And also for SSL_CTX_get_tlsext_status_type()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The tlsext_status_type field in SSL is used by e.g. OpenResty to determine
if the client requested the certificate status, but SSL is now opaque.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

GH1180: Local variable sometimes unused
GH1181: Missing close paren.

Thanks to <wipedout@yandex.ru> for reporting these.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Also tweaks to find-doc-nits, including name/synopsis checking.
Ironically, it also reports on duplicated doc names :)

Reviewed-by: Richard Levitte <levitte@openssl.org>

If using threads and OpenSSL is loaded via dlopen(), and subsequently
closed again via dlclose() *before* the threads are destroyed, then
OpenSSL will not free up the per thread resources. We need to document
this restriction, and provide some guidance on what to do about it.

I did some testing and discovered/verified a few of things (at least
this is the behaviour on Linux):

- Using OpenSSL via dlopen in a mutli-threaded app does leak memory if
threads are destroyed after dlcose() is called.
- In a single threaded environment, or if threads are destroyed prior to
dlclose() being called, then no memory is leaked
- Using the RTLD_NODELETE flag to dlopen solves the above problem
- Interestingly the OpenSSL atexit() handler gets called when dlclose()
is called rather than at application exit (I was worred that it might crash
if there was an atexit() handler for a function that has been unloaded)
- RTLD_NODELETE is a non-standard flag - but it does seem to be fairly
widely supported. As far as I could determine (via google), at least Linux,
Solaris, OpenBSD, FreeBSD, HP-UX all seem to support it.

I also tested on Windows (using LoadLibrary instead of dlopen and
FreeLibrary instead of dlclose) and experienced similar behaviour, except
that (AFAIK) there is no equivalent of RTLD_NODELETE on Windows.

GitHub Issue #653

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update script to look for period or POD markup in NAME section, and
fix them.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1175)

If we're going to redirect STDERR and STDOUT, it's better to do it by
the book.  This fix is a straight copy of examples in the perlfunc
manual.

Reviewed-by: Matt Caswell <matt@openssl.org>

The directories for the final products were never registered, it was
plain luck that intermediary files were in the same place and
registered the directory anyway.

Also, scripts are generated directly from source (binaries go through
intermadiary object files), so we need to explicitely make sure to
avoid registering the source directory unless it's an in source
build.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The dsa_ossl.c file defined a couple of multi-line macros, but then only
used each one once. The macros just serve to complicate the code and make
it more difficult to understand what is really going on. Hence they are
removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Operations in the DSA signing algorithm should run in constant time in
order to avoid side channel attacks. A flaw in the OpenSSL DSA
implementation means that a non-constant time codepath is followed for
certain operations. This has been demonstrated through a cache-timing
attack to be sufficient for an attacker to recover the private DSA key.

CVE-2016-2178

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Some of the instructions used in latest additions are extension
ones. There is no real reason to limit ourselves to specific
processors, so [re-]adhere to base instruction set.

RT#4548

Reviewed-by: Rich Salz <rsalz@openssl.org>

In rare cases, the shell we run test programs in may have complaints.
Shut those up unless testing verbosely.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Return directly NULL after ASN1_STRING_set, as it already has set an error code.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Previous build scheme allowed building just the stuff in one
subdirectory, like this:

    make -C crypto/aes

Because the unified only has a top-level Makefile, this is not
possible with it.  This change adds a replacement where each directory
we have something to build in becomes a target in its own right,
allowing building something like this:

    make crypto/aes

The exception is the directory test, because we already have such a
target.

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

GH: #1139

RT#4474 (partial)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Ben Laurie <ben@links.org>

MR: #2740

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove some unused files.
Rename doc-nit-check to be consistent.
Add check for multiple #include in synopsis.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Since one generates files that the other depends on, there's no
real reason to keep them separate.  Since they were both different
aspects of 'openssl req', the merge ends up in 25-test_req.t.

This also makes cleanup easier.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Needed to get size_t on Windows

Reviewed-by: Rich Salz <rsalz@openssl.org>