CHANGES

  *) Get the Unix MPM's to do a graceful restart again.  If we are going
     to register a cleanup with ap_cleanup_scoreboard, then we have to
     kill the cleanup with the same function,  and that function can't be
     static.  [Ryan Bloom]

  *) Install all required header files.  Without these, it was not
     possible to compile some modules outside of the server.
     [Ryan Bloom]

  *) Fix the AliasMatch directive in Apache 2.0.  When we brought a patch
     forward from 1.3 to 2.0, we missed a single line, which broke regex
     aliases.  [Ryan Bloom]

  *) We have a poor abstraction in the protocol.  This is a temporary
     hack to fix the bug, but it will need to be fixed for real.  If
     we find an error while sending out a custom error response, we back
     up to the first non-OK request and send the data.  Then, when we send
     the EOS from finalize_request_protocol, we go to the last request,
     to ensure that we aren't sending an EOS to a request that has already
     received one.  Because the data is sent on a different request than
     the EOS, the error text never gets sent down the filter stack.  This
     fixes the problem by finding the last request, and sending the data
     with that request.  [Ryan Bloom]

  *) Make the server status page show the correct restart time, and
     thus the proper uptime. [Ryan Bloom]

  *) Move the CGI creation logic from mod_include to mod_cgi(d).  This
     should reduce the amount of duplicate code that is required to
     create CGI processes.
     [Paul J. Reder <rederpj@raleigh.ibm.com>]

  *) ap_new_connection() closes the socket and returns NULL if a socket
     call fails.  Usually this is due to a connection which has been 
     reset.  [Jeff Trawick]

  *) Move the Apache version information out of httpd.h and into release.h.
     This is in preparation for the first tag with the new tag and release
     system.  [Ryan Bloom]

  *) Begin restructuring scoreboard code to enable adding back in
     the ability to use IPC other than shared memory.
     Get mod_status working on Windows again. [Bill Stoddard]

  *) Make mod_status work with 2.0.  This will work for prefork,
     mpmt_pthread, and dexter.  [Ryan Bloom]

  *) Correct a typo in httpd.conf.
     [Kunihiro Tanaka <tanaka@apache.or.jp>] PR#7154 

  *) Really fix mod_rewrite map lookups this time. [Tony Finch]

  *) Get the correct IP address if ServerName isn't set and we can't
     find a fully-qualified domain name at startup.
     PR#7170 [Danek Duvall <dduvall@eng.sun.com>]

  *) Make mod_cgid work with SuExec.  [Ryan Bloom]

  *) Adopt apr user/group name features for mod_rewrite.  Eliminates some
     'extra' stat's for user/group since they should never occur, and now
     resolves the SCRIPT_USER and SCRIPT_GROUP, including on WinNT NTFS
     volumes.  [William Rowe]

  *) Adopt apr features to simplify mod_includes.  This changes the
     behavior of the USER_NAME variable, unknown uid's are now reported
     as USER_NAME="<unknown>" rather than the old user#000 result.
     WinNT now resolves USER_NAME on NTFS volumes.  [William Rowe]

  *) Adopt apr features for simplifing mod_userdir, and accept the new
     Win32/OS2 exceptions without hiccuping.  [William Rowe]

  *) Replace configure --with-optim option by using and saving the
     environment variable OPTIM instead.  This is needed because configure
     options do not support multiple flags separated by spaces.
     [Roy Fielding]

  *) Fix some byterange handling.  If we get a byte range that looks like
     "-999999" where that is past the end of the file, we should return 
     a PARTIAL CONTENT status code, and return the whole file as one big
     byterange.  This matches the 1.3 handling now.  [Ryan Bloom]

  *) Make the error bucket a real meta-data bucket.  This means that the
     bucket length is 0, and a read returns NULL data.  If one of these
     buckets is passed down after the headers are sent, this data will
     just be ignored.  [Greg Stein]

  *) The prefork MPM wasn't killing child processes correctly if a restart
     signal was received while the process was serving a request.  The child
     process would become the equivalent of a second parent process.  If
     we break out of the accept loop, then we need to do die after cleaning
     up after ourselves.  [Ryan Bloom]

  *) Change the Prefork MPM to use SIGWINCH instead of SIGUSR1 for graceful
     restarts.  [Ryan Bloom]

  *) Modify the apr_stat/lstat/getfileinfo calls within apache to use
     the most optimal APR_FINFO_wanted bits.  This spares Win32 from
     performing very expensive owner, group and permission lookups
     and allows the server to function until these apr_finfo_t fields
     are implemented under Win32.  [William Rowe]

  *) Support for typedsafe optional functions - that is functions exported by
     optional modules, which, therefore, may or may not be present, depending
     on configuration. See the experimental modules mod_optional_fn_{ex,im}port
     for sample code. [Ben Laurie]

  *) filters can now report an HTTP error to the server.  This is done
     by sending a brigade where the first bucket is an error_bucket.
     This bucket is a simple bucket that stores an HTTP error and
     a string.  Currently the string is not used, but it may be needed
     to output an error log.  The http_header_filter will find this
     bucket, and output the error text, and then return 
     AP_FILTER_ERROR, which informs the server that the error web page
     has already been sent.  [Ryan Bloom]

  *) If we get an error, then we should remove all filters except for
     those critical to serving a web page.  This fixes a bug, where
     error pages were going through the byterange filter, even though
     that made no sense.  [Ryan Bloom]

  *) Relax the syntax checking of Host: headers in order to support
     iDNS. PR#6635 [Tony Finch]

  *) Cleanup the byterange filter to use the apr_brigade_partition
     and apr_bucket_copy functions.  This removes a lot of very messy
     code, and hopefully makes this filter more stable.
     [Ryan Bloom]

  *) Remove AddModule and ClearModuleList directives.  Both of these
     directives were used to ensure that modules could be enabled
     in the correct order.  That requirement is now gone, because
     we use hooks to ensure that modules are in the correct order.
     [Ryan Bloom]

  *) When SuExec is specified, we need to add it to the list of
     targets to be built.  If we don't, then any changes to the
     configuration won't affect SuExec, unless 'make suexec' is
     specifically run.  [Ryan Bloom]

  *) Cleaned out open_file from mod_file_cache, as apr now accepts
     the APR_XTHREAD argument to open a file for consumption by
     parallel threads on win32.  [William Rowe]

  *) Correct a bug in determining when we follow symlinks.  The code
     expected a stat -1 result, not an apr_status_t positive error.
     Also check if the APR_FINFO_USER fields are valid before we
     follow the link.  [William Rowe]

  *) Move initgroupgs, ap_uname2id and ap_gname2id from util.c to
     mpm_common.c.  These functions are only valid on some platforms,
     so they should not be in the main-line code. [Ryan Bloom]

  *) Remove ap_chdir_file().  This function is not thread-safe,
     and nobody is currently using it.  [Ryan Bloom]

  *) Do not try to run make depend if there are no .c files in the
     current directory, doing so makes `make depend` fail.
     [Ryan Bloom]

   *) Update highperformance.conf to work with either prefork or
      pthreads mpms.  [Greg Ames] 

  *) Stop checking to see if this is a pipelined request if we know
     for a fact that it isn't.  Basically, if r->connection->keepalive == 0.
     This keeps us from making an extra read call when serving a 1.0
     request.  [Ryan Bloom and Greg Stein]

  *) Fix the handling of variable expansion look-ahead in mod_rewrite,
     i.e. syntax like %{LA-U:REMOTE_USER}, and also fix the parsing of
     more complicated nested RewriteMap lookups. PR#7087 [Tony Finch]

  *) Fix the RFC number mentioned when complaining about a missing
     Host: header. PR#7079 [Alexey Toptygin <alexeyt@wam.umd.edu>]

  *) Fix an endless loop in ab which occurred when ab was posting
     and the server dropped the connection unexpectedly.
     [Jeff Trawick]

  *) Fix a segfault while handling request bodies in ap_http_filter().  
     This problem has been seen with mod_dav usage as well as with 
     requests where the body was just being discarded.  [Jeff Trawick]

  *) Some adjustment on the handling and automatic setting (via
     hints.m4) of various compilation flags (eg: CFLAGS). Also,
     add the capability to specify flags (NOTEST_CFLAGS and
     NOTEST_LDFLAGS) which are used to compile Apache, but
     not used during the configuration process. Useful for
     flags like "-Werror". [Jim Jagielski]

  *) Stop using environment variables to force debug mode or
     no detach.  We now use the -D command line argument to 
     specify the correct mode.  -DONE_PROCESS and -DNO_DETACH.
     [Greg Stein, Ryan Bloom]

  *) Change handlers to use hooks. [Ben Laurie]

  *) Stop returning copies of filenames from both apr_file_t and
     apr_dir_t.  We pstrdup the filenames that we store in the
     actual structures, so we don't need to pstrdup the strings again.
     [Ryan Bloom]

  *) mod_cgi: Fix some problems where the wrong error value was being
     traced.  [Jeff Trawick]

  *) EBCDIC: Fix some missing ASCII conversion on some protocol data.
     [Jeff Trawick]

  *) Add generic hooks. [Ben Laurie]

  *) Use a real pool to dup the error log descriptor.  [Ryan Bloom]

  *) Fix a segfault caused by mod_ext_filter when the external filter 
     program does not exist. [Jeff Trawick]

  *) Fix an output truncation error when on an HTTP >= 1.0 request an
     object of size between DEFAULT_BUCKET_SIZE and AP_MIN_BYTES_TO_WRITE 
     was served through mod_charset_lite (or anything else that would
     create a transient bucket in this size range).  ap_bucket_make_heap()
     silently failed (fixed), transient_setaside() discovered it, but
     ap_save_brigade() ignored it (fixed). [Jeff Trawick]
     
  *) Ignore \r\n or \n when using PEEK mode for input filters.  The problem
     is that some browsers send extra lines at the end of POST requests, and
     we don't want to delay sending data back to the user just because the
     browser isn't well behaved. [Ryan Bloom]

  *) Get SuEXEC working again.  We can't send absolute paths to suExec
     because it refuses to execute those programs.  SuEXEC also wasn't
     always recognizing configuration changes made using the autoconf
     setup.  [Ryan Bloom]

  *) Allow the buildconf process to find the config.m4 files in the correct
     order.  Basically, we can now name config.m4 files as config\d\d.m4,
     and we will sort them correctly when inserting them into the build
     process.  [Ryan Bloom]

  *) Get mod_cgid to use apr calls for creating the actual CGI process.
     This also allows mod_cgid to use ap_os_create_priviledged_process,
     thus allowing for SuExec execution from mod_cgid.  Currently, we do
     not support everything that standard SuExec supports, but at least
     it works minimally now. [Ryan Bloom]

  *) Allow SuExec to be configured from the ./configure command line.
     [Ryan Bloom]

  *) Update some of the docs in README and INSTALL to reflect some of
     the changes in Apache 2.0 [Cliff Woolley <cliffwoolley@yahoo.com>]

  *) If we get EAGAIN returned from the call to apr_sendfile, then we
     need to call sendfile again.  This gets us serving large files
     such as apache_2.0a9.tar.gz on FreeBSD again. [Ryan Bloom]

  *) Get the support programs building cleanly again.
     [Cliff Woolley <cliffwoolley@yahoo.com>]

  *) The Apache/Win32 Apache.exe and dll's now live in bin.  The 
     current directory logic now backs up over bin/ to determine the
     server root from the Apache.exe path.

  *) Apache/Win32 now follows the standard conventions of mod_foo.so
     loadable modules, dynamic libs are all named libfoo.dll, and the
     makefile.win populates the include, lib and libexec directories.

  *) Apache is now IPv6-capable.  On systems where APR supports IPv6,
     Apache gets IPv6 listening sockets by default.  Additionally, the
     Listen, NameVirtualHost, and <VirtualHost> directives support IPv6
     numeric address strings (e.g., "Listen [fe80::1]:8080").
     [Jeff Trawick]

  *) Modify the install directory layout.  Modules are now installed in
     modules/.  Shared libraries should be installed in libraries/, but
     we don't have any of those on Unix yet.  All install directories
     are modifyable at configure time. [Ryan Bloom]

  *) Install all header files in the same directory on Unix. [Ryan Bloom]

  *) Get the functions in server/linked into the server, regardless of
     which modules linked into the server.  This uses the same hack 
     for Apache that we use for APR and apr-util to ensure all of the
     necessary functions are linked.  As a part of thise, the CHARSET_EBCDIC
     was renamed to AP_CHARSET_EBCDIC for namespace protection, and to make
     the scripts a bit easier.
     [Ryan Bloom]

  *) Rework the RFC1413 handling to make it thread-safe, use a timeout
     on the query, and remove IPv4 dependencies.  [Jeff Trawick]

  *) Get all of the auth modules to the point that they will install and
     be loadable into the server.  Our new build/install mechanism expects
     that all modules will have a common name format.  The auth modules 
     didn't use that format, so we didn't install them properly.
     [Ryan Bloom]

  *) API routines ap_pgethostbyname() and ap_pduphostent() are no longer
     available.  Use apr_getaddrinfo() instead.  [Jeff Trawick]

  *) Get "NameVirtualHost *" working in 2.0.  [Ryan Bloom]

  *) Return HTTP_RANGE_NOT_SATISFIABLE if the every range requested starts
     after the end of the response. [Ryan Bloom]

  *) Get byterange requests working with responses that do not have a
     content-length.  Because of the way byterange requests work, we have to
     have all of the data before we can actually do the byterange, so we
     can compute the content-length in the byterange filter.
     [Ryan Bloom]

  *) Get exe CGI's working again on Windows.
     [Allan Edwards]

  *) Get mod_cgid and mod_rewrite to work as DSOs by changing the way
     they keep track of whether or not their  post config hook has been
     called before.  Instead of a static variable (which is replaced when 
     the DSO is loaded a second time), use userdata in the process pool.
     [Jeff Trawick]

Changes with Apache 2.0a9

  *) Win32 now requires perl to complete the final install step for users
     to build + install on Win32.  Makefile.win now rewrites @@ServerRoot@
     and installs the conf, htdocs and htdocs/manual directories.
     [William Rowe]

  *) Make mod_include use a hash table to associate directive tags with
     functions.  This allows modules to implement their own SSI tags easily.
     The idea is simple enough, a module can insert it's own tag and function
     combination into a hash table provided by mod_include.  While mod_include
     parses an SSI file, when it encounters a tag in the file, it does a
     hash lookup to find the function that implements that tag, and passes
     all of the relevant data to the function.  That function is then
     responsible for processing the tag and handing the remaining data back
     to mod_include for further processing.
     [Paul J. Reder <rederpj@raleigh.ibm.com>]

  *) Get rid of ap_new_apr_connection().  ap_new_connection() now has 
     fewer parameters: the local and remote socket addresses were removed
     from the parameter list because all required information is available
     via the APR socket.  [Jeff Trawick]

  *) Distribution directory structure reorganized to reflect a
     normal source distribution with external install targets.
     [Roy Fielding]

  *) The MPMs that need multiple segments of shared memory now create
     two apr_shmem_t variables, one for each shared memory allocation.
     the problem is that we can't determine how much memory will be required
     for shared memory allocations once we try to allocate more than one
     variable.  The MM code automatically aligns the shared memory allocations,
     so we end up needing to pad the amount of shared memory we want based
     on how many variables will be allocated out of the shared memory segment.
     It is just easier to create a second apr_shmem_t variable, and two
     shmem memory blocks.
     [Ryan Bloom]

  *) Cleanup the export list a bit.  This creates a single unified list of
     functions exported by APR.  The export list is generated at configure
     time, and that list is then used to generate the exports.c file.
     Because of the way the export list is generated, we only export those
     functions that are valid on the platform we are building on.
     [Ryan Bloom]

  *) Enable logging the cookie with mod_log_config
     [Sander van Zoest <sander@covalent.net>]

  *) Fix a segfault in mod_info when it reaches the end of the configuration.
     [Jeff Trawick]

  *) Added lib/aputil/ as a placeholder for utility functions which are not
     specific to the Apache HTTP Server (but do not make sense with APR).
     The first utility is "apu_dbm": a set of functions to work with DBM
     files. This first version can be compiled for SDBM or GDBM databases.
     [Greg Stein]

  *) Complete re-write of mod_include.  This makes mod_include a filter that
     uses buckets directly.  This has now served the FAQ correctly.
     [Paul Reder <rederpj@raleigh.ibm.com>]

  *) Allow modules to specify the first filter in a sub_request when
     making the sub_request.  This keeps modules from having to change the
     output_filter immediately after creating the sub-request, and therefore
     skip the sub_req_output_filter.  [Ryan Bloom]

  *) Update ab to accept URLs with IPv6 literal address strings (in the
     format described in RFC 2732), and to build Host header fields in
     the same format.  This allows IPv6 literal address strings to be
     used with ab.  This support has been tested against Apache 1.3 with 
     the KAME patch, but Apache 2.0 does not yet work with this format
     of the Host header field.  [Jeff Trawick]

  *) Accomodate an out-of-space condition in the piped logs and the
     rotatelogs.c code, and no longer churn log processes for this
     condition.  [Victor J. Orlikowski]

  *) Add support for partial writes with apr_sendfile() to core_output_filter.
     [Greg Ames] 

Changes with Apache 2.0a8

  *) Add a directive to mod_mime so that filters can be associated with
     a given mime-type.
     [Ryan Bloom]

  *) Get multi-views working again.  We were setting the path_info
     field incorrectly if we couldn't find the specified file.
     [Ryan Bloom]

  *) Fix 304 processing.  The core should never try to send the headers
     down the filter stack.  Always, just setup the table in the request
     record, and let the header filter convert it to data that is ready
     for the network.
     [Ryan Bloom]

  *) More fixes for the proxy.  There are still bugs in the proxy code,
     but this has now proxied www.yahoo.com and www.ntrnet.net (my ISP)
     successfully.
     [Ryan Bloom]

  *) Fix params for apr_getaddrinfo() call in connect proxy handler.
     [Chuck Murcko]

  *) APR: Add new apr_getopt_long function to handle long options.
     [B. W. Fitzpatrick <fitz@red-bean.com>]

  *) APR: Change apr_connect() to take apr_sockaddr_t instead of hostname.
     Add generic apr_create_socket().  Add apr_getaddrinfo() for doing
     hostname resolution/address string parsing and building
     apr_sockaddr_t.  Add apr_get_sockaddr() for getting the address
     of one of the apr_sockaddr_t structures for a socket.  Change
     apr_bind() to take apr_sockaddr_t.  [David Reid and Jeff Trawick]

  *) Remove the BUFF from the HTTP proxy.  This is still a bit ugly, but
     I have proxied pages with it, cleanup will commence soon.
     [Ryan Bloom]

  *) Make the proxy work with filters.  This isn't perfect, because we
     aren't dealing with the headers properly.  [Ryan Bloom]

  *) Do not send a content-length iff the C-L is 0 and this is a head
     request.  [Ryan Bloom]

  *) Make cgi-bin work as a regular directory when using mod_vhost_alias
     with no VirtualScriptAlias directives. PR#6829 [Tony Finch]

  *) Remove BUFF from the PROXY connect handling. [Ryan Bloom]

  *) Get the default_handler to stop trying to deal with HEAD requests.
     The idea is to let the content-length filter compute the C-L before
     we try to send the data.  If we can get the C-L correctly, then we
     should send it in the HEAD response.
     [Ryan Bloom]
     
  *) The Header filter can now determine if a body should be sent based
     on r->header_only.  The general idea of this is that if we delay
     deciding to send the body, then we might be able to compute the
     content-length correctly, which will help caching proxies to cache
     our data better.  Any handler that doesn't want to try to compute
     the content-length can just send an EOS bucket without data and
     everything will just work.
     [Ryan Bloom]

  *) Add the referer to the error log if one is available.
     [Markus Gyger <mgyger@itr.ch>]

  *) Mod_info.c has now been ported to Apache 2.0.  As a part of this
     change, the root of the configuration tree has been exposed to modules
     as ap_conftree.
     [Ryan Morgan <rmorgan@covalent.net>]

  *) Get the core_output_filter to use the bucket interface directly.
     This keeps us from calling the content-length filter multiple times
     for a simple static request.
     [Ryan Bloom]

  *) We are sending the content-type correctly now.
     [Ryan Bloom and Will Rowe]

  *) APR on FreeBSD: Fix a bug in apr_sendfile() which caused us to report
     a bogus bytes-sent value when the only thing being sent was trailers
     and writev() returned an error (or EAGAIN).  [Jeff Trawick]

  *) Get SINGLE_LISTEN_UNSERIALIZED_ACCEPT working again.  This uses the
     hints file to determine which platforms define 
     SINGLE_LISTEN_UNSERIALIZED_ACCEPT.
     [Ryan Bloom]

  *) APR: add apr_get_home_directory()  [Jeff Trawick]

  *) Initial import of 1.3-current mod_proxy. [Chuck Murcko]

  *) Not all platforms have INADDR_NONE defined by default.  Apache
     used to make this check and define INADDR_NONE if appropriate,
     but APR needs the check too, and I suspect other applications will
     as well.  APR now defines APR_INADDR_NONE, which is always a valid
     value on all platforms.
     [Branko Èibej <brane@xbc.nu>]

  *) Destroy the pthread mutex in lock_intra_cleanup() for PR#6824.
     [Shuichi Kitaguchi <ki@hh.iij4u.or.jp>] 

  *) Relax the syntax checking of Host: headers in order to support
     iDNS. PR#6635 [Tony Finch]

  *) When reading from file buckets we convert to an MMAP if it makes
     sense.  This also simplifies the default handler because the
     default handler no longer needs to try to create MMAPs.
     [Ryan Bloom]

  *) BUFF has been removed from the main server.  The BUFF code will remain
     in the code until it has been purged from the proxy module as well.
     [Ryan Bloom]

  *) Byteranges have been completely re-written to be a filter.  This
     has been tested, and I believe it is working correctly, but it could
     doesn't work for the Adobe Acrobat plug-in.  The output almost matches
     the output from 1.3, the only difference being that 1.3 includes
     a content-length in the response, and this does not.
     [Ryan Bloom]

  *) APR read/write functions and bucket read functions now operate
     on unsigned integers, instead of signed ones.  It doesn't make
     any sense to use signed ints, because we return the error codes,
     so if we have an error we should report 0 bytes read or written.
     [Ryan Bloom]

  *) Always compute the content length, whether it is sent or not.
     The reason for this, is that it allows us to correctly report
     the bytes_sent when logging the request.  This also simplifies
     content-length filter a bit, and fixes the actual byte-reporing
     code in mod_log_config.c
     [Ryan Bloom]

  *) Remove AP_END_OF_BRIGADE definition.  This does not signify what
     it says, because it was only used by EOS and FLUSH buckets.  Since
     neither of those are required at the end of a brigade, this was
     really signifying FLUSH_THE_DATA, but that can be determined better
     by checking AP_BUCKET_IS_EOS() or AP_BUCKET_IS_FLUSH.  EOS and FLUSH
     buckets now return a length of 0, which is actually the amount of data
     read, so they make more sense.
     [Ryan Bloom]

  *) Allow the core_output_filter to save some data past the end of a
     request.  If we get an EOS bucket, we only send the data if it 
     makes sense to send it.  This allows us to pipeline request
     responses.  As a part of this, we also need to allocate mmap
     buckets out of the connection pool, not the request pool.  This
     allows the mmap to outlive the request.
     [Ryan Bloom]

  *) Make blocking and non-blocking bucket reads work correctly for
     sockets and pipes.  These are the only bucket types that should
     have non-blocking reads, because the other bucket types should
     ALWAYS be able to return something immediately.
     [Ryan Bloom]

  *) In the Apache/Win32 console window, accept Ctrl+C to stop the 
     server, but use Ctrl+Break to initiate a graceful restart 
     instead of duplicating behavior. [John Sterling]

  *) Patch mod_autoindex to set the Last-Modified header based on
     the directory's mtime, and add the ETag header.  [William Rowe]

  *) Merge the 1.3 patch to add support for logging query string in 
     such a way that "%m %U%q %H" is the same as "%r".
     [Bill Stoddard]

  *) Port three log methods from mod_log_config 1.3 to 2.0: 
     CLF compliant '-' byte count, method and protocol.
     [Bill Stoddard]

  *) Add a new LogFormat directive, %c, that will log connection
     status at the end of the response as follows:
     'X' - connection aborted before the response completed.
     '+' - connection may be kept-alive by the server.
     '-' - connection will be closed by the server.
     [Bill Stoddard]

  *) Expand APR for WinNT to fully accept and return utf-8 encoded
     Unicode file names and paths for Win32, and tag the Content-Type 
     from mod_autoindex to reflect that charset if the the feature
     macro APR_HAS_UNICODE_FS is true.  [William Rowe]

  *) Compute the content length (and add appropriate header field) for
     the response when no content length is available and we can't use 
     chunked encoding.  [Jeff Trawick]

  *) Changed ap_discard_request_body() to use REQUEST_CHUNKED_DECHUNK,
     so that content input filters get dechunked data when using
     the default handler. Also removed REQUEST_CHUNKED_PASS.
     [Sascha Schumann]
     
  *) Add mod_ext_filter as an experimental module.  This module allows
     the administrator to use external programs as filters.  Currently,
     only filtering of output is supported.  [Jeff Trawick]

  *) Most Apache functions work on EBCDIC machines again, as protocol
     data is now translated (again).  [Jeff Trawick]

  *) Introduce ap_xlate_proto_{to|from}_ascii() to clean up some of
     the EBCDIC support.  They are noops on ASCII machines, so this
     type of translation doesn't have to be surrounded by #ifdef
     CHARSET_EBCDIC.  [Jeff Trawick]

  *) Fix mod_include.  tag commands work again, and the server will
     send the FAQ again.  This also allows mod_include to set aside
     buckets that include partial buckets.
     [Ryan Bloom and David Reid]

  *) Add suexec support back.  [Manoj Kasichainula]

  *) Lingering close now uses the socket directly instead of using
     BUFF.  This has been tested, but since all we can tell is that it
     doesn't fail, this needs to be really hacked on.
     [Ryan Bloom]

  *) Allow filters to modify headers and have those headers be sent to
     the client.  The idea is that we have an http_header filter that
     actually sends the headers to the network.  This removes the need
     for the BUFF to send headers.
     [Ryan Bloom]

  *) Charset translation: mod_charset_lite handles translation of
     request bodies.  Get rid of the xlate version of ap_md5_digest()
     since we don't compute digests of filtered (e.g., translated) 
     response bodies this way anymore.  (Note that we don't do it at
     all at the present; somebody needs to write a filter to do so.)
     [Jeff Trawick]

  *) Input filters and ap_get_brigade() now have a input mode parameter 
     (blocking, non-blocking, peek) instead of a length parameter.
     [hackathon]

  *) Update the mime.types file to the registered media types as
     of 2000-10-19. PR#6613 [Carsten Klapp <carsten.klapp@home.net>,
     Tony Finch]

  *) Namespace protect some macros declared in ap_config.h
     [Ryan Bloom]

  *) Support HTTP header line folding with input filtering.
     [Greg Ames]

  *) Mod_include works again.  This should still be re-written, but at
     least now we can serve an SHTML page again.
     [Ryan Bloom]

  *) Begin to remove BUFF from the core.  Currently, we keep a pointer
     to both the BUFF and the socket in the conn_rec.  Functions that
     want to use the BUFF can, functions that want to use the socket,
     can.  They point to the same place.
     [Ryan Bloom]

  *) apr_psprintf doesn't understand %lld as a format.  Make it %ld.
     [Tomas "Ögren" <stric@ing.umu.se>]

  *) APR pipes on Unix and Win32 are now cleaned up automatically when the 
     associated pool goes away.  (APR pipes on OS/2 were already had this
     logic.)  This resolvs a fatal file descriptor leak with CGIs.  
     [Jeff Trawick]

  *) The final line of the config file was not being read if there was
     no \n at the end of it.  This was caused by apr_fgets returning 
     APR_EOF even though we had read valid data.  This is solved by
     making cfg_getline check the buff that was returned from apr_fgets.
     If apr_fgets return APR_EOF, but there was data in the buf, then we
     return the buf, otherwise we return NULL.
     [Ryan Bloom]

  *) Piped logs work again in the 2.0 series.
     [Ryan Bloom]

  *) Restore functionality broken by the mod_rewrite security fix:
     rewrite map lookup keys and default values are now expanded
     so that the lookup can depend on the requested URI etc.
     PR #6671 [Tony Finch]

  *) Tighten up the syntax checking of Host: headers to fix a
     security bug in some mass virtual hosting configurations
     that can allow a remote attacker to retrieve some files
     on the system that should be inaccessible. [Tony Finch]

  *) Add a pool bucket type.  This bucket is used for data allocated out
     of a pool.  If the pool is cleaned before the bucket is destroyed, then
     the data is converted to a heap bucket, allowing it to survive the
     death of the pool.
     [Ryan Bloom]

  *) Add a flush bucket.  This allows modules to signal that the filters
     should all flush whatever data they currently have.  There is no way
     to actually force them to do this, so if a filter ignores this bucket,
     that's life, but at least we can try with this.
     [Ryan Bloom]

  *) Add an output filter for sub-requests.  This filter just strips the
     EOS bucket so that we don't confuse the main request's core output
     filter by sending multiple EOS buckets.  This change also makes sub
     requests start to send EOS buckets when they are finished.
     [Ryan Bloom]

  *) Make ap_bucket_(read|destroy|split|setaside) into macros.  Also
     makes ap_bucket_destroy a return void, which is okay because it
     used to always return APR_SUCCESS, and nobody ever checked its
     return value anyway.
     [Cliff Woolley <cliffwoolley@yahoo.com>]

  *) Remove the index into the bucket-type table from the buckets
     structure.  This has now been replaced with a pointer to the
     bucket_type.  Also add some macros to test the bucket-type.
     [Ryan Bloom]

  *) Renamed all MODULE_EXPORT symbols to AP_MODULE_DECLARE and all symbols
     for CORE_EXPORT to AP_CORE_DECLARE (namespace protecting the wrapper)
     and retitled API_EXPORT as AP_DECLARE and APR_EXPORT as APR_DECLARE.
     All _VAR_ flavors changes to _DATA to be absolutely clear.
     [William Rowe]

  *) Add support for /, //, //servername and //server/sharename 
     parsing of <Directory> blocks under Win32 and OS2.
     [Tim Costello, William Rowe, Brian Harvard]

  *) Remove the function pointers from the ap_bucket type.  They have been
     replaced with a global table.  Modules are allowed to register bucket
     types and use then use those buckets.
     [Ryan Bloom]

  *) mod_cgid: In the handler, shut down the Unix socket (only for write) 
     once we finish writing the request body to the cgi child process; 
     otherwise, the client doesn't hit EOF on stdin.  Small request bodies 
     worked without this change (for reasons I don't understand), but large 
     ones didn't.  [Jeff Trawick]

  *) Remove file bucket specific information from the ap_bucket type.
     This has been moved to a file_bucket specific type that hangs off
     the data pointer in the ap_bucket type.
     [Ryan Bloom]

  *) Input filtering now has a third argument.  This is the amount of data
     to read from lower filters.  This argument can be -1, 0, or a positive
     number.  -1 means give me all the data you have, I'll deal with it and
     let you know if I need more.  0 means give me one line and one line
     only.  A positive number means I want no more than this much data.

     Currently, only 0 and a positive number are implemented.  This allows
     us to remove the remaining field from the conn_rec structure, which
     has also been done.
     [Ryan Bloom] 
    
  *) Big cleanup of the input filtering.  The goal is that http_filter
     understands two conditions, headers and body.  It knows where it is
     based on c->remaining.  If c->remaining is 0, then we are in headers,
     and http_filter returns a line at a time.  If it is not 0, then we are
     in body, and http_filter returns raw data, but only up to c->remaining
     bytes.  It can return less, but never more.
     [Greg Ames, Ryan Bloom, Jeff Trawick]

  *) mod_cgi: Write all of the request body to the child, not just what
     the kernel would accept on the first write.  [Jeff Trawick]

  *) Back out the change that moved the brigade from the core_output_filters
     ctx to the conn_rec.  Since all requests over a given connection
     go through the same core_output_filter, the ctx pointer has the
     correct lifetime.
     [Ryan Bloom]

  *) Fix another bug in the send_the_file() read/write loop. A partial
     send by apr_send would cause unsent data in the read buffer to
     get clobbered. Complete making send_the_file handle partial
     writes to the network.
     [Bill Stoddard]

  *) Fix a couple of type fixes to allow compilation on AIX again
     [Victor J. Orlikowski <v.j.orlikowski@gte.net>]

  *) Fix bug in send_the_file() which causes offset to be ignored
     if there are no headers to send.
     [Bill Stoddard]

  *) Handle APR_ENOTIMPL returned from apr_sendfile in the core
     filter. Useful for supporting Windows 9* with a binary
     compiled on Windows NT.
     [Bill Stoddard]

Changes with Apache 2.0a7

  *) Reimplement core_output_filter to buffer/save bucket brigades
     across multiple calls to the core_filter. The brigade will be
     sent when either MIN_BYTES_TO_SEND or MAX_IOVEC_TO_WRITE
     thresholds are hit or the EOS bucket is received.
     [Bill Stoddard]

  *) Create experimental filter (buffer_filter) that coalesces bytes 
     into one large buffer before invoking the next filter in the
     chain. This filter is particularly useful with the current 
     implementation of mod_autoindex when it inserted above the
     chunk_filter. mod_autoindex generates a lot of brigades that
     containing buckets holding just a few bytes each. The
     buffer_filter coalesces these buckets into a single large bucket.
     [Bill Stoddard]

  *) Add apr_sendfile() support into the core_output_filter.
     [Bill Stoddard]

  *) Add apr_sendv() support into the core_output_filter.
     [Bill Stoddard]

  *) Fix mod_log_config so that it compiles cleanly with BUFFERED_LOGS
     [Mike Abbott <mja@sgi.com>]

  *) Remove ap_send_fb.  This is no longer used in Apache, and it doesn't
     make much sense, because Apache uses buckets instead of BUFFs now.
     [Ryan Bloom]

  *) send_the_file now falls back to a read/write loop on platforms that
     do not have sendfile.
     [Ryan Bloom and Brian Havard]

  *) Install apachectl correctly, and substitute the proper values so
     that it works again.  [Ryan Bloom]

  *) Better(??) handle platforms that lack sendfile().
     [Jim Jagielski]

  *) APR now has UUID generation/formatting/parsing support.
     [Greg Stein]

  *) Begin the http_filter.  This is an input filter that understands
     the absolute basic amount required to parse an HTTP Request.  The
     goal is to be able to split headers from request body before passing
     the data back to the other filters.
     [Ryan Bloom]

  *) Bring forward from 1.3.13 the config directory implementation
     [Jim Jagielski]

  *) install apxs if it is created
     [Ryan Bloom]

  *) Added APR_IS_STATUS_condition test macros to eliminate canonical error
     conversions.  [William Rowe]

  *) Now that we have ap_add_input_filter(), rename ap_add_filter() to 
     ap_add_output_filter().  [Jeff Trawick]

  *) Multiple build and configuration fixes
    Build process:

      -add datadir and localstatedir substitutions
      -fix layout name
      -fix logfilename misspelling
      -fix evaluation of installation dir variables and
      -replace $foobar by $(foobar) to be usefull in the makefile
    
    Cross compile:
    
      -add rules for cross-compiling in rules.mk. Okay, rule to check for
       $CC_FOR_BUILD is still missing
      -use CHECK_TOOL instead of CHECK_PROG for ranlib
      -add missing "AR=@AR@" to severaly Makefile.in's
      -cache result for "struct rlimit"
      -compile all helper programs with native and cross compiler
       and use the native version to generate header file
     ["Rüdiger" Kuhlmann <Tadu@gmx.de>]

  *) Prepare our autoconf setup for autoconf 2.14a and for cross-
     compiling.
     ["Rüdiger" Kuhlmann <Tadu@gmx.de>]

  *) Fix a bug where a client which only sends \n to delimit header
     lines (netcat) gets a strange looking HTTP_NOT_IMPLEMENTED 
     message.  Start working on ebcdic co-existance with input 
     filtering.
     [William Rowe, Greg Ames]

  *) If mod_so is enabled in the server always create libexec, even
     if there are no modules installed in this directory.  This is a
     requirement for APXS to work correctly.
     [Ryan Bloom]

  *) Connection oriented output filters are now stored in the 
     conn_rec instead of the request_rec.  This allows us to add the
     output filter in the pre-connection phase instead of the
     post_read_request phase, which keeps us from trying to write an
     error page before we have a filter to write to the network.
     [Ryan Bloom, Jeff Trawick, and Greg Ames]

  *) Cleaning up an mmap bucket no longer deletes the mmap.  An
     mmap can be used across multiple buckets (default_handler with
     byte ranges, mod_file_cache, mod_mmap_static), so cleanup of
     the mmap itself can't be associated with the bucket.
     [Jeff Trawick]

  *) Add .dll caching directive ISAPICacheFile to mod_isapi.
     [William Rowe]

  *) Radical surgery to improve mod_isapi support under Win32.
     Includes a number of newer ServerSupportFunction calls, support
     for ReadClient (in order to retrieve POSTs greater than 48KB),
     and general bug fixes to more reliably load ISAPI .dll's and
     prevent leaking handle resources.  Note: There are still 
     discrepancies between IIS's and Apache's ServerVariables, and
     async calls are still not supported.  Additional warnings are
     logged to facilitate debugging of unsupported ISAPI calls.
     [William Rowe]

  *) Add input filtering to Apache.  The basic idea for the input
     filters is the same as the ideas for output filters.  The biggest
     difference is that instead of calling ap_pass_brigade, ap_get_brigade
     should be called, and the order of execution for the filter itself is
     different.  When writing an output filter, a brigade is passed in,
     and filters operate directly on that brigade, when done, they call
     ap_pass_brigade.  Input filters are the exact opposite.  Because input
     is not a push operation, filters first call ap_get_brigade.  When this
     function returns, the input filter will be left with a valid brigade.
     The input filter should then operate on the brigade, and return.
     [Ryan Bloom]

  *) Fix building on BSD/OS using its native make. The build system
     falls back to the BSD .include directive on that host platform.
     [Sascha Schumann]

  *) Expand dbmmanage to allow -d -m -s -p options for Crypt, MD5,
     SHA1 and plaintext password encodings.  Make feature tests a
     bit more flexible.  [William Rowe]

  *) Charset translation: mod_charset_lite handles output content 
     translation in a filter.  mod_charset_lite no longer ignores 
     subrequests.  A bunch of cruft related to BUFF's support for
     translating request and response bodies was removed.  
     [Jeff Trawick]

  *) Move the addition of the CORE filter to the post_read_request
     hook in http_core.c.  This removes the need to add the filter in
     multiple places and allows for an SSL module to be added much
     simpler. [Ryan Bloom]

  *) Fix a security problem that affects certain configurations of
     mod_rewrite. If the result of a RewriteRule is a filename that
     contains expansion specifiers, especially regexp backreferences
     $0..$9 and %0..%9, then it may be possible for an attacker to
     access any file on the web server. [Tony Finch]

  *) Fix a bug where errors that are detected during early request parsing
     don't produce visible HTTP error messages at the browser, because
     the core_filter wasn't present.  [Greg Ames]

  *) Provide apr_socklen_t as a portability aid. 
     [Victor  J. Orlikowski]

  *) Overhaul of dbmmanage to allow a groups arg (as in Apache 1.2)
     as well as a comment arg to the add, adduser and update cmds.
     update allows the user to clear or preserve pw/groups/comment.
     Fixed a bug in dbmmanage that prevented the check option from 
     parsing a password followed by :group... text.  Corrected the
     seed calcualation for Win32 systems, and added -lsdbm support.
     [William Rowe]

  *) Configured mod_auth_dbm to compile with sdbmlib under Win32.
     [William Rowe]

  *) Avoid a segfault when parsing .htaccess files.  An 
     uninitialized tree pointer was passed to ap_build_config().
     [Jeff Trawick]

  *) Change the way that inet_addr & inet_network are checked for
     in APR's configure process to allow BeOS BONE to correctly
     find them. With this change BeOS BONE now builds from source
     with no problems.  [David Reid]

  *) Fix a bug in apr_create_process() for Unix.  The NULL signifying
     the end of the parameters to execve() was stored in the wrong
     location, overlaying the storage beyond the newargs[] array and 
     also passing uninitialized storage to execve(), which would 
     sometimes fail with EFAULT.  [Jeff Trawick]

  *) Fix a bug parsing configuration file containers.  With a sequence
     like this in the config file

       <IfModule mod_kilroy.c>
       any stuff
       </IfModule>
       <IfModule mod_lovejoy.c>
       (blank line)
       any stuff
       </IfModule>

     the second container would be terminated at the blank line due to
     sediment in the buffer from reading the prior </IfModule> and an 
     error message would be generated for the real </IfModule> for the
     second container.  Also due to this problem, any two characters 
     could be used for "</" in the close of a container.  
     [Jeff Trawick]

  *) ap_add_filter prototype changed to remove the ctx pointer.  The
     pointer still remains in the filter structure, but it can not be
     a part of the ap_add_filter prototype.  The reason is that when
     the core uses AddFilter to add a filter to the stack it doesn't
     know how to allocate the ctx pointer, or even how much memory should
     be allocated.  The filters will have to be responsible for allocating
     the ctx memory when they need it.
     [Ryan Bloom]