Newer
Older
created, and at every restart request.
*) Changed AP_MPMQ_MAX_DAEMONS to refer to MaxClients and
added an AP_MPMQ_MAX_DAEMON_USED to refer to the highest
daemon index actually used in the scoreboard. I also
updated the pertinent calls. [Paul J. Reder]
*) Win32: Prevent listening sockets from being inherited by
the Apache child process, CGI scripts, rotatelog process
etc. If the Apache child process segfaults, any processes
that the child started are not reaped. Prior to this fix,
these processes inherited the listening sockets which sometimes
prevented the restarted Apache child process from accepting
connections (ie, the server would hang).
[Bill Stoddard]
*) Provide vhost and request strings when ExtendedStatus is on.
[Greg Ames]
*) Fix some issues with the pod and prefork: check the pod *after*
processing a connection so that a server processing a time-
consuming request bails out as soon as practical; when the
parent process wakes up a server process via connect(), use an
APR timeout on the connect() so that we don't hang for a long
time if there aren't server processes around to do accept().
[Jeff Trawick, Greg Ames]
*) Performance improvement to mod_mime.c. find_ct() in mod_mime,
spends a lot of time in apr_table_get calls. Using the default
httpd.conf, the tables for languages and charsets are somewhat
large, so the time spent scanning them on each request is
significant. Replacing the tables with hash tables provides
*) Add two functions to allow modules to access random parts of the
scoreboard. This allows modules compiled for one MPM to access the
scoreboard, even if it the server was compiled for another MPM.
*) Fix problem in content-length filter where the filter would
buffer all the output from a CGI before sending any bytes
down the filter stack to the network. This problem would cause
significant memory consumption if the CGIs generated
lots of bytes. [Bill Stoddard]
*) Get non-blocking CGI pipe reads working with the bucket brigades.
[Bill Stoddard]
*) Fix seg fault on Windows when serving files cached with mod_file_cache.
[Bill Stoddard]
*) Fix a bug in the threaded MPM that would cause it to kill off all
workers immediately after starting if the number of workers started
was above a certain threshold. [Ryan Bloom, Bill Stoddard]
*) Fix problem with threaded MPM. The problem was that if each child
process was busy serving a single long-lived request and the server
was sent a graceful restart signal, the server would stop serving
requests. This would happen because each child process would wait to
die until the last thread was done, and the parent wouldn't spawn any
new children until a process died. Now, the parent looks at the fact
that the children are dying gracefully, and starts new children.
Those new children only start enough threads to compliment the number
of threads in the other child process that shares the same spot in
the scoreboard. In this way, we make sure to never go over
MaxClients. [Ryan Bloom]
*) modified mod_negotiation and mod_autoindex to speed up by almost a
factor of two on apr_dir_read()-enhanced platforms, such as Win32
and OS2, by calling ap_sub_request_lookup_dirent() with the results
already provided by apr_dir_read(). [William Rowe]
*) mod_file_cache is now more robust to filtering and serves requests
slightly more efficiently. [Cliff Woolley]
*) Fix problem handling FLUSH bucket in the chunked encoding filter.
Module was calling ap_rwrite() followed by ap_rflush() but the
served content was not being displayed in the browser. Inspection
of the output stream revealed that the first data chunk was
missing the trailing CRLF required by the RFC. [Bill Stoddard]
*) apxs no longer generates ap_send_http_header() in the example handler
*) Fix an ab problem which could cause a divide-by-zero exception
with certain invocations (e.g., ab -k -c 6 -n 100 localhost/).
*) Solve case-insensitive platforms' confusion about negotiated
filenames, allowing files of differnt case to match in choosing
the document to serve. [William Rowe]
*) Fix brokenness when ThreadsPerChild is higher than the built-in
limit. We left ap_threads_per_child at the higher value which
led to segfaults when doing certain scoreboard operations.
[Jeff Trawick]
*) Fix seg faults and/or missing output from mod_include. The
default_handler was using the subrequest pool for files and
MMAPs, even though the associated APR structures typically
live longer than the subrequest. [Greg Ames]
*) Extend mod_setenvif to support specifying regular expressions
on the SetEnvIf (and SetEnvIfNoCase) directive attribute field.
Example: SetEnvIf ^TS* [a-z].* HAVE_TS
will cause HAVE_TS to be set if any of the request headers begins
with "TS" and has a value that begins with any character in the
set [a-z]. [Bill Stoddard]
*) httpd children now re-bind themselves to a random CPU on
multiprocessor systems on AIX via bindprocessor() in 2.0.
[Victor J. Orlikowski]
*) Fix htdigest. It would go into a loop in getline when adding
a second user. [Bill Stoddard]
*) Win32 platforms now fully support mod_userdir options. [Will Rowe]
*) Automatically generate httpd.exp for AIX.
*) Add a new request hook, error_log. This phase allows modules
to act on the error log string _after_ it has been written
to the error log. The goal for this hook is to allow monitoring
modules to send the error string to the monitoring agent.
[Ryan Bloom]
*) Modify mod_echo to make it use filters for input and output.
6136
6137
6138
6139
6140
6141
6142
6143
6144
6145
6146
6147
6148
6149
6150
6151
6152
6153
6154
6155
6156
6157
6158
6159
6160
6161
6162
6163
*) Extend mod_headers to support conditional driven Header
add, append and set. Use SetEnvIf to set an envar and conditionally
add/append/set headers based on this envar thusly:
SetEnvIf TSMyHeader value HAVE_TSMyHeader
Header add MyHeader "%t %D" env=HAVE_TSMyHeader
If the request contains header "TSMyHeader: value" then header
MyHeader: "t=xxxxxxxxxx D=yyyy" will be sent on the response.
[Bill Stoddard]
*) Extend mod_headers to support using format specifiers on Header
add, append and set header values. Two format specifiers are supported:
%t - reports, in UTC microseconds since the epoch, when the
request was received.
%D - reports the time, in microseconds, between when the request was
received and the response sent.
Examples:
Header add MyHeader "This request served in %D microseconds. %t"
results in a header being added to the response that looks like this:
MyHeader: This request served in D=5438 microseconds. t=991424704447256
[Bill Stoddard]
*) Fix reset_filter(). We need to be careful how we remove filters.
If we set r->output_filters to NULL, we also have to reset the
connection's filters. [John Sterling]
*) Optimise reset_filter() in http_protocol.c. [Greg Stein]
*) Add a check to ap_die() to make sure the filter stack is sane and
contains the correct basic filters when an error occurs. This fixes
a problem where headers are not being sent on error. [John Sterling]
*) New Header directive 'echo' option. "Header echo regex" will
cause any headers received on the request that match regex to be
echoed to (included in) the response headers.
[Bill Stoddard]
*) include/ap_compat.h tested and set APR_COMPAT_H instead of AP_COMPAT_H.
This prevented the inclusion of apr_compat.h. PR #7773
*) Moved util_uri to the apr-util library. This required a bunch of
apr_name changes for the uri utility functions. [Justin Erenkrantz]
*) Move the addition of default AP_HTTP_HTTP_HEADER filters to the
insert_filter phase so that other filters are not bypassed by default.
[Graham Leggett]
*) Reimplement mod_headers as an output filter. mod_headers can now
add custom headers to inbound requests using the RequestHeader directive
and to responses using the same old Header directive. [Graham Leggett]
Changes with Apache 2.0.18
*) Fix command-line processing so that if a bad argument is specified
Apache will exit. [Jeff Trawick]
*) Change the make targets and rules to be consistent in all of the
Apache-owned source trees. [Roy Fielding]
*) Fix processing of the TRACE method. Previously we passed bogus
parms to form_header_field() and it overlaid some vhost structures,
resulting in a segfault in check_hostalias().
[Greg Ames, Jeff Trawick]
*) Win32: Add support for reliable piped logs. If the logging process
goes down, Apache will automatically restart it. This function has
been part of Apache on Unix/Linux/BSD since the early v1.3 releases.
[Bill Stoddard]
*) Do not start piped log processes during the config file
preflight. This change also circumvents a problem on
Windows where the rotatelog processes created during preflight
was not getting cleaned up properly.
[Bill Stoddard]
*) add "Request Phase Participation" info to mod_info
[Doug MacEachern]
*) Make first phase changes to the scoreboard data structures in
preparation for the rewriting of the scoreboard per my posted
design notes. [Paul J. Reder]
*) Fix httpd's definition of LTFLAGS to be consistent with that of apr
and apr-util, allow it to be overridden by the configure command-line
(default="--silent") and introduce LT_LDFLAGS to replace what we were
formerly abusing as LTFLAGS. [Roy Fielding]
*) Clean up the reporting of incorrect closing container tags.
*) Simplify the configure process by moving all libtool stuff to APR
and moving hints.m4 inline. [Roy Fielding]
*) Add the AP_DECLARE()/AP_CORE_DECLARE macros on the return types
of functions used by mod_proxy for export in the DLL
*) Prevent a hang when a cgi handled by mod_cgid tries to read a
request body from its stdin but no reqest body is being written to
the cgi. [Jeff Trawick]
*) mod_log_config: %c connection status incorrectly logged
as "-" (non-keepalive) when MaxKeepAliveRequests is set to 0.
[Bill Stoddard]
*) Get mod_cern_meta working under Windows
[Bill Stoddard]
*) Create Files, and thus MMAPs, out of the request pool, not the
connection pool. This solves a small resource leak that had us
not closing files until a connection was closed. In order to do
this, at the end of the core_output_filter, we loop through the
brigade and convert any data we have into a single HEAP bucket
that we know will survive clearing the request_rec.
Cliff Woolley]
*) Completely revamp configure so that it preserves the standard make
variables CPPFLAGS, CFLAGS, CXXFLAGS, LDFLAGS and LIBS by moving
the configure additions to EXTRA_* variables. Also, allow the user
to specify NOTEST_* values for all of the above, which eliminates the
need for THREAD_CPPFLAGS, THREAD_CFLAGS, and OPTIM. Fix the setting
of INCLUDES and EXTRA_INCLUDES. Check flags as they are added to
avoid pointless duplications. Fix the order in which flags are given
on the compile and link lines. Remove obsolete macros APR_DOEXTRA,
AC_ADD_LIBRARY, AC_CHECK_DEFINE, APACHE_PASSTHRU, and APACHE_ONCE.
Added APR_SAVE_THE_ENVIRONMENT and APR_RESTORE_THE_ENVIRONMENT macros.
Renamed AC_TYPE_RLIM_T macro to APACHE_TYPE_RLIM_T. [Roy Fielding]
*) Get mod_tls to compile/work better on Windows. PR #7612
*) Fix shutdown/restart hangs in the threaded MPM.
[Jeff Trawick, Greg Ames, Ryan Bloom]
*) Removed the keptalive boolean from conn_rec because it is now only
used by a single routine and can be replaced by a local variable.
[Greg Stein, Ryan Bloom, Roy Fielding]
*) Patch prefork to put enough of the signal processing back in so that
signals are all handled properly now. The previous patch fixed the
deadlock race condition, but broke the user directed signal handling.
This fixes it to work the way it did before my previous prefork patch
(primarily, SIGTERM is now working).
*) Change how input filters decide how much data is returned to the
higher filter. We used to use a field in the conn_rec, with this
change, we use an argument to ap_get_brigade to determine how much
data is retrieved. [Ryan Bloom]
*) Fix seg fault at start-up introduced by Ryan's change to enable
modules to specify their own logging tags. mod_log_config
registers an optional function, ap_register_log_handler().
ap_register_log_handler() was being called by http_core before
the directive hash table was created. This patch creates the
directive hash table before ap_register_log_handler() is
registered as an optional function.
*) Under certain circumstances, Apache did not supply the
right response headers when requiring authentication.
(This is a port of the change that went into Apache 1.3.19.)
*) Allow modules to specify their own logging tags. This basically
allows a module to tell mod_log_config that when %x is encountered
a specific function should be called. Currently, x can be any single
character. It may be more useful to make this a string at some point.
[Ryan Bloom]
Changes with Apache 2.0.17
*) If a higher-level filter handles the byterange aspects of a
request, then the byterange filter should not try to redo the
work. The most common case of this happening, is a byterange
request going through the proxy, and the origin server handles
the byterange request. The proxy should ignore it.
*) Changed the threaded mpm to have child_main join to each of the
worker threads to make sure the kids are all gone before child_main
exits after a signal (cleanup from perform_idle_server_maintenance).
This is an extension of Ryans recent commit to make the child_main
the signal thread.
*) Add more options to the ap_mpm_query function. This also allows MPMs to
report if their threads are dynamic or static. Finally, this also
implements a new API, ap_show_mpm, which returns the MPM that was
*) Do not install the binaries from the support directory twice.
*) The ap_f* functions should flush data to the filter that is passed
*) Make ab work again by changing its native types to apr types and formats.
*) Move the byterange filter and all of the supporting functions back
to the HTTP module. The byterange filter turned out to be very
HTTP specific, and it belongs in the HTTP module. [Greg Stein]
*) Make clean, distclean, and extraclean consistently according to the
Gnu makefile guidelines. [Justin Erenkrantz <jerenkrantz ebuilt.com>]
*) Fix errors in the renaming of the apr_threadattr_detach_xxx functions.
This may have been causing problems stopping processes in the threaded
mpm's. [Greg Ames]
*) Fix content-length in mod_negotiation to a long int representation.
[William Rowe]
*) Remove BindAddress from the default config file.
*) Allow module authors to add a module to their Apache build using
--with-module, without re-running buildconf. The syntax is:
--with-module=module_type:/path/to/module.c
The configure script will copy the module.c file to
modules/module_type, and it will be added to the relevant Makefiles.
currently, this only works for static modules. [Ryan Bloom]
*) Changes required to make prefork clean up idle children properly.
There was a window during which a starting worker deadlocks when
an idle cleanup arrives before it completes init. Apache then keeps
trying to cleanup the same deadlocked worker forever (until higher
pids come along, but it still will never reduce below the deadlocked
pid). Thus the number of children would not reduce to the correct
idle level. [Paul J. Reder]
*) Change the default installation directory to /usr/local/apache2,
as now defined by the "Apache" layout in config.layout. [Marc Slemko]
*) OS/2: Added support for building loadable modules as OS/2 DLLs.
[Brian Havard]
*) Get MaxRequestsPerChild working with the Windows MPM.
[Bill Stoddard]
*) Make generic hooks to work, with mod_generic_hook_import/export
experimental modules. [Ben Laurie, Will Rowe]
*) Fix segfaults for configuration file syntax errors such as
"<Directory>" followed by "</Directory" and
"<Directory>" followed by "</Directoryz>". [Jeff Trawick]
*) Cleanup the --enable-layout option of configure. This makes
us use a consistent location for the config.layout file, and it
makes configure more portable.
*) Changes to 'ab'; fixed int overrun's, added statistics, output in
csv/gnuplot format, rudimentary ssl support and various other tweaks
to make results more true to what is measured. The upshot of this it
turns out that 'ab' has often underreported the true performance of
apache. Often by a order of magnitude :-) See talk/paper of Sander
Dirk-Willem van Gulik
committed
Temme at April ApacheCon 2001 for details.
[Dirk-Willem van Gulik]
*) Clean up mod_cgid's temporary request pool. Besides fixing a
storage leak this ensures that some unnecessary pipes are closed.
[Jeff Trawick]
*) Performance: Add quick_handler hook. This hook is called at the
very beginning of the request processing before location_walk,
translate_name, etc. This hook is useful for URI keyed content
caches like Mike Abbott's Quick Shortcut Cache.
[Bill Stoddard]
*) top_module global variable renamed to ap_top_module [Perl]
*) Move ap_set_last_modified to the core. This is a potentially
controversial change, because this is kind of HTTP specific. However
many protocols should be able to take advantage of this kind of
information. I expect that headers will need one more layer of
indirection for multi-protocol work, but this is a small step in
the right direction. [Ryan Bloom]
*) Enable mod_status by default. This matches what Apache 1.3 does.
[Ed Korthof]
*) Add a ScriptSock directive to the default config file. This is
only enabled when mod_cgid is used.
*) Untangled the buildconf script and eliminated the need for build's
aclocal.m4, generated_lists, build.mk, build2.mk, and a host of other
libtool muck that is now under srclib/apr/build. [Roy Fielding]
*) Win32: Don't accept more connections than we have worker threads
to handle.
[Bill Stoddard]
Bill Stoddard
committed
*) Fix bug in the Unix threaded.c MPM that allowed child processes
to fork() new child processes.
[Bill Stoddard]
*) SECURITY: Fix a major security problem with double-reverse lookup
checking. Previously, a client connecting over IPv4 would not be
matched properly when the server had an IPv6 listening socket.
*) Change the way the beos MPM handles polling to allow it to stop and
restart. Problem was the sockets being polled were being reset by
the select call, so once it had accepted a connection it was no
longer listening on the UDP socket we use for shutdown instructions.
APR needs to be altered, patch on it's way. [David Reid]
*) Empty out the brigade shared by ap_getline()/ap_get_client_block()
on error exit from ap_getline(). Some other code got upset because
the wrong data was in the brigade. [Greg Ames, Jeff Trawick]
*) Handle ap_discard_request_body() being called more than once.
[Greg Ames, Jeff Trawick]
*) Get rid of an inadvertent close of file descriptor 2 in
mod_mime_magic. [Greg Ames, Jeff Trawick]
*) Add a hook, create_request. This hook allows modules to modify
a request while it is being created. This hook is called for all
request_rec's, main request, sub request, and internal redirect.
When this hook is called, the r->main, r->prev, r->next
pointers have been set, so modules can determine what kind of
request this is. [Ryan Bloom]
*) Cleanup the build process a bit more. The Apache configure
script no longer creates its own helper scripts, it just
uses APR's.
*) Stop the forced downgrade of the connection to HTTP/1.0 for
proxy requests. [Graham Leggett]
*) Avoid using sscanf to determine the HTTP protocol number in
the common case because sscanf is a performance hog. From
Mike Abbot's Accelerating Apache patch number 6.
*) SECURITY: Fix a security exposure in mod_access. Previously when
IPv6 listening sockets were used, allow/deny-from-IPv4-address rules
were not evaluated properly (PR #7407). Also, add the ability to
specify IPv6 address strings with optional prefix length on Allow
and Deny. [Jeff Trawick]
*) Enhance rotatelogs so that a UTC offset can be specified, and
the logfile name can be formatted using strftime(3). (Brought
forward from 1.3.) [Ken Coar]
*) Reimplement the Windows MPM (mpm_winnt.c) to eliminate calling
DuplicateHandle on an IOCompletionPort (a practice which
MS "discourages"). The new model does not rely on associating
the completion port with the listening sockets, thus the
completion port can be completely managed within the child
process. A dedicated thread accepts connections off the network,
then calls PostQueuedCompletionStatus() to wake up worker
threads blocked on the completion port.
[Bill Stoddard]
*) Bring forward the --suexec-umask option which allows the
builder to preset the umask for suexec processes. [Ken Coar]
*) Add a -V flag to suexec, which causes it to display the
compile-time settings with which it was built. (Only
usable by root or the AP_HTTPD_USER username.) [Ken Coar]
*) Mod_include should always unset the content-length if the file is
going to be passed through send_parsed_content. There is no to
determine if the content will change before actually scanning the
entire content. It is far safer to just remove the C-L as long
as we are scanning it. [Ryan Bloom]
*) Make sure Apache sends WWW-Authenticate during a reverse proxy
request and not Proxy-Authenticate.
Changes with Apache 2.0.14
*) Fix content-length computation. We ONLY compute a content-length if
We are not in a 1.1 request and we cannot chunk, and this is a keepalive
or we already have all the data. [Ryan Bloom]
*) Report unbounded containers in the config file. Previously, a typo
in the </container> directive could result in the rest of the config
file being silently ignored, with undesired defaults used.
[Jeff Trawick]
*) Make the old_write filter use the ap_f* functions for the buffering.
[Ryan Bloom]
*) Move more code from the http module into the core server. This
is core code, basically the default handler, the default input
and output filters, and all of the core configuration directives.
All of this code is required in order for the server to work, with or
without HTTP. The server is closer to working without the HTTP
module, although there is still more to do. [Ryan Bloom]
*) Fix a number of SGI compile warnings throughout the server. Fix some
bad parameters to apr_bucket_read(). Fix a bad statement in
ap_method_in_list(). For the mod_rewrite cache use apr_time_t
consistently; we were mixing apr_time_t and time_t in invalid ways
before. In load_file(), call apr_dso_error() instead of
apr_strerror() so that we get a more specific string on some platforms.
PR #6980 [Jeff Trawick]
*) Allow modules to query the MPM about it's execution profile. This
query API can and should be extended in the future, but for now,
max_daemons, and threading or forking is a very good start.
*) Modify mod_include to send blocks of data no larger than 9k.
Without this, mod_include will wait until the whole file is parsed,
or the first tag is found to send any data to the client.
*) Fix mod_info, so that <Directory> and <Location> directives are
not displayed twice when displaying the current configuration.
*) Add config directives to override DEFAULT_ERROR_MSG and
DEFAULT_TIME_FORMAT. This was sent in as PR 6193.
*) Get mod_info building and loading on Win32. [William Rowe]
*) Begin to move protocol independant functions out of mod_http. The goal
is to have only functions that are HTTP specific in the http directory.
[Ryan Bloom]
Changes with Apache 2.0.13
*) Don't assume that there will always be multiple calls to the byterange
filter. It is possible that we will need to do byteranges with only
*) Move the error_bucket definition from the http module to the
core server. Every protocol will need this ability, not just
HTTP. [Ryan Bloom]
Changes with Apache 2.0.12
*) Modify mod_file_cache to save pre-formatted strings for
content-length and last-modified headers for performance.
*) Namespace protect IOBUFSIZ since it is exposed in the API.
*) Use "Basic" authentication instead of "basic" in ab, as the spec
*) Fix a seg fault in mod_userdir.c. We used to use the pw structure
without ever filling it out. This fixes PR 7271.
[Taketo Kabe <kabe sra-tohoku.co.jp> and
Cliff Woolley <cliffwoolley yahoo.com>]
*) Add a couple of GCC attribute tags to printf style functions.
*) Add the correct language tag for interoperation with the Taiwanese
versions of MSIE and Netscape. [Clive Lin <clive CirX.ORG>] PR#7142
*) Migrate the perchild MPM to use the new apr signal child, and
APR thread functions. [Ryan Bloom]
*) Close one copy of the CGI's stdout before creating the new process.
The CGI will still have stdout, because we have already dup'ed it.
This keeps Apache from waiting forever to send the results of a CGI
process that has forked a long-lived child process.
*) Remove the rest of the pthreads functions from the threaded MPM.
This requires the APR support for a signal thread that was just
added. [Ryan Bloom]
*) Make mod_dir use a fixup for sending a redirect to the browser.
Before this, we were using a handler, which doesn't make much
sense, because the handler wasn't generating any data, it would
either return a redirect error code, or DECLINED. This fits the
*) Make the threaded MPM use APR threads instead of pthreads.
[Ryan Bloom]
*) Get mod_tls to the point where it actually appears to work in all cases.
[Ben Laurie]
*) implement --enable-modules and --enable-mods-shared for "all" and
"most". [Greg Stein]
*) Move the threaded MPM to use APR locks instead of pthread locks.
[Ryan Bloom]
*) Rename mpmt_pthread to threaded. This is more in line with the
fact that mpmt_pthread shouldn't be using pthreads directly, and
it is a smaller name that doesn't tie into anything.
[Ryan Bloom]
*) Rename the module structures so that the exported symbol matches
the file name, and it is easier to automate the installation
process (generating LoadModule directives from the module filenames).
[Martin Kraemer]
*) Remove the coalesce filter. With the ap_f* functions, this filter
is no longer needed. [Ryan Bloom]
Changes with Apache 2.0.11
*) Remove the dexter MPM. Perchild is the same basic idea, but it has the
added feature of allowing a uid/gid per child process. If no
uid/gid is specified, then Perchild behaves exactly like dexter.
[Ryan Bloom]
*) Get perchild building again. [Ryan Bloom]
*) Don't disable threads just because we are using the prefork MPM.
If somebody wants to compile without threads, they must now add
--disable-threads to the configure command line. [Ryan Bloom]
*) Begin to move the calls to update_child_status into common code, so
that each individual MPM does not need to update the scoreboard itself.
[Ryan Bloom]
*) Allow mod_tls to compile under Unix boxes where openssl has been
installed to the system include files.
*) Cleanup the mod_tls configure process. This should remove any need
to hand-edit any files. We require OpenSSL 0.9.6 or later, but
configure doesn't check that yet. [Ryan Bloom]
*) Add a very early prototype of SSL support (in mod_tls.c). It is
vital that you read modules/tls/README before attempting to build
it. [Ben Laurie]
*) Fix a potential seg fault on all platforms. David Reid fixed this
on BEOS, but the problem could happen anywhere, so we don't want
*) Add new LogFormat directive, %D, to log time it takes to serve a
request in microseconds. [Bill Stoddard]
*) Change AddInputFilter and AddOutputFilter to SetInputFilter and
SetOutputFilter. This corresponds nicely with the other Set
directives, which operate on containers while the Add* directives
tend to work directly on extensions. [Ryan Bloom]
*) Cleanup the header handling a bit. This uses the apr_brigade_*
functions for the buffering so that we don't need to compute
the length of the headers before we actually create the header
buffer. [Ryan Bloom]
*) Allow filters to buffer data using the ap_f* functions. These have
become macros that resolve directly to apr_brigade_*.
[Ryan Bloom]
*) Get the Unix MPM's to do a graceful restart again. If we are going
to register a cleanup with ap_cleanup_scoreboard, then we have to
kill the cleanup with the same function, and that function can't be
static. [Ryan Bloom]
*) Install all required header files. Without these, it was not
possible to compile some modules outside of the server.
[Ryan Bloom]
*) Fix the AliasMatch directive in Apache 2.0. When we brought a patch
forward from 1.3 to 2.0, we missed a single line, which broke regex
aliases. [Ryan Bloom]
*) We have a poor abstraction in the protocol. This is a temporary
hack to fix the bug, but it will need to be fixed for real. If
we find an error while sending out a custom error response, we back
up to the first non-OK request and send the data. Then, when we send
the EOS from finalize_request_protocol, we go to the last request,
to ensure that we aren't sending an EOS to a request that has already
received one. Because the data is sent on a different request than
the EOS, the error text never gets sent down the filter stack. This
fixes the problem by finding the last request, and sending the data
with that request. [Ryan Bloom]
*) Make the server status page show the correct restart time, and
thus the proper uptime. [Ryan Bloom]
*) Move the CGI creation logic from mod_include to mod_cgi(d). This
should reduce the amount of duplicate code that is required to
create CGI processes.
*) ap_new_connection() closes the socket and returns NULL if a socket
call fails. Usually this is due to a connection which has been
reset. [Jeff Trawick]
*) Move the Apache version information out of httpd.h and into release.h.
This is in preparation for the first tag with the new tag and release
system. [Ryan Bloom]
*) Begin restructuring scoreboard code to enable adding back in
the ability to use IPC other than shared memory.
Get mod_status working on Windows again. [Bill Stoddard]
*) Make mod_status work with 2.0. This will work for prefork,
mpmt_pthread, and dexter. [Ryan Bloom]
*) Really fix mod_rewrite map lookups this time. [Tony Finch]
*) Get the correct IP address if ServerName isn't set and we can't
find a fully-qualified domain name at startup.
*) Make mod_cgid work with SuExec. [Ryan Bloom]
*) Adopt apr user/group name features for mod_rewrite. Eliminates some
'extra' stat's for user/group since they should never occur, and now
resolves the SCRIPT_USER and SCRIPT_GROUP, including on WinNT NTFS
volumes. [William Rowe]
*) Adopt apr features to simplify mod_includes. This changes the
behavior of the USER_NAME variable, unknown uid's are now reported
as USER_NAME="<unknown>" rather than the old user#000 result.
WinNT now resolves USER_NAME on NTFS volumes. [William Rowe]
*) Adopt apr features for simplifing mod_userdir, and accept the new
Win32/OS2 exceptions without hiccuping. [William Rowe]
*) Replace configure --with-optim option by using and saving the
environment variable OPTIM instead. This is needed because configure
options do not support multiple flags separated by spaces.
[Roy Fielding]
*) Fix some byterange handling. If we get a byte range that looks like
"-999999" where that is past the end of the file, we should return
a PARTIAL CONTENT status code, and return the whole file as one big
byterange. This matches the 1.3 handling now. [Ryan Bloom]
*) Make the error bucket a real meta-data bucket. This means that the
bucket length is 0, and a read returns NULL data. If one of these
buckets is passed down after the headers are sent, this data will
just be ignored. [Greg Stein]
*) The prefork MPM wasn't killing child processes correctly if a restart
signal was received while the process was serving a request. The child
process would become the equivalent of a second parent process. If
we break out of the accept loop, then we need to do die after cleaning
up after ourselves. [Ryan Bloom]
*) Change the Prefork MPM to use SIGWINCH instead of SIGUSR1 for graceful
restarts. [Ryan Bloom]
*) Modify the apr_stat/lstat/getfileinfo calls within apache to use
the most optimal APR_FINFO_wanted bits. This spares Win32 from
performing very expensive owner, group and permission lookups
and allows the server to function until these apr_finfo_t fields
are implemented under Win32. [William Rowe]
*) Support for typedsafe optional functions - that is functions exported by
optional modules, which, therefore, may or may not be present, depending
on configuration. See the experimental modules mod_optional_fn_{ex,im}port
for sample code. [Ben Laurie]
*) filters can now report an HTTP error to the server. This is done
by sending a brigade where the first bucket is an error_bucket.
This bucket is a simple bucket that stores an HTTP error and
a string. Currently the string is not used, but it may be needed
to output an error log. The http_header_filter will find this
bucket, and output the error text, and then return
AP_FILTER_ERROR, which informs the server that the error web page
has already been sent. [Ryan Bloom]
*) If we get an error, then we should remove all filters except for
those critical to serving a web page. This fixes a bug, where
error pages were going through the byterange filter, even though
that made no sense. [Ryan Bloom]
*) Relax the syntax checking of Host: headers in order to support
iDNS. PR#6635 [Tony Finch]
*) Cleanup the byterange filter to use the apr_brigade_partition
and apr_bucket_copy functions. This removes a lot of very messy
code, and hopefully makes this filter more stable.
[Ryan Bloom]
*) Remove AddModule and ClearModuleList directives. Both of these
directives were used to ensure that modules could be enabled
in the correct order. That requirement is now gone, because
we use hooks to ensure that modules are in the correct order.
[Ryan Bloom]
*) When SuExec is specified, we need to add it to the list of
targets to be built. If we don't, then any changes to the
configuration won't affect SuExec, unless 'make suexec' is
specifically run. [Ryan Bloom]
*) Cleaned out open_file from mod_file_cache, as apr now accepts
the APR_XTHREAD argument to open a file for consumption by
parallel threads on win32. [William Rowe]
*) Correct a bug in determining when we follow symlinks. The code
expected a stat -1 result, not an apr_status_t positive error.
Also check if the APR_FINFO_USER fields are valid before we
follow the link. [William Rowe]
*) Move initgroupgs, ap_uname2id and ap_gname2id from util.c to
mpm_common.c. These functions are only valid on some platforms,
so they should not be in the main-line code. [Ryan Bloom]
*) Remove ap_chdir_file(). This function is not thread-safe,
and nobody is currently using it. [Ryan Bloom]
*) Do not try to run make depend if there are no .c files in the
current directory, doing so makes `make depend` fail.
[Ryan Bloom]
*) Update highperformance.conf to work with either prefork or
pthreads mpms. [Greg Ames]
*) Stop checking to see if this is a pipelined request if we know
for a fact that it isn't. Basically, if r->connection->keepalive == 0.
This keeps us from making an extra read call when serving a 1.0
request. [Ryan Bloom and Greg Stein]
*) Fix the handling of variable expansion look-ahead in mod_rewrite,
i.e. syntax like %{LA-U:REMOTE_USER}, and also fix the parsing of
more complicated nested RewriteMap lookups. PR#7087 [Tony Finch]
*) Fix the RFC number mentioned when complaining about a missing
*) Fix an endless loop in ab which occurred when ab was posting
and the server dropped the connection unexpectedly.
[Jeff Trawick]
*) Fix a segfault while handling request bodies in ap_http_filter().
This problem has been seen with mod_dav usage as well as with
requests where the body was just being discarded. [Jeff Trawick]
*) Some adjustment on the handling and automatic setting (via
hints.m4) of various compilation flags (eg: CFLAGS). Also,
add the capability to specify flags (NOTEST_CFLAGS and
NOTEST_LDFLAGS) which are used to compile Apache, but
not used during the configuration process. Useful for
flags like "-Werror". [Jim Jagielski]
*) Stop using environment variables to force debug mode or
no detach. We now use the -D command line argument to
specify the correct mode. -DONE_PROCESS and -DNO_DETACH.
*) Change handlers to use hooks. [Ben Laurie]
*) Stop returning copies of filenames from both apr_file_t and
apr_dir_t. We pstrdup the filenames that we store in the
actual structures, so we don't need to pstrdup the strings again.
[Ryan Bloom]
*) mod_cgi: Fix some problems where the wrong error value was being
traced. [Jeff Trawick]
*) EBCDIC: Fix some missing ASCII conversion on some protocol data.
[Jeff Trawick]
*) Add generic hooks. [Ben Laurie]
*) Use a real pool to dup the error log descriptor. [Ryan Bloom]
*) Fix a segfault caused by mod_ext_filter when the external filter
program does not exist. [Jeff Trawick]
*) Fix an output truncation error when on an HTTP >= 1.0 request an
object of size between DEFAULT_BUCKET_SIZE and AP_MIN_BYTES_TO_WRITE
was served through mod_charset_lite (or anything else that would
create a transient bucket in this size range). ap_bucket_make_heap()
silently failed (fixed), transient_setaside() discovered it, but
ap_save_brigade() ignored it (fixed). [Jeff Trawick]
*) Ignore \r\n or \n when using PEEK mode for input filters. The problem
is that some browsers send extra lines at the end of POST requests, and
we don't want to delay sending data back to the user just because the
browser isn't well behaved. [Ryan Bloom]
*) Get SuEXEC working again. We can't send absolute paths to suExec
because it refuses to execute those programs. SuEXEC also wasn't
always recognizing configuration changes made using the autoconf
setup. [Ryan Bloom]
*) Allow the buildconf process to find the config.m4 files in the correct
order. Basically, we can now name config.m4 files as config\d\d.m4,
and we will sort them correctly when inserting them into the build
process. [Ryan Bloom]
*) Get mod_cgid to use apr calls for creating the actual CGI process.
This also allows mod_cgid to use ap_os_create_priviledged_process,
thus allowing for SuExec execution from mod_cgid. Currently, we do
not support everything that standard SuExec supports, but at least
it works minimally now. [Ryan Bloom]
*) Allow SuExec to be configured from the ./configure command line.
[Ryan Bloom]
*) Update some of the docs in README and INSTALL to reflect some of
the changes in Apache 2.0 [Cliff Woolley <cliffwoolley yahoo.com>]
*) If we get EAGAIN returned from the call to apr_sendfile, then we
need to call sendfile again. This gets us serving large files
such as apache_2.0a9.tar.gz on FreeBSD again. [Ryan Bloom]
*) Get the support programs building cleanly again.
*) The Apache/Win32 Apache.exe and dll's now live in bin. The
current directory logic now backs up over bin/ to determine the
server root from the Apache.exe path.
*) Apache/Win32 now follows the standard conventions of mod_foo.so
loadable modules, dynamic libs are all named libfoo.dll, and the
makefile.win populates the include, lib and libexec directories.
*) Apache is now IPv6-capable. On systems where APR supports IPv6,
Apache gets IPv6 listening sockets by default. Additionally, the
Listen, NameVirtualHost, and <VirtualHost> directives support IPv6
numeric address strings (e.g., "Listen [fe80::1]:8080").
[Jeff Trawick]
*) Modify the install directory layout. Modules are now installed in
modules/. Shared libraries should be installed in libraries/, but
we don't have any of those on Unix yet. All install directories
are modifyable at configure time. [Ryan Bloom]
*) Install all header files in the same directory on Unix. [Ryan Bloom]
*) Get the functions in server/linked into the server, regardless of
which modules linked into the server. This uses the same hack
for Apache that we use for APR and apr-util to ensure all of the
necessary functions are linked. As a part of thise, the CHARSET_EBCDIC
was renamed to AP_CHARSET_EBCDIC for namespace protection, and to make
the scripts a bit easier.
[Ryan Bloom]
*) Rework the RFC1413 handling to make it thread-safe, use a timeout
on the query, and remove IPv4 dependencies. [Jeff Trawick]
*) Get all of the auth modules to the point that they will install and
be loadable into the server. Our new build/install mechanism expects
that all modules will have a common name format. The auth modules
didn't use that format, so we didn't install them properly.
[Ryan Bloom]