- Jul 17, 2018
-
-
Matt Caswell authored
If we issue new tickets due to post-handshake authentication there is no reason to remove previous tickets from the cache. The code that did that only removed the last session anyway - so if more than one ticket got issued then those other tickets are still valid. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6722)
-
- Jul 16, 2018
-
-
Kurt Roeckx authored
Reviewed-by:Matt Caswell <matt@openssl.org> GH: #6240
-
Kurt Roeckx authored
The config file can override it. In case of the server, it needs to be set on the ctx or some of the other functions on the ctx might file. Reviewed-by: -
Nicola Tuveri authored
By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder implementation) is used only for (k * Generator) or (k * VariablePoint). ECDSA verification uses (a * Generator + b * VariablePoint): this commit forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification path, while using the default wNAF implementation for any other case. With this commit `ec_scalar_mul_ladder` loses the static attribute, and is added to ec_lcl.h so EC_METHODs can directly use it. While working on a new custom EC_POINTs_mul implementation, I realized that many checks (e.g. all the points being compatible with the given EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the corner case `scalar == NULL && num == 0`) were duplicated again and again in every single implementation (and actually some implementations lacked some of the tests). I thought that it makes way more sense for those checks that are independent from the actual implementation and should always be done, to be moved in the EC_POINTs_mul wrapper: so this commit also includes these changes. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
-
Nicola Tuveri authored
This commit uses the new ladder scaffold to implement a specialized ladder step based on differential addition-and-doubling in mixed Lopez-Dahab projective coordinates, modified to independently blind the operands. The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is auto generated with tooling: - see, e.g., "Guide to ECC" Alg 3.40 for reference about the `ladder_pre` implementation; - see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3 for the differential addition-and-doubling formulas implemented in `ladder_step`; - see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m) without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy for the `ladder_post` implementation to recover the `(x,y)` result in affine coordinates. Co-authored-by:
Billy Brumley <bbrumley@gmail.com> Co-authored-by:
Sohaib ul Hassan <soh.19.hassan@gmail.com> Reviewed-by:
-
Billy Brumley authored
and catch corner cases better and earlier Reviewed-by:
-
Nicola Tuveri authored
for specialized Montgomery ladder implementations PR #6009 and #6070 replaced the default EC point multiplication path for prime and binary curves with a unified Montgomery ladder implementation with various timing attack defenses (for the common paths when a secret scalar is feed to the point multiplication). The newly introduced default implementation directly used EC_POINT_add/dbl in the main loop. The scaffolding introduced by this commit allows EC_METHODs to define a specialized `ladder_step` function to improve performances by taking advantage of efficient formulas for differential addition-and-doubling and different coordinate systems. - `ladder_pre` is executed before the main loop of the ladder: by default it copies the input point P into S, and doubles it into R. Specialized implementations could, e.g., use this hook to transition to different coordinate systems before copying and doubling; - `ladder_step` is the core of the Montgomery ladder loop: by default it computes `S := R+S; R := 2R;`, but specific implementations could, e.g., implement a more efficient formula for differential addition-and-doubling; - `ladder_post` is executed after the Montgomery ladder loop: by default it's a noop, but specialized implementations could, e.g., use this hook to transition back from the coordinate system used for optimizing the differential addition-and-doubling or recover the y coordinate of the result point. This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`, as it better corresponds to what this function does: nothing can be truly said about the constant-timeness of the overall execution of this function, given that the underlying operations are not necessarily constant-time themselves. What this implementation ensures is that the same fixed sequence of operations is executed for each scalar multiplication (for a given EC_GROUP), with no dependency on the value of the input scalar. Co-authored-by:
-
Nicola Tuveri authored
Run `make update ERROR_REBUILD=-rebuild` to remove some stale error codes for SM2 (which is now using its own submodule for error codes, i.e., `SM2_*`). Reviewed-by:
-
- Jul 15, 2018
-
-
Andy Polyakov authored
Move base 2^64 code to own #if section. It was nested in base 2^51 section, which arguably might have been tricky to follow. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Base 2^64 addition/subtraction and final reduction failed to treat partially reduced values correctly. Thanks to Wycheproof Project for vectors and Paul Kehrer for report. Reviewed-by:
-
- Jul 14, 2018
-
-
Andy Polyakov authored
Reviewed-by: -
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
"Computationally constant-time" means that it might still leak information about input's length, but only in cases when input is missing complete BN_ULONG limbs. But even then leak is possible only if attacker can observe memory access pattern with limb granularity. Reviewed-by:
-
- Jul 13, 2018
-
-
Matt Caswell authored
Test that we never negotiate TLSv1.3 using GOST Reviewed-by:
-
Matt Caswell authored
Check that we are either configured for PSK, or that we have a TLSv1.3 capable certificate type. DSA certs can't be used in TLSv1.3 and we don't (currently) allow GOST ones either (owing to the lack of standard sig algs). Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Fixes #6513 Reviewed-by:
-
Alexandre Perrin authored
Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype. CLA: trivial Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6712)
-
- Jul 12, 2018
-
-
Patrick Steuer authored
Reviewed-by:
-
Andy Polyakov authored
Note that exported functions maintain original behaviour, so that external callers won't observe difference. While internally we can now perform Montogomery multiplication on fixed-length vectors, fixed at modulus size. The new functions, bn_to_mont_fixed_top and bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use them even outside bn, e.g. in RSA, DSA, ECDSA... Reviewed-by:
David Benjamin <davidben@google.com> (Merged from https://github.com/openssl/openssl/pull/6662)
-
Andy Polyakov authored
The new flag marks vectors that were not treated with bn_correct_top, in other words such vectors are permitted to be zero padded. For now it's BN_DEBUG-only flag, as initial use case for zero-padded vectors would be controlled Montgomery multiplication/exponentiation, not general purpose. For general purpose use another type might be more appropriate. Advantage of this suggestion is that it's possible to back-port it... bn/bn_div.c: fix memory sanitizer problem. bn/bn_sqr.c: harmonize with BN_mul. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Trouble is that addition is postponing expansion till carry is calculated, and if addition carries, top word can be zero, which triggers assertion in bn_check_top. Reviewed-by:
-
Patrick Steuer authored
Signed-off-by:
Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
-
- Jul 11, 2018
-
-
Richard Levitte authored
To avoid the possibility that someone creates rem.exe, rem.bat or rem.cmd, simply don't use it. In the cases it was used, it was to avoid empty lines, but it turns out that nmake handles those fine, so no harm done. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/6686)
-
Richard Levitte authored
It seems that nmake first tries to run executables on its own, and only pass commands to cmd if that fails. That means it's possible to have nmake run something like 'echo.exe' when the builtin 'echo' command was expected, which might give us unexpected results. To get around this, we create our own echoing script and call it explicitly from the nmake makefile. Fixes #6670 Reviewed-by:
-
- Jul 10, 2018
-
-
Pauli authored
Fix the NULL check lack in a different way that is more compatible with non-NULL branch. Refer #6632 Also mark and pop the error stack instead of clearing all errors when something goes awry in CONF_get_number. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
The reason is that we override Text::Template::append_text_to_output(), and it didn't exist before Text::Template 1.46. Fixes #6641 Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
This enables us to require module versions, and to fall back to a bundled version if the system version is too low. Reviewed-by:
-
Richard Levitte authored
We need to check that __GNUC__ is defined before trying to use it. This demands a slightly different way to define DECLARE_DEPRECATED. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
-
- Jul 09, 2018
-
-
Rich Salz authored
Also fixed a memory leak found by the test. Reviewed-by:
-
Bernd Edlinger authored
[extended tests] Reviewed-by:
-
Andy Polyakov authored
Address even Coverity nit. Reviewed-by:
-
Conrad Meyer authored
The sense of the check for build-time support for most hashes was inverted. CLA: trivial Reviewed-by:
-
