Newer
Older
* @author ETSI / STF405 / STF449 / STF484
* @desc CAM Testcases
*
*/
module ItsCam_TestCases {
// LibIts
import from LibItsCam_TestSystem all;
import from ItsCam_TpFunctions all;
// 5.2.1
group camMessageDissemination {
group camMessageFormat {
/**
* @desc Check that protocolVersion is set to 1 and messageID is
* set to 2.
* <pre>
* Pics Selection: PICS_CAM_GENERATION
* Initial conditions:
* with {
* the IUT being in the "initial state"
* }
* Expected behaviour:
* ensure that {
* when {
* a CAM is generated
* }
* then {
* the IUT sends a valid CAM
* containing ITS PDU header
* containing protocolVersion
* indicating value 1
* and containing messageID
* indicating value 2
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/FMT/BV-01
* @reference ETSI EN 302 637-2 , Annex B.1
*/
testcase TC_CAM_MSD_FMT_BV_01() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_FMT_BV_01();
} // end TC_CAM_MSD_FMT_BV_01
/**
* @desc Check that LF container is included in 1st CAM since CA
* basic service activation.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PIC_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state"
* and the IUT has not sent any CAM yet
* }
* Expected behaviour:
* ensure that {
* when {
* a CAM is generated
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing lowFrequencyContainer
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/FMT/BV-02
* @reference ETSI EN 302 637-2 , clause 6.1.3
*/
testcase TC_CAM_MSD_FMT_BV_02() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_FMT_BV_02();
} // end TC_CAM_MSD_FMT_BV_02
/**
* @desc Check that LF container is included if time elapsed since
* the generation of the last CAM with the low frequency
* container generation is equal or larger than 500 ms.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PIC_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state"
* and the IUT has sent a CAM
* containing cam
* containing camParameters
* containing lowFrequencyContainer at time TIME_1
* and the IUT has not sent CAM
* containing cam
* containing camParameters
* containing lowFrequencyContainer after TIME_1
* }
* Expected behaviour:
* ensure that {
* when {
* a CAM is generated at time TIME_2 >= (TIME_1 + 500ms)
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing lowFrequencyContainer
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/FMT/BV-03
* @reference ETSI EN 302 637-2 , clause 6.1.3
*/
testcase TC_CAM_MSD_FMT_BV_03() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_FMT_BV_03();
} // end TC_CAM_MSD_FMT_BV_03
/**
* @desc Check that specialVehicle container is included in 1st CAM
* since CA basic service activation.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND PICS_SPECIALVEHICLECONTAINER AND NOT PIC_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state"
* and the IUT is configured to advertise itself as a special vehicle
* and the IUT has not sent any CAM yet
* }
* Expected behaviour:
* ensure that {
* when {
* a CAM is generated
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing specialVehicleContainer
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/FMT/BV-04
* @reference ETSI EN 302 637-2 , clause 6.1.3
*/
testcase TC_CAM_MSD_FMT_BV_04() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_FMT_BV_04();
} // end TC_CAM_MSD_FMT_BV_04
/**
* @desc Check that specialVehicle container is included if time
* elapsed since the generation of the last CAM with the
* special vehicle container generation is equal or larger
* than 500 ms.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND PICS_SPECIALVEHICLECONTAINER AND NOT PIC_RSU
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
* Initial conditions:
* with {
* the IUT being in the "initial state"
* and the IUT has sent a CAM
* containing cam
* containing camParameters
* containing specialVehicleContainer at time TIME_1
* and the IUT has not sent CAM
* containing cam
* containing camParameters
* containing specialVehicleContainer after TIME_1
* }
* Expected behaviour:
* ensure that {
* when {
* a CAM is generated at time TIME_2 >= (TIME_1 + 500ms)
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing specialVehicleContainer
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/FMT/BV-05
* @reference ETSI EN 302 637-2 , clause 6.1.3
*/
testcase TC_CAM_MSD_FMT_BV_05() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_FMT_BV_05();
} // end TC_CAM_MSD_FMT_BV_05
} // end group camMessageFormat
group camInformationAdaptation {
group camInVehicleData {
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Curvature value
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .curvature
* VALUE: measured value
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_01() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_01();
} // end TC_CAM_MSD_INA_BV_01_01
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Brake pedal being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .brakePedalActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-02
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_02() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_02();
} // end TC_CAM_MSD_INA_BV_01_02
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Brake pedal being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .brakePedalActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-03
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_03() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_03();
} // end TC_CAM_MSD_INA_BV_01_03
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Gas pedal being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .gasPedalActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-04
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_04() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_04();
} // end TC_CAM_MSD_INA_BV_01_04
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Gas pedal being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .gasPedalActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-05
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_05() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_05();
} // end TC_CAM_MSD_INA_BV_01_05
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Emergency brake being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .emergencyBrakeActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-06
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_06() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_06();
} // end TC_CAM_MSD_INA_BV_01_06
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Emergency brake being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .emergencyBrakeActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-07
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_07() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_07();
} // end TC_CAM_MSD_INA_BV_01_07
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Collision warning being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .collisionWarningActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-08
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_08() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_08();
} // end TC_CAM_MSD_INA_BV_01_08
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Collision warning being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .collisionWarningActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-09
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_09() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_09();
} // end TC_CAM_MSD_INA_BV_01_09
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: ACC being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .accActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-10
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_10() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_10();
} // end TC_CAM_MSD_INA_BV_01_10
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: ACC being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .accActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-11
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_11() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_11();
} // end TC_CAM_MSD_INA_BV_01_11
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Cruise control being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .cruiseControl
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-12
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_12() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_12();
} // end TC_CAM_MSD_INA_BV_01_12
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Cruise control being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .cruiseControl
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-13
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_13() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_13();
} // end TC_CAM_MSD_INA_BV_01_13
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Speed limiter being activated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .speedLimiterActive
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-14
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_14() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_14();
} // end TC_CAM_MSD_INA_BV_01_14
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Speed limiter control being deactivated
* FIELD: highFrequencyContainer
* .basicVehicleContainerHighFrequency
* .accelerationControl
* .speedLimiterActive
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-15
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_15() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_15();
} // end TC_CAM_MSD_INA_BV_01_15
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Low beam headlights being activated
* FIELD: lowFrequencyContainer
* .basicVehicleContainerLowFrequency
* .exteriorLights
* .lowBeamHeadlightsOn
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-16
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_16() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_16();
} // end TC_CAM_MSD_INA_BV_01_16
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Low beam headlights being deactivated
* FIELD: lowFrequencyContainer
* .basicVehicleContainerLowFrequency
* .exteriorLights
* .lowBeamHeadlightsOn
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-17
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_17() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_17();
} // end TC_CAM_MSD_INA_BV_01_17
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: High beam headlights being activated
* FIELD: lowFrequencyContainer
* .basicVehicleContainerLowFrequency
* .exteriorLights
* .highBeamHeadlightsOn
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-18
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_18() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_18();
} // end TC_CAM_MSD_INA_BV_01_18
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: High beam headlights being deactivated
* FIELD: lowFrequencyContainer
* .basicVehicleContainerLowFrequency
* .exteriorLights
* .highBeamHeadlightsOn
* VALUE: 0
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-19
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_19() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_19();
} // end TC_CAM_MSD_INA_BV_01_19
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU
* Initial conditions:
* with {
* the IUT being in the "initial state
* }
* INFO: Left turn signal being activated
* FIELD: lowFrequencyContainer
* .basicVehicleContainerLowFrequency
* .exteriorLights
* .leftTurnSignalOn
* VALUE: 1
*
* Expected behaviour:
* ensure that {
* when {
* the IUT is alerted about INFO
* }
* then {
* the IUT sends a valid CAM
* containing cam
* containing camParameters
* containing FIELD set to VALUE
* }
* }
* </pre>
*
* @see ETSI TS 102 868-2 TP/CAM/MSD/INA/BV-01-20
* @reference ETSI EN 302 637-2 , clause 5.2
*/
testcase TC_CAM_MSD_INA_BV_01_20() runs on ItsCam system ItsCamSystem {
f_CAM_MSD_INA_BV_01_20();
} // end TC_CAM_MSD_INA_BV_01_20
/**
* @desc Check that latest value of in-vehicle data is included
* in CAM.
* <pre>
* Pics Selection: PICS_CAM_GENERATION AND NOT PICS_RSU