's root directory.

        If you want to compile with zlib support, you will need to build
        zlib (http://www.gzip.org/zlib/) as well. Please read the zlib 
        documentation on how to compile zlib. Define the ZLIB_PATH environment 
        variable to the location of zlib.h and zlib.lib, for example:

          set ZLIB_PATH=c:\zlib-1.2.1

        Then run 'nmake vc-zlib' in curl's root directory.

        If you want to compile with SSL support you need the OpenSSL package.
        Please read the OpenSSL documentation on how to compile and install
        the OpenSSL libraries.  The build process of OpenSSL generates the
        libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
        the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
        ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.

        Before running nmake define the OPENSSL_PATH environment variable with
        the root/base directory of OpenSSL, for example:

          set OPENSSL_PATH=c:\openssl-0.9.7d

        Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
        directory.  'nmake vc-ssl' will create a libcurl static and dynamic
        libraries in the lib subdirectory, as well as a statically linked
        version of curl.exe in the src subdirectory.  This statically linked
        version is a standalone executable not requiring any DLL at
        runtime. This make method requires that you have the static OpenSSL
        libraries available in OpenSSL's out32 subdirectory.
        'nmake vc-ssl-dll' creates the libcurl dynamic library and
        links curl.exe against libcurl and OpenSSL dynamically.
        This executable requires libcurl.dll and the OpenSSL DLLs
        at runtime. 
        Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.

      Microsoft / Borland style
      -------------------------
        If you have OpenSSL, and want curl to take advantage of it, edit your
        project properties to use the SSL include path, link with the SSL libs
        and define the USE_SSLEAY symbol.

      Using Borland C++ compiler version 5.5.1 (available as free download
      from Borland's site)
      ---------------------------------------------------------------------
      
        compile openssl
      
        Make sure you include the paths to curl/include and openssl/inc32 in
        your bcc32.cnf file
      

        eg : -I"c:\Bcc55\include;c:\path_curl\include;c:\path_openssl\inc32"
        
        Check to make sure that all of the sources listed in lib/Makefile.b32
        are present in the /path_to_curl/lib directory. (Check the src
        directory for missing ones.)
        
        Make sure the environment variable "BCCDIR" is set to the install
        location for the compiler eg : c:\Borland\BCC55
        
        command line:
        make -f /path_to_curl/lib/Makefile-ssl.b32
        
        compile simplessl.c with appropriate links
        
        c:\curl\docs\examples\> bcc32 -L c:\path_to_curl\lib\libcurl.lib
                                      -L c:\borland\bcc55\lib\psdk\ws2_32.lib
                                      -L c:\openssl\out32\libeay32.lib
                                      -L c:\openssl\out32\ssleay32.lib
                                      simplessl.c

   Disabling Specific Protocols:

      The configure utility, unfortunately, is not available for the Windows
      environment, therefore, you cannot use the various disable-protocol
      options of the configure utility on this platform.

      However, you can use the following defines to disable specific
      protocols:

      HTTP_ONLY             disables all protocols except HTTP
      CURL_DISABLE_FTP      disables FTP
      CURL_DISABLE_LDAP     disables LDAP
      CURL_DISABLE_TELNET   disables TELNET
      CURL_DISABLE_DICT     disables DICT
      CURL_DISABLE_FILE     disables FILE
      CURL_DISABLE_GOPHER   disables GOPHER

      If you want to set any of these defines you have the following
      possibilities:

      - Modify lib/setup.h
      - Modify lib/Makefile.vc6
      - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
        in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.

IBM OS/2
========

   Building under OS/2 is not much different from building under unix.
   You need:

      - emx 0.9d
      - GNU make
      - GNU patch
      - ksh
      - GNU bison
      - GNU file utilities
      - GNU sed
      - autoconf 2.13

   If you want to build with OpenSSL or OpenLDAP support, you'll need to
   download those libraries, too. Dirk Ohme has done some work to port SSL
   libraries under OS/2, but it looks like he doesn't care about emx.  You'll
   find his patches on: http://come.to/Dirk_Ohme

   If during the linking you get an error about _errno being an undefined
   symbol referenced from the text segment, you need to add -D__ST_MT_ERRNO__
   in your definitions.

   If everything seems to work fine but there's no curl.exe, you need to add
   -Zexe to your linker flags.

   If you're getting huge binaries, probably your makefiles have the -g in
   CFLAGS.

VMS
===
   (The VMS section is in whole contributed by the friendly Nico Baggus)

   Curl seems to work with FTP & HTTP other protocols are not tested.  (the
   perl http/ftp testing server supplied as testing too cannot work on VMS
   because vms has no concept of fork(). [ I tried to give it a whack, but
   thats of no use.

   SSL stuff has not been ported.

   Telnet has about the same issues as for Win32. When the changes for Win32
   are clear maybe they'll work for VMS too. The basic problem is that select
   ONLY works for sockets.

   Marked instances of fopen/[f]stat that might become a problem, especially
   for non stream files. In this regard, the files opened for writing will be
   created stream/lf and will thus be safe. Just keep in mind that non-binary
   read/wring from/to files will have a records size limit of 32767 bytes
   imposed.

   Stat to get the size of the files is again only safe for stream files &
   fixed record files without implied CC.

   -- My guess is that only allowing access to stream files is the quickest
   way to get around the most issues. Therefore all files need to to be
   checked to be sure they will be stream/lf before processing them.  This is
   the easiest way out, I know. The reason for this is that code that needs to
   report the filesize will become a pain in the ass otherwise.

   Exit status.... Well we needed something done here,

   VMS has a structured exist status:
   | 3  |       2    |     1       |  0|
   |1098|765432109876|5432109876543|210|
   +----+------------+-------------+---+
   |Ctrl|  Facility  | Error code  |sev|
   +----+------------+-------------+---+

   With the Ctrl-bits an application can tell if part or the whole message has
   allready been printed from the program, DCL doesn't need to print it again.

   Facility - basicaly the program ID. A code assigned to the program
   the name can be fetched from external or internal message libraries
   Errorcode - the errodes assigned by the application
   Sev. - severity: Even = error, off = non error
      0 = Warning
      1 = Success
      2 = Error
      3 = Information
      4 = Fatal 
      <5-7> reserved.

   This all presents itself with:
   %<FACILITY>-<SeV>-<Errorname>, <Error message>

   See also the src/curlmsg.msg file, it has the source for the messages In
   src/main.c a section is devoted to message status values, the globalvalues
   create symbols with certain values, referenced from a compiled message
   file. Have all exit function use a exit status derived from a translation
   table with the compiled message codes.

   This was all compiled with:

      Compaq C V6.2-003 on OpenVMS Alpha V7.1-1H2

   So far for porting notes as of:
   13-jul-2001
   N. Baggus

QNX
===
   (This section was graciously brought to us by David Bentham)

   As QNX is targetted for resource constrained environments, the QNX headers
   set conservative limits. This includes the FD_SETSIZE macro, set by default
   to 32. Socket descriptors returned within the CURL library may exceed this,
   resulting in memory faults/SIGSEGV crashes when passed into select(..)
   calls using fd_set macros.

   A good all-round solution to this is to override the default when building
   libcurl, by overriding CFLAGS during configure, example
   #  configure CFLAGS='-DFD_SETSIZE=64 -g -O2'

CROSS COMPILE
=============

   (This section was graciously brought to us by Jim Duey, 23-oct-2001)

   Download and unpack the cURL package.  Version should be 7.9.1 or later.

   'cd' to the new directory. (ie. curl-7.9.1-pre4)

   Set environment variables to point to the cross-compile toolchain and call
   configure with any options you need.  Be sure and specify the '--host' and
   '--build' parameters at configuration time.  The following script is an
   example of cross-compiling for the IBM 405GP PowerPC processor using the
   toolchain from MonteVista for Hardhat Linux.

   (begin script)

   #! /bin/sh

   export PATH=$PATH:/opt/hardhat/devkit/ppc/405/bin
   export CPPFLAGS="-I/opt/hardhat/devkit/ppc/405/target/usr/include"
   export AR=ppc_405-ar
   export AS=ppc_405-as
   export LD=ppc_405-ld
   export RANLIB=ppc_405-ranlib
   export CC=ppc_405-gcc
   export NM=ppc_405-nm

   configure --target=powerpc-hardhat-linux \
	--host=powerpc-hardhat-linux \
	--build=i586-pc-linux-gnu \
	--prefix=/opt/hardhat/devkit/ppc/405/target/usr/local \
	--exec-prefix=/usr/local

   (end script)

   The '--prefix' parameter specifies where cURL will be installed.  If
   'configure' completes successfully, do 'make' and 'make install' as usual.

RISC OS
=======
   The library can be cross-compiled using gccsdk as follows:

        CC=riscos-gcc AR=riscos-ar RANLIB='riscos-ar -s' ./configure \
             --host=arm-riscos-aof --without-random --disable-shared
        make

   where riscos-gcc and riscos-ar are links to the gccsdk tools.
   You can then link your program with curl/lib/.libs/libcurl.a


AmigaOS
=======
   (This section was graciously brought to us by Diego Casorran)

   To build cURL/libcurl on AmigaOS just type 'make amiga' ...

   What you need is:    (not tested with others versions)

        GeekGadgets / gcc 2.95.3 (http://www.geekgadgets.org/)

        AmiTCP SDK v4.3 (http://www.aminet.net/comm/tcp/AmiTCP-SDK-4.3.lha)

        Native Developer Kit (http://www.amiga.com/3.9/download/NDK3.9.lha)

   As no ixemul.library is required you will be able to build it for
   WarpOS/PowerPC (not tested by me), as well a MorphOS version should be
   possible with no problems.

   To enable SSL support, you need a OpenSSL native version (without ixemul),
   you can find a precompiled package at http://amiga.sourceforge.net/OpenSSL/


NetWare
=======

   To compile curl.nlm / libcurl.nlm you need:
   - either any gcc / nlmconv, or CodeWarrior 7 PDK 4 or later.
   - gnu make and awk running on the platform you compile on;
     native Win32 versions can be downloaded from:
     http://www.gknw.com/development/prgtools/ 
   - recent Novell LibC SDK availabable from:
     http://developer.novell.com/ndk/libc.htm
   - optional zlib sources (at the moment only dynamic linking with zlib.imp); 
     sources with NetWare Makefile can be optained from:
     http://www.gknw.com/mirror/zlib/

   Set a search path to your compiler, linker and tools; if you want to have
   zlib support then set the environment var ZLIB_PATH pointing to your zlib
   sources, on Linux make sure the var OSTYPE contains the string 'linux';
   and finally type 'make netware' from the top source directory...
   I found on some Linux systems (RH9) that OS detection didnt work although
   a 'set | grep OSTYPE' shows the var present and set; I simply overwrote it
   with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...;
   other options are currently not supported, although partly prepared.
   The Ares lib builds arlready fine, and both test tools work fine at least 
   when build with CodeWarrior...; dont know yet why they fail when build with
   gcc though; if you want to compile with Ares support then set an env var
   WITH_ARES=1; I've not tested yet including libcares into curl.
   Any help in testing appreciated!
   Buils automatically created 4 times a day from current CVS are here:
   http://www.gknw.com/mirror/curl/autobuilds/
   the status of these buids can be viewed at the autobuild table:
   http://curl.haxx.se/auto/


PORTS
=====
   This is a probably incomplete list of known hardware and operating systems
   that curl has been compiled for. If you know a system curl compiles and
   runs on, that isn't listed, please let us know!

        - Alpha DEC OSF 4
        - Alpha Digital UNIX v3.2
        - Alpha FreeBSD 4.1, 4.5
        - Alpha Linux 2.2, 2.4
        - Alpha NetBSD 1.5.2
        - Alpha OpenBSD 3.0
        - Alpha OpenVMS V7.1-1H2
        - Alpha Tru64 v5.0 5.1
        - HP-PA HP-UX 9.X 10.X 11.X
        - HP-PA Linux
        - HP3000 MPE/iX
        - MIPS IRIX 6.2, 6.5
        - MIPS Linux
        - Pocket PC/Win CE 3.0
        - Power AIX 3.2.5, 4.2, 4.3.1, 4.3.2, 5.1
        - PowerPC Darwin 1.0
        - PowerPC Linux
        - PowerPC Mac OS 9
        - PowerPC Mac OS X
        - SINIX-Z v5
        - Sparc Linux
        - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8
        - Sparc SunOS 4.1.X
        - StrongARM (and other ARM) RISC OS 3.1, 4.02
        - StrongARM Linux 2.4
        - StrongARM NetBSD 1.4.1
        - Ultrix 4.3a
        - i386 BeOS
        - i386 DOS
        - i386 FreeBSD
        - i386 HURD
        - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4
        - i386 NetBSD
        - i386 Novell NetWare
        - i386 OS/2
        - i386 OpenBSD
        - i386 SCO unix
        - i386 Solaris 2.7
        - i386 Windows 95, 98, ME, NT, 2000
        - i386 QNX 6
        - i486 ncr-sysv4.3.03 (NCR MP-RAS)
        - ia64 Linux 2.3.99
        - m68k AmigaOS 3
        - m68k Linux
        - m68k OpenBSD
        - m88k dg-dgux5.4R3.00
        - s390 Linux 
        - XScale/PXA250 Linux 2.4

Useful URLs
===========

OpenSSL   http://www.openssl.org
MingW     http://www.mingw.org
OpenLDAP  http://www.openldap.org
Zlib      http://www.gzip.org/zlib/