- 18 Sep, 2016 1 commit
-
-
FdaSilvaYY authored
Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1594)
-
- 17 Sep, 2016 3 commits
-
-
Richard Levitte authored
In an earlier attempt to simplify the processing of disabled options, 'no-err' and 'no-async' stopped working properly. 'err' and 'async' are directories under 'crypto/', but they are special insofar that they can't be simply skipped, like all the algorithm directories can, so they need special treatment among the disablable things. Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Richard Levitte authored
While we're at it, correct the fault in windows-makefile.tmpl Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
FdaSilvaYY authored
APP_INFO is currently a field of MEM struct. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1583)
-
- 16 Sep, 2016 5 commits
-
-
Alessandro Ghedini authored
Makes the logic a little bit clearer. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1571)
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
They are now relative paths as well Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
- 15 Sep, 2016 6 commits
-
-
Matt Caswell authored
This reverts commit 77a6be4d . There were some unexpected side effects to this commit, e.g. in SSLv3 a warning alert gets sent "no_certificate" if a client does not send a Certificate during Client Auth. With the above commit this causes the connection to abort, which is incorrect. There may be some other edge cases like this so we need to have a rethink on this. Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
This is needed, because on VMS, select() can only be used on sockets. being able to use select() on all kinds of file descriptors is unique to Unix. So, the solution for VMS is to create a layer that translates input from standard input to socket communication. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
- 14 Sep, 2016 10 commits
-
-
Rich Salz authored
Where -curves, etc., are defined: SSL_CONF_cmd Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Rich Salz authored
Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
Richard Levitte authored
This is an amendment to the september 8 commit titled "VMS: Don't force symbol mixed case when building DSOs" Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
RT#4674 issue 2 Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Rich Salz authored
Resolves GH1515 and GH1509. Reviewed-by:
Matt Caswell <matt@openssl.org>
-
Matt Caswell authored
An OCSP_RESPID in a status request extension has 2 bytes for the length not 1. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
The internal SRP function t_fromb64() converts from base64 to binary. It does not validate that the size of the destination is sufficiently large - that is up to the callers. In some places there was such a check, but not in others. Add an argument to t_fromb64() to provide the size of the destination buffer and validate that we don't write too much data. Also add some sanity checks to the callers where appropriate. With thanks to Shi Lei for reporting this issue. Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
- 13 Sep, 2016 15 commits
-
-
Matt Caswell authored
Don't call WPACKET_sub_memcpy(), WPACKET_sub_allocation_bytes() and WPACKET_start_sub_packet_len() directly. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
Remove extra indentation at the start of an "if". Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
Updated the construction code to use the new function. Also added some convenience macros for WPACKET_sub_memcpy(). Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Also, enlarge test group 20 to include openssl commands that aren't tested otherwise Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
RT#4674 Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
FdaSilvaYY authored
Add comments, document -valid option. Add some const qualifiers. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1560)
-
Rich Salz authored
Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Andy Grundman authored
This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected side effect of the compiler building for 32-bit v8plusa instead of v9. GH#1521 CLA: none; trivial Signed-off-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Viktor Szakats authored
Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1520)
-
Viktor Szakats authored
it appears when using gcc/mingw: ``` apps/s_client.c:815:9: warning: variable 'at_eof' set but not used [-Wunused-but-set-variable] int at_eof = 0; ^~~~~~ ``` Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1512)
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Andy Polyakov authored
Traditionally Configure passed $ENV{PERL} to Makefile. But this resulted in ambiguilty as Configure script could be executed by interpreter different from one executing remaining scripts. Since we separate compile- and run-time interpreters with HASHBANGPERL variable, there is no reason to segment the build procedure. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Matt Caswell authored
A peer continually sending unrecognised warning alerts could mean that we make no progress on a connection. We should abort rather than continuing if we receive an unrecognised warning alert. Thanks to Shi Lei for reporting this issue. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-