# Copyright (c) ETSI 2017. # https://forge.etsi.org/etsi-forge-copyright-notice.txt definitions: Link: description: > This type represents a link to a resource using an absolute URI. type: object required: - href properties: href: description: > URI of another resource referenced from a resource. Shall be an absolute URI (i.e. a UTI that contains {apiRoot}). $ref: "#/definitions/Uri" NotificationLink: description: > This type represents a link to a resource in a notification, using an absolute or relative URI. type: object required: - href properties: href: description: > URI of a resource referenced from a notification. Should be an absolute URI (i.e. a URI that contains {apiRoot}), however, may be a relative URI (i.e. a URI where the {apiRoot} part is omitted) if the {apiRoot} information is not available. $ref: "#/definitions/Uri" KeyValuePairs: description: > This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of keyvalue pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 8259. In the following example, a list of key-value pairs with four keys ("aString", "aNumber", "anArray" and "anObject") is provided to illustrate that the values associated with different keys can be of different type. type: object ApiVersionInformation: description: > This type represents API version information. type: object required: - uriPrefix - apiVersions properties: uriPrefix: description: > Specifies the URI prefix for the API, in the following form {apiRoot}/{apiName}/{apiMajorVersion}/. type: string apiVersions: description: > Version(s) supported for the API signaled by the uriPrefix attribute. type: array items: type: object required: - version properties: version: description: > Identifies a supported version. The value of the version attribute shall be a version identifier as specified in clause 9.1 (SOL013). type: string isDeprecated: description: > If such information is available, this attribute indicates whether use of the version signaled by the version attribute is deprecated (true) or not (false). A deprecated version is still supported by the API producer but is recommended not to be used any longer. When a version is no longer supported, it does not appear in the response body. type: boolean retirementDate: description: > The date and time after which the API version will no longer be supported. This attribute may be included if the value of the isDeprecated attribute is set to true and shall be absent otherwise. $ref: "#/definitions/DateTime" VnfInstanceSubscriptionFilter: description: > This type represents subscription filter criteria to match VNF instances. type: object anyOf: - oneOf: - required: - vnfdId - required: - vnfProductsFromProviders - oneOf: - required: - vnfInstanceIds - required: - vnfInstanceNames properties: vnfdIds: description: > If present, match VNF instances that were created based on a VNFD identified by one of the vnfdId values listed in this attribute. The attributes "vnfdIds" and "vnfProductsFromProviders" are alternatives to reference to VNF instances that are based on certain VNFDs in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. type: array items: $ref: "#/definitions/Identifier" vnfProductsFromProviders: description: > If present, match VNF instances that belong to VNF products from certain providers. The attributes "vnfdIds" and "vnfProductsFromProviders" are alternatives to reference to VNF instances that are based on certain VNFDs in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. type: array items: type: object required: - vnfProvider properties: vnfProvider: description: > Name of the VNF provider to match. type: string vnfProducts: description: > If present, match VNF instances that belong to VNF products with certain product names, from one particular provider. type: array items: type: object required: - vnfProductName properties: vnfProductName: description: > Name of the VNF product to match. type: string versions: description: > If present, match VNF instances that belong to VNF products with certain versions and a certain product name, from one particular provider. type: array items: type: object required: - vnfSoftwareVersion properties: vnfSoftwareVersion: description: > Software version to match. $ref: "#/definitions/Version" vnfdVersions: description: > If present, match VNF instances that belong to VNF products with certain VNFD versions, a certain software version and a certain product name, from one particular provider. type: array items: $ref: "#/definitions/Version" vnfInstanceIds: description: > If present, match VNF instances with an instance identifier listed in this attribute. The attributes "vnfInstanceIds" and "vnfInstanceNames" are alternatives to reference to particular VNF Instances in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. type: array items: $ref: "#/definitions/Identifier" vnfInstanceNames: description: > If present, match VNF instances with a VNF Instance Name listed in this attribute. The attributes "vnfInstanceIds" and "vnfInstanceNames" are alternatives to reference to particular VNF Instances in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. type: array items: type: string VimConnectionInfo: description: > This type represents parameters to connect to a VIM for managing the resources of a VNF instance. This structure is used to convey VIM-related parameters over the Or-Vnfm interface. Additional parameters for a VIM may be configured into the VNFM by means outside the scope of the present document, and bound to the identifier of that VIM. type: object required: - id - vimType properties: id: description: > The identifier of the VIM Connection. This identifier is managed by the NFVO. $ref: "#/definitions/Identifier" vimId: description: > The identifier of the VIM instance. This identifier is managed by the NFVO. Shall be present to address additional information about the VIM if such information has been configured into the VNFM by means outside the scope of the present document, and should be absent otherwise. $ref: "#/definitions/Identifier" vimType: description: > Discriminator for the different types of the VIM information. The value of this attribute determines the structure of the "interfaceInfo" and "accessInfo" attributes, based on the type of the VIM. The set of permitted values is expected to change over time as new types or versions of VIMs become available. The ETSI NFV registry of VIM-related information provides access to information about VimConnectionInfo definitions for various VIM types. The structure of the registry is defined in Annex C of SOL003. type: string interfaceInfo: description: > Information about the interface or interfaces to the VIM, if applicable, such as the URI of an interface endpoint to communicate with the VIM. The applicable keys are dependent on the content of vimType. Alternatively, such information may have been configured into the VNFM and bound to the vimId. $ref: "#/definitions/KeyValuePairs" accessInfo: description: > Authentication credentials for accessing the VIM, and other access-related information such as tenants or infrastructure resource groups (see note). The applicable keys are dependent on the content of vimType. If the VimConnectionInfo structure is part of an HTTP response payload body, sensitive attributes that are children of this attributes (such as passwords) shall not be included. If the VimConnectionInfo structure is part of an HTTP request payload body, sensitive attributes that are children of this attribute (such as passwords) shall be present if they have not been provisioned out of band. If applicable, this attribute also provides information about the resourceGroupIds that are accessible using a particular set of credentials. See definition of "resourceGroupId" in clause 9.5.3.3. Once the connectivity between VNFM and VIM is provided through a secure connection over HTTP Secure (HTTP over SSL/TLS), and the connection might also be established through a VPN (for example TLS-based VPN tunnelling) for site-to-site connection, the "accessInfo" JSON data structure, and the sensitive data related information ("username"/"password" as required properties for authentication purpose), will be transmitted as plain text through a TLS tunnel without additional encoding/encryption before transmitting it, making the sensitive data visible to the endpoint. The base64 encoded certificates are only used by the VNFM to verify the authenticity of the interface endpoint of the VIM. $ref: "#/definitions/KeyValuePairs" extra: description: > VIM type specific additional information. The applicable structure, and whether or not this attribute is available, is dependent on the content of vimType. $ref: "#/definitions/KeyValuePairs" ResourceHandle: required: - resourceId type: object description: > This type represents the information that allows addressing a virtualised resource that is used by a VNF instance. Information about the resource is available from the VIM. properties: vimConnectionId: description: > Identifier of the VIM connection to manage the resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. The applicable "VimConnectionInfo" structure, which is referenced by vimConnectionId, can be obtained from the "vimConnectionInfo" attribute of the "VnfInstance" structure. $ref: "#/definitions/Identifier" resourceProviderId: description: > Identifier of the entity responsible for the management of the resource. This attribute shall only be supported and present when VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "#/definitions/Identifier" resourceId: description: > Identifier of the resource in the scope of the VIM or the resource provider. $ref: "#/definitions/IdentifierInVim" vimLevelResourceType: description: > The value set of the "vimLevelResourceType" attribute is within the scope of the VIM or the resource provider and can be used as information that complements the ResourceHandle. This value set is different from the value set of the "type" attribute in the ResourceDefinition (refer to clause 9.5.3.2 in SOL003). type: string VnfExtCpData: description: > This type represents configuration information for external CPs created from a CPD. type: object required: - cpdId properties: cpdId: description: > The identifier of the CPD in the VNFD. In case this identifier refers to a CPD with trunking enabled, the external CP instances created from this CPD will represent ports in a trunk. $ref: "#/definitions/IdentifierInVnfd" cpConfig: description: > List of instance data that need to be configured on the CP instances created from the respective CPD. type: array items: $ref: "#/definitions/VnfExtCpConfig" VnfExtCpConfig: description: > This type represents an externally provided link port or network address information per instance of an external connection point. In case a link port is provided, the VNFM shall use that link port when connecting the external CP to the external VL. In a link port is not provided, the VNFM shall create a link port on the external VL, and use that link port to connect the external CP to the external VL. type: object required: - id properties: id: description: > Identifier of the VnfExtCpConfig entry. Managed by the API consumer. $ref: "#/definitions/IdentifierInVnf" parentCpConfigId: description: > Reference to the "VnfExtCpConfig" entry that corresponds to the parent port of the trunk. Only present in "VnfExtCpConfig" structures that provide configuration information for a CP which represents a sub-port in a trunk, and if parent ports are supported. $ref: "#/definitions/IdentifierInVnf" cpInstanceId: description: > Identifier of the external CP instance to which this set of configuration parameters is requested to be applied. Shall be present if this instance has already been created. $ref: "#/definitions/IdentifierInVnf" linkPortId: description: > Identifier of a pre-configured link port to which the external CP will be associated. The following conditions apply to the attributes "linkPortId" and "cpProtocolData": 1) The "linkPortId" and "cpProtocolData" attributes shall both be absent for the deletion of an existing external CP instance addressed by cpInstanceId. 2) At least one of these attributes shall be present for a to-be-created external CP instance or an existing external CP instance. 3) If the "linkPortId" attribute is absent, the VNFM shall create a link port. 4) If the "cpProtocolData" attribute is absent, the "linkPortId" attribute shall be provided referencing a pre-created link port, and the VNFM can use means outside the scope of the present document to obtain the pre-configured address information for the connection point from the resource representing the link port. 5) If both "cpProtocolData" and "linkportId" are provided, the API consumer shall ensure that the cpProtocolData can be used with the pre-created link port referenced by "linkPortId". $ref: "#/definitions/Identifier" cpProtocolData: description: > Parameters for configuring the network protocols on the link port that connects the CP to a VL. The following conditions apply to the attributes "linkPortId" and "cpProtocolData": 1) The "linkPortId" and "cpProtocolData" attributes shall both be absent for the deletion of an existing external CP instance addressed by cpInstanceId. 2) At least one of these attributes shall be present for a to-be-created external CP instance or an existing external CP instance. 3) If the "linkPortId" attribute is absent, the VNFM shall create a link port. 4) If the "cpProtocolData" attribute is absent, the "linkPortId" attribute shall be provided referencing a pre-created link port, and the VNFM can use means outside the scope of the present document to obtain the pre-configured address information for the connection point from the resource representing the link port. 5) If both "cpProtocolData" and "linkportId" are provided, the API consumer shall ensure that the cpProtocolData can be used with the pre-created link port referenced by "linkPortId". type: array items: $ref: "#/definitions/CpProtocolData" CpProtocolData: description: > This type represents network protocol data. type: object required: - layerProtocol properties: layerProtocol: description: > Identifier of layer(s) and protocol(s). This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported. type: string enum: - IP_OVER_ETHERNET ipOverEthernet: description: > Network address data for IP over Ethernet to assign to the extCP instance. Shall be present if layerProtocol is equal to "IP_OVER_ETHERNET", and shall be absent otherwise. $ref: "#/definitions/IpOverEthernetAddressData" IpOverEthernetAddressData: description: > This type represents network address data for IP over Ethernet. type: object anyOf: - required: - macAddress - required: - ipAddresses oneOf: - required: - fixedAddresses - required: - numDynamicAddresses - required: - ipAddressRange properties: macAddress: description: > MAC address. If this attribute is not present, it shall be chosen by the VIM. At least one of "macAddress" or "ipAddresses" shall be present. $ref: "#/definitions/MacAddress" segmentationId: description: > Identification of the network segment to which the Cp instance connects to. If the Cp instance represents a subport in a trunk, segmentationId shall be present. Otherwise it shall not be present. Depending on the NFVI networking infrastructure, the segmentationId may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local segmentationId to whatever segmentationId is actually used by the NFVI’s transport technology. type: string ipAddresses: description: > List of IP addresses to assign to the CP instance. Each entry represents IP address data for fixed or dynamic IP address assignment per subnet. If this attribute is not present, no IP address shall be assigned. type: array items: type: object required: - type properties: type: description: > The type of the IP addresses. Permitted values: IPV4, IPV6. type: string enum: - IPV4 - IPV6 fixedAddresses: description: > Fixed addresses to assign (from the subnet defined by "subnetId" if provided). Exactly one of "fixedAddresses", "numDynamicAddresses" or "ipAddressRange" shall be present. type: array items: $ref: "#/definitions/IpAddress" numDynamicAddresses: description: > Number of dynamic addresses to assign (from the subnet defined by "subnetId" if provided). Exactly one of "fixedAddresses", "numDynamicAddresses" or "ipAddressRange" shall be present. type: integer addressRange: description: > An IP address range to be used, e.g. in case of egress connections. In case this attribute is present, IP addresses from the range will be used. type: object required: - minAddress - maxAddress properties: minAddress: description: > Lowest IP address belonging to the range. $ref: "#/definitions/IpAddress" maxAddress: description: > Highest IP address belonging to the range. $ref: "#/definitions/IpAddress" subnetId: description: > Subnet defined by the identifier of the subnet resource in the VIM. In case this attribute is present, IP addresses from that subnet will be assigned; otherwise, IP addresses not bound to a subnet will be assigned. $ref: "#/definitions/IdentifierInVim" ExtVirtualLinkData: description: > This type represents an external VL. type: object required: - id - resourceId - extCps properties: id: description: > The identifier of the external VL instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "#/definitions/Identifier" vimConnectionId: description: > Identifier of the VIM connection to manage this resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. $ref: "#/definitions/Identifier" resourceProviderId: description: > Identifies the entity responsible for the management of this resource. This attribute shall only be supported and present if VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "#/definitions/Identifier" resourceId: description: > The identifier of the resource in the scope of the VIM or the resource provider. $ref: "#/definitions/IdentifierInVim" extCps: description: > External CPs of the VNF to be connected to this external VL. type: array items: $ref: "#/definitions/VnfExtCpData" extLinkPorts: description: > Externally provided link ports to be used to connect external connection points to this external VL. If this attribute is not present, the VNFM shall create the link ports on the external VL. type: array items: $ref: "#/definitions/ExtLinkPortData" ExtManagedVirtualLinkData: type: object required: - id - virtualLinkDescId - resourceId properties: id: description: > The identifier of the externally-managed internal VL instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "#/definitions/Identifier" vnfVirtualLinkDescId: description: > The identifier of the VLD in the VNFD for this VL. $ref: "#/definitions/IdentifierInVnfd" vimConnectionId: description: > Identifier of the VIM connection to manage this resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. $ref: "#/definitions/Identifier" resourceProviderId: description: > Identifies the entity responsible for the management of this resource. This attribute shall only be supported and present if VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "#/definitions/Identifier" resourceId: description: > The identifier of the resource in the scope of the VIM or the resource provider. $ref: "#/definitions/IdentifierInVim" Identifier: description: > An identifier with the intention of being globally unique. type: string DateTime: description: > Date-time stamp. Representation: String formatted according to IETF RFC 3339. type: string format: date-time Uri: description: > String formatted according to IETF RFC 3986. type: string Boolean: description: > The Boolean is a data type having two values (true and false). type: boolean MacAddress: description: > A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons. type: string format: MAC IpAddress: description: > An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons. type: string format: IP Version: description: > A version. type: string String: description: > A string defined in IETF RFC 8259. type: string Number: description: > A number defined in IETF RFC 8259. type: number IdentifierInVnfd: description: > An identifier that is unique within a VNF descriptor. type: string IdentifierInVim: description: > An identifier maintained by the VIM or other resource provider. It is expected to be unique within the VIM instance. type: string IdentifierInVnf: description: > An identifier that is unique for the respective type within a VNF instance, but may not be globally unique. type: string IdentifierLocal: description: > An identifier that is unique within a limited local scope other than above listed identifiers, such as within a complex data structure or within a request-response pair. Representation: string of variable length. type: string ######################################################################################################################## # TO CHECK IF INCLUDE THESE DATA TYPES IN ANOTHER DEF FILES ExtLinkPortData: description: > This type represents an externally provided link port to be used to connect an external connection point to an external VL. type: object required: - id - resourceHandle properties: id: description: > Identifier of this link port as provided by the entity that has created the link port. $ref: "#/definitions/Identifier" resourceHandle: description: > Reference to the virtualised resource realizing this link port. $ref: "#/definitions/ResourceHandle" GrantedLcmOperationType: description: > The enumeration GrantedLcmOperationType defines the permitted values to represent VNF lifecycle operation types in grant requests. Value | Description ------|------------ INSTANTIATE | Represents the "Instantiate VNF" LCM operation. SCALE | Represents the "Scale VNF" LCM operation. SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation. CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation. TERMINATE | Represents the "Terminate VNF" LCM operation. HEAL | Represents the "Heal VNF" LCM operation. OPERATE | Represents the "Operate VNF" LCM operation. CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation. type: string enum: - INSTANTIATE - SCALE - SCALE_TO_LEVEL - CHANGE_FLAVOUR - TERMINATE - HEAL - OPERATE - CHANGE_EXT_CONN LcmOperationType: description: > Value | Description ------|------------ INSTANTIATE | Represents the "Instantiate VNF" LCM operation. SCALE | Represents the "Scale VNF" LCM operation. SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation. CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation. TERMINATE | Represents the "Terminate VNF" LCM operation. HEAL | Represents the "Heal VNF" LCM operation. OPERATE | Represents the "Operate VNF" LCM operation. CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation. MODIFY_INFO | Represents the "Modify VNF Information" LCM operation. CREATE_SNAPSHOT | Represents the "Create VNF Snapshot" LCM operation. REVERT_TO_SNAPSHOT | Represents the “Revert-To VNF Snapshot" LCM operation. CHANGE_VNFPKG | Represents the "Change current VNF package" LCM operation. type: string enum: - INSTANTIATE - SCALE - SCALE_TO_LEVEL - CHANGE_FLAVOUR - TERMINATE - HEAL - OPERATE - CHANGE_EXT_CONN - MODIFY_INFO - CREATE_SNAPSHOT - REVERT_TO_SNAPSHOT - CHANGE_VNFPKG ProblemDetails: #SOL003 location: 4.3.5.3 description: > The definition of the general "ProblemDetails" data structure from IETF RFC 7807 [19] is reproduced inthis structure. Compared to the general framework defined in IETF RFC 7807 [19], the "status" and "detail" attributes are mandated to be included by the present document, to ensure that the response contains additional textual information about an error. IETF RFC 7807 [19] foresees extensibility of the "ProblemDetails" type. It is possible that particular APIs in the present document, or particular implementations, define extensions to define additional attributes that provide more information about the error. The description column only provides some explanation of the meaning to Facilitate understanding of the design. For a full description, see IETF RFC 7807 [19]. type: object required: - status - detail properties: type: description: > A URI reference according to IETF RFC 3986 [5] that identifies the problem type. It is encouraged that the URI provides human-readable documentation for the problem (e.g. using HTML) when dereferenced. When this member is not present, its value is assumed to be "about:blank". type: string format: URI title: description: > A short, human-readable summary of the problem type. It should not change from occurrence to occurrence of the problem, except for purposes of localization. If type is given and other than "about:blank", this attribute shall also be provided. A short, human-readable summary of the problem type. It SHOULD NOT change from occurrence to occurrence of the problem, except for purposes of localization (e.g., using proactive content negotiation; see [RFC7231], Section 3.4). type: string status: description: > The HTTP status code for this occurrence of the problem. The HTTP status code ([RFC7231], Section 6) generated by the origin server for this occurrence of the problem. type: integer detail: description: > A human-readable explanation specific to this occurrence of the problem. type: string instance: description: > A URI reference that identifies the specific occurrence of the problem. It may yield further information if dereferenced. type: string format: URI #TODO: How to express "any additional attributes"? SubscriptionAuthentication: type: object required: - authType properties: authType: description: > Defines the types of Authentication / Authorization which the API consumer is willing to accept when receiving a notification. Permitted values: * BASIC: In every HTTP request to the notification endpoint, use HTTP Basic authentication with the client credentials. * OAUTH2_CLIENT_CREDENTIALS: In every HTTP request to the notification endpoint, use an OAuth 2.0 Bearer token, obtained using the client credentials grant type. * TLS_CERT: Every HTTP request to the notification endpoint is sent over a mutually authenticated TLS session, i.e. not only the server is authenticated, but also the client is authenticated during the TLS tunnel setup. type: array items: type: string enum: - BASIC - OAUTH2_CLIENT_CREDENTIALS - TLS_CERT paramsBasic: description: > Parameters for authentication/authorization using BASIC. Shall be present if authType is "BASIC" and the contained information has not been provisioned out of band. Shall be absent otherwise. type: object properties: userName: description: > Username to be used in HTTP Basic authentication. Shall be present if it has not been provisioned out of band. type: string password: description: > Password to be used in HTTP Basic authentication. Shall be present if it has not been provisioned out of band. type: string paramsOauth2ClientCredentials: description: > Parameters for authentication/authorization using OAUTH2_CLIENT_CREDENTIALS. Shall be present if authType is "OAUTH2_CLIENT_CREDENTIALS" and the contained information has not been provisioned out of band. Shall be absent otherwise. type: object properties: clientId: description: > Client identifier to be used in the access token request of the OAuth 2.0 client credentials grant type. Shall be present if it has not been provisioned out of band. The clientId and clientPassword passed in a subscription shall not be the same as the clientId and clientPassword that are used to obtain authorization for API requests. Client credentials may differ between subscriptions. The value of clientPassword should be generated by a random process. type: string clientPassword: description: > Client password to be used in the access token request of the OAuth 2.0 client credentials grant type. Shall be present if it has not been provisioned out of band. The clientId and clientPassword passed in a subscription shall not be the same as the clientId and clientPassword that are used to obtain authorization for API requests. Client credentials may differ between subscriptions. The value of clientPassword should be generated by a random process. type: string tokenEndpoint: description: > The token endpoint from which the access token can be obtained. Shall be present if it has not been provisioned out of band. $ref: "#/definitions/Uri" AffectedVnfc: description: > This type provides information about added, deleted, modified and temporary VNFCs. type: object required: - id - vduId - changeType - computeResource properties: id: description: > Identifier of the Vnfc instance, identifying the applicable "vnfcResourceInfo" entry in the "VnfInstance" data type. $ref: "#/definitions/IdentifierInVnf" vduId: description: > Identifier of the related VDU in the VNFD. $ref: "#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case of a "change current VNF Package" to identify whether the affected VNFC instance is associated to a VDU which is referred from the source or destination VNFD. $ref: "#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: * ADDED * REMOVED * MODIFIED * TEMPORARY For a temporary resource, an AffectedVnfc structure exists as long as the temporary resource exists. type: string enum: - ADDED - REMOVED - MODIFIED - TEMPORARY computeResource: description: > Reference to the VirtualCompute resource. Detailed information is (for new and modified resources) or has been (for removed resources) available from the VIM. $ref: "#/definitions/ResourceHandle" resourceDefinitionId: description: > The identifier of the "ResourceDefinition" in the granting exchange related to the LCM operation occurrence. It shall be present when an applicable GrantInfo for thegranted resource exists. See note. $ref: "#/definitions/IdentifierLocal" zoneId: description: > The identifier of the resource zone, as managed by the resource management layer (typically, the VIM), where the referenced VirtualCompute resource is placed. Shall be provided if this information is available from the VIM. $ref: "#/definitions/Identifier" metadata: description: > Metadata about this resource. The content of this attribute shall be a copy of the content of the "metadata" attribute of the VnfcResourceInfo structure. $ref: "#/definitions/KeyValuePairs" affectedVnfcCpIds: description: > Identifiers of CP(s) of the VNFC instance that were affected by the change. Shall be present for those affected CPs of the VNFC instance that are associated to an external CP of the VNF instance. May be present for further affected CPs of the VNFC instance. type: array items: $ref: "#/definitions/IdentifierInVnf" addedStorageResourceIds: description: > References to VirtualStorage resources that have been added. Each value refers to a VirtualStorageResourceInfo item in the VnfInstance that was added to the VNFC. It shall be provided if at least one storage resource was added to the VNFC. type: array items: $ref: "#/definitions/IdentifierInVnf" removedStorageResourceIds: description: > References to VirtualStorage resources that have been removed. The value contains the identifier of a VirtualStorageResourceInfo item that has been removed from the VNFC, and might no longer exist in the VnfInstance. It shall be provided if at least one storage resource was removed from the VNFC. type: array items: $ref: "#/definitions/IdentifierInVnf"