Newer
Older
#ifndef __CURL_CURL_H
#define __CURL_CURL_H
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
Daniel Stenberg
committed
* Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
***************************************************************************/
/*
* If you have libcurl problems, all docs and details are found here:
* http://curl.haxx.se/libcurl/
*
* curl-library mailing list subscription and unsubscription web interface:
* http://cool.haxx.se/mailman/listinfo/curl-library/
*/
#include "curlver.h" /* libcurl version defines */
#include "curl/curlbuild.h" /* libcurl build definitions */
#include "curlrules.h" /* libcurl rules enforcement */
/*
* Define WIN32 when build target is Win32 API
*/
#if (defined(_WIN32) || defined(__WIN32__)) && \
!defined(WIN32) && !defined(__SYMBIAN32__)
Daniel Stenberg
committed
/* The include stuff here below is mainly for time_t! */
#ifdef vms
# include <types.h>
# include <time.h>
#else
# include <sys/types.h>
Daniel Stenberg
committed
# include <time.h>
#if defined(WIN32) && !defined(_WIN32_WCE) && !defined(__GNUC__) && \
!defined(__CYGWIN__) || defined(__MINGW32__)
#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H))
/* The check above prevents the winsock2 inclusion if winsock.h already was
included, since they can't co-exist without problems */
#include <winsock2.h>
#include <ws2tcpip.h>
#endif
#else
/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish
libc5-based Linux systems. Only include it on system that are known to
require it! */
#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
Daniel Stenberg
committed
defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY)
#include <sys/select.h>
#endif
#ifndef _WIN32_WCE
#include <sys/socket.h>
#endif
#if !defined(WIN32) && !defined(__WATCOMC__)
#include <sys/time.h>
#endif
#include <sys/types.h>
#endif
#ifdef __BEOS__
#include <support/SupportDefs.h>
#endif
typedef void CURL;
#ifdef USES_DIRECT_CURL_UTILITIES
#define CURL_EXTERN
#else /* USES_DIRECT_CURL_UTILITIES */
* Decorate exportable functions for Win32 and Symbian OS DLL linking.
#if (defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__)) && \
!defined(CURL_STATICLIB)
#if defined(BUILDING_LIBCURL)
#define CURL_EXTERN __declspec(dllexport)
#else
#define CURL_EXTERN __declspec(dllimport)
#endif
#else
#ifdef CURL_HIDDEN_SYMBOLS
/*
* This definition is used to make external definitions visible in the
* shared library when symbols are hidden by default. It makes no
* difference when compiling applications whether this is set or not,
* only when compiling the library.
#define CURL_EXTERN CURL_EXTERN_SYMBOL
Daniel Stenberg
committed
#define CURL_EXTERN
#endif /* USES_DIRECT_CURL_UTILITIES */
#ifndef curl_socket_typedef
/* socket typedef */
#ifdef WIN32
typedef SOCKET curl_socket_t;
#define CURL_SOCKET_BAD INVALID_SOCKET
#else
typedef int curl_socket_t;
#define CURL_SOCKET_BAD -1
#endif
#define curl_socket_typedef
#endif /* curl_socket_typedef */
struct curl_httppost {
struct curl_httppost *next; /* next entry in the list */
char *name; /* pointer to allocated name */
long namelength; /* length of name length */
char *contents; /* pointer to allocated data contents */
long contentslength; /* length of contents field */
char *buffer; /* pointer to allocated buffer contents */
long bufferlength; /* length of buffer field */
char *contenttype; /* Content-Type */
struct curl_slist* contentheader; /* list of extra headers for this form */
struct curl_httppost *more; /* if one field name has more than one
file, this link should link to following
files */
long flags; /* as defined below */
#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
#define HTTPPOST_READFILE (1<<1) /* specified content is a file name */
#define HTTPPOST_PTRNAME (1<<2) /* name is only stored pointer
do not free in formfree */
#define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer
do not free in formfree */
#define HTTPPOST_BUFFER (1<<4) /* upload file from buffer */
#define HTTPPOST_PTRBUFFER (1<<5) /* upload file from pointer contents */
#define HTTPPOST_CALLBACK (1<<6) /* upload file contents by using the
Daniel Stenberg
committed
regular read callback to get the data
and pass the given pointer as custom
pointer */
Daniel Stenberg
committed
char *showfilename; /* The file name to show. If not set, the
actual file name will be used (if this
is a file part) */
Daniel Stenberg
committed
void *userp; /* custom pointer used for
HTTPPOST_CALLBACK posts */
typedef int (*curl_progress_callback)(void *clientp,
double dltotal,
double dlnow,
double ultotal,
double ulnow);
Daniel Stenberg
committed
#ifndef CURL_MAX_WRITE_SIZE
/* Tests have proven that 20K is a very bad buffer size for uploads on
Daniel Stenberg
committed
Windows, while 16K for some odd reason performed a lot better.
We do the ifndef check to allow this value to easier be changed at build
time for those who feel adventurous. */
#define CURL_MAX_WRITE_SIZE 16384
Daniel Stenberg
committed
#endif
Daniel Stenberg
committed
/* This is a magic return code for the write callback that, when returned,
will signal libcurl to pause receiving on the current transfer. */
Daniel Stenberg
committed
#define CURL_WRITEFUNC_PAUSE 0x10000001
typedef size_t (*curl_write_callback)(char *buffer,
size_t size,
size_t nitems,
void *outstream);
/* This is a return code for the read callback that, when returned, will
signal libcurl to immediately abort the current transfer. */
Daniel Stenberg
committed
/* This is a return code for the read callback that, when returned, will
signal libcurl to pause sending data on the current transfer. */
#define CURL_READFUNC_PAUSE 0x10000001
Daniel Stenberg
committed
typedef int (*curl_seek_callback)(void *instream,
curl_off_t offset,
Daniel Stenberg
committed
int origin); /* 'whence' */
Daniel Stenberg
committed
typedef size_t (*curl_read_callback)(char *buffer,
size_t size,
size_t nitems,
void *instream);
typedef enum {
CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */
CURLSOCKTYPE_LAST /* never use */
} curlsocktype;
typedef int (*curl_sockopt_callback)(void *clientp,
curl_socket_t curlfd,
curlsocktype purpose);
Daniel Stenberg
committed
struct curl_sockaddr {
int family;
int socktype;
int protocol;
Daniel Stenberg
committed
unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it
Daniel Stenberg
committed
turned really ugly and painful on the systems that
lack this type */
struct sockaddr addr;
};
typedef curl_socket_t
Daniel Stenberg
committed
(*curl_opensocket_callback)(void *clientp,
curlsocktype purpose,
Daniel Stenberg
committed
struct curl_sockaddr *address);
#ifndef CURL_NO_OLDIES
/* not used since 7.10.8, will be removed in a future release */
typedef int (*curl_passwd_callback)(void *clientp,
char *buffer,
int buflen);
#endif
typedef enum {
CURLIOE_OK, /* I/O operation successful */
CURLIOE_UNKNOWNCMD, /* command was unknown to callback */
CURLIOE_FAILRESTART, /* failed to restart the read */
CURLIOE_LAST /* never use */
} curlioerr;
typedef enum {
CURLIOCMD_NOP, /* no operation */
CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
CURLIOCMD_LAST /* never use */
} curliocmd;
typedef curlioerr (*curl_ioctl_callback)(CURL *handle,
int cmd,
void *clientp);
/*
* The following typedef's are signatures of malloc, free, realloc, strdup and
* calloc respectively. Function pointers of these types can be passed to the
* curl_global_init_mem() function to set user defined memory management
* callback routines.
*/
typedef void *(*curl_malloc_callback)(size_t size);
typedef void (*curl_free_callback)(void *ptr);
typedef void *(*curl_realloc_callback)(void *ptr, size_t size);
typedef char *(*curl_strdup_callback)(const char *str);
typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size);
/* the kind of data that is passed to information_callback*/
typedef enum {
CURLINFO_TEXT = 0,
CURLINFO_HEADER_IN, /* 1 */
CURLINFO_HEADER_OUT, /* 2 */
CURLINFO_DATA_IN, /* 3 */
CURLINFO_DATA_OUT, /* 4 */
Daniel Stenberg
committed
CURLINFO_SSL_DATA_IN, /* 5 */
CURLINFO_SSL_DATA_OUT, /* 6 */
CURLINFO_END
} curl_infotype;
typedef int (*curl_debug_callback)
(CURL *handle, /* the handle/transfer this concerns */
curl_infotype type, /* what kind of data */
char *data, /* points to the data */
size_t size, /* size of the data pointed to */
void *userptr); /* whatever the user please */
/* All possible error codes from all sorts of curl functions. Future versions
may return other values, stay prepared.
Always add new return codes last. Never *EVER* remove any. The return
codes must remain the same!
*/
CURLE_UNSUPPORTED_PROTOCOL, /* 1 */
CURLE_FAILED_INIT, /* 2 */
CURLE_URL_MALFORMAT, /* 3 */
CURLE_OBSOLETE4, /* 4 - NOT USED */
CURLE_COULDNT_RESOLVE_PROXY, /* 5 */
CURLE_COULDNT_RESOLVE_HOST, /* 6 */
CURLE_COULDNT_CONNECT, /* 7 */
CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */
CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server
due to lack of access - when login fails
this is not returned. */
CURLE_OBSOLETE10, /* 10 - NOT USED */
CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */
CURLE_OBSOLETE12, /* 12 - NOT USED */
CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */
CURLE_FTP_WEIRD_227_FORMAT, /* 14 */
CURLE_FTP_CANT_GET_HOST, /* 15 */
CURLE_OBSOLETE16, /* 16 - NOT USED */
CURLE_FTP_COULDNT_SET_TYPE, /* 17 */
CURLE_PARTIAL_FILE, /* 18 */
CURLE_FTP_COULDNT_RETR_FILE, /* 19 */
CURLE_OBSOLETE20, /* 20 - NOT USED */
CURLE_QUOTE_ERROR, /* 21 - quote command failure */
CURLE_HTTP_RETURNED_ERROR, /* 22 */
CURLE_WRITE_ERROR, /* 23 */
CURLE_OBSOLETE24, /* 24 - NOT USED */
CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */
CURLE_READ_ERROR, /* 26 - couldn't open/read from file */
CURLE_OUT_OF_MEMORY, /* 27 */
/* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error
instead of a memory allocation error if CURL_DOES_CONVERSIONS
is defined
*/
CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */
CURLE_OBSOLETE29, /* 29 - NOT USED */
CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */
CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */
CURLE_OBSOLETE32, /* 32 - NOT USED */
CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */
CURLE_HTTP_POST_ERROR, /* 34 */
CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */
CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
CURLE_FILE_COULDNT_READ_FILE, /* 37 */
CURLE_LDAP_CANNOT_BIND, /* 38 */
CURLE_LDAP_SEARCH_FAILED, /* 39 */
CURLE_OBSOLETE40, /* 40 - NOT USED */
CURLE_FUNCTION_NOT_FOUND, /* 41 */
CURLE_ABORTED_BY_CALLBACK, /* 42 */
CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */
CURLE_OBSOLETE44, /* 44 - NOT USED */
CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */
CURLE_OBSOLETE46, /* 46 - NOT USED */
CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */
CURLE_UNKNOWN_TELNET_OPTION, /* 48 - User specified an unknown option */
CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */
CURLE_OBSOLETE50, /* 50 - NOT USED */
CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint
wasn't verified fine */
CURLE_GOT_NOTHING, /* 52 - when this is a specific error */
CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */
CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as
default */
CURLE_SEND_ERROR, /* 55 - failed sending network data */
CURLE_RECV_ERROR, /* 56 - failure in receiving network data */
CURLE_OBSOLETE57, /* 57 - NOT IN USE */
CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */
CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */
CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */
CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized transfer encoding */
CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */
CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */
CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */
CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind
CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */
CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not
accepted and we failed to login */
CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */
CURLE_TFTP_PERM, /* 69 - permission problem on server */
CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */
CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */
CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */
CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */
CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */
CURLE_CONV_FAILED, /* 75 - conversion failed */
CURLE_CONV_REQD, /* 76 - caller must register conversion
callbacks using curl_easy_setopt options
CURLOPT_CONV_FROM_NETWORK_FUNCTION,
CURLOPT_CONV_TO_NETWORK_FUNCTION, and
CURLOPT_CONV_FROM_UTF8_FUNCTION */
CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing
or wrong format */
CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */
CURLE_SSH, /* 79 - error from the SSH layer, somewhat
generic so the error message will be of
interest when this has happened */
CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL
connection */
Daniel Stenberg
committed
CURLE_AGAIN, /* 81 - socket is not ready for send/recv,
Daniel Stenberg
committed
wait till it's ready and try again (Added
in 7.18.2) */
CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or
wrong format (Added in 7.19.0) */
Daniel Stenberg
committed
CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in
CURL_LAST /* never use! */
#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
the obsolete stuff removed! */
/* Backwards compatibility with older names */
/* The following were added in 7.17.1 */
/* These are scheduled to disappear by 2009 */
#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION
/* The following were added in 7.17.0 */
/* These are scheduled to disappear by 2009 */
#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* noone should be using this! */
#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46
#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44
#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10
#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16
#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32
#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29
#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12
#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20
#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40
#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24
#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57
#define CURLE_URL_MALFORMAT_USER CURLE_OBSOLETE4
#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED
#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE
#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR
#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL
#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS
#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR
#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED
/* The following were added earlier */
#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT
#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED
#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
/* This was the error code 50 in 7.7.3 and a few earlier versions, this
is no longer used by libcurl but is instead #defined here only to not
make programs break */
#define CURLE_ALREADY_COMPLETE 99999
#endif /*!CURL_NO_OLDIES*/
/* This prototype applies to all conversion callbacks */
typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length);
typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */
void *ssl_ctx, /* actually an
OpenSSL SSL_CTX */
void *userptr);
Daniel Stenberg
committed
typedef enum {
CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use
CONNECT HTTP/1.1 */
CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT
HTTP/1.0 */
Daniel Stenberg
committed
CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already
in 7.10 */
CURLPROXY_SOCKS5 = 5, /* added in 7.10 */
Daniel Stenberg
committed
CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */
Daniel Stenberg
committed
CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the
host name rather than the IP address. added
Daniel Stenberg
committed
in 7.18.0 */
Daniel Stenberg
committed
} curl_proxytype; /* this enum was added in 7.10 */
Daniel Stenberg
committed
#define CURLAUTH_NONE 0 /* nothing */
#define CURLAUTH_BASIC (1<<0) /* Basic (default) */
#define CURLAUTH_DIGEST (1<<1) /* Digest */
#define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */
#define CURLAUTH_NTLM (1<<3) /* NTLM */
#define CURLAUTH_DIGEST_IE (1<<4) /* Digest with IE flavour */
#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) /* all fine types set */
#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */
#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */
#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */
#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */
#define CURLSSH_AUTH_HOST (1<<2) /* host key files */
#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */
#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY
#define CURL_ERROR_SIZE 256
/* parameter for the CURLOPT_USE_SSL option */
CURLUSESSL_NONE, /* do not attempt to use SSL */
CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */
CURLUSESSL_CONTROL, /* SSL for the control connection or fail */
CURLUSESSL_ALL, /* SSL for all communication or fail */
CURLUSESSL_LAST /* not an option, never use */
} curl_usessl;
#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
the obsolete stuff removed! */
/* Backwards compatibility with older names */
/* These are scheduled to disappear by 2009 */
#define CURLFTPSSL_NONE CURLUSESSL_NONE
#define CURLFTPSSL_TRY CURLUSESSL_TRY
#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL
#define CURLFTPSSL_ALL CURLUSESSL_ALL
#define CURLFTPSSL_LAST CURLUSESSL_LAST
#define curl_ftpssl curl_usessl
#endif /*!CURL_NO_OLDIES*/
Linus Nielsen Feltzing
committed
/* parameter for the CURLOPT_FTP_SSL_CCC option */
typedef enum {
CURLFTPSSL_CCC_NONE, /* do not send CCC */
CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */
CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */
CURLFTPSSL_CCC_LAST /* not an option, never use */
} curl_ftpccc;
/* parameter for the CURLOPT_FTPSSLAUTH option */
typedef enum {
CURLFTPAUTH_DEFAULT, /* let libcurl decide */
CURLFTPAUTH_SSL, /* use "AUTH SSL" */
CURLFTPAUTH_TLS, /* use "AUTH TLS" */
CURLFTPAUTH_LAST /* not an option, never use */
} curl_ftpauth;
Daniel Stenberg
committed
/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */
typedef enum {
CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */
CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD
again if MKD succeeded, for SFTP this does
similar magic */
CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD
again even if MKD failed! */
CURLFTP_CREATE_DIR_LAST /* not an option, never use */
} curl_ftpcreatedir;
/* parameter for the CURLOPT_FTP_FILEMETHOD option */
typedef enum {
CURLFTPMETHOD_DEFAULT, /* let libcurl pick */
CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */
CURLFTPMETHOD_NOCWD, /* no CWD at all */
CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */
CURLFTPMETHOD_LAST /* not an option, never use */
} curl_ftpmethod;
/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */
#define CURLPROTO_HTTP (1<<0)
#define CURLPROTO_HTTPS (1<<1)
#define CURLPROTO_FTP (1<<2)
#define CURLPROTO_FTPS (1<<3)
#define CURLPROTO_SCP (1<<4)
#define CURLPROTO_SFTP (1<<5)
#define CURLPROTO_TELNET (1<<6)
#define CURLPROTO_LDAP (1<<7)
#define CURLPROTO_LDAPS (1<<8)
#define CURLPROTO_DICT (1<<9)
#define CURLPROTO_FILE (1<<10)
#define CURLPROTO_TFTP (1<<11)
#define CURLPROTO_ALL (~0) /* enable everything */
Daniel Stenberg
committed
/* long may be 32 or 64 bits, but we should never depend on anything else
but 32 */
#define CURLOPTTYPE_LONG 0
#define CURLOPTTYPE_OBJECTPOINT 10000
#define CURLOPTTYPE_FUNCTIONPOINT 20000
Daniel Stenberg
committed
/* name is uppercase CURLOPT_<name>,
type is one of the defined CURLOPTTYPE_<type>
#ifdef CURL_ISOCPP
#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
Daniel Stenberg
committed
#else
/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
#define LONG CURLOPTTYPE_LONG
#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT
#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
Daniel Stenberg
committed
#define CINIT(name,type,number) CURLOPT_/**/name = type + number
#endif
/*
* This macro-mania below setups the CURLOPT_[what] enum, to be used with
* curl_easy_setopt(). The first argument in the CINIT() macro is the [what]
* word.
*/
/* This is the FILE * or void * the regular output should be written to. */
/* Port number to connect to, if other than default. */
/* "name:password" to use when fetching. */
/* "name:password" to use with proxy. */
/* Range to get, specified as an ASCII string. */
/* Specified file stream to upload from (use as input): */
/* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
* bytes big. If this is not used, error messages go to stderr instead: */
/* Function that will be called to store the output (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
/* Function that will be called to read the input (instead of fread). The
* parameters will use fread() syntax, make sure to follow them. */
/* Time-out the read operation after this amount of seconds */
/* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
* how large the file being sent really is. That allows better error
* checking and better verifies that the upload was successful. -1 means
* unknown size.
*
* For large file support, there is also a _LARGE version of the key
* which takes an off_t type, allowing platforms with larger off_t
* sizes to handle larger files. See below for INFILESIZE_LARGE.
*/
/* POST static input fields. */
/* Set the FTP PORT string (interface name, named or numerical IP address)
Use i.e '-' to use default address. */
/* Set the User-Agent string (examined by some CGIs) */
/* If the download receives less than "low speed limit" bytes/second
* during "low speed time" seconds, the operations is aborted.
* You could i.e if you have a pretty high speed connection, abort if
* it is less than 2000 bytes/sec during 20 seconds.
CINIT(LOW_SPEED_LIMIT, LONG, 19),
/* Set the continuation offset.
*
* Note there is also a _LARGE version of this key which uses
* off_t types, allowing for large file offsets on platforms which
* use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
*/
/* This points to a linked list of headers, struct curl_slist kind */
/* This points to a linked list of post entries, struct curl_httppost */
/* name of the file keeping your private SSL-certificate */
/* password for the SSL or SSH private key */
CINIT(KEYPASSWD, OBJECTPOINT, 26),
/* send FILE * or void * to store headers to, if you use a callback it
is simply passed to the callback unmodified */
/* point to a file to read the initial cookies from, also enables
"cookie awareness" */
See CURL_SSLVERSION defines below. */
/* What kind of HTTP time condition to use, see defines */
/* Time to use with the above condition. Specified in number of seconds
since 1 Jan 1970 */
/* Custom request, for customizing the get command like
HTTP: DELETE, TRACE and others
FTP: to use a different list command
*/
/* HTTP request, for odd commands like DELETE, TRACE and others */
/* Pass a pointer to string of the output using full variable-replacement
as described elsewhere. */
CINIT(VERBOSE, LONG, 41), /* talk a lot */
CINIT(HEADER, LONG, 42), /* throw the header out too */
CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */
CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */
CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */
CINIT(UPLOAD, LONG, 46), /* this is an upload */
CINIT(POST, LONG, 47), /* HTTP POST method */
CINIT(DIRLISTONLY, LONG, 48), /* return bare names when listing directories */
CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */
/* Specify whether to read the user+password from the .netrc or the URL.
* This must be one of the CURL_NETRC_* enums below. */
CINIT(NETRC, LONG, 51),
CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */
CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */
CINIT(PUT, LONG, 54), /* HTTP PUT */
/* Function that will be called instead of the internal progress display
* function. This function should be defined as the curl_progress_callback
* prototype defines. */
/* We want the referrer field set automatically when following locations */
/* Port of the proxy, can be set in the proxy string as well with:
"[host]:[port]" */
/* size of the POST input data, if strlen() is not good to use */
/* tunnel non-http operations through a HTTP proxy */
CINIT(HTTPPROXYTUNNEL, LONG, 61),
/* Set the interface string to use as outgoing network interface */
CINIT(INTERFACE, OBJECTPOINT, 62),
/* Set the krb4/5 security level, this also enables krb4/5 awareness. This
* is a string, 'clear', 'safe', 'confidential' or 'private'. If the string
* is set but doesn't match one of these, 'private' will be used. */
CINIT(KRBLEVEL, OBJECTPOINT, 63),
/* Set if we should verify the peer in ssl handshake, set 1 to verify. */
CINIT(SSL_VERIFYPEER, LONG, 64),
/* The CApath or CAfile used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAINFO, OBJECTPOINT, 65),
/* 66 = OBSOLETE */
/* 67 = OBSOLETE */
/* Maximum number of http redirects to follow */
CINIT(MAXREDIRS, LONG, 68),
/* Pass a long set to 1 to get the date of the requested document (if
possible)! Pass a zero to shut it off. */
CINIT(FILETIME, LONG, 69),
/* This points to a linked list of telnet options */
CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
/* Max amount of cached alive connections */
CINIT(MAXCONNECTS, LONG, 71),
/* What policy to use when closing connections when the cache is filled
up */
CINIT(CLOSEPOLICY, LONG, 72),
/* Set to explicitly use a new connection for the upcoming transfer.
Do not use this unless you're absolutely sure of this, as it makes the
operation slower and is less friendly for the network. */
CINIT(FRESH_CONNECT, LONG, 74),
/* Set to explicitly forbid the upcoming transfer's connection to be re-used
when done. Do not use this unless you're absolutely sure of this, as it
makes the operation slower and is less friendly for the network. */
CINIT(FORBID_REUSE, LONG, 75),
/* Set to a file name that contains random data for libcurl to use to
seed the random engine when doing SSL connects. */
CINIT(RANDOM_FILE, OBJECTPOINT, 76),
/* Set to the Entropy Gathering Daemon socket pathname */
CINIT(EGDSOCKET, OBJECTPOINT, 77),
/* Time-out connect operations after this amount of seconds, if connects
are OK within this time, then fine... This only aborts the connect
phase. [Only works on unix-style/SIGALRM operating systems] */
CINIT(CONNECTTIMEOUT, LONG, 78),
/* Function that will be called to store headers (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
/* Set this to force the HTTP request to get back to GET. Only really usable
if POST, PUT or a custom request have been used first.
*/
CINIT(HTTPGET, LONG, 80),
/* Set if we should verify the Common name from the peer certificate in ssl
* handshake, set 1 to check existence, 2 to ensure that it matches the
* provided hostname. */
CINIT(SSL_VERIFYHOST, LONG, 81),
/* Specify which file name to write all known cookies in after completed
operation. Set file name to "-" (dash) to make it go to stdout. */
CINIT(COOKIEJAR, OBJECTPOINT, 82),
/* Specify which SSL ciphers to use */
CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83),
/* Specify which HTTP version to use! This must be set to one of the
CURL_HTTP_VERSION* enums set below. */
CINIT(HTTP_VERSION, LONG, 84),
/* Specifically switch on or off the FTP engine's use of the EPSV command. By
default, that one will always be attempted before the more traditional
/* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
CINIT(SSLCERTTYPE, OBJECTPOINT, 86),
/* name of the file keeping your private SSL-key */
CINIT(SSLKEY, OBJECTPOINT, 87),
/* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
CINIT(SSLKEYTYPE, OBJECTPOINT, 88),
/* crypto engine for the SSL-sub system */
CINIT(SSLENGINE, OBJECTPOINT, 89),
/* set the crypto engine for the SSL-sub system as default
the param has no meaning...
*/
CINIT(SSLENGINE_DEFAULT, LONG, 90),
/* Non-zero value means to use the global dns cache */
CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To become OBSOLETE soon */
Sterling Hughes
committed
/* DNS cache timeout */
CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
/* send linked-list of pre-transfer QUOTE commands */
CINIT(PREQUOTE, OBJECTPOINT, 93),
/* set the debug function */
CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
/* set the data for the debug function */
CINIT(DEBUGDATA, OBJECTPOINT, 95),
/* mark this as start of a cookie session */
CINIT(COOKIESESSION, LONG, 96),
/* The CApath directory used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAPATH, OBJECTPOINT, 97),
/* Instruct libcurl to use a smaller receive buffer */
CINIT(BUFFERSIZE, LONG, 98),
/* Instruct libcurl to not use any signal/alarm handlers, even when using
timeouts. This option is useful for multi-threaded applications.
See libcurl-the-guide for more background information. */
CINIT(NOSIGNAL, LONG, 99),
/* Provide a CURLShare for mutexing non-ts data */
CINIT(SHARE, OBJECTPOINT, 100),
Daniel Stenberg
committed
/* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
Daniel Stenberg
committed
CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */
CINIT(PROXYTYPE, LONG, 101),
Daniel Stenberg
committed
/* Set the Accept-Encoding string. Use this to tell a server you would like
the response to be compressed. */
CINIT(ENCODING, OBJECTPOINT, 102),
Daniel Stenberg
committed
/* Set pointer to private data */
CINIT(PRIVATE, OBJECTPOINT, 103),
/* Set aliases for HTTP 200 in the HTTP Response header */
CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
/* Continue to send authentication (user+password) when following locations,
even when hostname changed. This can potentially send off the name
and password to whatever host the server decides. */
CINIT(UNRESTRICTED_AUTH, LONG, 105),
/* Specifically switch on or off the FTP engine's use of the EPRT command ( it
also disables the LPRT attempt). By default, those ones will always be
attempted before the good old traditional PORT command. */
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_USERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(HTTPAUTH, LONG, 107),
/* Set the ssl context callback function, currently only for OpenSSL ssl_ctx
in second argument. The function must be matching the
curl_ssl_ctx_callback proto. */
CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108),
/* Set the userdata for the ssl context callback function's third
argument */
CINIT(SSL_CTX_DATA, OBJECTPOINT, 109),
Daniel Stenberg
committed
/* FTP Option that causes missing dirs to be created on the remote server.
In 7.19.4 we introduced the convenience enums for this option using the
CURLFTP_CREATE_DIR prefix.
*/
CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110),
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(PROXYAUTH, LONG, 111),
/* FTP option that changes the timeout, in seconds, associated with
getting a response. This is different from transfer timeout time and
essentially places a demand on the FTP server to acknowledge commands
in a timely manner. */
CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112),
/* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
tell libcurl to resolve names to those IP versions only. This only has
affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */
CINIT(IPRESOLVE, LONG, 113),
/* Set this option to limit the size of a file that will be downloaded from
an HTTP or FTP server.
Note there is also _LARGE version which adds large file support for
platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
CINIT(MAXFILESIZE, LONG, 114),
/* See the comment for INFILESIZE above, but in short, specifies
* the size of the file being uploaded. -1 means unknown.