- Apr 17, 2018
-
-
Richard Levitte authored
Reviewed-by:Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- Apr 16, 2018
-
-
Dr. Matthias St. Pierre authored
Fixes #5961 This reverts commit 3c5a61dd . The macros OPENSSL_MAKE_VERSION() and OPENSSL_VERSION_AT_LEAST() contain errors and don't work as designed. Apart from that, their introduction should be held back until a decision has been mad about the future versioning scheme. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5968)
-
Bernd Edlinger authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5958)
-
Bernd Edlinger authored
Reviewed-by:
-
Matt Caswell authored
RSA key generation: ensure BN_mod_inverse and BN_mod_exp_mont both get called with BN_FLG_CONSTTIME flag set. Based on an original patch by Billy Brumley CVE-2018-0737 Reviewed-by:
-
- Apr 15, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
- Apr 14, 2018
-
-
Andy Polyakov authored
Original condition was susceptible to race condition... Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
-
Andy Polyakov authored
Bind even test/ssltest_old.c to loopback interface. This allows to avoid unnecessary alerts from Windows and Mac OS X firewalls. Reviewed-by:
-
Matthias Kraft authored
The ongoing discussion about casting or not in PR #5626 had me compiling again with above mentioned flags. Indeed the compiler had to say something about it and I did these changes to silence it again. Reviewed-by:
-
- Apr 13, 2018
-
-
Richard Levitte authored
Reviewed-by:
-
Dr. Matthias St. Pierre authored
Fixes #5849 In pull request #5503 a fallback was added which adds a random nonce of security_strength/2 bits if no nonce callback is provided. This change raised the entropy requirements form 256 to 384 bit, which can cause problems on some platforms (e.g. VMS, see issue #5849). The requirements for the nonce are given in section 8.6.7 of NIST SP 800-90Ar1: A nonce may be required in the construction of a seed during instantiation in order to provide a security cushion to block certain attacks. The nonce shall be either: a) A value with at least (security_strength/2) bits of entropy, or b) A value that is expected to repeat no more often than a (security_strength/2)-bit random string would be expected to repeat. Each nonce shall be unique to the cryptographic module in which instantiation is performed, but need not be secret. When used, the nonce shall be considered to be a critical security parameter. This commit implements a nonce of type b) in order to lower the entropy requirements during instantiation back to 256 bits. The formulation "shall be unique to the cryptographic module" above implies that the nonce needs to be unique among (with high probability) among all DRBG instances in "space" and "time". We try to achieve this goal by creating a nonce of the following form nonce = app-specific-data || high-resolution-utc-timestamp || counter Where || denotes concatenation. The application specific data can be something like the process or group id of the application. A utc timestamp is used because it increases monotonically, provided the system time is synchronized. This approach may not be perfect yet for a FIPS evaluation, but it should be good enough for the moment. This commit also harmonizes the implementation of the get_nonce() and the get_additional_data() callbacks and moves the platform specific parts from rand_lib.c into rand_unix.c, rand_win.c, and rand_vms.c. Reviewed-by: -
Bernd Edlinger authored
Address the concern that commit c53c2fec raised differently. The original direction of the traffic is encoded in bit 0 of the flight number. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
-
Richard Levitte authored
There is a test to check that 'genrsa' doesn't accept absurdly low number of bits. Apart from that, this test is designed to check the working functionality of 'openssl genrsa', so instead of having a hard coded lower limit on the size key, let's figure out what it is. Partially fixes #5751 Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/5754) (cherry picked from commit ec46830f8a4ce62c0c8ee7677b1eb8e53ee16df1)
-
Richard Levitte authored
The scrypt and RSA-PSS documents were a mixture of section 3 and section 7 material. With pre-1.1.1 OpenSSL, this is understandable, since we had a different directory layout. With 1.1.1, we've moved to the typical man-page directory layout, and the documents need to be updated accordingly. Also, the scrypt document contained a description of EVP_PKEY_CTX_set1_pbe_pass(), which is a generic function rather than an scrypt specific function, and therefore should be documented separately. Fixes #5802 Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Historically we used to implement standalone base64 code for SRP. This was replaced by commit 3d3f21aa with the standard base64 processing code. However, the SRP base64 code was designed to be compatible with other SRP libraries (notably libsrp, but also others) that use a variant of standard base64. Specifically a different alphabet is used and no padding '=' characters are used. Instead 0 padding is added to the front of the string. By changing to standard base64 we change the behaviour of the API which may impact interoperability. It also means that SRP verifier files created prior to 1.1.1 would not be readable in 1.1.1 and vice versa. Instead we expand our standard base64 processing with the capability to be able to read and generate the SRP base64 variant. Reviewed-by:
-
Matt Caswell authored
Previously they were using EVP_EncodeBlock/EVP_DecodeBlock. These are low level functions that do not handle padding characters. This was causing the SRP code to fail. One side effect of using EVP_EncodeUpdate is that it inserts newlines which is not what we need in SRP so we add a flag to avoid that. Reviewed-by:
-
Richard Levitte authored
The documentation erroneously stated that one can change the default configuration file name. Fixes #5939 Reviewed-by:
-
Andy Polyakov authored
The failure is "impossible", because we have confirmation that s_server listens, yet Mac OS X fails to connect. This avoids 10 minutes timeout on Travis CI. Reviewed-by:
-
Andy Polyakov authored
On rare occasion 's_server | perl -ne print' can complete before corresponding waitpid, which on Windows can results in -1 return value. This is not an error, don't treat it like one. Collect even return value from s_server. Reviewed-by:
-
- Apr 12, 2018
-
-
Richard Levitte authored
X509_get_default_cert_dir_env() returns the default environment variable to check for certificate directories. X509_get_default_cert_dir() returns the default configured certificate directory. Use these instead of hard coding our own values, and thereby be more integrated with the rest of OpenSSL. Reviewed-by:
-
Richard Levitte authored
Fixes #5902 Reviewed-by:
-
Andy Polyakov authored
Purpose of build_all_generated is to execute all the rules that require perl, so that one can copy the tree to system with compiler but without perl. This commit removes last dependencies on perl. Reviewed-by:
-
Daniel Bevenius authored
This is a minor update which hopefully makes these particular lines read a little easier. Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
-
- Apr 11, 2018
-
-
Andy Polyakov authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Computing the value of the GENERATED variable in the build file templates is somewhat overcomplicated, and because of possible duplication errors, changes are potentially error prone. Looking more closely at how this list is determined, it can be observed that the exact list of files to check is consistently available in all the values found in the %unified_info tables 'depends', 'sources' and 'shared_sources', and all that's needed is to filter those values so only those present as keys in the 'generate' table are left. This computation is also common for all build files, so due to its apparent complexity, we move it to common0.tmpl, with the result left in a global variable (@generated), to be consumed by all build file templates. common0.tmpl is included among the files to process when creating build files, but unlike common.tmpl, it comes first of all. Reviewed-by:
-
Theo Buehler authored
The EVP_MD_CTX_cleanup() function was merged into EVP_MD_CTX_reset() which is called by EVP_MD_CTX_free(). Adjust the documentation to say that the latter should be used to avoid leaking memory. CLA: trivial Reviewed-by:
-
Daniel Bevenius authored
Reviewed-by:
-
Dr. Matthias St. Pierre authored
- added some explaining text to a sentence that lost its context. - removed mention of per-ssl drbg - fix whitespace errors Reviewed-by:
-
Richard Levitte authored
For test recipes that want to use the directory of the data directory or a subdirectory thereof, rather than just individual files. Reviewed-by:
-
- Apr 10, 2018
-
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
- Apr 09, 2018
-
-
Andy Polyakov authored
The warning reads "[cast] may cause misaligned access". Even though this can be application-supplied pointer, misaligned access shouldn't happen, because structure type is "encoded" into data itself, and application would customarily pass correctly aligned pointer. But there is no harm in resolving the warning... Reviewed-by:
-
Andy Polyakov authored
Reviewed-by: -
Kunxian Xia authored
CLA: trivial Reviewed-by:
-
- Apr 08, 2018
-
-
Dr. Matthias St. Pierre authored
Fixes #5778, #5840 The various IS_*() macros did not work correctly for 8-bit ASCII characters with the high bit set, because the CVT(a) preprocessor macro and'ed the given ASCII value with 0x7F, effectively folding the high value range 128-255 over the low value range 0-127. As a consequence, some of the IS_*() erroneously returned TRUE. This commit fixes the issue by adding range checks instead of cutting off high order bits using a mask. In order avoid multiple evaluation of macro arguments, most of the implementation was moved from macros into a static function is_keytype(). Thanks to Румен Петров for reporting and analyzing the UTF-8 parsing issue #5840. Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
