Newer
Older
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
t_maxTransInterval.stop;
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
repeat;
}
[] t_maxTransInterval.timeout {
log("*** " & testcasename() & ": FAIL: CAM was transmited w/o unrecognized request header ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_06_01_BV
/**
* @desc Check that IUT restarts the certificate sending timer when the certificate has been sent
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
* with
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent CAM at TIME_1
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* and the IUT having received a CAM
* at TIME_2 (TIME_1 +0.3sec)
* containing header_fields['signer_info'].signer.type
* indicating 'certificate_digest_with_ecdsap256'
* and containing header_fields['signer_info'].signer.digest
* referencing an unknown certificate
* and the IUT having sent CAM at TIME_3 (TIME_3 > TIME_2)
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* Expected results:
* ensure that
* when
* the IUT is sending the next CAM at TIME_4
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* then
* the difference between TIME_4 and TIME_3 is about 1sec
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_07_01_TI
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
*/
testcase TC_SEC_ITSS_SND_CAM_07_01_TI() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var SignerInfo v_signerInfo;
var ItsCam v_component;
var boolean v_firstCertReceived := false;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[v_firstCertReceived == false] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
log("*** " & testcasename() & ": INFO: Initial conditions: The first CAM with certificate is received ***");
v_firstCertReceived := true;
f_sleep(0.3);
// Send secured message with request for unrecognized certificate
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn), v_signerInfo);
f_sendSecuredCam(
cc_taCert_F,
{
m_header_field_unrecognised_certificate(
f_HashedId3FromHashedId8(
f_calculateDigestFromCertificate(
v_signerInfo.signerInfo.certificate
)
)
)
},
e_certificate_digest_with_sha256
);
repeat;
}
[v_firstCertReceived == true] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
// start a timeout of one second to check
// that the next cert will be received after this timeout
t_maxTransInterval.start;
log("*** " & testcasename() & ": INFO: Initial conditions: The requested CAM with certificate is received ***");
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
t_maxTransInterval.stop;
log("*** " & testcasename() & ": FAIL: CAM certificate inclusion time wasn't restarted ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
repeat;
}
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": PASS: The CAM certificate inclusion timer has been restarted ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_07_01_TI
/**
* @desc Check that the IUT sends the Secured CAM containing the signer_info of type certificate when it received a CAM containing a request of unrecognized certificate that matches with the currently used AT certificate ID of the IUT
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
* with
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent CAM at TIME_1
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* and the IUT having received a SecuredMessage
* at TIME_2 (TIME_1 < TIME_2 < TIME_1+1sec)
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value
* referencing to the AT certificate
* and not containing HashedId3 value
* referencing to the AA certificate
* Expected results:
* ensure that
* when
* the IUT is requested to send a CAM
* at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1+1sec)
* then
* the IUT sends a SecuredMessage
* containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'certificate'
* and containing certificate
* referenced by the requested digest
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_08_01_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
*/
testcase TC_SEC_ITSS_SND_CAM_08_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
var SignerInfo v_si;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
tc_ac.stop;
t_maxTransInterval.start;
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn),v_si);
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message with request for unrecognized certificate
f_sendSecuredCam(
cc_taCert_A,
{
m_header_field_unrecognised_certificate( // containing digests
f_HashedId3FromHashedId8( // containing HashedId3 value
f_calculateDigestFromCertificate(
v_si.signerInfo.certificate // referencing to the AT certificate
)
)
// and not containing HashedId3 value referencing to the AA certificate
)
},
e_certificate
);
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate(
v_si.signerInfo.certificate
)
)))) {
tc_ac.stop;
t_maxTransInterval.stop;
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
repeat;
}
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": FAIL: Requested certificate was not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_08_01_BV
/**
* @desc Check that the sent secured CAM contains the signer_info of type certificate_chain when the ITS-S has received a CAM containing a request of unrecognized certificate that matches with the AA certificate ID that issued its currently used AT certificate ID of the IUT
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
* with
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent a CAM
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* at TIME_1
* and the IUT having received a SecuredMessage
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value
* referencing to the AA certificate
* at TIME_2 (TIME_1 < TIME_2 < TIME_1+1sec)
* Expected results:
* ensure that
* when
* the IUT is requested to send a CAM
* at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1+1sec)
* then
* the IUT sends a SecuredMessage
* and containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'certificate_chain'
* and containing certificates[last]
* indicating the AT certificate
* and containing certificates[last-1]
* indicating the AA certificate
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_09_01_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
*/
testcase TC_SEC_ITSS_SND_CAM_09_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
var SignerInfo v_si;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
tc_ac.stop;
t_maxTransInterval.start;
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn),v_si);
f_getCertificateSignerInfo(v_si.signerInfo.certificate, v_si);
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message with request for unrecognized certificate
f_sendSecuredCam(
cc_taCert_A,
{
m_header_field_unrecognised_certificate( // containing digests
f_HashedId3FromHashedId8( // containing HashedId3 value
v_si.signerInfo.digest // referencing to the AA certificate
)
)
});
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate_chain
)))) -> value v_geoNwInd {
var SignerInfo v_signerInfo;
var CertificateChain v_certificates;
var integer v_certificateChainLength;
tc_ac.stop;
t_maxTransInterval.stop;
// Extract certificate chain
f_getMsgSignerInfo(v_geoNwInd.msgIn.gnPacket.securedMsg, v_signerInfo);
v_certificates := v_signerInfo.signerInfo.certificates;
v_certificateChainLength := lengthof(v_certificates);
if (v_certificateChainLength >= 2) { // Check length
if ( // Check Content
not(
(v_certificates[0].subject_info.subject_type == e_authorization_authority) and
// Check the certificate chain contains certificates[last] indicating the AT certificate
(v_certificates[1].subject_info.subject_type == e_authorization_ticket)
// Check the certificate chain contains certificates[last-1] indicating the AA certificate
)) {
log("*** " & testcasename() & ": FAIL: Unexpected certificate chain content ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
} else {
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate chain was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
} else {
log("*** " & testcasename() & ": FAIL: Unexpected certificate chain content length ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate chain ***");
repeat;
}
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": FAIL: The certificate chain has not been received during 1 sec ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_09_01_BV
/**
* @desc Check that the IUT doesn't send a secured CAM contains the signer_info of type certificate_chain when the AA certificate was previously requested and already received from another ITS-S
* Config Id: CF01
* Initial conditions:
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent a CAM
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* at TIME_1
* and the IUT having received a SecuredMessage
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value (HASH1)
* referencing to the AA certificate
* at TIME_2 (TIME_1 < TIME_2 < TIME_1+1sec)
* and the IUT having received a SecuredMessage
* containing header_fields['signer_info'].signer.type
* indicating 'certificate_chain'
* containing AA certificate
* having HashedId3 value of HASH1
* at TIME_3 (TIME_2 < TIME_3 < TIME_2+0.1sec)
* Expected results:
* ensure that
* the IUT is requested to send a CAM
* at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1+1sec)
* then
* the IUT sends a SecuredMessage
* and containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'digest'
* or indicating 'certificate'
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_09_02_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
*/
testcase TC_SEC_ITSS_SND_CAM_09_02_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 1.1;
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
var SignerInfo v_si;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
if (not(PICS_PLUGTEST_VERSION)) {
log("*** " & testcasename() & ": ERROR: 'PICS_PLUGTEST_VERSION' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up(); // init IUT with CERT_IUT_A_AT signed with CERT_TS_A_AA
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
// Test adapter configuration
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
tc_ac.stop;
t_maxTransInterval.start;
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn),v_si);
f_getCertificateSignerInfo(v_si.signerInfo.certificate, v_si);
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message with request for unrecognized certificate
f_sendSecuredCam(
cc_taCert_B1 , // certificate signed with CERT_TS_B_AA
{
m_header_field_unrecognised_certificate( // containing digests
f_HashedId3FromHashedId8( // containing HashedId3 value
v_si.signerInfo.digest // referencing to the CERT_TS_A_AA certificate
)
)
});
// Send secured message signed with certificate_chain
f_sendSecuredCam(
cc_taCert_A, // sign message with CERT_TS_A_AT signed with CERT_TS_A_AA
e_certificate_chain // and send both certs in the chain
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
);
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate_chain
)))) {
log("*** " & testcasename() & ": FAIL: CAM retransmition with unexpected certificate_chain ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate chain ***");
[f_CamReceived] t_maxTransInterval.timeout {
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate chain was successfully skipped ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_09_02_BV
/**
* @desc Check that Secured CAM generation time is inside the validity period of the signing certificate;
* Check that message generation time value is realistic
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
* with
* the IUT being in the 'authorized' state
* the IUT being requested to include certificate in the next CAM
* Expected results:
* ensure that
* when
* the IUT is requested to send CAM
* then
* the IUT sends a SecuredMessage
* containing header_fields ['generation_time']
* containing generation_time
* indicating GEN_TIME (CUR_TIME - 5min <= GEN_TIME <= CUR_TIME + 5min)
* and containing header_fields ['signer_info']
* containing signer
* containing type
* indicating 'certificate'
* and containing certificate
* containing validity_restrictions['time_end']
* containing end_validity
* indicating value > GEN_TIME
* or containing validity_restrictions['time_start_and_end']
* containing start_validity
* indicating value <= GEN_TIME
* and containing end_validity
* indicating value > GEN_TIME
* or containing validity_restrictions['time_start_and_duration']
* containing start_validity (X_START_VALIDITY)
* indicating value <= GEN_TIME
* and containing duration
* indicating value > GEN_TIME - X_START_VALIDITY
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_10_01_BV
* @reference ETSI TS 103 097 v1.2.1, clauses 5.4 and 7.1
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
*/
testcase TC_SEC_ITSS_SND_CAM_10_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const integer c_timeThreshold := 1000 * 60; /** Time threshold in milliseconds */
var GeoNetworkingInd v_geoNwInd;
var SignerInfo v_signerInfo;
var Certificate v_certificate;
var HeaderField v_headerField;
var Time64 v_generationTime;
var ValidityRestriction v_validity;
var integer v_currentTime, v_lowerBound, v_upperBound;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage(
superset(
mw_header_field_generation_time,
mw_header_field_signer_info_certificate,
mw_header_field_its_aid_CAM
))))) -> value v_geoNwInd {
tc_ac.stop;
log("*** " & testcasename() & ": INFO: CAM transmission with certificate ***");
v_currentTime := f_getCurrentTime();
log("v_currentTime (us)=", v_currentTime * 1000);
v_lowerBound := (v_currentTime - c_timeThreshold) * 1000;
v_upperBound := (v_currentTime + c_timeThreshold) * 1000;
// Extract generation_time
f_getMsgHeaderField(v_geoNwInd.msgIn.gnPacket.securedMsg, e_generation_time, v_headerField);
v_generationTime := v_headerField.headerField.generation_time;
// Extract certificate
f_getMsgSignerInfo(v_geoNwInd.msgIn.gnPacket.securedMsg, v_signerInfo);
v_certificate := v_signerInfo.signerInfo.certificate;
// Check current time
if (match(v_generationTime, (v_lowerBound .. v_upperBound))) {
log("*** " & testcasename() & ": PASS: Generation time matches current time ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
} else {
log("*** " & testcasename() & ": FAIL: Generation time does not match current time " & int2str(v_currentTime-v_lowerBound) & " / " & int2str(v_upperBound - v_currentTime) & " . ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
// Check generation_time validity
if (
(f_getCertificateValidityRestriction(v_certificate, e_time_start_and_end, v_validity) == true) and
(v_generationTime >= (v_validity.validity.time_start_and_end.start_validity * 1000000) and
(v_generationTime < (v_validity.validity.time_start_and_end.end_validity * 1000000)))
) {
log("*** " & testcasename() & ": PASS: Generation time within certificate validity/time_start_and_end ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
} else if (
(f_getCertificateValidityRestriction(v_certificate, e_time_end, v_validity) == true) and
(v_generationTime < (v_validity.validity.end_validity * 1000000))
) {
log("*** " & testcasename() & ": PASS: Generation time within certificate validity ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
} else if (f_getCertificateValidityRestriction(v_certificate, e_time_start_and_duration, v_validity) == true) {
if (PICS_PLUGTEST_VERSION) {
log("*** " & testcasename() & ": FAIL: Usage of time_start_and_duration is forbidden in TS103097 v1.2.5 ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
if ((v_generationTime >= (v_validity.validity.time_start_and_duration.start_validity * 1000000)) and
(v_generationTime < (f_duration2time(v_validity.validity.time_start_and_duration.duration_) * 1000000))
) {
log("*** " & testcasename() & ": PASS: Generation time within certificate validity ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
} else {
log("*** " & testcasename() & ": FAIL: Generation time not within certificate validity ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
}
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
repeat;
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_10_01_BV
/**
* @desc Check that the IUT sends certificate request when it receives a message from unknown station
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with
* the IUT being in the 'authorized' state
* and the IUT has receiving a SecuredMessage
* containing header_fields['signer_info'].signer
* containing type
* indicating 'certificate_digest_with_sha256'
* and containing digest
* indicating HashedId3 value DIGEST_A
* referencing an unknown certificate
* Expected results:
* ensure that
* when
* the IUT is requested to send CAM
* then
* the IUT sends a SecuredMessage
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value
* indicating DIGEST_A
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_12_01_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
*/
testcase TC_SEC_ITSS_SND_CAM_12_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
var HashedId8 v_expectedHashedId8;
var HashedId3 v_expectedHashedId3;
var GeoNetworkingPdu v_securedGnPduToBeSent;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Send secured message from unknown ITS-S
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
f_getCertificateDigest(
cc_taCert_F,
v_expectedHashedId8
);
v_expectedHashedId3 := f_HashedId3FromHashedId8(v_expectedHashedId8);
// preamble: waiting for CAM with certificate and send a CAM with unknown digest right after that
v_securedGnPduToBeSent := f_prepareSecuredCam(cc_taCert_F);
geoNetworkingPort.clear;
tc_ac.start;
alt {
[] geoNetworkingPort.receive
{
f_sendGeoNetMessage(m_geoNwReq_linkLayerBroadcast(v_securedGnPduToBeSent));
tc_ac.stop;
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of preamble 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_request_unrecognized_certificate(
{ v_expectedHashedId3 }
))))) {
tc_ac.stop;
log("*** " & testcasename() & ": PASS: CAM received with request for unrecognized certificate");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": FAIL: CAM received without request for unrecognized certificate ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_12_01_BV
/**
* @desc Check that the Secured CAM contains non-empty payload of type signed
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with
* the IUT being in the 'authorized' state
* Expected results:
* ensure that
* when
* the IUT is requested to send a CAM
* then
* the IUT sends a SecuredMessage
* and containing payload_field
* containing type
* indicating 'signed'
* and containing not-empty data
* </pre>
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_14_01_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
*/
testcase TC_SEC_ITSS_SND_CAM_14_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
?,
mw_payload(
e_signed
))))) {
tc_ac.stop;
log("*** " & testcasename() & ": PASS: CAM received with exactly 1 signed payload");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_14_01_BV
* @desc Check that the secured CAM contains only the trailer field of type signature and no other trailer fields
* Config Id: CF01
* Initial conditions:
* with
* the IUT being in the 'authorized' state
* Expected results:
* ensure that
* the IUT is requested to send a CAM
* then
* the IUT sends a SecuredMessage
* containing trailer_fields
* containing trailer_fields[0]
* containing type
* indicating 'signature'
* and not containing any other items
* @see ETSI TS 103 096-2 v1.3.1 TP_SEC_ITSS_SND_CAM_15_01_BV
* @reference ETSI TS 103 097 v1.2.1, clause 7.1
*/
testcase TC_SEC_ITSS_SND_CAM_15_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const integer c_nbVerification := 3;
var integer v_nbVerification := 0;
var GeoNetworkingInd v_geoNwInd;
var SignerInfo v_signerInfo;
var Certificate v_certificate;
var boolean v_certificateReceived := false;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");