Commit ee1c1ee8 authored by Yann Garcia's avatar Yann Garcia
Browse files

Reorganize AtsCAM config files

parent 4c6a1485
Loading
Loading
Loading
Loading
Loading
+89 −6
Changes for etc/AtsCAM/AtsCAM.cfg: 89 added lines, 6 removed lines.
Original line number Diff line number Diff line
@@ -107,61 +107,144 @@ system.utPort.params := "UT_CAM/UDP(dst_ip=10.200.60.23,dst_port=12345,src_port=
#system.utPort.params := "UT_CAM/UDP(dst_ip=172.16.35.1)"

[EXECUTE]
ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

# Check that protocolVersion is set to 2 and messageID is set to 2
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
# Check that LF container is included in 1st CAM since CA basic service activation
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02
# Check that LF container is included if time elapsed since the generation of the last CAM with the low frequency container generation is equal or larger than 500 ms
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_03
# Check that specialVehicle container is included in 1st CAM since CA basic service activation
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_04
# Check that specialVehicle container is included if time elapsed since the generation of the last CAM with the special vehicle container generation is equal or larger than 500 ms.
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_05
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_01
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_02
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_03
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_04
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_05
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_06
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_07
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_08
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_09
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_10
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_11
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_12
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_13
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_14
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_15
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_16
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_17
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_18
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_19
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_20
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_21
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_22
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_23
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_24
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_25
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_26
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_27
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_28
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_29
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_30
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_31
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_32
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_33
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_34
# Check that latest value of in-vehicle data is included in CAM
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_35
# Check that publicTransportContainer is included if vehicleRole is set to publicTransport(1)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_02
# Check that specialTransportContainer is included if vehicleRole is set to specialTransport(2)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_03
# Check that dangerousGoodsContainer is included if vehicleRole is set to dangerousGoods(3)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_04
# Check that roadWorksContainerBasic is included if vehicleRole is set to roadWork(4)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_05
# Check that rescueContainer is included if vehicleRole is set to rescue(5)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_06
# Check that emergencyContainer is included if vehicleRole is set to emergency(6)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_07
# Check that safetyCarContainer is included if vehicleRole is set to safetyCar(7)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_08
#ItsCam_TestCases.TC_CAM_MSP_BV_01
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_01
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_02
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_03
#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_01

# Check that CAMs are not generated more frequently than T_GenCamMin
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_01
# Check that CAMs are not generated less frequently than T_GenCamMax
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_02
# Check that TGenCam is set to T_GenCamMax after generating N_GenCam due to condition 2
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_03
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam and equal or larger than T_GenCam_Dcc
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_07
# Check that maximum CAM generation frequency for RSU ITS-S is 1Hz
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_08

# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the absolute difference between current direction of the originating ITS-S (towards North) and  direction included in previous CAM exceeds 4°
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_04
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the current position and position included in previous CAM exceeds 4 m
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_05
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the absolute difference between current speed and speed included in previous CAM exceeds 0,5 m/s
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_06

# Check that CAM is encapsulated in BTP type B packet
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_01
# Check that CAM is encapsulated in SHB packet
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_02
# Check that CAM is encapsulated in GN packet with lifetime lower than 1s
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_03

# Check that the IUT does not send a CAM when its content is not permitted by signing certificate
#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_01 Not implemented????

#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_02
# Check that the IUT does not send a CAM when its content is not permitted by signing certificate
#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_03

# Check that IUT discards CAM if SSP value of the signing certificate is not consistent with the provided containers
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_01 Not implemented????
# Check that IUT discards CAM if SSP value of the signing certificate  is not consistent with the provided containers.
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_02
# Check that IUT discards CAM if SSP value of the signing certificate is not consistent with the provided containers.
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_03

# Check that content of received CAM is transmitted to applications and other facilities
ItsCam_TestCases.TC_CAM_MSP_BV_01

[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
KillTimer := 10.0
+25 −6
Changes for etc/AtsCAM/AtsCAM_Codha.cf_: 25 added lines, 6 removed lines.
Original line number Diff line number Diff line
@@ -119,8 +119,7 @@ system.utPort.params := "UT_CAM/UDP(dst_ip=10.8.0.48,dst_port=12345,reuse_incomi

[EXECUTE]

# Check that protocolVersion is set to 2 and messageID is set to 2
ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
# Check that LF container is included in 1st CAM since CA basic service activation
#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02
# Check that LF container is included if time elapsed since the generation of the last CAM with the low frequency container generation is equal or larger than 500 ms
@@ -213,11 +212,31 @@ ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_07
# Check that safetyCarContainer is included if vehicleRole is set to safetyCar(7)
#ItsCam_TestCases.TC_CAM_MSD_INA_BV_08

# Check that CAMs are not generated more frequently than T_GenCamMin
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_01
# Check that CAMs are not generated less frequently than T_GenCamMax
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_02
# Check that TGenCam is set to T_GenCamMax after generating N_GenCam due to condition 2
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_03
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam and equal or larger than T_GenCam_Dcc
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_07
# Check that maximum CAM generation frequency for RSU ITS-S is 1Hz
#ItsCam_TestCases.TC_CAM_MSD_GFQ_TI_08

# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the absolute difference between current direction of the originating ITS-S (towards North) and  direction included in previous CAM exceeds 4°
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_04
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the current position and position included in previous CAM exceeds 4 m
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_05
# Check that CAM is generated immediately when the time elapsed since the last CAM generation is equal or larger than T_GenCam_Dcc and the absolute difference between current speed and speed included in previous CAM exceeds 0,5 m/s
#ItsCam_TestCases.TC_CAM_MSD_GFQ_BV_06

# Check that CAM is encapsulated in BTP type B packet
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_01
# not PICS_IS_IUT_SECURED??
# Check that CAM is encapsulated in SHB packet
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_02
# not PICS_IS_IUT_SECURED??
# Check that CAM is encapsulated in GN packet with lifetime lower than 1s
#ItsCam_TestCases.TC_CAM_MSD_PAR_BV_03

# Check that the IUT does not send a CAM when its content is not permitted by signing certificate
#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_01 Not implemented????
@@ -226,7 +245,6 @@ ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
# Check that the IUT does not send a CAM when its content is not permitted by signing certificate
#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_03


# Check that IUT discards CAM if SSP value of the signing certificate is not consistent with the provided containers
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_01 Not implemented????
# Check that IUT discards CAM if SSP value of the signing certificate  is not consistent with the provided containers.
@@ -234,7 +252,8 @@ ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
# Check that IUT discards CAM if SSP value of the signing certificate is not consistent with the provided containers.
#ItsCam_TestCases.TC_CAM_MSP_SSP_BV_03

#ItsCam_TestCases.TC_CAM_MSP_BV_01
# Check that content of received CAM is transmitted to applications and other facilities
ItsCam_TestCases.TC_CAM_MSP_BV_01

[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
−156

File deleted.

+88 −6

File changed.

Preview size limit exceeded, changes collapsed.

−197

File deleted.

Preview size limit exceeded, changes collapsed.

Loading