- Jan 14, 2016
-
-
Viktor Dukhovni authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Richard Levitte authored
On Unixly platforms, this doesn't matter. On VMS, it does. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
We required that a target be named 'debug-something' or to have at least one of the configuration items debug_cflags and debug_lflags for --debug to be accepted. However, there are targets with no such markings but that will still have debugging capabilities. This is particularly true for mk1mf builds, where the extra flags for debugging are figured out later on by util/mk1mf.pl. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Rich Salz authored
It turns out that -pause calls the undocumented function SSL_set_debug. That just sets flag inside the SSL structure. That flag, despite the command is never used. So remove the flag, the field, and the function. Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Viktor Dukhovni authored
Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
Tell open() O_BINARY on VMS doesn't make sense, as it's possible to use more precise file attributes. However, if we're still going to fdopen() it in binary mode, we must set the fd in binary context. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
On some platforms, the shell will determine what attributes a file will have, so while the program might think it's safely outputting binary data, it's not always true. For the sake of the tests, it's therefore safer to use -out than to use redirection. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
'openssl rehash' isn't implemented on all platforms, and since 'make test' depends on a rehash of certs/demo being performed, it becomes an effective block from running tests on any platform but Unix, for the moment. It's better to fall back to c_rehash and let the tests perform everywhere. Reviewed-by: Matt Caswell <matt@openssl.org>
-
Rich Salz authored
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
-
Dr. Stephen Henson authored
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
-
Viktor Dukhovni authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
On VMS, the command MCR will assume SYS$SYSTEM: when the first argument lacks a directory spec. So for programs in the current directory, we add [] to tell MCR it is in the current directory. It's the same as having ./ at the start of a program on Unix so the shell doesn't start looking along $PATH. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
- Jan 13, 2016
-
-
Viktor Dukhovni authored
Regenerated expired test certificates, good for the next 100 years. Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
-
Viktor Dukhovni authored
Note, this now compiles, but fails tests, so further remediation is required. Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
-
Rich Salz authored
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
-
Viktor Dukhovni authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
This used to work but somewhere along the line it broke and was failing to detect duplicate ordinals - which was the whole point of the test! Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
util/mk1mf.pl was relying on the platform having the 'debug-' prefix for doing a debug build. Since the setup of targets has changed, this is no longer true. However, it can look for '--debug' in the command line options. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Rich Salz authored
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov. Had to add various exdata calls to init/copy/free the exdata. Had to remove const from some EC functions because exdata isn't const-correct. :( Also remove EC_EXTRA_DATA and use a union to hold the possible pre-computed values and an enum to tell which value is in the union. (Rich Salz) Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
-
Richard Levitte authored
This test relies on a private function, which isn't exported. This test would work better as a unit test in crypto/bn/bn_prime.c. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Dr. Stephen Henson authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
-
Viktor Dukhovni authored
For some strange reason opensslconf.h was only defining DES_LONG when included via des.h, but that's exceedingly fragile (as a result of include guards the include via des.h might not actually process the content again). Ripped out the nesting constraint, now always define OSSL_DES_LONG if not already defined. Note, this could just be DES_LONG, but trying to avoid exposing DES_LONG in places where it has never been seen before, so it is up to des.h to actually define DES_LONG as OSSL_DES_LONG. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Viktor Dukhovni authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
It seems like the convention for VMS exit codes is to combine the VMS C facility code (0x35a000) with a recoded exit code as follows: 0 => 1 1-255 => 8*code + 2 We also add 0x10000000, which is the control bit that has DCL not report the error on the terminal. That's just as well, since it would be quite nonsensical, for example: %C-W-NOMSG, Message number 0035A018 We could do all this by using the normal exit() function after having defined the macro _POSIX_EXIT. Unfortunately, this feature only exists in VMS C V7.1 and up. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
We missed this one because rc5 is disabled by default. Notified by The Doctor <doctor@doctor.nl2k.ab.ca> Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
VMS being a record oriented operating system, it's uncertain how the 'pipe' passes binary data from one process to another. Experience shows that we get in trouble, and it's probably due to the pipe in itself being opened in text mode (variable length records). It's safer to pass data via an intermediary file instead. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
VMS uses a variant of openssl.cnf named openssl-vms.cnf. There's a Perl on VMS mystery where a open pipe will not SIGPIPE when the child process exits, which means that a loop sending "y\n" to it will never stop. Adding a counter helps fix this (set to 10, we know that none of the CA.pl commands will require more). Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Mathias Berchtold authored
Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Stephen Henson <steve@openssl.org>
-
Viktor Dukhovni authored
Well, I'm not actually changing time_t, just changing how time_t valued opt values are converted from string to time_t. Reviewed-by: Rich Salz <rsalz@openssl.org>
-