git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307380 13f79535-47bb-0310-9956-ffa450edef68

so async MPMs can tell whether to keep polling and writing


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307379 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307371 13f79535-47bb-0310-9956-ffa450edef68

the httpd core) is responsible for write completion.

Note that, with this commit, the Event MPM is still doing write
completion synchronously.  I'll add async write completion as a
separate commit.

Note also that this commit breaks the (experimental) Leader/Followers
MPM on the (equally experimental) async-dev branch.  The fix is to add
either synchronous or asynchronous write completion to that MPM.  Rather
than hack in synchronous write completion, I'll revisit Leader/Followers
once I have async working in Event.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307362 13f79535-47bb-0310-9956-ffa450edef68

Correct an out-of-date comment


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307356 13f79535-47bb-0310-9956-ffa450edef68

the logger.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307346 13f79535-47bb-0310-9956-ffa450edef68

ap_core_output_filter()


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307344 13f79535-47bb-0310-9956-ffa450edef68

  - A new End-Of-Request bucket is pushed through the output filter
    chain after the last bucket of the response.
  - This bucket gets destroyed by ap_core_output_filter() after the
    buckets in front of it have been sent.
  - The destroy callback of the EOR bucket invokes the access logger
    and frees the request's pool.

With this change, the request logger now runs after the last byte of
the response is _sent_, rather than after the last byte of the response
is _generated_.  This should make the bytes-sent count in the access
log more accurate in cases where the client closes the connection
midway through the sending of the response.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307339 13f79535-47bb-0310-9956-ffa450edef68

the async-dev branch


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@307334 13f79535-47bb-0310-9956-ffa450edef68

the async-dev branch, in preparation for developing async write
completion in this branch on top of the new timeout design.
http://svn.apache.org/viewcvs.cgi?rev=306495&view=rev


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@306541 13f79535-47bb-0310-9956-ffa450edef68

port the fix for PR35292 forward from the 2.3 trunk to the async-dev branch, because one of the perl-framework test cases now checks for this fix

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@306540 13f79535-47bb-0310-9956-ffa450edef68

forward-port the latest versions of mod_ssl and mod_setenvif from the 2.3 trunk to the async-dev branch so t/TEST will work once again

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@306538 13f79535-47bb-0310-9956-ffa450edef68

The big change is that it now does nonblocking writes when possible.  The
goal of this redesign is to more cleanly support asynchronous write completion
in MPMs such as Event or Leader.  However, the nonblocking writes may also
help in Worker and Prefork by allowing more overlapping of handler and
output filter processing with network writes.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@291377 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@291375 13f79535-47bb-0310-9956-ffa450edef68

interact with the async R&D, but I'm merging it into the async-dev branch
because there's now a test case specifically for this change in
httpd-test/perl-framework.)


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@291354 13f79535-47bb-0310-9956-ffa450edef68

the new io_multiplexer object is intended to provide a
foundation for async processing of the other connection
states.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@280222 13f79535-47bb-0310-9956-ffa450edef68

Also, core_create_conn() now initializes the conn_state within the newly
created connection.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@280221 13f79535-47bb-0310-9956-ffa450edef68

*) Put an example of using it into the Event MPM, which just calls the original core output filter.  


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@278652 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/async-dev@278647 13f79535-47bb-0310-9956-ffa450edef68

what verification is done by the proxy in the proxy-to-SSL-server
case.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265741 13f79535-47bb-0310-9956-ffa450edef68

(1.3 has done that for a while)


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265737 13f79535-47bb-0310-9956-ffa450edef68

returned by X509_LOOKUP_add_dir or X509_LOOKUP_load_file to detect
malformed or misconfigured CRLs.  Clear error stack beforehand to
ensure reported errors are relevant.

PR: 36438


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265702 13f79535-47bb-0310-9956-ffa450edef68

variable at function-scope.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265701 13f79535-47bb-0310-9956-ffa450edef68

Initiliase all of the first_*_limit variables to zero, so that we can actually
raise limits beyond their defaults reliably. 



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265523 13f79535-47bb-0310-9956-ffa450edef68

Revert one part. I should have tested seperately. This line isn't neccessary.



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265519 13f79535-47bb-0310-9956-ffa450edef68

Actually allow the admin to set thread_limit higher than the default. 

Also, initialise the first_ variables, since they are tested in the
set_ functions.



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265518 13f79535-47bb-0310-9956-ffa450edef68

a function I think, especially with the fact that
the mapping of getpid() to APR_PID_T_FMT isn't
consistant in some areas. 


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265506 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265505 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265504 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265049 13f79535-47bb-0310-9956-ffa450edef68

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265047 13f79535-47bb-0310-9956-ffa450edef68

versions 1.2.0 or higher.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@265033 13f79535-47bb-0310-9956-ffa450edef68

broke all the -Werror builds.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264886 13f79535-47bb-0310-9956-ffa450edef68

Make my PR references consistent with everyone elses.



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264881 13f79535-47bb-0310-9956-ffa450edef68

PR: 34264


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264866 13f79535-47bb-0310-9956-ffa450edef68

* modules/ssl/ssl_engine_kernel.c (ssl_hook_Access): Ensure that
renegotiation is performed for a transition from "SSLVerifyClient
optional" to "SSLVerifyClient require".

The boolean "verify_old & SSL_VERIFY_PEER_STRICT" is true if the old
context merely has optional verification configured, since the
definition of SSL_VERIFY_PEER_STRICT is
(SSL_VERIFY_FAIL_IF_NO_PEER_CERT | SSL_VERIFY_PEER).


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264800 13f79535-47bb-0310-9956-ffa450edef68

If uid_t and gid_t are unsigned on a platform (hurd, for example), using -1
may cause a compiler warning. 



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264788 13f79535-47bb-0310-9956-ffa450edef68

Fix PR36410; Change how the get_suexec_identity hook is handled by CGID.
Instead of using mod_userdir and mod_suexec specific hacks, we now run the hook
on the httpd side of the handler. 

If this is NULL, we pass on a magic empty_ugid constant, otherwise pass on the
real ugid.

On the cgid side of the equation, we add our own hook, with REALLY_FIRST, and
then order the hooks. This ensures that cgid's doer runs before any other
registered get_suexec_identity doers.

We use cgid's request config to store the ugid. If ugid == empty_ugid, we DON'T
call ap_os_create_privileged_process, because our doer would return the magic
empty_ugid constant. Having the doer return NULL is no good, because then
userdir and mod_suexec's doers would be called. Instead, we call plain old
apr_proc_create(). 



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264759 13f79535-47bb-0310-9956-ffa450edef68

reached.


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264737 13f79535-47bb-0310-9956-ffa450edef68

  Correct mod_cgid's argv[0] so that the full path can be delved by the
  invoked cgi application, to conform to the behavior of mod_cgi.

PR: 34542
Reviewed by: Andre, OtherBill
Submitted by: Pradeep Kumar S <pradeep.smani gmail.com>



git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@264623 13f79535-47bb-0310-9956-ffa450edef68