Newer
Older
[MODULE_PARAMETERS]
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
typeOfAddress := e_initial,
stationType := e_unknown,
stationCountryCode := 0,
mid := '4C5E0C14D2DC'O
}
LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any
[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).
LogFile := "../logs/%e.%h-%r.%s"
FileMask := LOG_ALL | USER | DEBUG | MATCHING
ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
#TimeStampFormat := DateTime
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# Ethernet layer
# Source MAC address: mac_src
# Broadcast address : mac_bc
# Ethernet type : eth_type
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset
# Time offset : time_offset
# Save sent packet: save_mode=[0|1]
# Single GeoNetworking component port
system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_beacon.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"
#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"
# Multiple GeoNetworking component port
Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"
Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"
# BTP port
system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"
# CAM port
system.camPort.params := "CAM/BTP(type=btpA,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"
# DENM port
system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"
# UpperTester port based on UDP
system.utPort.params := "UT/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=udp port 12346)"
#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket
# GeoNetworking Ind
#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket
#TestCodec_GeoNetworking.tc_GeoNet_Port
#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing
#GeoNetworking UpperTester
#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize
#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2
# Btp PDU
#TestCodec_Btp.tc_Btp_A_Without_Payload
#TestCodec_Btp.tc_Btp_A
#TestCodec_Btp.tc_Btp_B
#TestCodec_Btp.tc_BtpReq_A
# CAM PDU
#TestCodec_CAM.tc_CamReq
#TestCodec_CAM.tc_Cam_Port
# DENM PDU