submodule etsi-nfv-common { yang-version 1.1; belongs-to etsi-nfv-descriptors { prefix nfv; } organization "European Telecommunications Standards Institute (ETSI)"; description "Common data types for ETSI data models."; revision 2019-04-25 { description "Initial revision Common data structures to support VNFD and NSD according to: ETSI GS NFV-IFA 014 Ed261v252 ETSI GS NFV-IFA 011 Ed261v254"; } /* * Identities. */ identity layer-protocol { } identity ethernet { base layer-protocol; } identity mpls { base layer-protocol; } identity odu2 { base layer-protocol; } identity ipv4 { base layer-protocol; } identity ipv6 { base layer-protocol; } identity pseudo-wire { base layer-protocol; } identity address-type { description "Describes the type of the address to be assigned to the CP instantiated from the parent CPD. Value: • MAC address. • IP address. • … The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD."; reference "GS NFV IFA011: Section 7.1.3.3, AddressData information element."; } identity mac-address { base address-type; } identity ip-address { base address-type; } identity supported-operation { description "Indicates which operations are available for this DF via the VNF LCM interface. Instantiate VNF, Query VNF and Terminate VNF are supported in all DF and therefore need not be included in this list."; reference "GS NFV IFA011: Section 7.1.8.2 VnfDf information element"; } identity instantiate-vnf { base supported-operation; description "This operation instantiates a particular DF of a VNF based on the definition in the VNFD."; reference "GS NFV IFA007: Section 7.2.3 Instantiate VNF Operation"; } identity scale-vnf { base supported-operation; description "This operation provides methods to request scaling a VNF in multiple ways: • horizontal scaling: - scale out: adding additional VNFC instances to the VNF to increase capacity - scale in: removing VNFC instances from the VNF, in order to release unused capacity"; reference "GS NFV IFA007: Section 7.2.4 Scale VNF Operation"; } identity scale-vnf-to-level { base supported-operation; description "This operation scales an instantiated VNF of a particular DF to a target size. The target size is either expressed as an instantiation level of that DF as defined in the VNFD, or given as a list of scale levels, one per scaling aspect of that DF. Instantiation levels and scaling aspects are declared in the VNFD. Typically, the result of this operation is adding and/or removing Network Functions Virtualization Infrastructure (NFVI) resources to/from the VNF."; reference "GS NFV IFA007: Section 7.2.5 Scale VNF To Level Operation"; } identity change-vnf-flavour { base supported-operation; description "This operation changes the DF of a VNF instance."; reference "GS NFV IFA007: Section 7.2.6 Change VNF Flavour Operation"; } identity terminate-vnf { base supported-operation; description "This operation terminates a VNF. A VNF can be terminated gracefully or forcefully. Graceful termination means that the VNFM arranges to take the VNF out of service, e.g. by asking the VNF's EM to take the VNF out of service, and only after that shuts down the VNF and releases the resources. Forceful termination means that the VNFM immediately shuts down the VNF and releases the resources. A time interval can be specified for taking the VNF out of service, after which the VNF is shut down if taking it out of service has not completed."; reference "GS NFV IFA007: Section 7.2.7 Terminate VNF Operation"; } identity query-vnf { base supported-operation; description "This operation provides information about VNF instances. The applicable VNF instances can be chosen based on filtering criteria, and the information can be restricted to selected attributes."; reference "GS NFV IFA007: Section 7.2.9 Query VNF Operation"; } identity heal-vnf { base supported-operation; description "This operation enables the NFVO to request a VNFM to perform a VNF healing procedure."; reference "GS NFV IFA007: Section 7.2.10 Heal VNF Operation"; } identity operate-vnf { base supported-operation; description "This operation enables requesting to change the state of a VNF instance, including starting and stopping the VNF instance."; reference "GS NFV IFA007: Section 7.2.11 Operate VNF Operation"; } identity modify-vnf-information { base supported-operation; description "This operation allows updating information about a VNF instance."; reference "GS NFV IFA007: Section 7.2.12 Modify VNF Operation"; } identity cp-role { description "Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } identity root { base cp-role; } identity leaf { base cp-role; } identity checksum-algorithm { description "Identifies the algorithms supported for the purpose of calculating the checksum."; reference "GS NFV IFA011: Section 7.1.6.10 Checksum information element."; } identity sha-224 { base checksum-algorithm; description "SHA-224."; reference "GS NFV IFA011: Section 7.1.6.10 Checksum information element."; } identity sha-256 { base checksum-algorithm; description "SHA-256."; reference "GS NFV IFA011: Section 7.1.6.10 Checksum information element."; } identity sha-384 { base checksum-algorithm; description "SHA-384."; reference "GS NFV IFA011: Section 7.1.6.10 Checksum information element."; } identity sha-512 { base checksum-algorithm; description "SHA-512."; reference "GS NFV IFA011: Section 7.1.6.10 Checksum information element."; } identity storage-type { description "Base type of storage that identities can derive from."; } identity root-storage { base storage-type; description "Root type of storage."; } identity swap-storage { base storage-type; description "Swap type of storage."; } identity ephemeral-storage { base storage-type; description "Ephemeral type of storage."; } identity forwarding-behaviour { description "Base identity for forwarding behaviour."; } identity all { base forwarding-behaviour; description "Traffic flows shall be forwarded simultaneously to all CP or SAP instances created from the referenced CP profile(s)."; } identity lb { base forwarding-behaviour; description "Traffic flows shall be forwarded to one CP or SAP instance created from the referenced CP profile(s) selected based on a load-balancing algorithm."; } identity vip-function { description "Indicates the function the virtual IP address is used for."; } identity high-availability { base vip-function; description "High availability function."; } identity load-balancing { base vip-function; description "Load balancing function."; } identity vnic-type { description "Describes the type of the virtual network interface realizing the CPs instantiated from this CPD. This is used to determine which mechanism driver(s) to be used to bind the port. Value: • NORMAL • VIRTIO • DIRECT • BAREMETAL • VIRTIO-FORWARDER • DIRECT-PHYSICAL • SMART-NIC"; } identity normal { base vnic-type; description "Normal NIC."; } identity virtio { base vnic-type; description "VirtIO NIC."; } identity direct { base vnic-type; description "Direct NIC type."; } identity bare-metal { base vnic-type; description "Bare metal NIC type."; } identity virtio-forwarder { base vnic-type; description "VirtIO Forwarder NIC type."; } identity direct-physical { base vnic-type; description "Direct physical NIC type."; } identity smart-nic { base vnic-type; description "SmartNIC or Smart NIC type."; } /* * Typedefs */ typedef flow-pattern { type enumeration { enum line; enum tree; enum mesh; } } typedef affinity-type { type enumeration { enum "affinity"; enum "anti-affinity"; } } typedef affinity-scope { type enumeration { enum "nfvi-node"; enum "zone-group"; enum "zone"; enum "nfvi-pop"; } } typedef internal-lifecycle-management-script-event { type enumeration { enum "start-instantiation"; enum "end-instantiation"; enum "start-scaling"; enum "end-scaling"; enum "start-healing"; enum "end-healing"; enum "start-termination"; enum "end-termination"; enum "start-vnf-flavour-change"; enum "end-vnf-flavour-change"; enum "start-vnf-operation-change"; enum "end-vnf-operation-change"; enum "start-vnf-ext-conn-change"; enum "end-vnf-ext-conn-change"; enum "start-vnfinfo-modification"; enum "end-vnfinfo-modification"; } } grouping local-affinity-or-anti-affinity-rule { list local-affinity-or-anti-affinity-rule { key "type scope"; leaf type { type affinity-type; description "Specifies whether the rule is an affinity rule or an anti-affinity rule."; reference "GS NFV IFA011: Section 7.1.8.11, LocalAffinityOrAntiAffinityRule information element."; } leaf scope { type affinity-scope; description "Specifies the scope of the rule, possible values are 'NFVI-PoP', 'Zone', 'ZoneGroup', 'NFVI-node'."; reference "GS NFV IFA011: Section 7.1.8.11, LocalAffinityOrAntiAffinityRule information element."; } } } grouping connectivity-type { container connectivity-type { leaf-list layer-protocol { type identityref { base layer-protocol; } description "Identifies the protocols that the VL uses (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire). The top layer protocol of the VL protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers."; reference "GS NFV IFA011: Section 7.1.7.3, ConnectivityType information element."; } leaf flow-pattern { type flow-pattern; description "Identifies the flow pattern of the connectivity (Line, Tree, Mesh)."; reference "GS NFV IFA011: Section 7.1.7.3, ConnectivityType information element."; } } } grouping link-bitrate-requirements { leaf root { type uint64; units "Mbps"; mandatory true; description "Specifies the throughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN)."; reference "GS NFV IFA011: Section 7.1.8.6, LinkBitrateRequirements information element."; } leaf leaf { type uint64; units "Mbps"; description "Specifies the throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E-LAN branches)."; reference "GS NFV IFA011: Section 7.1.8.6, LinkBitrateRequirements information element."; } } grouping monitoring-parameter { leaf name { type string; description "Human readable name of the monitoring parameter."; reference "GS NFV IFA011: Section 7.1.11.3, MonitoringParameter information element."; } leaf performance-metric { type string; description "Performance metric that is monitored. This attribute shall contain the related 'Measurement Name' value as defined in clause 7.2 of ETSI GS NFV-IFA 027"; reference "GS NFV IFA011: Section 7.1.11.3, MonitoringParameter information element and Section 7.2 of ETSI GS NFV-IFA 027."; } leaf collection-period { type uint64; units "ms"; description "An attribute that describes the recommended periodicity at which to collect the performance information. VNFM determines if this parameter is considered. The vendor may provide this information as a guidance for creating PmJobs if needed."; reference "GS NFV IFA011: Section 7.1.11.3, MonitoringParameter information element."; } } grouping security-parameters { leaf signature { type string; description "Provides the signature of the signed part of the descriptor."; reference "GS NFV IFA014: Section 6.2.5, SecurityParameters information element."; } leaf algorithm { type string; description "Identifies the algorithm used to compute the signature."; reference "GS NFV IFA014: Section 6.2.5, SecurityParameters information element."; } leaf certificate { type string; description "Provides a certificate or a reference to a certificate to validate the signature."; reference "GS NFV IFA014: Section 6.2.5, SecurityParameters information element."; } } grouping cpd { description "A Cpd information element describes network connectivity to a compute resource or a VL."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; leaf id { type string; description "Identifier of this Cpd information element."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } leaf-list layer-protocol { default ethernet; type identityref { base layer-protocol; } description "Identifies a protocol that the connection points corresponding to the CPD support for connectivity purposes (e.g. Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire, etc.)."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } leaf role { type identityref { base cp-role; } description "Identifies the role of the connection points corresponding to the CPD in the context of the traffic flow patterns in the VNF, PNF or NS. For example an NS with a tree flow pattern within the NS will have legal cpRoles of ROOT and LEAF."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } leaf description { type string; description "Provides human-readable information on the purpose of the connection point (e.g. connection point for control plane traffic)."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } list protocol { key "associated-layer-protocol"; leaf associated-layer-protocol { type identityref { base layer-protocol; } description "One of the values of the attribute layerProtocol of the Cpd IE."; reference "GS NFV IFA011: Section 7.1.6.8 CpProtocolData information element"; } list address-data { key "type"; leaf type { type identityref { base address-type; } description "Describes the type of the address to be assigned to the CP instantiated from the parent CPD. Value: • MAC address. • IP address. • Etc. The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD."; reference "GS NFV IFA011: Section 7.1.3.3 AddressData information element"; } container l2-address-data { when "../type='mac-address'"; leaf mac-address-assignment { type boolean; mandatory true; description "Specify if the MAC address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. If it is set to False, it will be provided by an external entity, e.g. OSS/BSS."; reference "GS NFV IFA011: Section 7.1.3.5 L2AddressData information element"; } description "Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD. Shall be present when the addressType is MAC address."; reference "GS NFV IFA011: Section 7.1.3.3 AddressData information element"; } container l3-address-data { when "../type='ip-address'"; leaf ip-address-assignment { type boolean; mandatory true; description "Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. "; reference "GS NFV IFA011: Section 7.1.3.4, L3AddressData information element."; } leaf floating-ip-activated { type boolean; mandatory true; description "Specify if the floating IP scheme is activated on the CP or not."; reference "GS NFV IFA011: Section 7.1.3.4, L3AddressData information element."; } leaf ip-address-type { type enumeration { enum "ipv4"; enum "ipv6"; } description "Define address type. The address type should be aligned with the address type supported by the layerProtocol attribute of the parent VnfExtCpd."; reference "GS NFV IFA011: Section 7.1.3.4, L3AddressData information element."; } leaf number-of-ip-addresses { type uint32; description "Minimum number of IP addresses to be assigned based on this L3AddressData information element."; reference "GS NFV IFA011: Section 7.1.3.4, L3AddressData information element."; } } description "Provides information on the addresses to be assigned to the CP(s) instantiated from the CPD."; reference "GS NFV IFA011: Section 7.1.6.8 CpProtocolData information element"; } description "Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol. When a PnfExtCpd as defined in ETSI GS NFV-IFA 014 [i.8] is inherited from this Cpd, the cardinality is set to 0."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } leaf trunk-mode { type boolean; description "Information about whether the Cp instantiated from this CPD is in Trunk mode (802.1Q or other). When operating in 'trunk mode', the Cp is capable of carrying traffic for several VLANs. A cardinality of 0 implies that trunkMode is not configured for the Cp i.e. It is equivalent to Boolean value 'false'."; reference "GS NFV IFA011: Section 7.1.6.3 Cpd information element"; } } grouping security-group-rule { list security-group-rule { key "id"; leaf id { type string; description "Identifier of this SecurityGroupRule information element."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf description { type string; description "Human readable description of the security group rule."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf direction { type enumeration { enum ingress; enum egress; } default "ingress"; description "The direction in which the security group rule is applied. Permitted values: INGRESS, EGRESS. Defaults to INGRESS."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf ether-type { type enumeration { enum ipv4; enum ipv6; } default "ipv4"; description "Indicates the protocol carried over the Ethernet layer. Permitted values: IPV4, IPV6. Defaults to IPV4."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf protocol { type enumeration { enum tcp; enum udp; enum icmp; } default "tcp"; description "Indicates the protocol carried over the IP layer. Permitted values: any protocol defined in the IANA protocol registry, e.g. TCP, UDP, ICMP, etc. Defaults to TCP."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf port-range-min { must ". <= ../port-range-max"; type uint16; default "0"; description "Indicates minimum port number in the range that is matched by the security group rule. Defaults to 0."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } leaf port-range-max { must ". >= ../port-range-min"; type uint16; default "65535"; description "Indicates maximum port number in the range that is matched by the security group rule. Defaults to 65535."; reference "GS NFV IFA011: Section 7.1.6.9, SecurityGroupRule information element."; } description "Defines security group rules to be used by the VNF."; reference "GS NFV IFA011: Section 7.1.2, VNFD information element."; } } }