STF545: Start ATS development

etc/AtsSecurity/AtsSecurity.cfg

@@ -103,11 +103,31 @@ LogEventTypes:= Yes
 # Single GeoNetworking component port
 system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730)/ETH(mac_src=080027d2b658,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and ether proto 0x8947)"
 
-# UpperTester port based on UDP
+# GeoNetworking UpperTester port based on UDP
 system.utPort.params := "UT_GN(loopback=0)/UDP(dst_ip=192.168.1.250,dst_port=12345,src_ip=192.168.1.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"
 
+# CAM UpperTester port based on UDP
+system.camUtPort.params := "UT_GN(loopback=0)/UDP(dst_ip=192.168.1.250,dst_port=12345,src_ip=192.168.1.253,src_port=12345)/ETH(mac_src=080027d2b658,mac_dst=90fd61e61902,eth_type=0800)/PCAP(mac_src=080027d2b658,nic=eth1,filter=and udp port 12345)"
+
 [EXECUTE]
-ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_01_BV
+ItsSecurity_TestCases.TC_TEST_1
+
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_MSG_01_BV
+
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_01_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_02_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_03_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_04_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_05_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_CAM_08_BV
+
+
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_01_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_02_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_03_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_04_BV
+#ItsSecurity_TestCases.TC_SEC_ITSS_SND_GENMSG_05_BV
+
 
 [MAIN_CONTROLLER]
 # The options herein control the behavior of MC.

etc/TestCodec/TestCodec.cfg

@@ -109,7 +109,7 @@ LogEventTypes:= Yes
 # GN port using PCAP file
 #system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141,secured_mode=1,certificate=CERT_TS_A_AT,sec_db_path=/home/vagrant/tmp/Yann)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=../../../testdata/test_61_beacon_sec.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
 # GN port using NIC
-system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,beaconing=1,expiry=500,device_mode=0,its_aid=141,secured_mode=1,certificate=CERT_TS_A_AT,sec_db_path=/home/vagrant/tmp/test_01,encrypted_mode=1,cypher=NISTP-256)/ETH(mac_src=4C5E0C14D2EB,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=4C5E0C14D2EB,nic=eth1,file=,filter=and not ether src DC536045AF7E and ether proto 0x8947,frame_offset=0,save_mode=0)"
+system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,beaconing=1,expiry=500,device_mode=0,its_aid=141,secured_mode=1,certificate=CERT_TS_A_AT,sec_db_path=/home/vagrant/tmp/test_01,encrypted_mode=0,cypher=NISTP-256)/ETH(mac_src=4C5E0C14D2EB,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=4C5E0C14D2EB,nic=eth1,file=,filter=and not ether src DC536045AF7E and ether proto 0x8947,frame_offset=0,save_mode=0)"
 # Commsignia GN port
 #system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141,secured_mode=0,certificate=ta_cert_nistp256_sha256)/COMMSIGNIA(mac_src=4C5E0C14D2EA,bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,sourcePort=7943,its_aid=141,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,file=../../../testdata/commsignia_61_beacon.pcap,filter=and (udp port 30000 or udp port 7943))"
 # Multiple GeoNetworking component port
@@ -169,7 +169,7 @@ system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192
 #TestCodec_GeoNetworking.tc_GeoNet_Port_2          # Use simulator of file to run this test
                                                    # Used to test device_mode=0,beaconing=1,beacon codec
                                                    # With startPassBeaconing
-#TestCodec_GeoNetworking.tc_GeoNet_Port_3          # Use to test beaconing with secured mode set in config file
+TestCodec_GeoNetworking.tc_GeoNet_Port_3          # Use to test beaconing with secured mode set in config file
                                                    # Used to test device_mode=1,beaconing=1,nic
                                                    # Also used to generate secured/unsecured beacons
 #TestCodec_GeoNetworking.tc_GeoNet_Port_4          # Use simulator of file to run this test with secured mode set in config file
@@ -320,11 +320,11 @@ system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192
 #TestCodec_SignedAndEncryptedMessages.tc_test_encrypt_aes_128_ccm_test_1
 #TestCodec_SignedAndEncryptedMessages.tc_test_encrypt_aes_128_ccm_test_2
 #TestCodec_SignedAndEncryptedMessages.tc_test_encrypt_aes_128_ccm_test_3
-TestCodec_SignedAndEncryptedMessages.tc_encrypted_signed_message_1
-TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_2
-TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_3
-TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_4
-TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_5
+#TestCodec_SignedAndEncryptedMessages.tc_encrypted_signed_message_1
+#TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_2
+#TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_3
+#TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_4
+#TestCodec_SignedAndEncryptedMessages.tc_decrypted_signed_message_5
 
 [MAIN_CONTROLLER]
 # The options herein control the behavior of MC.