Newer
Older
Ralf S. Engelschall
committed
Ralf S. Engelschall
committed
_______________
Changes between 0.9.4 and 0.9.5 [xx XXX 1999]
Dr. Stephen Henson
committed
*) Allow certificate extensions to be added to certificate requests. These
are specified in a 'req_extensions' option of the req section of the
config file. They can be printed out with the -text option to req but
are otherwise ignored at present.
[Steve Henson]
Dr. Stephen Henson
committed
*) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first data
read consists of only the final block it would not decrypted because
EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
A misplaced 'break' also meant the decrypted final block might not be
copied until the next read.
[Steve Henson]
Dr. Stephen Henson
committed
*) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
a few extra parameters to the DH structure: these will be useful if
for example we want the value of 'q' or implement X9.42 DH.
[Steve Henson]
*) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
provides hooks that allow the default DSA functions or functions on a
"per key" basis to be replaced. This allows hardware acceleration and
hardware key storage to be handled without major modification to the
library. Also added low level modexp hooks and CRYPTO_EX structure and
associated functions.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
as "read only": it can't be written to and the buffer it points to will
not be freed. Reading from a read only BIO is much more efficient than
a normal memory BIO. This was added because there are several times when
an area of memory needs to be read from a BIO. The previous method was
to create a memory BIO and write the data to it, this results in two
copies of the data and an O(n^2) reading algorithm. There is a new
function BIO_new_mem_buf() which creates a read only memory BIO from
an area of memory. Also modified the PKCS#7 routines to use read only
memory BIOSs.
[Steve Henson]
*) Bugfix: ssl23_get_client_hello did not work properly when called in
state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
but a retry condition occured while trying to read the rest.
[Bodo Moeller]
Dr. Stephen Henson
committed
*) The PKCS7_ENC_CONTENT_new() function was setting the content type as
NID_pkcs7_encrypted by default: this was wrong since this should almost
always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
the encrypted data type: this is a more sensible place to put it and it
allows the PKCS#12 code to be tidied up that duplicated this
functionality.
[Steve Henson]
*) Changed obj_dat.pl script so it takes its input and output files on
the command line. This should avoid shell escape redirection problems
under Win32.
[Steve Henson]
Dr. Stephen Henson
committed
*) Initial support for certificate extension requests, these are included
in things like Xenroll certificate requests. Included functions to allow
extensions to be obtained and added.
Dr. Stephen Henson
committed
[Steve Henson]
*) -crlf option to s_client and s_server for sending newlines as
CRLF (as required by many protocols).
[Bodo Moeller]
[Ralf S. Engelschall]
*) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
[Andrija Antonijevic <TheAntony2@bigfoot.com>]
Dr. Stephen Henson
committed
*) Fix -startdate and -enddate (which was missing) arguments to 'ca'
program.
[Steve Henson]
*) New function DSA_dup_DH, which duplicates DSA parameters/keys as
DH parameters/keys (q is lost during that conversion, but the resulting
DH parameters contain its length).
For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
much faster than DH_generate_parameters (which creates parameters
where p = 2*q + 1), and also the smaller q makes DH computations
much more efficient (160-bit exponentiation instead of 1024-bit
exponentiation); so this provides a convenient way to support DHE
ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
utter importance to use
SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
or
SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
when such DH parameters are used, because otherwise small subgroup
attacks may become possible!
[Bodo Moeller]
*) Avoid memory leak in i2d_DHparams.
[Bodo Moeller]
*) Allow the -k option to be used more than once in the enc program:
this allows the same encrypted message to be read by multiple recipients.
[Steve Henson]
*) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
it will always use the numerical form of the OID, even if it has a short
or long name.
[Steve Henson]
*) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
method only got called if p,q,dmp1,dmq1,iqmp components were present,
otherwise bn_mod_exp was called. In the case of hardware keys for example
no private key components need be present and it might store extra data
in the RSA structure, which cannot be accessed from bn_mod_exp. By setting
RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for private key
operations.
[Steve Henson]
*) Added support for SPARC Linux.
[Andy Polyakov]
*) pem_password_cb function type incompatibly changed from
typedef int pem_password_cb(char *buf, int size, int rwflag);
to
....(char *buf, int size, int rwflag, void *userdata);
so that applications can pass data to their callbacks:
The PEM[_ASN1]_{read,write}... functions and macros now take an
additional void * argument, which is just handed through whenever
the password callback is called.
[Damien Miller <dmiller@ilogic.com.au>, with tiny changes by Bodo Moeller]
New function SSL_CTX_set_default_passwd_cb_userdata.
Compatibility note: As many C implementations push function arguments
onto the stack in reverse order, the new library version is likely to
interoperate with programs that have been compiled with the old
pem_password_cb definition (PEM_whatever takes some data that
happens to be on the stack as its last argument, and the callback
just ignores this garbage); but there is no guarantee whatsoever that
this will work.
*) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
(both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
problems not only on Windows, but also on some Unix platforms.
To avoid problematic command lines, these definitions are now in an
auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
[Bodo Moeller]
*) MIPS III/IV assembler module is reimplemented.
[Andy Polyakov]
*) More DES library cleanups: remove references to srand/rand and
delete an unused file.
[Ulf Möller]
Dr. Stephen Henson
committed
*) Add support for the the free Netwide assembler (NASM) under Win32,
since not many people have MASM (ml) and it can be hard to obtain.
This is currently experimental but it seems to work OK and pass all
the tests. Check out INSTALL.W32 for info.
[Steve Henson]
*) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
without temporary keys kept an extra copy of the server key,
and connections with temporary keys did not free everything in case
of an error.
[Bodo Moeller]
*) New function RSA_check_key and new openssl rsa option -check
for verifying the consistency of RSA keys.
[Ulf Moeller, Bodo Moeller]
*) Various changes to make Win32 compile work:
1. Casts to avoid "loss of data" warnings in p5_crpt2.c
2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
comparison" warnings.
3. Add sk_<TYPE>_sort to DEF file generator and do make update.
Dr. Stephen Henson
committed
[Steve Henson]
*) Add a debugging option to PKCS#5 v2 key generation function: when
you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
derived keys are printed to stderr.
[Steve Henson]
*) Copy the flags in ASN1_STRING_dup().
[Roman E. Pavlov <pre@mo.msk.ru>]
Dr. Stephen Henson
committed
*) The x509 application mishandled signing requests containing DSA
keys when the signing key was also DSA and the parameters didn't match.
It was supposed to omit the parameters when they matched the signing key:
the verifying software was then supposed to automatically use the CA's
parameters if they were absent from the end user certificate.
Omitting parameters is no longer recommended. The test was also
the wrong way round! This was probably due to unusual behaviour in
EVP_cmp_parameters() which returns 1 if the parameters match.
This meant that parameters were omitted when they *didn't* match and
the certificate was useless. Certificates signed with 'ca' didn't have
this bug.
[Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
*) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
The interface is as follows:
Applications can use
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
"off" is now the default.
The library internally uses
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
to disable memory-checking temporarily.
Some inconsistent states that previously were possible (and were
even the default) are now avoided.
-DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
with each memory chunk allocated; this is occasionally more helpful
than just having a counter.
-DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
-DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
extensions.
*) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
which largely parallels "options", but is for changing API behaviour,
whereas "options" are about protocol behaviour.
Initial "mode" flags are:
SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
a single record has been written.
SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
retries use the same buffer location.
(But all of the contents must be
copied!)
[Bodo Moeller]
*) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
worked.
*) Fix problems with no-hmac etc.
[Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
Dr. Stephen Henson
committed
*) New functions RSA_get_default_method(), RSA_set_method() and
RSA_get_method(). These allows replacement of RSA_METHODs without having
to mess around with the internals of an RSA structure.
[Steve Henson]
*) Fix memory leaks in DSA_do_sign and DSA_is_prime.
Also really enable memory leak checks in openssl.c and in some
test programs.
[Chad C. Mulligan, Bodo Moeller]
Dr. Stephen Henson
committed
*) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
up the length of negative integers. This has now been simplified to just
store the length when it is first determined and use it later, rather
than trying to keep track of where data is copied and updating it to
point to the end.
[Steve Henson, reported by Brien Wheeler
<bwheeler@authentica-security.com>]
*) Add a new function PKCS7_signatureVerify. This allows the verification
of a PKCS#7 signature but with the signing certificate passed to the
function itself. This contrasts with PKCS7_dataVerify which assumes the
certificate is present in the PKCS#7 structure. This isn't always the
case: certificates can be omitted from a PKCS#7 structure and be
distributed by "out of band" means (such as a certificate database).
[Steve Henson]
Dr. Stephen Henson
committed
*) Complete the PEM_* macros with DECLARE_PEM versions to replace the
function prototypes in pem.h, also change util/mkdef.pl to add the
necessary function names.
[Steve Henson]
*) mk1mf.pl (used by Windows builds) did not properly read the
options set by Configure in the top level Makefile, and Configure
was not even able to write more than one option correctly.
Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
Dr. Stephen Henson
committed
*) New functions CONF_load_bio() and CONF_load_fp() to allow a config
file to be loaded from a BIO or FILE pointer. The BIO version will
for example allow memory BIOs to contain config info.
[Steve Henson]
*) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
Whoever hopes to achieve shared-library compatibility across versions
must use this, not the compile-time macro.
(Exercise 0.9.4: Which is the minimum library version required by
such programs?)
Note: All this applies only to multi-threaded programs, others don't
need locks.
*) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
through a BIO pair triggered the default case, i.e.
SSLerr(...,SSL_R_UNKNOWN_STATE).
[Bodo Moeller]
*) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
can use the SSL library even if none of the specific BIOs is
appropriate.
[Bodo Moeller]
*) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
for the encoded length.
[Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
Dr. Stephen Henson
committed
*) Add initial documentation of the X509V3 functions.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
PEM_write_bio_PKCS8PrivateKey() that are equivalent to
PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
secure PKCS#8 private key format with a high iteration count.
[Steve Henson]
*) Fix determination of Perl interpreter: A perl or perl5
_directory_ in $PATH was also accepted as the interpreter.
[Ralf S. Engelschall]
*) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
wrong with it but it was very old and did things like calling
PEM_ASN1_read() directly and used MD5 for the hash not to mention some
unusual formatting.
[Steve Henson]
Dr. Stephen Henson
committed
*) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
to use the new extension code.
[Steve Henson]
*) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
with macros. This should make it easier to change their form, add extra
arguments etc. Fix a few PEM prototypes which didn't have cipher as a
constant.
[Steve Henson]
*) Add to configuration table a new entry that can specify an alternative
name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
according to Mark Crispin <MRC@Panda.COM>.
[Bodo Moeller]
*) DES CBC did not update the IV. Weird.
[Ben Laurie]
des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
Changing the behaviour of the former might break existing programs --
where IV updating is needed, des_ncbc_encrypt can be used.
*) When bntest is run from "make test" it drives bc to check its
calculations, as well as internally checking them. If an internal check
fails, it needs to cause bc to give a non-zero result or make test carries
on without noticing the failure. Fixed.
[Ben Laurie]
*) DES library cleanups.
[Ulf Möller]
*) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
ciphers. NOTE: although the key derivation function has been verified
against some published test vectors it has not been extensively tested
yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
of v2.0.
[Steve Henson]
*) Instead of "mkdir -p", which is not fully portable, use new
Perl script "util/mkdir-p.pl".
Dr. Stephen Henson
committed
*) Rewrite the way password based encryption (PBE) is handled. It used to
assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
the 'parameter' field of the AlgorithmIdentifier is passed to the
underlying key generation function so it must do its own ASN1 parsing.
This has also changed the EVP_PBE_CipherInit() function which now has a
'parameter' argument instead of literal salt and iteration count values
and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
[Steve Henson]
Dr. Stephen Henson
committed
*) Support for PKCS#5 v1.5 compatible password based encryption algorithms
and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
KEY" because this clashed with PKCS#8 unencrypted string. Since this
value was just used as a "magic string" and not used directly its
value doesn't matter.
Dr. Stephen Henson
committed
[Steve Henson]
*) Introduce some semblance of const correctness to BN. Shame C doesn't
support mutable.
[Ben Laurie]
"linux-sparc" configuration.
[Christian Forster <fo@hawo.stw.uni-erlangen.de>]
*) config now generates no-xxx options for missing ciphers.
[Ulf Möller]
*) Support the EBCDIC character set (work in progress).
File ebcdic.c not yet included because it has a different license.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
*) Support BS2000/OSD-POSIX.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
*) Make callbacks for key generation use void * instead of char *.
[Ben Laurie]
*) Make S/MIME samples compile (not yet tested).
[Ben Laurie]
*) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
*) Add missing BIO_free at exit of pkcs12 application.
[Wu Zhigang]
*) Fix memory leak in conf.c.
[Steve Henson]
*) Updates for Win32 to assembler version of MD5.
[Steve Henson]
*) Set #! path to perl in apps/der_chop to where we found it
instead of using a fixed path.
[Bodo Moeller]
*) SHA library changes for irix64-mips4-cc.
[Andy Polyakov]
*) Improvements for VMS support.
[Richard Levitte]
*) Bignum library bug fix. IRIX 6 passes "make test" now!
This also avoids the problems with SC4.2 and unpatched SC5.
[Andy Polyakov <appro@fy.chalmers.se>]
Dr. Stephen Henson
committed
*) New functions sk_num, sk_value and sk_set to replace the previous macros.
These are required because of the typesafe stack would otherwise break
existing code. If old code used a structure member which used to be STACK
and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
sk_num or sk_value it would produce an error because the num, data members
are not present in STACK_OF. Now it just produces a warning. sk_set
replaces the old method of assigning a value to sk_value
(e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
that does this will no longer work (and should use sk_set instead) but
this could be regarded as a "questionable" behaviour anyway.
[Steve Henson]
*) Fix most of the other PKCS#7 bugs. The "experimental" code can now
correctly handle encrypted S/MIME data.
[Steve Henson]
*) Change type of various DES function arguments from des_cblock
to des_cblock * (meaning pointer to array with 8 char elements),
which allows the compiler to do more typechecking; it was like
that back in SSLeay, but with lots of ugly casts.
Introduce new type const_des_cblock.
[Bodo Moeller]
*) Reorganise the PKCS#7 library and get rid of some of the more obvious
problems: find RecipientInfo structure that matches recipient certificate
and initialise the ASN1 structures properly based on passed cipher.
[Steve Henson]
*) Belatedly make the BN tests actually check the results.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
to and from BNs: it was completely broken. New compilation option
NEG_PUBKEY_BUG to allow for some broken certificates that encode public
key elements as negative integers.
[Steve Henson]
*) Reorganize and speed up MD5.
[Andy Polyakov <appro@fy.chalmers.se>]
Dr. Stephen Henson
committed
*) New option -out to asn1parse to allow the parsed structure to be
output to a file. This is most useful when combined with the -strparse
option to examine the output of things like OCTET STRINGS.
[Steve Henson]
*) Make SSL library a little more fool-proof by not requiring any longer
that SSL_set_{accept,connect}_state be called before
SSL_{accept,connect} may be used (SSL_set_..._state is omitted
in many applications because usually everything *appeared* to work as
intended anyway -- now it really works as intended).
[Bodo Moeller]
*) Move openssl.cnf out of lib/.
[Ulf Möller]
Ralf S. Engelschall
committed
*) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
-Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
[Ralf S. Engelschall]
Dr. Stephen Henson
committed
*) Various fixes to the EVP and PKCS#7 code. It may now be able to
handle PKCS#7 enveloped data properly.
[Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
*) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
copying pointers. The cert_st handling is changed by this in
various ways (and thus what used to be known as ctx->default_cert
is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
any longer when s->cert does not give us what we need).
ssl_cert_instantiate becomes obsolete by this change.
As soon as we've got the new code right (possibly it already is?),
we have solved a couple of bugs of the earlier code where s->cert
was used as if it could not have been shared with other SSL structures.
Note that using the SSL API in certain dirty ways now will result
in different behaviour than observed with earlier library versions:
Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
does not influence s as it used to.
In order to clean up things more thoroughly, inside SSL_SESSION
we don't use CERT any longer, but a new structure SESS_CERT
that holds per-session data (if available); currently, this is
the peer's certificate chain and, for clients, the server's certificate
and temporary key. CERT holds only those values that can have
meaningful defaults in an SSL_CTX.
[Bodo Moeller]
*) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
from the internal representation. Various PKCS#7 fixes: remove some
evil casts and set the enc_dig_alg field properly based on the signing
key type.
[Steve Henson]
Dr. Stephen Henson
committed
*) Allow PKCS#12 password to be set from the command line or the
environment. Let 'ca' get its config file name from the environment
variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
and 'x509').
[Steve Henson]
*) Allow certificate policies extension to use an IA5STRING for the
organization field. This is contrary to the PKIX definition but
VeriSign uses it and IE5 only recognises this form. Document 'x509'
extension option.
[Steve Henson]
*) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
without disallowing inline assembler and the like for non-pedantic builds.
[Ben Laurie]
*) Support Borland C++ builder.
[Janez Jere <jj@void.si>, modified by Ulf Möller]
*) Support Mingw32.
[Ulf Möller]
*) SHA-1 cleanups and performance enhancements.
[Andy Polyakov <appro@fy.chalmers.se>]
[Andy Polyakov <appro@fy.chalmers.se>]
*) Accept any -xxx and +xxx compiler options in Configure.
[Ulf Möller]
*) Update HPUX configuration.
[Anonymous]
*) Add missing sk_<type>_unshift() function to safestack.h
[Ralf S. Engelschall]
*) New function SSL_CTX_use_certificate_chain_file that sets the
"extra_cert"s in addition to the certificate. (This makes sense
only for "PEM" format files, as chains as a whole are not
DER-encoded.)
[Bodo Moeller]
*) Support verify_depth from the SSL API.
x509_vfy.c had what can be considered an off-by-one-error:
Its depth (which was not part of the external interface)
was actually counting the number of certificates in a chain;
now it really counts the depth.
[Bodo Moeller]
*) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
instead of X509err, which often resulted in confusing error
messages since the error codes are not globally unique
(e.g. an alleged error in ssl3_accept when a certificate
didn't match the private key).
*) New function SSL_CTX_set_session_id_context that allows to set a default
value (so that you don't need SSL_set_session_id_context for each
connection using the SSL_CTX).
*) Support INSTALL_PREFIX for package builders, as proposed by
David Harris.
[Bodo Moeller]
*) New Configure options "threads" and "no-threads". For systems
where the proper compiler options are known (currently Solaris
and Linux), "threads" is the default.
[Bodo Moeller]
*) New script util/mklink.pl as a faster substitute for util/mklink.sh.
[Bodo Moeller]
*) Install various scripts to $(OPENSSLDIR)/misc, not to
$(INSTALLTOP)/bin -- they shouldn't clutter directories
such as /usr/local/bin.
[Bodo Moeller]
[Niels Poppe <niels@netbox.org>]
*) New Configure option no-<cipher> (rsa, idea, rc5, ...).
[Ulf Möller]
Dr. Stephen Henson
committed
*) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
extension adding in x509 utility.
[Steve Henson]
*) Remove NOPROTO sections and error code comments.
[Ulf Möller]
Dr. Stephen Henson
committed
*) Partial rewrite of the DEF file generator to now parse the ANSI
prototypes.
[Steve Henson]
*) New Configure options --prefix=DIR and --openssldir=DIR.
Dr. Stephen Henson
committed
*) Complete rewrite of the error code script(s). It is all now handled
by one script at the top level which handles error code gathering,
header rewriting and C source file generation. It should be much better
than the old method: it now uses a modified version of Ulf's parser to
read the ANSI prototypes in all header files (thus the old K&R definitions
aren't needed for error creation any more) and do a better job of
translating function codes into names. The old 'ASN1 error code imbedded
in a comment' is no longer necessary and it doesn't use .err files which
Dr. Stephen Henson
committed
have now been deleted. Also the error code call doesn't have to appear all
on one line (which resulted in some large lines...).
Dr. Stephen Henson
committed
[Steve Henson]
*) Change behaviour of ssl2_read when facing length-0 packets: Don't return
0 (which usually indicates a closed connection), but continue reading.
[Bodo Moeller]
*) Add support for CRL distribution points extension. Add Certificate
Policies and CRL distribution points documentation.
[Steve Henson]
*) Move the autogenerated header file parts to crypto/opensslconf.h.
[Ulf Möller]
*) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8 of keying material. Merlin has also confirmed interop with this fix
between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
[Merlin Hughes <merlin@baltimore.ie>]
*) Fix lots of warnings.
[Richard Levitte <levitte@stacken.kth.se>]
*) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
the directory spec didn't end with a LIST_SEPARATOR_CHAR.
*) Fix problems with sizeof(long) == 8.
[Andy Polyakov <appro@fy.chalmers.se>]
*) Change functions to ANSI C.
[Ulf Möller]
*) Fix typos in error codes.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
*) Remove defunct assembler files from Configure.
[Ulf Möller]
*) SPARC v8 assembler BIGNUM implementation.
[Andy Polyakov <appro@fy.chalmers.se>]
*) Support for Certificate Policies extension: both print and set.
Various additions to support the r2i method this uses.
Dr. Stephen Henson
committed
[Steve Henson]
*) A lot of constification, and fix a bug in X509_NAME_oneline() that could
return a const string when you are expecting an allocated buffer.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
types DirectoryString and DisplayText.
Dr. Stephen Henson
committed
*) Add code to allow r2i extensions to access the configuration database,
add an LHASH database driver and add several ctx helper functions.
[Steve Henson]
Dr. Stephen Henson
committed
*) Fix an evil bug in bn_expand2() which caused various BN functions to
fail when they extended the size of a BIGNUM.
[Steve Henson]
Dr. Stephen Henson
committed
*) Various utility functions to handle SXNet extension. Modify mkdef.pl to
support typesafe stack.
[Steve Henson]
*) Fix typo in SSL_[gs]et_options().
[Nils Frostberg <nils@medcom.se>]
Dr. Stephen Henson
committed
*) Delete various functions and files that belonged to the (now obsolete)
old X509V3 handling code.
[Steve Henson]
*) New Configure option "rsaref".
[Ulf Möller]
*) Don't auto-generate pem.h.
[Bodo Moeller]
*) Introduce type-safe ASN.1 SETs.
[Ben Laurie]
*) Convert various additional casted stacks to type-safe STACK_OF() variants.
*) Introduce type-safe STACKs. This will almost certainly break lots of code
that links with OpenSSL (well at least cause lots of warnings), but fear
not: the conversion is trivial, and it eliminates loads of evil casts. A
few STACKed things have been converted already. Feel free to convert more.
In the fullness of time, I'll do away with the STACK type altogether.
[Ben Laurie]
Ralf S. Engelschall
committed
*) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
specified in <certfile> by updating the entry in the index.txt file.
This way one no longer has to edit the index.txt file manually for
revoking a certificate. The -revoke option does the gory details now.
[Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Fix `openssl crl -noout -text' combination where `-noout' killed the
`-text' option at all and this way the `-noout -text' combination was
inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
[Ralf S. Engelschall]
*) Make sure a corresponding plain text error message exists for the
X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
verify callback function determined that a certificate was revoked.
[Ralf S. Engelschall]
*) Bugfix: In test/testenc, don't test "openssl <cipher>" for
ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
all available cipers including rc5, which was forgotten until now.
In order to let the testing shell script know which algorithms
are available, a new (up to now undocumented) command
"openssl list-cipher-commands" is used.
[Bodo Moeller]
*) Bugfix: s_client occasionally would sleep in select() when
it should have checked SSL_pending() first.
[Bodo Moeller]
*) New functions DSA_do_sign and DSA_do_verify to provide access to
the raw DSA values prior to ASN.1 encoding.
[Ulf Möller]
*) Tweaks to Configure
*) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
yet...
[Steve Henson]
*) New variables $(RANLIB) and $(PERL) in the Makefiles.
[Ulf Möller]
*) New config option to avoid instructions that are illegal on the 80386.
The default code is faster, but requires at least a 486.
[Ulf Möller]
*) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
SSL2_SERVER_VERSION (not used at all) macros, which are now the
same as SSL2_VERSION anyway.
[Bodo Moeller]
*) New "-showcerts" option for s_client.
[Bodo Moeller]
Dr. Stephen Henson
committed
*) Still more PKCS#12 integration. Add pkcs12 application to openssl
application. Various cleanups and fixes.
[Steve Henson]
Dr. Stephen Henson
committed
*) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
modify error routines to work internally. Add error codes and PBE init
to library startup routines.
[Steve Henson]
*) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
packing functions to asn1 and evp. Changed function names and error
codes along the way.
[Steve Henson]
Dr. Stephen Henson
committed
*) PKCS12 integration: and so it begins... First of several patches to
slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
objects to objects.h
Dr. Stephen Henson
committed
[Steve Henson]
Dr. Stephen Henson
committed
*) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
and display support for Thawte strong extranet extension.
[Steve Henson]
*) Add LinuxPPC support.
[Jeff Dubrule <igor@pobox.org>]
*) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
bn_div_words in alpha.s.
[Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
*) Make sure the RSA OAEP test is skipped under -DRSAref because
OAEP isn't supported when OpenSSL is built with RSAref.
[Ulf Moeller <ulf@fitug.de>]
*) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
so they no longer are missing under -DNOPROTO.
[Soren S. Jorvang <soren@t.dk>]
Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
*) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
doesn't work when the session is reused. Coming soon!
[Ben Laurie]
*) Fix a security hole, that allows sessions to be reused in the wrong
context thus bypassing client cert protection! All software that uses
client certs and session caches in multiple contexts NEEDS PATCHING to
allow session reuse! A fuller solution is in the works.
[Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
Ralf S. Engelschall
committed
*) Some more source tree cleanups (removed obsolete files
crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
permission on "config" script to be executable) and a fix for the INSTALL
document.
[Ulf Moeller <ulf@fitug.de>]
Dr. Stephen Henson
committed
*) Remove some legacy and erroneous uses of malloc, free instead of
Malloc, Free.
[Lennart Bang <lob@netstream.se>, with minor changes by Steve]
*) Make rsa_oaep_test return non-zero on error.
[Ulf Moeller <ulf@fitug.de>]
*) Add support for native Solaris shared libraries. Configure
solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
if someone would make that last step automatic.
[Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
*) ctx_size was not built with the right compiler during "make links". Fixed.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Change the meaning of 'ALL' in the cipher list. It now means "everything
except NULL ciphers". This means the default cipher list will no longer
enable NULL ciphers. They need to be specifically enabled e.g. with
the string "DEFAULT:eNULL".
[Steve Henson]
Dr. Stephen Henson
committed
*) Fix to RSA private encryption routines: if p < q then it would
occasionally produce an invalid result. This will only happen with
externally generated keys because OpenSSL (and SSLeay) ensure p > q.
[Steve Henson]
Ralf S. Engelschall
committed
*) Be less restrictive and allow also `perl util/perlpath.pl
/path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
because this way one can also use an interpreter named `perl5' (which is
usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
installed as `perl').
[Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Let util/clean-depend.pl work also with older Perl 5.00x versions.
[Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
advapi32.lib to Win32 build and change the pem test comparision
to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
and crypto/des/ede_cbcm_enc.c.
[Steve Henson]
*) DES quad checksum was broken on big-endian architectures. Fixed.
[Ben Laurie]
*) Comment out two functions in bio.h that aren't implemented. Fix up the
Win32 test batch file so it (might) work again. The Win32 test batch file
is horrible: I feel ill....
[Steve Henson]
Dr. Stephen Henson
committed
*) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
in e_os.h. Audit of header files to check ANSI and non ANSI
sections: 10 functions were absent from non ANSI section and not exported
from Windows DLLs. Fixed up libeay.num for new functions.
[Steve Henson]
Dr. Stephen Henson
committed
*) Make `openssl version' output lines consistent.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Fix Win32 symbol export lists for BIO functions: Added
BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
to ms/libeay{16,32}.def.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
fine under Unix and passes some trivial tests I've now added. But the
whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
added to make sure no one expects that this stuff really works in the
OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
openssl_bio.xs.
[Ralf S. Engelschall]
*) Fix the generation of two part addresses in perl.
[Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
*) Add config entry for Linux on MIPS.
[John Tobey <jtobey@channel1.com>]
*) Make links whenever Configure is run, unless we are on Windoze.
Dr. Stephen Henson
committed
*) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
Currently only issuerAltName and AuthorityKeyIdentifier make any sense
in CRLs.
[Steve Henson]
Dr. Stephen Henson
committed
Ralf S. Engelschall
committed
*) Add a useful kludge to allow package maintainers to specify compiler and
other platforms details on the command line without having to patch the
Configure script everytime: One now can use ``perl Configure
<id>:<details>'', i.e. platform ids are allowed to have details appended
to them (seperated by colons). This is treated as there would be a static
pre-configured entry in Configure's %table under key <id> with value
<details> and ``perl Configure <id>'' is called. So, when you want to
perform a quick test-compile under FreeBSD 3.1 with pgcc and without
assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
now, which overrides the FreeBSD-elf entry on-the-fly.
[Ralf S. Engelschall]
*) Disable new TLS1 ciphersuites by default: they aren't official yet.
[Ben Laurie]
Ralf S. Engelschall
committed
*) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
on the `perl Configure ...' command line. This way one can compile
OpenSSL libraries with Position Independent Code (PIC) which is needed
for linking it into DSOs.
[Ralf S. Engelschall]
*) Remarkably, export ciphers were totally broken and no-one had noticed!
Fixed.
[Ben Laurie]
*) Cleaned up the LICENSE document: The official contact for any license
questions now is the OpenSSL core team under openssl-core@openssl.org.
And add a paragraph about the dual-license situation to make sure people
recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
to the OpenSSL toolkit.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) General source tree makefile cleanups: Made `making xxx in yyy...'
display consistent in the source tree and replaced `/bin/rm' by `rm'.
Additonally cleaned up the `make links' target: Remove unnecessary
semicolons, subsequent redundant removes, inline point.sh into mklink.sh
to speed processing and no longer clutter the display with confusing
stuff. Instead only the actually done links are displayed.
[Ralf S. Engelschall]
*) Permit null encryption ciphersuites, used for authentication only. It used
to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
encryption.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
signed attributes when verifying signatures (this would break them),
the detached data encoding was wrong and public keys obtained using
X509_get_pubkey() weren't freed.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add text documentation for the BUFFER functions. Also added a work around
to a Win95 console bug. This was triggered by the password read stuff: the
last character typed gets carried over to the next fread(). If you were
generating a new cert request using 'req' for example then the last
character of the passphrase would be CR which would then enter the first
field as blank.
Dr. Stephen Henson
committed
[Steve Henson]
*) Added the new `Includes OpenSSL Cryptography Software' button as
doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
button and can be used by applications based on OpenSSL to show the
relationship to the OpenSSL project.
[Ralf S. Engelschall]
*) Remove confusing variables in function signatures in files
ssl/ssl_lib.c and ssl/ssl.h.
[Lennart Bong <lob@kulthea.stacken.kth.se>]
Ralf S. Engelschall
committed
*) Don't install bss_file.c under PREFIX/include/
[Lennart Bong <lob@kulthea.stacken.kth.se>]
Dr. Stephen Henson
committed
*) Get the Win32 compile working again. Modify mkdef.pl so it can handle
functions that return function pointers and has support for NT specific
stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
#ifdef WIN32 and WINNTs sprinkled about the place and some changes from
unsigned to signed types: this was killing the Win32 compile.
[Steve Henson]
*) Add new certificate file to stack functions,
SSL_add_dir_cert_subjects_to_stack() and
SSL_add_file_cert_subjects_to_stack(). These largely supplant
SSL_load_client_CA_file(), and can be used to add multiple certs easily
to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
This means that Apache-SSL and similar packages don't have to mess around
to add as many CAs as they want to the preferred list.
[Ben Laurie]
*) Experiment with doxygen documentation. Currently only partially applied to
ssl/ssl_lib.c.
See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
openssl.doxy as the configuration file.
[Ben Laurie]
Ralf S. Engelschall
committed
*) Get rid of remaining C++-style comments which strict C compilers hate.
[Ralf S. Engelschall, pointed out by Carlos Amengual]
Dr. Stephen Henson
committed
*) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
compiled in by default: it has problems with large keys.
[Steve Henson]
Ralf S. Engelschall
committed
*) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
DH private keys and/or callback functions which directly correspond to
their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
is needed for applications which have to configure certificates on a
per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
(e.g. s_server).
For the RSA certificate situation is makes no difference, but
for the DSA certificate situation this fixes the "no shared cipher"
problem where the OpenSSL cipher selection procedure failed because the
temporary keys were not overtaken from the context and the API provided
no way to reconfigure them.
The new functions now let applications reconfigure the stuff and they
are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
non-public-API function ssl_cert_instantiate() is used as a helper
function and also to reduce code redundancy inside ssl_rsa.c.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Move s_server -dcert and -dkey options out of the undocumented feature
area because they are useful for the DSA situation and should be
recognized by the users.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Fix the cipher decision scheme for export ciphers: the export bits are
*not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
SSL_EXP_MASK. So, the original variable has to be used instead of the
already masked variable.
[Richard Levitte <levitte@stacken.kth.se>]
Ralf S. Engelschall
committed
*) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
[Richard Levitte <levitte@stacken.kth.se>]
Ralf S. Engelschall
committed
*) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
from `int' to `unsigned int' because it's a length and initialized by
EVP_DigestFinal() which expects an `unsigned int *'.
[Richard Levitte <levitte@stacken.kth.se>]
*) Don't hard-code path to Perl interpreter on shebang line of Configure
script. Instead use the usual Shell->Perl transition trick.
[Ralf S. Engelschall]
Ralf S. Engelschall
committed
*) Make `openssl x509 -noout -modulus' functional also for DSA certificates
(in addition to RSA certificates) to match the behaviour of `openssl dsa
-noout -modulus' as it's already the case for `openssl rsa -noout
-modulus'. For RSA the -modulus is the real "modulus" while for DSA
currently the public key is printed (a decision which was already done by
`openssl dsa -modulus' in the past) which serves a similar purpose.
Additionally the NO_RSA no longer completely removes the whole -modulus
option; it now only avoids using the RSA stuff. Same applies to NO_DSA
now, too.
[Ralf S. Engelschall]
*) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
BIO. See the source (crypto/evp/bio_ok.c) for more info.
[Arne Ansper <arne@ats.cyber.ee>]
*) Dump the old yucky req code that tried (and failed) to allow raw OIDs
to be added. Now both 'req' and 'ca' can use new objects defined in the
config file.
[Steve Henson]
*) Add cool BIO that does syslog (or event log on NT).
[Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
*) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Add preliminary config info for new extension code.
[Steve Henson]
*) Make RSA_NO_PADDING really use no padding.
[Ulf Moeller <ulf@fitug.de>]
*) Generate errors when private/public key check is done.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
for some CRL extensions and new objects added.
[Steve Henson]
Dr. Stephen Henson
committed
*) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
key usage extension and fuller support for authority key id.
[Steve Henson]
*) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
padding method for RSA, which is recommended for new applications in PKCS
#1 v2.0 (RFC 2437, October 1998).
OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
against Bleichbacher's attack on RSA.
[Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
Ben Laurie]
*) Updates to the new SSL compression code
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Fix so that the version number in the master secret, when passed
via RSA, checks that if TLS was proposed, but we roll back to SSLv3
(because the server will not accept higher), that the version number
is 0x03,0x01, not 0x03,0x00
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
Dr. Stephen Henson
committed
in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
Dr. Stephen Henson
committed
*) Support for RAW extensions where an arbitrary extension can be
created by including its DER encoding. See apps/openssl.cnf for
an example.
Dr. Stephen Henson
committed
Ralf S. Engelschall
committed
*) Make sure latest Perl versions don't interpret some generated C array
code as Perl array code in the crypto/err/err_genc.pl script.
[Lars Weber <3weber@informatik.uni-hamburg.de>]
*) Modify ms/do_ms.bat to not generate assembly language makefiles since
not many people have the assembler. Various Win32 compilation fixes and
update to the INSTALL.W32 file with (hopefully) more accurate Win32
build instructions.
[Steve Henson]
*) Modify configure script 'Configure' to automatically create crypto/date.h
file under Win32 and also build pem.h from pem.org. New script
util/mkfiles.pl to create the MINFO file on environments that can't do a
'make files': perl util/mkfiles.pl >MINFO should work.
[Steve Henson]
*) Major rework of DES function declarations, in the pursuit of correctness
and purity. As a result, many evil casts evaporated, and some weirdness,
too. You may find this causes warnings in your code. Zapping your evil
casts will probably fix them. Mostly.
[Ben Laurie]
Dr. Stephen Henson
committed
*) Fix for a typo in asn1.h. Bug fix to object creation script
obj_dat.pl. It considered a zero in an object definition to mean
"end of object": none of the objects in objects.h have any zeros
so it wasn't spotted.
[Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
*) Add support for Triple DES Cipher Block Chaining with Output Feedback
Masking (CBCM). In the absence of test vectors, the best I have been able
to do is check that the decrypt undoes the encrypt, so far. Send me test
vectors if you have them.
[Ben Laurie]
*) Correct calculation of key length for export ciphers (too much space was
allocated for null ciphers). This has not been tested!
[Ben Laurie]
Dr. Stephen Henson
committed
*) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
message is now correct (it understands "crypto" and "ssl" on its
command line). There is also now an "update" option. This will update
the util/ssleay.num and util/libeay.num files with any new functions.
If you do a:
perl util/mkdef.pl crypto ssl update
it will update them.
Dr. Stephen Henson
committed
[Steve Henson]
Dr. Stephen Henson
committed
*) Overhauled the Perl interface (perl/*):
- ported BN stuff to OpenSSL's different BN library
- made the perl/ source tree CVS-aware
- renamed the package from SSLeay to OpenSSL (the files still contain
their history because I've copied them in the repository)
- removed obsolete files (the test scripts will be replaced
by better Test::Harness variants in the future)
[Ralf S. Engelschall]
*) First cut for a very conservative source tree cleanup:
1. merge various obsolete readme texts into doc/ssleay.txt
where we collect the old documents and readme texts.
2. remove the first part of files where I'm already sure that we no
longer need them because of three reasons: either they are just temporary
files which were left by Eric or they are preserved original files where
I've verified that the diff is also available in the CVS via "cvs diff
-rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
the crypto/md/ stuff).
[Ralf S. Engelschall]
*) More extension code. Incomplete support for subject and issuer alt
name, issuer and authority key id. Change the i2v function parameters
and add an extra 'crl' parameter in the X509V3_CTX structure: guess
what that's for :-) Fix to ASN1 macro which messed up
IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
[Steve Henson]
Dr. Stephen Henson
committed
*) Preliminary support for ENUMERATED type. This is largely copied from the
INTEGER code.
[Steve Henson]
*) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Make sure `make rehash' target really finds the `openssl' program.
[Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
like to hear about it if this slows down other processors.
[Ben Laurie]
*) Add CygWin32 platform information to Configure script.
[Alan Batie <batie@aahz.jf.intel.com>]
*) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
[Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
Dr. Stephen Henson
committed
*) New program nseq to manipulate netscape certificate sequences
[Steve Henson]
*) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
few typos.
[Steve Henson]
*) Fixes to BN code. Previously the default was to define BN_RECURSION
but the BN code had some problems that would cause failures when
doing certificate verification and some other functions.
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Add ASN1 and PEM code to support netscape certificate sequences.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add ASN1 and PEM code to support netscape certificate sequences.
[Steve Henson]
*) Add several PKIX and private extended key usage OIDs.
[Steve Henson]
Dr. Stephen Henson
committed
*) Modify the 'ca' program to handle the new extension code. Modify
openssl.cnf for new extension format, add comments.
[Steve Henson]
Dr. Stephen Henson
committed
*) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
and add a sample to openssl.cnf so req -x509 now adds appropriate
CA extensions.
[Steve Henson]
Dr. Stephen Henson
committed
*) Continued X509 V3 changes. Add to other makefiles, integrate with the
error code, add initial support to X509_print() and x509 application.
Dr. Stephen Henson
committed
[Steve Henson]
Dr. Stephen Henson
committed
*) Takes a deep breath and start addding X509 V3 extension support code. Add
files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
stuff is currently isolated and isn't even compiled yet.
[Steve Henson]
*) Continuing patches for GeneralizedTime. Fix up certificate and CRL
ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
Removed the versions check from X509 routines when loading extensions:
this allows certain broken certificates that don't set the version
properly to be processed.
[Steve Henson]
*) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
can still be regenerated with "make depend".
[Ben Laurie]
*) Spelling mistake in C version of CAST-128.
[Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
Dr. Stephen Henson
committed
*) Changes to the error generation code. The perl script err-code.pl
now reads in the old error codes and retains the old numbers, only
adding new ones if necessary. It also only changes the .err files if new
codes are added. The makefiles have been modified to only insert errors
when needed (to avoid needlessly modifying header files). This is done
by only inserting errors if the .err file is newer than the auto generated
C file. To rebuild all the error codes from scratch (the old behaviour)
either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
or delete all the .err files.
[Steve Henson]
Dr. Stephen Henson
committed
*) CAST-128 was incorrectly implemented for short keys. The C version has
been fixed, but is untested. The assembler versions are also fixed, but
new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
to regenerate it if needed.
[Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
Hagino <itojun@kame.net>]
*) File was opened incorrectly in randfile.c.
[Ulf Möller <ulf@fitug.de>]
*) Beginning of support for GeneralizedTime. d2i, i2d, check and print
functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
GeneralizedTime. ASN1_TIME is the proper type used in certificates et
al: it's just almost always a UTCTime. Note this patch adds new error
codes so do a "make errors" if there are problems.
[Steve Henson]
*) Correct Linux 1 recognition in config.
[Ulf Möller <ulf@fitug.de>]
*) Remove pointless MD5 hash when using DSA keys in ca.
[Anonymous <nobody@replay.com>]
*) Generate an error if given an empty string as a cert directory. Also
generate an error if handed NULL (previously returned 0 to indicate an
error, but didn't set one).
[Ben Laurie, reported by Anonymous <nobody@replay.com>]
*) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
[Ben Laurie]
*) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
parameters. This was causing a warning which killed off the Win32 compile.
[Steve Henson]
*) Remove C++ style comments from crypto/bn/bn_local.h.
[Neil Costigan <neil.costigan@celocom.com>]
Dr. Stephen Henson
committed
*) The function OBJ_txt2nid was broken. It was supposed to return a nid
based on a text string, looking up short and long names and finally
"dot" format. The "dot" format stuff didn't work. Added new function
OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
OID is not part of the table.
[Steve Henson]
*) Add prototypes to X509 lookup/verify methods, fixing a bug in
X509_LOOKUP_by_alias().
[Ben Laurie]
*) Sort openssl functions by name.
[Ben Laurie]
*) Get the gendsa program working (hopefully) and add it to app list. Remove
encryption from sample DSA keys (in case anyone is interested the password
was "1234").
[Steve Henson]
*) Make _all_ *_free functions accept a NULL pointer.
[Frans Heymans <fheymans@isaserver.be>]
*) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
NULL pointers.
[Anonymous <nobody@replay.com>]
*) s_server should send the CAfile as acceptable CAs, not its own cert.
[Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
*) Don't blow it for numeric -newkey arguments to apps/req.
[Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
*) Temp key "for export" tests were wrong in s3_srvr.c.
[Anonymous <nobody@replay.com>]
Ben Laurie
committed
*) Add prototype for temp key callback functions
SSL_CTX_set_tmp_{rsa,dh}_callback().
[Ben Laurie]
Dr. Stephen Henson
committed
*) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
Dr. Stephen Henson
committed
*) X509_name_add_entry() freed the wrong thing after an error.
[Arne Ansper <arne@ats.cyber.ee>]
*) rsa_eay.c would attempt to free a NULL context.
[Arne Ansper <arne@ats.cyber.ee>]
*) BIO_s_socket() had a broken should_retry() on Windoze.
[Arne Ansper <arne@ats.cyber.ee>]
*) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
[Arne Ansper <arne@ats.cyber.ee>]
Ralf S. Engelschall
committed
*) Make sure the already existing X509_STORE->depth variable is initialized
in X509_STORE_new(), but document the fact that this variable is still
unused in the certificate verification process.
[Ralf S. Engelschall]
Dr. Stephen Henson
committed
*) Fix the various library and apps files to free up pkeys obtained from
Dr. Stephen Henson
committed
X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
Dr. Stephen Henson
committed
[Steve Henson]
*) Fix reference counting in X509_PUBKEY_get(). This makes
demos/maurice/example2.c work, amongst others, probably.
[Steve Henson and Ben Laurie]
Ralf S. Engelschall
committed
*) First cut of a cleanup for apps/. First the `ssleay' program is now named
`openssl' and second, the shortcut symlinks for the `openssl <command>'
are no longer created. This way we have a single and consistent command
line interface `openssl <command>', similar to `cvs <command>'.
Ralf S. Engelschall
committed
Dr. Stephen Henson
committed
*) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
BIT STRING wrapper always have zero unused bits.
[Steve Henson]
*) Add CA.pl, perl version of CA.sh, add extended key usage OID.
[Steve Henson]
*) Make the top-level INSTALL documentation easier to understand.
[Paul Sutton]
*) Makefiles updated to exit if an error occurs in a sub-directory
make (including if user presses ^C) [Paul Sutton]
*) Make Montgomery context stuff explicit in RSA data structure.
[Ben Laurie]
*) Fix build order of pem and err to allow for generated pem.h.
[Ben Laurie]
*) Fix renumbering bug in X509_NAME_delete_entry().
[Ben Laurie]
*) Enhanced the err-ins.pl script so it makes the error library number
global and can add a library name. This is needed for external ASN1 and
other error libraries.
[Steve Henson]
*) Fixed sk_insert which never worked properly.
[Steve Henson]
*) Fix ASN1 macros so they can handle indefinite length construted
EXPLICIT tags. Some non standard certificates use these: they can now
be read in.
[Steve Henson]
*) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
into a single doc/ssleay.txt bundle. This way the information is still
preserved but no longer messes up this directory. Now it's new room for
the new set of documenation files.
[Ralf S. Engelschall]
*) SETs were incorrectly DER encoded. This was a major pain, because they
shared code with SEQUENCEs, which aren't coded the same. This means that
almost everything to do with SETs or SEQUENCEs has either changed name or
number of arguments.
[Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
*) Fix test data to work with the above.
[Ben Laurie]
*) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
was already fixed by Eric for 0.9.1 it seems.
[Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
*) Fix various bugs in Configure. This affects the following platforms:
nextstep
ncr-scde
unixware-2.0
unixware-2.0-pentium
sco5-cc.
[Ben Laurie]
*) Eliminate generated files from CVS. Reorder tests to regenerate files
before they are needed.
[Ben Laurie]
*) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
[Ben Laurie]
Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
*) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
changed SSLeay to OpenSSL in version strings.
*) Some fixups to the top-level documents.
[Paul Sutton]
Ralf S. Engelschall
committed
*) Fixed the nasty bug where rsaref.h was not found under compile-time
because the symlink to include/ was missing.
[Ralf S. Engelschall]
*) Incorporated the popular no-RSA/DSA-only patches
which allow to compile a RSA-free SSLeay.
[Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
*) Fixed nasty rehash problem under `make -f Makefile.ssl links'
when "ssleay" is still not found.
[Ralf S. Engelschall]
*) Added more platforms to Configure: Cray T3E, HPUX 11,
[Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
Ralf S. Engelschall
committed
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
*) Updated the README file.
[Ralf S. Engelschall]
*) Added various .cvsignore files in the CVS repository subdirs
to make a "cvs update" really silent.
[Ralf S. Engelschall]
*) Recompiled the error-definition header files and added
missing symbols to the Win32 linker tables.
[Ralf S. Engelschall]
*) Cleaned up the top-level documents;
o new files: CHANGES and LICENSE
o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
o merged COPYRIGHT into LICENSE
o removed obsolete TODO file
o renamed MICROSOFT to INSTALL.W32
[Ralf S. Engelschall]
*) Removed dummy files from the 0.9.1b source tree:
crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
[Ralf S. Engelschall]
*) Added various platform portability fixes.
Ralf S. Engelschall
committed
Ralf S. Engelschall
committed
We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
Young and Tim J. Hudson created while they were working for C2Net until
Ralf S. Engelschall
committed
summer 1998.
Ralf S. Engelschall
committed
Changes between 0.9.0b and 0.9.1b [not released]
Ralf S. Engelschall
committed
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
*) Updated a few CA certificates under certs/
[Eric A. Young]
*) Changed some BIGNUM api stuff.
[Eric A. Young]
*) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
DGUX x86, Linux Alpha, etc.
[Eric A. Young]
*) New COMP library [crypto/comp/] for SSL Record Layer Compression:
RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
available).
[Eric A. Young]
*) Add -strparse option to asn1pars program which parses nested
binary structures
[Dr Stephen Henson <shenson@bigfoot.com>]
*) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
[Eric A. Young]
*) DSA fix for "ca" program.
[Eric A. Young]
*) Added "-genkey" option to "dsaparam" program.
[Eric A. Young]
*) Added RIPE MD160 (rmd160) message digest.
[Eric A. Young]
*) Added -a (all) option to "ssleay version" command.
[Eric A. Young]
*) Added PLATFORM define which is the id given to Configure.
[Eric A. Young]
*) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
[Eric A. Young]
*) Extended the ASN.1 parser routines.
[Eric A. Young]
*) Extended BIO routines to support REUSEADDR, seek, tell, etc.
[Eric A. Young]
*) Added a BN_CTX to the BN library.
[Eric A. Young]
*) Fixed the weak key values in DES library
[Eric A. Young]
*) Changed API in EVP library for cipher aliases.
[Eric A. Young]
*) Added support for RC2/64bit cipher.
[Eric A. Young]
*) Converted the lhash library to the crypto/mem.c functions.
[Eric A. Young]
*) Added more recognized ASN.1 object ids.
[Eric A. Young]
*) Added more RSA padding checks for SSL/TLS.
[Eric A. Young]
*) Added BIO proxy/filter functionality.
[Eric A. Young]
*) Added extra_certs to SSL_CTX which can be used
send extra CA certificates to the client in the CA cert chain sending
process. It can be configured with SSL_CTX_add_extra_chain_cert().
[Eric A. Young]
*) Now Fortezza is denied in the authentication phase because
this is key exchange mechanism is not supported by SSLeay at all.
[Eric A. Young]
*) Additional PKCS1 checks.
[Eric A. Young]
*) Support the string "TLSv1" for all TLS v1 ciphers.
[Eric A. Young]
*) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
ex_data index of the SSL context in the X509_STORE_CTX ex_data.
[Eric A. Young]
*) Fixed a few memory leaks.
[Eric A. Young]
*) Fixed various code and comment typos.
[Eric A. Young]
*) A minor bug in ssl/s3_clnt.c where there would always be 4 0
bytes sent in the client random.
[Edward Bishop <ebishop@spyglass.com>]