Commit a5d8b643 authored by garciay's avatar garciay
Browse files

STF525: Test AtsCAM/AtsDENM in secured mode

parent d9c05bd8

etc/AtsCAM/AtsCAM.cfg

+14 −11
Original line number Diff line number Diff line
@@ -46,10 +46,10 @@ LogEventTypes:= Yes 
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : latitude of the Test System

#   longitude              : longitude of the Test System

#   latitude               : Latitude of the Test System

#   longitude              : Longitude of the Test System

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

#   expiry                 : Beaconning timer expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
@@ -79,10 +79,10 @@ LogEventTypes:= Yes 
#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)

#   dst_port: Destination port

#   src_ip  : Source IPv4 address (aa.bb.cc.dd)

#   src_port: Source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax)
@@ -93,16 +93,19 @@ LogEventTypes:= Yes 
#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : 1 to save sent packet, 0 otherwise

#     save_mode   : Set to 1 to save sent packet, 0 otherwise



system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,deviceMode=1)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,deviceMode=1,its_aid=141,secured_mode=1,encrypted_mode=0,certificate=CERT_IUT_F_AT,peer_certificate=CERT_TS_F_AT,sec_db_path=/home/vagrant/tmp/test_01)/ETH(mac_src=080027D2B658,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=080027D2B658,nic=eth1,filter=and ether proto 0x8947)"

# Non secured IUT

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,device_mode=1)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1)/ETH(mac_src=080027D2B658)/PCAP(mac_src=080027D2B658,nic=eth1,filter=and ether proto 0x8947)"

# Secured IUT

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,deviceMode=1)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,deviceMode=1,secured_mode=1,certificate=CERT_IUT_F_AT,sec_db_path=/home/vagrant/tmp/test_01)/ETH(mac_src=080027D2B658,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=080027D2B658,nic=eth1,filter=and ether proto 0x8947)"



# CAM UpperTester port based on UDP (ETSI Wlan)

system.utPort.params := "UT_GN(loopback=0)/UDP(dst_ip=192.168.1.250,dst_port=12345,src_ip=192.168.1.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"

system.utPort.params := "UT_CAM(loopback=0)/UDP(dst_ip=192.168.1.250,dst_port=12345,src_ip=192.168.1.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"



[EXECUTE]

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

etc/AtsDENM/AtsDENM.cfg

+13 −10
Original line number Diff line number Diff line
@@ -44,10 +44,10 @@ LogEventTypes:= Yes 
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : latitude of the Test System

#   longitude              : longitude of the Test System

#   latitude               : Latitude of the Test System

#   longitude              : Longitude of the Test System

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

#   expiry                 : Beaconning timer expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
@@ -77,10 +77,10 @@ LogEventTypes:= Yes 
#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)

#   dst_port: Destination port

#   src_ip  : Source IPv4 address (aa.bb.cc.dd)

#   src_port: Source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax)
@@ -91,12 +91,15 @@ LogEventTypes:= Yes 
#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : 1 to save sent packet, 0 otherwise

#     save_mode   : Set to 1 to save sent packet, 0 otherwise



system.denmPort.params := "DENM(next_header=btpB,header_type=tsb)/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4958,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,deviceMode=1,its_aid=141,secured_mode=1,certificate=CERT_TS_A_AT,sec_db_path=/home/vagrant/tmp/test_01)/ETH(mac_src=0800275c4958,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4958,nic=eth1,filter=and ether proto 0x8947)"

# Non secured device

system.denmPort.params := "DENM(next_header=btpB,header_type=tsb)/BTP(type=btpB,dst_port=2002)/GN(ll_address=0800275c4958,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,device_mode=1)/ETH(mac_src=0800275c4958)/PCAP(mac_src=0800275c4958,nic=eth1,filter=and ether proto 0x8947)"

# Secured device

#system.denmPort.params := "DENM(next_header=btpB,header_type=tsb)/BTP(type=btpB,dst_port=2002)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,deviceMode=1,secured_mode=1,certificate=CERT_IUT_F_AT,sec_db_path=/home/vagrant/tmp/test_01)/ETH(mac_src=080027D2B658,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=080027D2B658,nic=eth1,filter=and ether proto 0x8947)"



# DENM UpperTester port based on UDP (ETSI Wlan)

system.utPort.params := "UT_DENM(loopback=1,station_id=10143)" #/UDP(dst_ip=192.168.0.102,dst_port=12345,src_ip=192.168.0.104,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=F8CAB8083918,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=eth1,filter=and udp port 12345)"

system.utPort.params := "UT_DENM(loopback=1,station_id=10143)" #/UDP(dst_ip=192.168.1.250,dst_port=12345,src_ip=192.168.1.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"



[EXECUTE]

ItsDenm_TestCases.TC_DEN_MSGF_BV_01

etc/AtsGeoNetworking/AtsGeoNetworking.cfg

+8 −8
Original line number Diff line number Diff line
@@ -41,10 +41,10 @@ LogEventTypes:= Yes 
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : latitude of the Test System

#   longitude              : longitude of the Test System

#   latitude               : Latitude of the Test System

#   longitude              : Longitude of the Test System

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

#   expiry                 : Beaconning timer expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
@@ -74,10 +74,10 @@ LogEventTypes:= Yes 
#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)

#   dst_port: Destination port

#   src_ip  : Source IPv4 address (aa.bb.cc.dd)

#   src_port: Source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax)
@@ -88,7 +88,7 @@ LogEventTypes:= Yes 
#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : 1 to save sent packet, 0 otherwise

#     save_mode   : Set to 1 to save sent packet, 0 otherwise



# Single GeoNetworking component port

system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=38)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"

etc/TestCodec/TestCodec.cfg

+7 −7
Original line number Diff line number Diff line
@@ -55,9 +55,9 @@ LogEventTypes:= Yes 
#   its_aid                : ITS AID as defined by ETSI TS 102 965 V1.2.1. Default: 141

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : Latitude of the Test System

#   longitude              : Kongitude of the Test System

#   longitude              : Longitude of the Test System

#   beaconing              : Set to 1 if the Test System shall start beaconing

#   Beaconing timer expiry : Expiry (ms)

#   expiry                 : Beaconing timer expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
@@ -88,10 +88,10 @@ LogEventTypes:= Yes 
#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)

#   dst_port: Destination port

#   src_ip  : Source IPv4 address (aa.bb.cc.dd)

#   src_port: Source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax)
@@ -103,7 +103,7 @@ LogEventTypes:= Yes 
#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : 1 to save sent packet, 0 otherwise

#     save_mode   : Set 1 to save sent packet, 0 otherwise



# Single GeoNetworking component port

# GN port using PCAP file