Reviewed-by: Matt Caswell <matt@openssl.org>

ssl_cert_inst was removed in 2c382349



Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reported by Hanno Böck <hanno@hboeck.de>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reported by Hanno Böck <hanno@hboeck.de>
PR#3800

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

newsig may be used (freed) uninitialized on a malloc error.

Reviewed-by: Rich Salz <rsalz@openssl.org>

If OpenSSL is configured with no-tlsext then ssl_get_prev_session can read
past the end of the ClientHello message if the session_id length in the
ClientHello is invalid. This should not cause any security issues since the
underlying buffer is 16k in size. It should never be possible to overrun by
that many bytes.

This is probably made redundant by the previous commit - but you can never be
too careful.

With thanks to Qinghao Tang for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The ClientHello processing is insufficiently rigorous in its checks to make
sure that we don't read past the end of the message. This does not have
security implications due to the size of the underlying buffer - but still
needs to be fixed.

With thanks to Qinghao Tang for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ongoing work to skip NULL check before calling free routine.  This gets:
    ecp_nistz256_pre_comp_free nistp224_pre_comp_free nistp256_pre_comp_free
    nistp521_pre_comp_free PKCS7_free PKCS7_RECIP_INFO_free
    PKCS7_SIGNER_INFO_free sk_PKCS7_pop_free PKCS8_PRIV_KEY_INFO_free
    PKCS12_free PKCS12_SAFEBAG_free PKCS12_free sk_PKCS12_SAFEBAG_pop_free
    SSL_CONF_CTX_free SSL_CTX_free SSL_SESSION_free SSL_free ssl_cert_free
    ssl_sess_cert_free

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

It should have freed them when != NULL, not when == NULL.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>

It would set gen->d.dirn to a freed pointer in case X509V3_NAME_from_section
failed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>

Avoid checking for NULL before calling free functions.  This gets
ssl.*free:
    ssl_sess_cert_free ssl_free ssl_excert_free ssl_cert_free
    SSL_free SSL_SRP_CTX_free SSL_SESSION_free SSL_CTX_free
    SSL_CTX_SRP_CTX_free SSL_CONF_CTX_free

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

PR#3790

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.

*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.

Thanks to Julien Kauffmann for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

PR#3789

Reviewed-by: Rich Salz <rsalz@openssl.org>

No need for here documents, just use "yes" or </dev/null.
No need for "|| exit 1" clauses, just use "set -e".

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix commit 30f54ad2

 which used
non-portable syntax for checking exit status.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix a "&" that should have been "!" when processing read_ahead.

RT#3793

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Removed commented-out tests

Standardize on doing
        cmd ... || exit 1
instead of
        cmd ...
        if [ $? != 0] ; then
           exit 1
        fi
where that if statement has ben one, three, or four lines, variously.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Since source reformat, we ended up with some error reason string
definitions that spanned two lines.  That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "Peer haven't sent GOST certificate, required for selected ciphersuite"},

However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "No gost certificate sent by peer"},

Clearly not what we wanted.  This change fixes this problem.

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove CA.sh script and use CA.pl for testing, etc.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Output a consistent "start" marker for each test.
Remove "2>/dev/null" from Makefile command lines.
Add OPENSSL_CONFIG=/dev/null for places where it's needed, in
order to suppress a warning message from the openssl CLI.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this

e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
      [-Wshadow]
    seqnum = BSWAP8(blocks[0].q[0]);
             ^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
                            ^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
    size_t ret = 0;
           ^

Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).

Reviewed-by: Rich Salz <rsalz@openssl.org>

We use GNU statement expressions in crypto/md32_common.h, surrounded
by checks that GNU C is indeed used to compile.  It seems that clang,
at least on Linux, pretends to be GNU C, therefore finds the statement
expressions and then warns about them.

The solution is to have clang be quiet about it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
      declaration [-Wempty-translation-unit]
      ^
1 warning generated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Complete reimplementation of d2i_SSL_SESSION and i2d_SSL_SESSION using
new ASN.1 code and eliminating use of old ASN.1 macros.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Print "supported compression methods" all on one line.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.

[Update even SHA results for latest Cortex-A53.]

Reviewed-by: Richard Levitte <levitte@openssl.org>