Template references are words with double brackets, and refer to the
same field in the target pointed at the the double bracketed word.

For example, if a target's configuration has the following entry:

    'cflags' => '-DFOO {{x86_debug}}'

... then {{x86_debug}} will be replaced with the 'cflags' value from
target 'x86_debug'.

Note: template references are resolved recursively, and circular
references are not allowed

Reviewed-by: Andy Polyakov <appro@openssl.org>

The reasoning is that configuration strings are hard to read and error
prone, and that a better way would be for them to be key => value hashes.

Configure is made to be able to handle target configuration values as a
string as well as a hash.  It also does the best it can to combine a
"debug-foo" target with a "foo" target, given that they are similar
except for the cflags and lflags values.  The latter are spliced into
options that are common for "debug-foo" and "foo", options that exist
only with "debug-foo" and options that exist only with "foo", and make
them into combinable attributes that holds common cflags, extra cflags
for debuggin and extra cflags for non-debugging configurations.

The next step is to make it possible to have template configurations.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.

This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.

[0]: 904348a4



PR#3706

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Missed one file in the #ifdef merge; thanks Kurt.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Update error messages to say "EC is disabled" these can then be picked up
by mkdef.pl.

Update ordinals.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Other curves don't have this problem.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.

(For consistency, cast other shifts, too.)

Caught by -fsanitize=shift

Submitted by Nick Lewycky (Google)

Reviewed-by: Andy Polyakov <appro@openssl.org>

Allocate and free ASN.1 string types directly instead of going through
the ASN.1 item code.

Reviewed-by: Rich Salz <rsalz@openssl.org>

According to RFC 5649 section 4.1 step 1) we should not add padding
if plaintext length is multiply of 8 ockets.

This matches pseudo-code in http://dx.doi.org/10.6028/NIST.SP.800-38F


on page 15, section 6.3 KWP, algorithm 5 KWP-AE, step 2.

PR#3675

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove DECLARE_ASN1_SET_OF and DECLARE_PKCS12_STACK_OF these haven't been
used internally in OpenSSL for some time.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>

In the RSA_X931_derive_ex a call to BN_CTX_new is made. This can return
NULL on error. However the return value is not tested until *after* it is
derefed! Also at the top of the function a test is made to ensure that
|rsa| is not NULL. If it is we go to the "err" label. Unfortunately the
error handling code deref's rsa.

Reviewed-by: Rich Salz <rsalz@openssl.org>

If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Fixed assorted missing return value checks in c3_cpols.c

Reviewed-by: Rich Salz <rsalz@openssl.org>

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.

Reviewed-by: Andy Polyakov <appro@openssl.org>

In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.

Reviewed-by: Andy Polyakov <appro@openssl.org>

[and respect error return value in ssltest.c]

Reviewed-by: Matt Caswell <matt@openssl.org>

Suggested by John Foley <foleyj@cisco.com>.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Configure would load the glob "Configurations*".  The problem with
this is that it also loads all kinds of backups of those
configurations that some editors do, like emacs' classic
'Configurations~'.  The solution is to give them an extension, such as
'.conf', and make sure to end the glob with that.

Also, because 'Configurations.conf' makes for a silly name, and
because a possibly large number of configurations will become clutter,
move them to a subdirectory 'Configurations/', and rename them to
something more expressive, as well as something that sets up some form
of sorting order.  Thus:

    Configurations	->	Configurations/10-main.conf
    Configurations.team	->	Configurations/90-team.conf

Finally, make sure that Configure sorts the list of files that 'glob'
produces, and adapt Makefile.org.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Cleanse various intermediate buffers used by the PRF.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure all malloc failures return -1.

Reported by Adam Langley (Google).

Reviewed-by: Matt Caswell <matt@openssl.org>

BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.

Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix security issue where under certain conditions a client can complete a
handshake with an unseeded PRNG. The conditions are:
- Client is on a platform where the PRNG has not been seeded, and the
user has not seeded manually
- A protocol specific client method version has been used (i.e. not
SSL_client_methodv23)
- A ciphersuite is used that does not require additional random data
from the PRNG beyond the initial ClientHello client random
(e.g. PSK-RC4-SHA)

If the handshake succeeds then the client random that has been used will
have been generated from a PRNG with insufficient entropy and therefore
the output may be predictable.

For example using the following command with an unseeded openssl will
succeed on an unpatched platform:

openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA

CVE-2015-0285

Reviewed-by: Richard Levitte <levitte@openssl.org>

Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Since commit 741c9959

 ("DTLS revision."), we put the wrong protocol
version into our ClientHello for DTLS1_BAD_VER. The old DTLS
code which used ssl->version was replaced by the more generic SSL3 code
which uses ssl->client_version. The Cisco ASA no longer likes our
ClientHello.

RT#3711

Reviewed-by: Rich Salz <rsalz@openssl.org>

Commit 9cf0f187 in HEAD, and 68039af3

 in 1.0.2, removed a version check
from dtls1_buffer_message() which was needed to distinguish between DTLS
1.x and Cisco's pre-standard version of DTLS (DTLS1_BAD_VER).

Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3703

Reviewed-by: Tim Hudson <tjh@openssl.org>

New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.

Call ASN1_STRING_clear_free on PKCS#8 private key components.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>