- Nov 12, 2018
-
-
Richard Levitte authored
Just refering to a hash table element as an array reference will automatically create that element. Avoid that by defaulting to a separate empty array reference. Fixes #7543 Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7544) (cherry picked from commit 3bed01a09071fb289484dfd265f0a8a991537282)
-
Matt Caswell authored
Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7442) (cherry picked from commit 24ae00388fb9e25af8f94d36b7c191ae90061586)
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
TLSv1.3 is more restrictive about the curve used. There must be a matching sig alg defined for that curve. Therefore if we are using some other curve in our certificate then we should not negotiate TLSv1.3. Fixes #7435 Reviewed-by:
-
Richard Levitte authored
Setting the SipHash hash size and setting its key is done with two independent functions... and yet, the internals depend on both. Unfortunately, the function to change the size wasn't adapted for the possibility that the key was set first, with a different hash size. This changes the hash setting function to fix the internal values (which is easy, fortunately) according to the hash size. evpmac.txt value for digestsize:8 is also corrected. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7613) (cherry picked from commit 42503613)
-
- Nov 10, 2018
-
-
Tomas Mraz authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Richard Levitte <levitte@openssl.org> GH: #7391 (cherry picked from commit 75b68c9e4e8591a4ebe083cb207aeb121baf549f)
-
Mansour Ahmadi authored
Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7427) (cherry picked from commit d896b79b0994a35ecfd1c8e729d348d67236150e)
-
Billy Brumley authored
Reviewed-by:
-
- Nov 09, 2018
-
-
Bernd Edlinger authored
Fixes #7022 Reviewed-by:
-
Richard Levitte authored
... otherwise, it's taken to be part of a device name. Reviewed-by:
-
Richard Levitte authored
We only had the main 'install' target depend on 'all'. This changes the dependencies so targets like install_dev, install_runtime_libs, install_engines and install_programs depend on build targets that are correspond to them more specifically. This increases the parallel possibilities. Fixes #7466 Reviewed-by:
-
Richard Levitte authored
When trying 'make -j{n} install', you may occasionally run into trouble because to sub-targets (install_dev and install_runtime) try to install the same shared libraries. That makes parallel install difficult. This is solved by dividing install_runtime into two parts, one for libraries and one for programs, and have install_dev depend on install_runtime_libs instead of installing the shared runtime libraries itself. Fixes #7466 Reviewed-by: -
Paul Yang authored
[skip-ci] Reviewed-by:
-
- Nov 08, 2018
-
-
Dr. Matthias St. Pierre authored
Commit c7504aeb (pr #6432) fixed a regression for applications in chroot environments, which compensated the fact that the new OpenSSL CSPRNG (based on the NIST DRBG) now reseeds periodically, which the previous one didn't. Now the reseeding could fail in the chroot environment if the DEVRANDOM devices were not present anymore and no other entropy source (e.g. getrandom()) was available. The solution was to keep the file handles for the DEVRANDOM devices open by default. In fact, the fix did more than this, it opened the DEVRANDOM devices early and unconditionally in rand_pool_init(), which had the unwanted side effect that the devices were opened (and kept open) even in cases when they were not used at all, for example when the getrandom() system call was available. Due to a bug (issue #7419) this even happened when the feature was disabled by the application. This commit removes the unconditional opening of all DEVRANDOM devices. They will now only be opened (and kept open) on first use. In particular, if getrandom() is available, the handles will not be opened unnecessarily. This change does not introduce a regression for applications compiled for libcrypto 1.1.0, because the SSLEAY RNG also seeds on first use. So in the above constellation the CSPRNG will only be properly seeded if it is happens before the forking and chrooting. Fixes #7419 Reviewed-by:
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
Dr. Matthias St. Pierre authored
and remove duplicate rand_drbg_seedlen() implementation again. Reviewed-by:
-
Matt Caswell authored
Previously we indicated this as a malloc failure which isn't very helpful. Reviewed-by:
-
Matt Caswell authored
use_ecc() was always returning 1 because there are default (TLSv1.3) ciphersuites that use ECC - even if those ciphersuites are disabled by other options. Fixes #7471 Reviewed-by:
-
- Nov 07, 2018
-
-
Pauli authored
Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/7587) (cherry picked from commit ac765685)
-
Bernd Edlinger authored
... to make the intended use more clear and differentiate it from the data member "adin_pool". Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- Nov 05, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Pauli authored
Reviewed-by:
-
Pauli authored
Reviewed-by:
-
- Nov 04, 2018
-
-
Benjamin Kaduk authored
Commit 9ef9088c switched the SSL/SSL_CTX statistics counters to using Thread-Sanitizer-friendly primitives. However, it erroneously converted an addition of -1 (for s->session_ctx->stats.sess_accept) to an addition of +1, since that is the only counter API provided by the internal tsan_assist.h header until the previous commit. This means that for each accepted (initial) connection, the session_ctx's counter would get doubly incremented, and the (switched) ctx's counter would also get incremented. Restore the counter decrement so that each accepted connection increments exactly one counter exactly once (in net effect). Reviewed-by:
-
Benjamin Kaduk authored
The existing tsan_counter() API increments a reference counter. Provide a new API, tsan_decr(), to decrement such a reference counter. This can be used, for example, when a reference is added to the session_ctx's sess_accept stats but should more properly be tracked in the regular ctx's statistics. Reviewed-by:
-
- Nov 02, 2018
-
-
Richard Levitte authored
If engine building fails for some reason, we must make sure to close the /dev/crypto handle. Reviewed-by:
-
Richard Levitte authored
We opened /dev/crypto once for each session, which is quite unnecessary. With this change, we open /dev/crypto once at engine init, and close it on unload. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Copying an EVP_MD_CTX, including the implementation local bits, is a necessary operation. In this case, though, it's the same as initializing the local bits to be "copied to". Fixes #7495 Reviewed-by:
-
Richard Levitte authored
The documentation says some commands care, but the code says differently. Reviewed-by:
-
- Nov 01, 2018
-
-
Pauli authored
Reviewed-by:
-
- Oct 31, 2018
-
-
Richard Levitte authored
This makes sure that any resulting directory target in the build files also depend on object files meant for shared libraries. As a side effect, we move the production of the dirinfo structure from common.tmpl to Configure, to make it easier to check the result. Reviewed-by:
-
Andy Polyakov authored
This excluses user from additional PATH adjustments in case NDK has llvm-ar. Reviewed-by:
-
