- May 07, 2018
-
-
Andy Polyakov authored
Linking fails with "unrecognized option '--push-state--no-as-needed'", which is beyond our control. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6185)
-
Andy Polyakov authored
Apparently trusty image has newer clang, there is no need to pull clang-3.9 packages. It's clang-5.0.0, installation is a bit quirky, as it fails to compile for example strcmp(s,"-") without warning, and complains about unreferred -I flags. But it's argued that benefits of exercising newer sanitizer outweights the inconvenience of additional -D__NO_STRING_INLINE and -Wno-unused-command-line-argument. Also pull golang when actually needed. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6185)
-
- May 05, 2018
-
-
Rich Salz authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6183)
-
Todd Short authored
Earlier Apple Xcode compilers, e.g. one targeting Mac OS X 10.7, don't support dependency generation and one still has to use makedepend. It's unclear when it was fixed, but all clang-based Apple compilers seem to support -M options. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6169)
-
Andy Polyakov authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6174)
-
Andy Polyakov authored
config probe doesn't work in cross-compile scenarios or with clang. In addition consolidate -Qunused-arguments handling. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6174)
-
- May 04, 2018
-
-
Richard Levitte authored
When the input length is zero, just return zero early. Otherwise, there's a small chance that memory allocation is engaged, fails and returns -1, which is a bit confusing when nothing should be written. Fixes #4782 #4827 Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/6175)
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6177)
-
- May 03, 2018
-
-
Dr. Matthias St. Pierre authored
Fixes #6121 Thanks to Mingtao Yang for reporting this bug. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6162)
-
Richard Levitte authored
Add more items that could serve as entropy source. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6151)
-
Richard Levitte authored
Stop redefining structures that are already defined in system headers. This also means we can stop setting the pointer size globally, because the system structures will have the correct pointer sizes either way. The only exception is passing the right pointer size to a function. Stop trying to twist things around with rand(), that's the job of the DRBG that we feed. Stop assuming the location of the JPI$_FINALEXC item, look it up instead. Signal an exception if the sys$getjpiw call fails (it means the item list isn't set up right, so works as an assertion, but using VMS methodology). Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6151)
-
Matt Caswell authored
Calculating BN_mod_inverse where n is 1 (or -1) doesn't make sense. We should return an error in that case. Instead we were returning a valid result with value 0. Fixes #6004 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6119)
-
- May 02, 2018
-
-
Matt Caswell authored
Commit 5b748dea added this function which should have taken a const argument. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6154)
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6113)
-
Matt Caswell authored
The max protocol version was only being set on the server side. It should have been done on both the client and the server. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6113)
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6113)
-
Matt Caswell authored
The ciphers field in a session contains the stack of ciphers offered by the client. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6113)
-
Matt Caswell authored
The function SSL_get_shared_ciphers() is supposed to return ciphers shared by the client and the server. However it only ever returned the client ciphers. Fixes #5317 Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6113)
-
FdaSilvaYY authored
No need to buildtest on opensslconf.h Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6149)
-
Andy Polyakov authored
Montgomery multiplication post-conditions in some of code paths were formally non-constant time. Cache access pattern was result-neutral, but a little bit asymmetric, which might have produced a signal [if processor reordered load and stores at run-time]. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6141)
-
FdaSilvaYY authored
... and unify 'bits' declarations and printing format. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6132)
-
Dr. Matthias St. Pierre authored
which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*(). Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6105)
-
Richard Levitte authored
rand_pool_bytes_needed() was constructed in such a way that the smallest acceptable entropy factor was 1 entropy bits per 8 bits of data. At the same time, we have a DRBG_MINMAX_FACTOR that allows weaker source, as small as 1 bit of entropy per 128 bits of data. The conclusion is that rand_pool_bytes_needed() needs to change to support weaker entropy sources. We therefore change the input of entropy per byte to be an entropy factor instead. This entropy factor expresses how many bits of data it takes (on average) to get 1 bit of entropy. Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6150)
-
Matt Caswell authored
Fixes #4237 Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/6143)
-
Pavel Kopyl authored
Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4700)
-
- May 01, 2018
-
-
Benjamin Kaduk authored
Commit d316cdcf introduced some extra checks into the session-cache update procedure, intended to prevent the caching of sessions whose resumption would lead to a handshake failure, since if the server is authenticating the client, there needs to be an application-set "session id context" to match up to the authentication context. While that change is effective for its stated purpose, there was also some collatoral damage introduced along with the fix -- clients that set SSL_VERIFY_PEER are not expected to set an sid_ctx, and so their usage of session caching was erroneously denied. Fix the scope of the original commit by limiting it to only acting when the SSL is a server SSL. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5967)
-
Bernd Edlinger authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6124)
-
Matt Caswell authored
Fixes #5061 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6139)
-
Matt Caswell authored
Specifically this is not supported with an even modulus and BN_FLG_CONSTTIME. Fixes #5082 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6137)
-
Matt Caswell authored
Fixes #5063 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6134)
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6145)
-
- Apr 30, 2018
-
-
Kurt Roeckx authored
Fixes: #6046 Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #6125
-
- Apr 29, 2018
-
-
Andy Polyakov authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6106)
-
Andy Polyakov authored
Rationale for enforcing no-engine is because of disconnect between compile-time config and run-time, which is a per-application sandbox directory which one can't predict in advance. Besides, none of the bundled engines actually give an edge on iOS... Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6106)
-
- Apr 28, 2018
-
-
Bernd Edlinger authored
Fixes: #6120 Reviewed-by: Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6123)
-
- Apr 27, 2018
-
-
Bernd Edlinger authored
Fixes: #6081 Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6089)
-
Matt Caswell authored
Make it clear that you should not attempt to get the version before the first handshake is complete. Fixes #2893 Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6013)
-
Richard Levitte authored
Fixes #6098 Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6104)
-