Update for cygwin support

etc/AtsCAM/ITSTS.cfg → etc/AtsCAM/AtsCAM.cfg

@@ -4,7 +4,7 @@
 LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
   typeOfAddress := e_initial,
   stationType := e_passengerCar,
-  stationCountryCode := 0,
+  stationCountryCode := 33,
   mid := '001C6B00FF51'O
 }
 
@@ -34,7 +34,10 @@ LogEventTypes:= Yes
 #   ll_address             : GeoNetworking address of the TestSystem
 #   latitude               : latitude of the TestSystem
 #   longitude              : longitude of the TestSystem
-#   beaconing              : Set to 1 if GnLayer shall start beaconing
+#   distanceA              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   distanceB              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   angle                  : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
+#   beaconing              : Set to 1 if GnLayer shall start beaconing (default: 0)
 #   Beaconning timer expiry: expiry (ms)
 # Ethernet layer
 #   Source MAC address of the TestSystem : mac_src
@@ -57,7 +60,7 @@ LogEventTypes:= Yes
 #     Time offset     : time_offset
 #     Save sent packet: save_mode=[0|1]
 
-system.camPort.params := "CAM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
+system.camPort.params := "CAM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
 
 # CAM UpperTester port based on UDP (ETSI Wlan)
 system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.0.102,dst_port=12345,src_ip=192.168.0.104,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=F8CAB8083918,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12345)"

etc/AtsDENM/ITSTS.cfg → etc/AtsDENM/AtsDENM.cfg

@@ -34,7 +34,10 @@ LogEventTypes:= Yes
 #   ll_address             : GeoNetworking address of the TestSystem
 #   latitude               : latitude of the TestSystem
 #   longitude              : longitude of the TestSystem
-#   beaconing              : Set to 1 if GnLayer shall start beaconing
+#   distanceA              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   distanceB              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   angle                  : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
+#   beaconing              : Set to 1 if GnLayer shall start beaconing (default: 0)
 #   Beaconning timer expiry: expiry (ms)
 # Ethernet layer
 #   Source MAC address of the TestSystem : mac_src
@@ -57,7 +60,7 @@ LogEventTypes:= Yes
 #     Time offset     : time_offset
 #     Save sent packet: save_mode=[0|1]
 
-system.denmPort.params := "DENM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
+system.denmPort.params := "DENM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
 
 # DENM UpperTester port based on UDP (ETSI Wlan)
 system.utPort.params := "UT_DENM/UDP(dst_ip=192.168.0.102,dst_port=12345,src_ip=192.168.0.104,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=F8CAB8083918,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12345)"

etc/AtsGeoNetworking/ITSTS.cfg → etc/AtsGeoNetworking/AtsGeoNetworking.cfg

@@ -34,7 +34,10 @@ LogEventTypes:= Yes
 #   ll_address             : GeoNetworking address of the TestSystem
 #   latitude               : latitude of the TestSystem
 #   longitude              : longitude of the TestSystem
-#   beaconing              : Set to 1 if GnLayer shall start beaconing
+#   distanceA              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   distanceB              : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
+#   angle                  : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
+#   beaconing              : Set to 1 if GnLayer shall start beaconing (default: 0)
 #   Beaconning timer expiry: expiry (ms)
 # Ethernet layer
 #   Source MAC address: mac_src