Review IVIM, MAPEM/SPATEM and SREM/SSEM

[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

  typeOfAddress := e_initial,

  stationType := e_passengerCar,

  stationCountryCode := 33,

  mid := '001C6B00FF51'O

}

LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpA

[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).

LogFile := "../logs/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime

[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

# GN Layer

#   ll_address             : GeoNetworking address of the TestSystem

#   latitude               : latitude of the TestSystem

#   longitude              : longitude of the TestSystem

#   distanceA              : Distance for the GeoAreaBroadcast, used for IVIM/DENM sending (default: 1000m)

#   distanceB              : Distance for the GeoAreaBroadcast, used for IVIM/DENM sending (default: 1000m)

#   angle                  : Anglee for the GeoAreaBroadcast, used for IVIM/DENM sending (default: 0m)

#   beaconing              : Set to 1 if GnLayer shall start beaconing (default: 0)

#   Beaconning timer expiry: expiry (ms)

# Ethernet layer

#   Source MAC address of the TestSystem : mac_src

#   Broadcast address                    : mac_bc

#   Ethernet type for ITS                : eth_type

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd), the IUT

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd), the TestSystem

#   src_port: source port

# Pcap layer

#   Pcap filter : filter

#   mac_src     : used to exclude TestSystem sent message from the capture

#   Online mode :

#     Local NIC : nic

#                 If set, online mode is used

#   Offline mode (nic is present but not set):

#     File to read    : file

#     Frame offset    : frame_offset

#     Time offset     : time_offset

#     Save sent packet: save_mode=[0|1]

system.camPort.params := "IVIM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"

# IVIM UpperTester port based on UDP (ETSI Wlan)

system.utPort.params := "UT_IVIM/UDP(dst_ip=192.168.0.102,dst_port=12345,src_ip=192.168.0.104,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=F8CAB8083918,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12345)"

[EXECUTE]

#ItsIvim_TestCases.TC_IS_IVI_MSGF_BV_01

ItsIvim_TestCases.TC_IS_IVI_EVGN_BV_01

[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

TCPPort := 0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1