Commit 780f1227 authored by garciay's avatar garciay
Browse files

Add AtsPki configuration file

parent c9525c0c
[MODULE_PARAMETERS]
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.
# The GeoNetworking address of the IUT.
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
typeOfAddress := e_initial,
stationType := e_unknown, #e_roadSideUnit,
stationCountryCode := 0, #33,
mid := '4C5E0C14D2EA'O
}
LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB
# Enable Security support
LibItsGeoNetworking_Pics.PICS_GN_SECURITY := true
# Root path to access certificate stored in files, identified by certficate ID
LibItsSecurity_Pixits.PX_CERTIFICATE_POOL_PATH := "/home/vagrant/tmp";
# Configuration sub-directory to access certificate stored in files
LibItsSecurity_Pixits.PX_IUT_SEC_CONFIG_NAME := "test_01";
[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).
LogFile := "../logs/%e.%h-%r.%s"
FileMask := LOG_ALL | USER | DEBUG | MATCHING
ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
#FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
#TimeStampFormat := DateTime
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# secured_mode : Set to 1 if message exchanges shall be signed
# encrypted_mode : Set to 1 if message exchanges shall be encrypted
# NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1
# secure_db_path : Path to the certificates and keys storage location
# hash : Hash algorithm to be used when secured mode is set
# Authorized values are SHA-256 or SHA-384
# Default: SHA-256
# signature : Signature algorithm to be used when secured mode is set
# Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384
# Default: NISTP-256
# cypher : Cyphering algorithm to be used when secured mode is set
# Authorized values are NISTP-256, BP-256 and BP-384
# Default: NISTP-256
# Ethernet layer
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
# Single GeoNetworking component port
system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730)/HTTP(codecs=gn:geonetworkimg_codec)/TCP(debug=1,server=ptsv2.com,port=80,use_ssl=0)"
# GeoNetworking UpperTester port based on UDP
system.utPort.params := "UT_GN(loopback=0)/UDP(dst_ip=192.168.0.250,dst_port=12345,src_ip=192.168.0.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"
[EXECUTE]
ItsSecurity_TestCases.TC_TEST_1
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_MSG_01_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_01_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_02_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_03_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_04_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_05_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_08_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_01_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_02_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_03_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_04_BV
#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_05_BV
[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
KillTimer := 10.0
TCPPort := 0
LocalAddress := 127.0.0.1
TCPPort := 12000
NumHCs := 1
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment