# Copyright (c) ETSI 2017. # https://forge.etsi.org/etsi-forge-copyright-notice.txt definitions: VnfInstance: description: > This type represents a VNF instance. * NOTE: Clause B.3.2 provides examples illustrating the relationship among the different run-time data types (CP, VL and link ports) used to represent the connectivity of a VNF. * NOTE 1: Modifying the value of this attribute shall not be performed when conflicts exist between the previous and the newly referred VNF package, i.e. when the new VNFD is changed with respect to the previous VNFD in other aspects than merely referencing to other VNF software images. In order to avoid misalignment of the VnfInstance with the current VNF's on-boarded VNF package, the values of attributes in the VnfInstance that have corresponding attributes in the VNFD shall be kept in sync with the values in the VNFD. * NOTE 2: ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD based on TOSCA specifications. * NOTE 3: VNF configurable properties are sometimes also referred to as configuration parameters applicable to a VNF. Some of these are set prior to instantiation and cannot be modified if the VNF is instantiated, some are set prior to instantiation (are part of initial configuration) and can be modified later, and others can be set only after instantiation. The applicability of certain configuration may depend on the VNF and the required operation of the VNF at a certain point in time. * NOTE 4: Upon creation of the VnfInstance structure, the VNFM shall create and initialize all child attributes of "vnfConfigurableProperties", "metadata" and "extensions" that were declared in the VNFD with a defined initial value. The defined initial values can be declared in the VNFD, and/or, in case of "metadata", obtained from the "CreateVnfRequest" structure. Child attributes of "vnfConfigurableProperties", "metadata" and "extensions" that have no defined initial value shall not be created, in order to be consistent with the semantics of the JSON Merge Patch method (see IETF RFC 7396) that interprets null values as deletion request. * NOTE 5: It is possible to have several ExtManagedVirtualLinkInfo for the same VNF internal VL in case of a multi-site VNF spanning several VIMs. The set of ExtManagedVirtualLinkInfo corresponding to the same VNF internal VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed multi-site VL instance (refer to clause 5.5.3.5). * NOTE 6: Even though externally-managed internal VLs are also used for VNF-internal connectivity, they shall not be listed in the "vnfVirtualLinkResourceInfo" attribute as this would be redundant. type: object required: - id - vnfdId - vnfProvider - vnfProductName - vnfSoftwareVersion - vnfdVersion - instantiationState - _links properties: id: description: > Identifier of the VNF instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfInstanceName: description: > Name of the VNF instance. This attribute can be modified with the PATCH method. type: string vnfInstanceDescription: description: > Human-readable description of the VNF instance. This attribute can be modified with the PATCH method. type: string vnfdId: description: > Identifier of the VNFD on which the VNF instance is based. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfProvider: description: > Provider of the VNF and the VNFD. The value is copied from the VNFD. type: string vnfProductName: description: > Name to identify the VNF Product. The value is copied from the VNFD. type: string vnfSoftwareVersion: description: > Software version of the VNF. The value is copied from the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" vnfdVersion: description: > Identifies the version of the VNFD. The value is copied from the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" vnfConfigurableProperties: description: > Additional VNF-specific attributes that provide the current values of the configurable properties of the VNF instance. These attributes represent values that are stored persistently in the VnfInstance structure and that correspond to configuration parameters of the VNF instance. Modifying these attributes affects the configuration of the VNF instance either directly (if the VNF instance is in INSTANTIATED state at the time of the modification) or as part of the subsequent VNF instantiation operation (if the VNF instance is in NOT_INSTANTIATED state at the time of the modification). Configurable properties referred in these attributes shall be declared in the VNFD. The declaration of configurable properties in the VNFD can optionally contain the specification of initial values. See note 2, note 3 and note 4. The VNFM shall reject requests to write configurable properties that are not declared in the VNFD with a "422 Unprocessable Content" error response as defined in clause 6.4 of ETSI GS NFV SOL 013. These configurable properties include the following standard attributes, which are declared in the VNFD if auto-scaling and/or auto-healing are supported by the VNF: - isAutoscaleEnabled: If present, the VNF supports auto-scaling. If set to true, auto-scaling is currently enabled. If set to false, auto-scaling is currently disabled. - isAutohealEnabled: If present, the VNF supports auto-healing. If set to true, auto-healing is currently enabled. If set to false, auto-healing is currently disabled. These configurable properties can be initialized with default values from the VNFD (see note 4). Configurable properties can be modified with values passed in the request structures of certain LCM operations, such as the InstantiateVnfRequest structure. Further, these configurable properties can be created, modified or deleted with the PATCH method. In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" instantiationState: description: > The instantiation state of the VNF. type: string enum: - NOT_INSTANTIATED - INSTANTIATED instantiatedVnfInfo: description: > Information specific to an instantiated VNF instance. This attribute shall be present if the instantiateState attribute value is INSTANTIATED. type: object required: - flavourId - vnfState - extCpInfo properties: flavourId: description: > Identifier of the VNF deployment flavour applied to this VNF instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfState: description: > The state of the VNF instance. $ref: "#/definitions/VnfOperationalStateType" scaleStatus: description: > Scale status of the VNF, one entry per aspect. Represents for every scaling aspect how "big" the VNF has been scaled w.r.t. that aspect. This attribute shall be present if the VNF supports scaling. See clause B.2 for an explanation of VNF scaling. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ScaleInfo" maxScaleLevels: description: > Maximum allowed scale levels of the VNF, one entry per aspect. This attribute shall be present if the VNF supports scaling. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ScaleInfo" extCpInfo: description: > Information about the external CPs exposed by the VNF instance. When trunking is enabled, the list of entries includes both, external CPs corresponding to parent ports of a trunk, and external CPs associated to sub-ports of a trunk. type: array minItems: 1 items: $ref: "#/definitions/VnfExtCpInfo" vipCpInfo: description: > VIP CPs that are part of the VNF instance. Shall be present when that particular VIP CP of the VNFC instance is associated to an external CP of the VNF instance. May be present otherwise. type: array items: $ref: "#/definitions/VipCpInfo" extVirtualLinkInfo: description: > Information about the external VLs the VNF instance is connected to. type: array items: $ref: "#/definitions/ExtVirtualLinkInfo" extManagedVirtualLinkInfo: description: > Information about the externally managed internal VLs of the VNF instance. See note 5 and note 6. It is possible to have several ExtManagedVirtualLinkInfo for the same VNF internal VL in case of a multi-site VNF spanning several VIMs. The set of ExtManagedVirtualLinkInfo corresponding to the same VNF internal VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed multi-site VL instance (refer to clause 5.5.3.5). Even though externally-managed internal VLs are also used for VNF-internal connectivity, they shall not be listed in the "vnfVirtualLinkResourceInfo" attribute as this would be redundant. type: array items: $ref: "#/definitions/ExtManagedVirtualLinkInfo" monitoringParameters: description: > Active monitoring parameters. type: array items: $ref: "#/definitions/MonitoringParameter" localizationLanguage: description: > Information about localization language of the VNF (includes e.g. strings in the VNFD). The localization languages supported by a VNF can be declared in the VNFD, and localization language selection can take place at instantiation time. The value shall comply with the format defined in IETF RFC 5646. type: string vnfcResourceInfo: description: > Information about the virtualised compute and storage resources used by the VNFCs of the VNF instance. type: array items: $ref: "#/definitions/VnfcResourceInfo" vnfVirtualLinkResourceInfo: description: > Information about the virtualised network resources used by the VLs of the VNF instance. See note 6. Even though externally-managed internal VLs are also used for VNF-internal connectivity, they shall not be listed in the "vnfVirtualLinkResourceInfo" attribute as this would be redundant. type: array items: $ref: "#/definitions/VnfVirtualLinkResourceInfo" vnfVirtualStorageResourceInfo: description: > Information on the virtualised storage resource(s) used as storage for the VNF instance. type: array items: $ref: "#/definitions/VirtualStorageResourceInfo" vnfcInfo: description: > Information about the VNFC instances. type: array items: $ref: "#/definitions/VnfcInfo" metadata: description: > Additional VNF-specific attributes that provide metadata describing the VNF instance. These attributes represent values that are stored persistently in the VnfInstance structure for consumption by functional blocks that invoke the VNF lifecycle management interface. They are not consumed by the VNFM, or the lifecycle management scripts. Modifying the values of these attributes has no effect on the VNF instance, it only affects the information represented in the VnfInstance structure. Metadata that VNF provider foresees shall be declared in the VNFD. The declaration of metadata in the VNFD can optionally contain the specification of initial values. See note 2 and note 4. The VNFM shall accept requests to write metadata that are not are declared in the VNFD. These attributes can be initialized with default values from VNFD (see note 4) and/or with values passed in the CreateVnfRequest structure (see clause 5.5.2.3). These attributes can be created, modified or removed with the PATCH method. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > Additional VNF specific attributes that affect the lifecycle management of this VNF instance. These attributes represent values that are stored persistently in the VnfInstance structure for consumption by the VNFM, or by the lifecycle management scripts during the execution of VNF lifecycle management operations. All extensions that are allowed for the VNF are declared in the VNFD. The declaration of an extension in the VNFD contains information on whether its presence is optional or required, and optionally can specify an initial value. See note 2 and note 4. The VNFM shall reject requests to write extension attributes that are not declared in the VNFD with a "422 Unprocessable Content" error response as defined in clause 6.4 of ETSI GS NFV SOL 013. Modifying the values of these attributes has no direct effect on the VNF instance; however, the modified attribute values can be considered during subsequent VNF lifecycle management operations, which means that the modified values can indirectly affect the configuration of the VNF instance. These attributes can be initialized with default values from the VNFD (see note 4). These attributes can be modified with values passed in the request structures of certain LCM operations, such as the InstantiateVnfRequest structure. Further, these attributes can be created, modified or deleted with the PATCH method. In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" _links: description: > Links to resources related to this resource. type: object required: - self properties: self: description: URI of this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" indicators: description: Indicators related to this VNF instance, if applicable. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" instantiate: description: > Link to the "Instantiate VNF task" resource, if the related operation is possible based on the current status of this VNF instance resource (i.e. VNF instance in NOT_INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" terminate: description: > Link to the "Terminate VNF task" resource, if the related operation is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" scale: description: > Link to the "Scale VNF task" resource, if the related operation is supported for this VNF instance, and is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" scaleToLevel: description: > Link to the "Scale VNF to Level task" resource, if the related operation is supported for this VNF instance, and is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" changeFlavour: description: > Link to the "Change VNF flavour task" resource, if the related operation is supported for this VNF instance, and is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" heal: description: > Link to the "Heal VNF task" resource, if the related operation is supported for this VNF instance, and is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" operate: description: > Link to the "Operate VNF task" resource, if the related operation is supported for this VNF instance, and is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" changeExtConn: description: > Link to the "Change external VNF connectivity task" resource, if the related operation is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" createSnapshot: description: > Link to the "Create VNF snapshot task" resource, if the related operation is supported for this VNF instance and is possible based on the current status of this VNF instance resource (i.e., VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" revertToSnapshot: description: > Link to the "Revert to VNF snapshot task" resource, if the related operation is supported for this VNF instance and is possible based on the current status of this VNF instance resource (i.e., VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" changeCurrentVnfPkg: description: > Link to the "Change current VNF package task" resource, if the related operation is possible based on the current status of this VNF instance resource (i.e. VNF instance is in INSTANTIATED state). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" InstantiateVnfRequest: description: > This type represents request parameters for the "Instantiate VNF" operation. * NOTE: The indication of externally-managed internal VLs is needed in case networks have been pre-configured for use with certain VNFs, for instance to ensure that these networks have certain properties such as security or acceleration features, or to address particular network topologies. The present document assumes that externally-managed internal VLs are managed by the NFVO and created towards the VIM. type: object required: - flavourId properties: flavourId: description: > Identifier of the VNF deployment flavour to be instantiated. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" instantiationLevelId: description: > Identifier of the instantiation level of the deployment flavour to be instantiated. If not present, the default instantiation level as declared in the VNFD is instantiated. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" extVirtualLinks: description: > Information about external VLs to connect the VNF to, including configuration information for the CPs via which the VNF instance can attach to this VL. The following applies to the "ExtVirtualLinkData" information provided in this request: Even if the VNF is not instantiated in fully scaled-out state, the API consumer shall provide enough CP configuration records to allow connecting the VNF instance, fully scaled out in all scaling aspects, to the external VLs. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ExtVirtualLinkData" extManagedVirtualLinks: description: > Information about external VLs to connect the VNF to. See note. type: array items: $ref: "#/definitions/ExtManagedVirtualLinkData" localizationLanguage: description: > Localization language of the VNF to be instantiated. The value shall comply with the format defined in IETF RFC 5646. type: string additionalParams: description: > Additional input parameters for the instantiation process, specific to the VNF being instantiated, as declared in the VNFD as part of "InstantiateVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > If present, this attribute provides modifications to the default values, as obtained from the VNFD, of the "extensions" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling extensions during the operation are defined in clause 5.4.4.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfConfigurableProperties: description: > If present, this attribute provides modifications to the default values, as obtained from the VNFD, of the "vnfConfigurableProperties" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling configurable properties during the operation are defined in clause 5.4.4.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ChangeVnfFlavourRequest: description: > This type represents request parameters for the "Change VNF flavour" operation. * NOTE: The indication of externally-managed internal VLs is needed in case networks have been pre-configured for use with certain VNFs, for instance to ensure that these networks have certain properties such as security or acceleration features, or to address particular network topologies. The present document assumes that externally-managed internal VLs are managed by the NFVO and created towards the VIM. type: object required: - newFlavourId properties: newFlavourId: description: > Identifier of the VNF deployment flavour to be instantiated. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" instantiationLevelId: description: > Identifier of the instantiation level of the deployment flavour to be instantiated. If not present, the default instantiation level as declared in the VNFD is instantiated. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" extVirtualLinks: description: > Information about external VLs to connect the VNF to, including configuration information for the CPs via which the VNF instance can attach to this VL. Entries in the list of external VLs that are unchanged need not be supplied as part of this request. The following applies to the "ExtVirtualLinkData" information provided in this request, together with the related "ExtVirtualLinkInfo" information known to the VNFM represented in the "VnfInstance" structure (see clause 5.5.2.2): Even if the VNF is not in fully scaled-out state after changing the flavour, the API consumer shall provide enough CP configuration records to allow connecting the VNF instance, fully scaled out in all scaling aspects, to the external VLs. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ExtVirtualLinkData" extManagedVirtualLinks: description: > Information about external VLs to connect the VNF to. See note. type: array items: $ref: "#/definitions/ExtManagedVirtualLinkData" additionalParams: description: > Additional input parameters for the flavour change process, specific to the VNF being modified, as declared in the VNFD as part of "ChangeVnfFlavourOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > If present, this attribute provides modifications to the values of the "extensions" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling extensions during the operation, are defined in clause 5.4.7.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfConfigurableProperties: description: > If present, this attribute provides modifications to the values of the “vnfConfigurableProperties” attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling VNF configurable properties during the operation, are defined in clause 5.4.7.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" TerminateVnfRequest: description: > This type represents request parameters for the "Terminate VNF" operation. * NOTE: In case of forceful termination, the VNF instance is terminated immediately. If the VNF is still in service, this can adversely impact the network service, and therefore, the EM needs to determine if forceful termination is applicable in the particular situation. type: object required: - terminationType properties: terminationType: description: > Indicates the type of termination is requested. See note. Permitted values: * FORCEFUL: The VNFM will shut down the VNF and release the resources immediately after accepting the request. * GRACEFUL: The VNFM will first arrange to take the VNF out of service after accepting the request. Once the operation of taking the VNF out of service finishes (irrespective of whether it has succeeded or failed) or once the timer value specified in the "gracefulTerminationTimeout" attribute expires, the VNFM will shut down the VNF and release the resources. type: string enum: - FORCEFUL - GRACEFUL gracefulTerminationTimeout: description: > This attribute is only applicable in case of graceful termination. It defines the time to wait for the VNF to be taken out of service before shutting down the VNF and releasing the resources. The unit is seconds. If not given and the "terminationType" attribute is set to "GRACEFUL", it is expected that the VNFM waits for the successful taking out of service of the VNF, no matter how long it takes, before shutting down the VNF and releasing the resources. type: integer additionalParams: description: > Additional parameters passed by the EM as input to the termination process, specific to the VNF being terminated, as declared in the VNFD as part of "TerminateVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" HealVnfRequest: type: object properties: vnfcInstanceId: description: > List of identifiers of VNFC instances for which a healing action is requested. Each identifier references the "id" attribute in a "VnfcInfo" structure. Cardinality can be "0" to denote that the request applies to the whole VNF and not a specific VNFC instance. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" cause: description: > Indicates the reason why a healing procedure is required. type: string additionalParams: description: > Additional parameters passed by the EM as input to the healing process, specific to the VNF being healed as declared in the VNFD as part of "HealVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" healScript: description: > Provides link to a script that should be executed as part of the healing action or a set of rules for healing procedure. type: string OperateVnfRequest: description: > This type represents request parameters for the "Operate VNF" operation. * NOTE: The "stopType" and "gracefulStopTimeout" attributes shall be absent, when the "changeStateTo" attribute is equal to "STARTED". The "gracefulStopTimeout" attribute shall be present, when the "changeStateTo" is equal to "STOPPED" and the "stopType" attribute is equal to "GRACEFUL". The "gracefulStopTimeout" attribute shall be absent, when the "changeStateTo" attribute is equal to "STOPPED" and the "stopType" attribute is equal to "FORCEFUL". The request shall be treated as if the "stopType" attribute has been set to "FORCEFUL", when the "changeStateTo" attribute is equal to "STOPPED" and the "stopType" attribute is absent. type: object required: - changeStateTo properties: vnfcInstanceId: description: > List of identifiers of VNFC instances. Each identifier references the "id" attribute in a "VnfcInfo" structure. Cardinality can be "0" to denote that the request applies to the whole VNF and not a specific VNFC instance. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeStateTo: description: > The desired operational state (i.e. started or stopped) to change the VNF to. $ref: "#/definitions/VnfOperationalStateType" stopType: description: > It signals whether forceful or graceful stop is requested. See note type: string enum: - FORCEFUL - GRACEFUL gracefulStopTimeout: description: > The time interval (in seconds) to wait for the VNF to be taken out of service during graceful stop, before stopping the VNF. See note. type: integer additionalParams: description: > Additional parameters passed by the EM as input to the process, specific to the VNF of which the operation status is changed, as declared in the VNFD as part of "OperateVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ChangeExtVnfConnectivityRequest: description: > This type represents request parameters for the "Change external VNF connectivity" operation to modify the external connectivity of a VNF instance. type: object required: - extVirtualLinks properties: extVirtualLinks: description: > Information about external VLs to change (e.g. connect the VNF to) including configuration information for the CPs via which the VNF instance can attach to this VL. Entries in the list of external VLs that are unchanged need not be supplied as part of this request. The following applies to the "ExtVirtualLinkData" information provided in this request, together with the related "ExtVirtualLinkInfo" information known to the VNFM represented in the "VnfInstance" structure (see clause 5.5.2.2): Even if the VNF is not in fully scaled-out state, the API consumer shall provide enough CP configuration records to allow connecting the VNF instance, fully scaled out in all scaling aspects, to the external VLs. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ExtVirtualLinkData" additionalParams: description: > Additional parameters passed by the EM as input to the process, specific to the VNF of which the external connectivity is changed, as declared in the VNFD as part of "ChangeExtVnfConnectivityOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ChangeCurrentVnfPkgRequest: description: > This type represents request parameters for the "Change current VNF package" operation to replace the VNF package on which a VNF instance is based. * NOTE: The indication of externally-managed internal VLs is needed in case networks have been pre-configured for use with certain VNFs, for instance to ensure that these networks have certain properties such as security or acceleration features, or to address particular network topologies. The present document assumes that externally-managed internal VLs are managed by the NFVO and created towards the VIM. type: object required: - vnfdId properties: vnfdId: description: > Identifier of the VNFD which defines the destination VNF Package for the change. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" extVirtualLinks: description: > Information about external VLs to connect the VNF to, including configuration information for the CPs via which the VNF instance can attach to this VL. Entries in the list that are unchanged need not be supplied as part of this request. The following applies to the "ExtVirtualLinkData" information provided in this request, together with the related "ExtVirtualLinkInfo" information known to the VNFM represented in the "VnfInstance" structure (see clause 5.5.2.2): Even if the VNF is not in fully scaled-out state after the change of the VNF package, the API consumer shall provide enough CP configuration records to allow connecting the VNF instance, fully scaled out in all scaling aspects, to the external VLs. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ExtVirtualLinkData" extManagedVirtualLinks: description: > Information about internal VLs that are managed by other entities than the VNFM. See note. type: array items: $ref: "#/definitions/ExtManagedVirtualLinkData" additionalParams: description: > Additional parameters passed by the EM as input to the process, specific to the VNF of which the underlying VNF package is changed, as declared in the VNFD as part of "ChangeCurrentVnfPkgOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > If present, this attribute provides modifications to the values of the "extensions" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling extensions during the operation, and needed passed parameter values in case of conflicts, are defined in clause 5.4.11a.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfConfigurableProperties: description: > If present, this attribute provides modifications to the values of the “vnfConfigurableProperties” attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling VNF configurable properties during the operation, and needed passed parameter values in case of conflicts, are defined in clause 5.4.11a.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VnfInfoModificationRequest: description: > This type represents attribute modifications for an "Individual VNF instance" resource, i.e. modifications to a resource representation based on the "VnfInstance" data type. The attributes of "VnfInstance" that can be modified according to the provisions in clause 5.5.2.2 are included in the "VnfInfoModificationRequest" data type. type: object properties: vnfInstanceName: description: > New value of the "vnfInstanceName" attribute in "VnfInstance", or "null" to remove the attribute. type: string vnfInstanceDescription: description: > New value of the "vnfInstanceDescription" attribute in "VnfInstance", or "null" to remove the attribute. type: string vnfdId: description: > New value of the "vnfdId" attribute in "VnfInstance". The value "null" is not permitted. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfConfigurableProperties: description: > Modifications of the "vnfConfigurableProperties" attribute in "VnfInstance". If present, these modifications shall be applied according to the rules of JSON Merge PATCH (see IETF RFC 7396 [15]). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" metadata: description: > Modifications of the "metadattametadata" attribute in "VnfInstance". If present, these modifications shall be applied according to the rules of JSON Merge PATCH (see IETF RFC 7396 [15]). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > Modifications of the "extensions" attribute in "VnfInstance". If present, these modifications shall be applied according to the rules of JSON Merge PATCH (see IETF RFC 7396 [15]). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfcInfoModifications: description: > Modifications of certain entries in the "vnfcInfo" attribute array in the "instantiatedVnfInfo" attribute of "VnfInstance" to be used as "newList" as defined below this table. The following provisions shall apply when modifying an attribute that is an array of objects of type "VnfcInfo" by supplying an array of objects of type "VnfcInfoModifications". Assumptions: 1) "oldList" is the "VnfcInfo" array to be modified and "newList" is the "VnfcInfoModifications" array that contains the changes. 2) "oldEntry" is an entry in "oldList" and "newEntry" is an entry in "newList". 3) A "newEntry" has a "corresponding entry" if there exists an "oldEntry" that has the same content of the "id" attribute as the "newEntry"; a "newEntry" has no corresponding entry if no such "oldEntry" exists. 4) In any array of "VnfcInfo" resp. "VnfcInfoModifications" structures, the content of "id" is unique (i.e. there are no two entries with the same content of "id"). Provisions: 1) For each "newEntry" in "newList" that has no corresponding entry in "oldList", the "oldList" array shall be modified by adding that "newEntry". 2) For each "newEntry" in "newList" that has a corresponding "oldEntry" in "oldList", the value of "oldEntry" shall be updated with the content of "newEntry" as specified for the data type of "newEntry (refer to clause 5.5.3.24 for the data type "VnfcInfoModifications"). type: array items: $ref: "#/definitions/VnfcInfoModifications" CreateVnfSnapshotRequest: description: > This type represents request parameters for the "Create VNF Snapshot" LCM operation. type: object required: - vnfSnapshotResId properties: vnfSnapshotInfoId: description: > Identifier of the individual VNF snapshot resource to which the VNF Snapshot is to be associated. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfcInstanceId: description: > Identifier of the VNFC instance to be snapshotted. Each identifier references the "id" attribute in a "VnfcInfo" structure. If this attribute is provided, only a snapshot of the referred VNFC instance shall be created. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" additionalParams: description: > Additional input parameters for the snapshot creation process, specific for the VNF being “snapshotted”, as declared in the VNFD as part of "CreateSnapshotVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" userDefinedData: description: > User defined data for the VNF snapshot. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" RevertToVnfSnapshotRequest: description: > This type represents request parameters for the "Revert-to VNF Snapshot" operation. type: object properties: vnfSnapshotInfoId: description: > Identifier of the “individual VNF snapshot” resource with the information of the VNF snapshot to be reverted to. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfcInstanceId: description: > List of identifiers of the VNFC instance to be reverted. Each identifier references the "id" attribute in a "VnfcInfo" structure. Shall be present if the request is for reverting a specific VNFC instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfcSnapshotInfoId: description: > Identifier of the VNFC snapshot information with the information of the VNFC snapshot to be reverted to. Shall only be present if the "vnfcInstanceId" is present. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" additionalParams: description: > Additional input parameters for the revert to VNF snapshot process, specific for the VNF being “reverted”, as declared in the VNFD as part of “RevertToSnapshotVnfOpConfig” defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" CreateVnfSnapshotInfoRequest: description: | This type represents request parameters for the creation of an "Individual VNF snapshot" resource which can be populated with content obtained by invoking the "Create VNF snapshot" LCM operation or extracted from a VNF snapshot package. * NOTE: The present attribute shall be provided if the "Individual VNF snapshot" resource is requested to be created and be filled from a VNF snapshot package extraction. type: object properties: vnfSnapshotPkgId: description: | Identifier of the VNF snapshot package information held by the NFVO. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" VnfSnapshotInfo: description: > This type represents an individual VNF snapshot resource. type: object required: - id properties: id: description: > Identifier of the individual VNF snapshot resource. This identifier is allocated by the VNFM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfSnapshotPkgId: description: | Identifier of the VNF snapshot package information held by the EM. Shall be present when the “Individual VNF snapshot" resource is created from a VNF snapshot package extraction. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfSnapshot: description: > Information about the VNF snapshot, content and/or references to its content. Shall be present when the individual VNF snapshot resource is associated to a VNF snapshot created via the corresponding "Create VNF snapshot" task resource or extracted from a VNF snapshot package. $ref: '#/definitions/VnfSnapshot' _links: description: > Links to resources related to this resource. type: object required: - self properties: self: description: > URI of this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" takenFrom: description: > Link to the VNF instance from which this snapshot was taken. Shall be present when the "Individual VNF snapshot" resource is associated to a VNF snapshot created via the corresponding "Create VNF snapshot" task resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" VnfSnapshot: description: > This type represents a VNF snapshot. type: object required: - id - vnfInstanceId - triggeredAt - vnfdId - vnfInfo - vnfcSnapshots properties: id: description: > Identifier of the VNF Snapshot. This identifier is allocated by the VNFM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfInstanceId: description: > Identifier of the snapshotted VNF instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" creationStartedAt: description: > Timestamp indicating when the VNF snapshot creation has been started by the VNFM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" creationFinishedAt: description: > Timestamp indicating when the VNF snapshot has been completed by the VNFM. Shall be present once the VNF snapshot creation has been completed. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" vnfdId: description: > Identifier of the VNFD in use at the time the snapshot of the VNF instance has been created. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfInstance: description: > VNF Instance information of the snapshotted VNF instance. This is a copy of the individual VNF instance resource. $ref: '#/definitions/VnfInstance' vnfcSnapshots: description: > Information about VNFC snapshots constituting this VNF snapshot. type: array items: $ref: '#/definitions/VnfcSnapshotInfo' userDefinedData: description: > User defined data for the VNF snapshot. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VnfcSnapshotInfo: description: > This type represents a VNFC snapshot. * NOTE 1: The identifier of the compute snapshot resource is assigned during creation of a VNFC snapshot being returned from the VIM as output data in the response message of the individual resource operations. This attribute shall only be present for a VNFC snapshot that has been newly created by the VNFM as a result of the "Create VNF snapshot task". NOTE 2: The identifier of the storage snapshot resource is assigned during creation of a VNFC snapshot being returned from the VIM as output data in the response message of the individual resource operations. This attribute shall only be present for a VNFC snapshot with an associated storage resource and that has been newly created by the VNFM as a result of the "Create VNF snapshot task". type: object required: - id - vnfcInstanceId - creationStartedAt - vnfcResourceInfoId properties: id: description: > Identifier of the information held by the VNFM about a specific VNFC snapshot. This identifier is allocated by the VNFM and is unique within the scope of a VNF snapshot. The attribute also identifies the compute snapshot image associated to this VNFC snapshot within the context of a referred VNF snapshot. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfcInstanceId: description: > Identifier of the snapshotted VNFC instance. The identifier references the "id" attribute in a "VnfcInfo" structure. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" creationStartedAt: description: > Timestamp indicating when the VNF snapshot creation has been started by the VNFM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" creationFinishedAt: description: > Timestamp indicating when the VNFC snapshot has been completed. Shall be present once the VNFC snapshot creation has been completed by the VNFM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" vnfcResourceInfoId: description: > Reference to the "VnfcResourceInfo" structure in the "VnfInstance" structure that represents the resources of the snapshotted VNFC instance. A snapshot of that structure is available in the "vnfInstance" attribute of the "VnfSnapshot" structure. $ref: "#/definitions/VnfcInfo" computeSnapshotResource: description: > Reference to a compute snapshot resource. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" storageSnapshotResources: description: > Mapping of the storage resources associated to the VNFC with the storage snapshot resources. type: object required: - storageResourceId properties: storageResourceId: description: > Reference to the "VirtualStorageResourceInfo" structure in the "VnfInstance" structure that represents the virtual storage resource. The attribute also identifies the storage snapshot image associated to this VNFC snapshot within the context of a referred VNF snapshot $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" storageSnapshotResource: description: > Reference to a storage snapshot resource. See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" userDefinedData: description: > User defined data for the VNF snapshot. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" StopType: description: > The enumeration StopType. * FORCEFUL: The VNFM will stop the VNF instance or VNFC instance(s) immediately after accepting the request. * GRACEFUL: The VNFM will first arrange to take the VNF instance or VNFC instance(s) out of service after accepting the request. Once that operation is successful or once the timer value specified in the "gracefulStopTimeout" attribute expires, the VNFM will stop the VNF instance or VNFC instance(s). type: string enum: - FORCEFUL - GRACEFUL ExtManagedVirtualLinkData: description: > This type represents an externally-managed internal VL. * NOTE: The information about the VIM connection referenced by the VIM connection id is known to the VNFM. Moreover, the identifier of the VIM connection provides scope to the resourceId. type: object required: - id - virtualLinkDescId - resourceId properties: id: description: > The identifier of the externally-managed internal VL instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfVirtualLinkDescId: description: > The identifier of the VLD in the VNFD for this VL. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vimConnectionId: description: > Identifier of the VIM connection to manage this resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" resourceProviderId: description: > Identifies the entity responsible for the management of this resource. This attribute shall only be supported and present if VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" resourceId: description: > The identifier of the resource in the scope of the VIM or the resource provider. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVim" ExtManagedVirtualLinkInfo: description: > This type represents an externally-managed internal VL. type: object required: - id - vnfVirtualLinkDescId - networkResource properties: id: description: > Identifier of the externally-managed internal VL and the related externally-managed VL information instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfVirtualLinkDescId: description: > Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" networkResource: description: > Reference to the VirtualNetwork resource providing this VL. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" vnfLinkPorts: description: > Link ports of this VL. type: array items: $ref: "#/definitions/VnfLinkPortInfo" VnfcResourceInfo: description: > This type represents the information on virtualised compute and storage resources used by a VNFC in a VNF instance. * NOTE 1: ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD based on TOSCA specifications. * NOTE 2: A VNFC CP is "connected to" an external CP if the VNFC CP is connected to an internal VL that exposes an external CP. A VNFC CP is "exposed as" an external CP if it is connected directly to an external VL. * NOTE 3: The information can be omitted because it is already available as part of the external CP information. * NOTE 4: If only the value or the presence of this attribute is changed in the "VnfcResourceInfo" structure by an LCM operation occurrence, this does not represent a change that requires including a related "AffectedVnfc" structure in the VNF LCM operation occurrence notifications or the "VnfLcmOpOcc" structure related to this LCM operation occurrence. type: object required: - id - vduId - computeResource properties: id: description: > Identifier of this VnfcResourceInfo instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vduId: description: > Reference to the applicable VDU in the VNFD. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). See note 4. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" computeResource: description: > Reference to the VirtualCompute resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" storageResourceIds: description: > References to the VirtualStorage resources. The value refers to a VirtualStorageResourceInfo item in the VnfInstance. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" reservationId: description: > The reservation identifier applicable to the resource. It shall be present when an applicable reservation exists. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfcCpInfo: description: > All the CPs of the VNFC instance. type: array items: type: object required: - id - cpdId properties: id: description: > Identifier of this VNFC CP instance and the associated array entry. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpdId: description: > Identifier of the VDU CPD, cpdId, in the VNFD. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfExtCpId: description: > Identifier of the related external CP. Shall be present when the VNFC CP is exposed as an external CP of the VNF instance or connected to an external CP of the VNF instance (see note 2) and shall be absent otherwise. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpProtocolInfo: description: > Network protocol information for this CP. May be omitted if the VNFC CP is exposed as an external CP. The information can be omitted because it is already available as part of the external CP information. See note 3. type: array items: $ref: "#/definitions/CpProtocolInfo" vnfLinkPortId: description: > Identifier of the "VnfLinkPortInfo" structure in the "VnfVirtualLinkResourceInfo" or "ExtManagedVirtualLinkInfo" structure. Shall be present if the CP is associated to a link port on an internal VL (including externally-managed internal VL) of the VNF instance and shall be absent otherwise. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" parentCpId: description: > Identifier of another VNFC CP instance that corresponds to the parent port of a trunk that the present VNFC CP instance participates in. Shall be provided if the present CP instance participates in a trunk as subport. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" metadata: description: > Metadata about this CP. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" metadata: description: > Metadata about this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VnfVirtualLinkResourceInfo: description: > This type represents the information that allows addressing a virtualised resource that is used by an internal VL instance in a VNF instance. NOTE: If only the value or the presence of this attribute is changed in the "VnfVirtualLinkResourceInfo" structure by an LCM operation occurrence, this does not represent a change that requires including a related "AffectedVirtualLink" structure in the VNF LCM operation occurrence notifications or the "VnfLcmOpOcc" structure related to this LCM operation occurrence. type: object required: - id - vnfVirtualLinkDescId - networkResource - vnfLinkPorts properties: id: description: > Identifier of this VnfVirtualLinkResourceInfo instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfVirtualLinkDescId: description: > Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" networkResource: description: > Reference to the VirtualNetwork resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" reservationId: description: > The reservation identifier applicable to the resource. It shall be present when an applicable reservation exists. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfLinkPorts: description: > Links ports of this VL. Shall be present when the linkPort is used for external connectivity by the VNF (refer to VnfLinkPortInfo). May be present otherwise. type: array items: $ref: "#/definitions/VnfLinkPortInfo" metadata: description: > Metadata about this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VirtualStorageResourceInfo: description: > This type represents the information that allows addressing a virtualised resource that is used by a VNF instance. NOTE: If only the value or the presence of this attribute is changed in the "VirtualStorageResourceInfo" structure by an LCM operation occurrence, this does not represent a change that requires including a related "AffectedVirtualStorage" structure in the VNF LCM operation occurrence notifications or the "VnfLcmOpOcc" structure related to this LCM operation occurrence. type: object required: - id - virtualStorageDescId - storageResource properties: id: description: > Identifier of this VirtualStorageResourceInfo instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" virtualStorageDescId: description: > Identifier of the VirtualStorageDesc in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" storageResource: description: > Reference to the VirtualStorage resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" reservationId: description: > The reservation identifier applicable to the resource. It shall be present when an applicable reservation exists. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" metadata: description: > Metadata about this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" AffectedVnfc: description: > This type provides information about added, deleted, modified and temporary VNFCs. type: object required: - id - vduId - changeType - computeResource properties: id: description: > Identifier of the Vnfc instance, identifying the applicable "vnfcResourceInfo" entry in the "VnfInstance" data type. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vduId: description: > Identifier of the related VDU in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case of a "change current VNF Package" to identify whether the affected VNFC instance is associated to a VDU which is referred from the source or destination VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: * ADDED * REMOVED * MODIFIED * TEMPORARY For a temporary resource, an AffectedVnfc structure exists as long as the temporary resource exists. type: string enum: - ADDED - REMOVED - MODIFIED - TEMPORARY computeResource: description: > Reference to the VirtualCompute resource. Detailed information is (for new and modified resources) or has been (for removed resources) available from the VIM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" metadata: description: > Metadata about this resource. The content of this attribute shall be a copy of the content of the "metadata" attribute of the VnfcResourceInfo structure. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" affectedVnfcCpIds: description: > Identifiers of CP(s) of the VNFC instance that were affected by the change. Shall be present for those affected CPs of the VNFC instance that are associated to an external CP of the VNF instance. May be present for further affected CPs of the VNFC instance. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" addedStorageResourceIds: description: > References to VirtualStorage resources that have been added. Each value refers to a VirtualStorageResourceInfo item in the VnfInstance that was added to the VNFC. It shall be provided if at least one storage resource was added to the VNFC. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" removedStorageResourceIds: description: > References to VirtualStorage resources that have been removed. The value contains the identifier of a VirtualStorageResourceInfo item that has been removed from the VNFC, and might no longer exist in the VnfInstance. It shall be provided if at least one storage resource was removed from the VNFC. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" AffectedVirtualLink: description: > This type provides information about added, deleted, modified and temporary VLs, and added or removed VNF link ports. NOTE: When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the "networkResource" attribute refers to the affected virtual link instance, not the link port instance. The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in the "vnfLinkPortIds" attribute. type: object required: - id - vnfVirtualLinkDescId - changeType - networkResource properties: id: description: > Identifier of the virtual link instance, identifying the applicable "vnfVirtualLinkResourceInfo" or "extManagedVirtualLinkInfo" entry in the "VnfInstance" data type. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfVirtualLinkDescId: description: > Identifier of the related VLD in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case of a "change current VNF Package" to identify whether the affected VL instance is associated to a VLD which is referred from the source or destination VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: * ADDED * REMOVED * MODIFIED * TEMPORARY * LINK_PORT_ADDED * LINK_PORT_REMOVED For a temporary resource, an AffectedVirtualLink structure exists as long as the temporary resource exists. When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the "networkResource" attribute refers to the affected virtual link instance, not the link port instance. The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in the "vnfLinkPortIds" attribute. type: string enum: - ADDED - REMOVED - MODIFIED - TEMPORARY - LINK_PORT_ADDED - LINK_PORT_REMOVED networkResource: description: > Reference to the VirtualNetwork resource. Detailed information is (for new and modified resources) or has been (for removed resources) available from the VIM. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" vnfLinkPortIds: description: > Identifiers of the link ports of the affected VL related to the change. Each identifier references a "VnfLinkPortInfo" structure. Shall be set when changeType is equal to "LINK_PORT_ADDED" or "LINK_PORT_REMOVED", and the related "VnfLinkPortInfo" structures are present (case "added") or have been present (case "removed") in the "VnfVirtualLinkResourceInfo" or "ExtManagedVirtualLinkInfo" structures that are represented by the "vnfVirtualLinkResourceInfo" or "extManagedVirtualLinkInfo" attribute in the "VnfInstance" structure. See note. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" metadata: description: > Metadata about this resource. The content of this attribute shall be a copy of the content of the "metadata" attribute of the applicable "VnfVirtualLinkResourceInfo" structure if such structure is referenced by the "id" attribute and it has metadata. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" AffectedVirtualStorage: description: > This type provides information about added, deleted, modified and temporary virtual storage resources. type: object required: - id - virtualStorageDescId - changeType - storageResource properties: id: description: > Identifier of the storage instance, identifying the applicable "virtualStorageResourceInfo" entry in the "VnfInstance" data type. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" virtualStorageDescId: description: > Identifier of the related VirtualStorage descriptor in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case of a "change current VNF Package" to identify whether the affected virtual storage instance is associated to a VirtualStorage descriptor which is referred from the source or destination VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: * ADDED * REMOVED * MODIFIED * TEMPORARY For a temporary resource, an AffectedVirtualStorage structure exists as long as the temporary resource exists. type: string enum: - ADDED - REMOVED - MODIFIED - TEMPORARY storageResource: description: > Reference to the VirtualStorage resource. Detailed information is (for new and modified resources) or has been (for removed resources) available from the VIM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" metadata: description: > Metadata about this resource. The content of this attribute shall be a copy of the content of the "metadata" attribute of the VirtualStorageResourceInfo structure. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VnfLcmOpOcc: description: > This type represents a VNF lifecycle management operation occurrence. Shall be set to the value of the "id" attribute in the "Grant" representing the associated "Individual Grant", if such grant exists. * NOTE 1: This allows the API consumer to obtain the information contained in the latest "result" notification if it has not received it due to an error or a wrongly configured subscription filter. * NOTE 2: Not more than one of changedInfo and modificationsTriggeredByVnfPkgChange shall be present. * NOTE 3: For a particular affected VL, there shall be as many "AffectedVirtualLink" entries as needed for signalling the different types of changes, i.e. one per virtual link and change type. For instance, in the case of signaling affected VL instances involving the addition of a particular VL instance with links ports, one "AffectedVirtualLink" entry signals the addition of the VL by using the "changeType" attribute of "AffectedVirtualLink" structure equal to "ADDED", and another "AffectedVirtualLink" entry signals the addition of VNF link ports of the VL by using the "changeType" equal to "LINK_PORT_ADDED". * NOTE 4: A coordination action has timed out if the VNFM has not been able to read the "Individual coordination action" resource within a timeout interval after requesting the coordination to be started or to be cancelled. The length of the timeout interval is defined by means outside the scope of the present document. * NOTE 5: The list of rejected coordinations may be garbage collected if the LCM operation occurrence has reached a terminal state, i.e. one of "COMPLETED", "FAILED" and "ROLLED_BACK". type: object oneOf: - required: - changedInfo - required: - modificationsTriggeredByVnfPkgChange required: - id - operationState - stateEnteredTime - startTime - vnfInstanceId - operation - isAutomaticInvocation - isCancelPending properties: id: description: > Identifier of this VNF lifecycle management operation occurrence. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" operationState: description: > The state of the LCM operation. $ref: "#/definitions/LcmOperationStateType" stateEnteredTime: description: > Date-time when the current state has been entered. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" startTime: description: > Date-time of the start of the operation. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" vnfInstanceId: description: > Identifier of the VNF instance to which the operation applies $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" grantId: description: > Identifier of the grant related to this VNF LCM operation occurrence. Shall be set to the value of the "id" attribute in the "Grant" representing the associated "Individual Grant", if such grant exists. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" operation: description: > Type of the actual LCM operation represented by this VNF LCM operation occurrence. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/LcmOperationType" isAutomaticInvocation: description: > Set to true if this VNF LCM operation occurrence has been triggered by an automated procedure inside the VNFM (i.e. ScaleVnf / ScaleVnfToLevel triggered by auto-scale, or HealVnf triggered by auto-heal). Set to false otherwise. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Boolean" operationParams: description: > Input parameters of the LCM operation. This attribute shall be formatted according to the request data type of the related LCM operation. In addition, the provisions in clause 5.7 shall apply. The following mapping between operationType and the data type of this attribute shall apply: * INSTANTIATE: InstantiateVnfRequest * SCALE: ScaleVnfRequest * SCALE_TO_LEVEL: ScaleVnfToLevelRequest * CHANGE_FLAVOUR: ChangeVnfFlavourRequest * OPERATE: OperateVnfRequest * HEAL: HealVnfRequest * CHANGE_EXT_CONN: ChangeExtVnfConnectivityRequest * TERMINATE: TerminateVnfRequest * MODIFY_INFO: VnfInfoModifications * CREATE_SNAPSHOT: CreateVnfSnapshotRequest * REVERT_TO_SNAPSHOT: RevertToVnfSnapshotRequest * CHANGE_VNFPKG: ChangeCurrentVnfPkgRequest type: object isCancelPending: description: > If the VNF LCM operation occurrence is in "STARTING", "PROCESSING" or "ROLLING_BACK" state and the operation is being cancelled, this attribute shall be set to true. Otherwise, it shall be set to false. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Boolean" cancelMode: description: > The mode of an ongoing cancellation. Shall be present when isCancelPending=true, and shall be absent otherwise. $ref: "#/definitions/CancelModeType" error: description: > If "operationState" is "FAILED_TEMP" or "FAILED" or "operationState" is "PROCESSING" or "ROLLING_BACK" and previous value of "operationState" was "FAILED_TEMP", this attribute shall be present and contain error information, unless it has been requested to be excluded via an attribute selector. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ProblemDetails" resourceChanges: description: > This attribute contains information about the cumulative changes to virtualised resources that were performed so far by the LCM operation since its start, if applicable. type: object properties: affectedVnfcs: description: > Information about VNFC instances that were affected during the lifecycle operation. See note 1. type: array items: $ref: "#/definitions/AffectedVnfc" affectedVirtualLinks: description: > Information about VL instances that were affected during the lifecycle operation. See note 1 and note 3. type: array items: $ref: "#/definitions/AffectedVirtualLink" affectedExtLinkPorts: description: > Information about external VNF link ports that were affected during the lifecycle operation. See note 1. type: array items: $ref: "#/definitions/AffectedExtLinkPort" affectedVirtualStorages: description: > Information about virtualised storage instances that were affected during the lifecycle operation. See note 1. type: array items: $ref: "#/definitions/AffectedVirtualStorage" changedInfo: description: > Information about the changed VNF instance information, including VNF configurable properties, if applicable. See note 1 and note 2. $ref: "#/definitions/VnfInfoModifications" affectedVipCps: description: > Information about virtual IP CP instances that were affected during the execution of the lifecycle management operation. type: array items: $ref: "#/definitions/AffectedVipCp" changedExtConnectivity: description: > Information about changed external connectivity, if applicable. See note 1. type: array items: $ref: "#/definitions/ExtVirtualLinkInfo" modificationsTriggeredByVnfPkgChange: description: > Information about performed changes of "VnfInstance" attributes triggered by changing the current VNF package, if applicable. Shall be absent if the "operation" attribute is different from "CHANGE_VNFPKG". See note 1 and note 2. $ref: "#/definitions/ModificationsTriggeredByVnfPkgChange" vnfSnapshotInfoId: description: > Identifier of the "individual VNF snapshot" resource. Shall be present if applicable to the type of LCM operation, i.e., if the value of the "operation" attribute is either "CREATE_SNAPSHOT" or "REVERT_TO_SNAPSHOT". $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" lcmCoordinations: description: > Information about LCM coordination actions (see clause 10) related to this LCM operation occurrence. type: object required: - id - coordinationActionName - startTime - endpointType properties: id: description: > Identifier of this coordination action. For a terminated coordination action, this attribute refers to the "id" attribute in the "LcmCoord" data structure (see clause 10.5.2.3). For a timed-out or ongoing coordination action, this attribute refers to the {coordinationId} URI variable in the "Location" header of the "202 Accepted" HTTP response to the POST request that has initiated the coordination action (see clause 10.4.2.3.1). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" coordinationActionName: description: > Indicator of the actual coordination action. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" coordinationResult: description: > The result of executing the coordination action which also implies the action to be performed by the VNFM as the result of this coordination. See note 4. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/LcmCoordResultType" startTime: description: > The time when the VNFM has received the confirmation that the coordination action has been started. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" endTime: description: > The end time when the VNFM has received the confirmation that the coordination action has finished or has been cancelled, or the time when a coordination action has timed out. Shall be present for a coordination action that has finished or timed out (see note 4) and shall be absent if the coordination is ongoing. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" endpointType: description: > The endpoint type used by this coordination action. Valid values: - MGMT: coordination with other operation supporting management systems (e.g. EM) - VNF: coordination with the VNF instance type: string enum: - MGMT - VNF delay: description: > The end of the delay period. This attribute shall be present if the last known HTTP response related to this coordination has contained a "Retry-After" header, and shall be absent otherwise. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" rejectedLcmCoordinations: description: > Information about LCM coordination actions (see clause 10) that were rejected by 503 error which means they will be tried again after a delay. See note 5. type: object required: - coordinationActionName - rejectionTime - endpointType - delay properties: coordinationActionName: description: > Indicator of the actual coordination action. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" rejectionTime: description: > The time when the VNFM has received the 503 response that rejects the actual coordination. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" endpointType: description: > The endpoint type used by this coordination action. Valid values: - MGMT: coordination with other operation supporting management systems (e.g. EM) - VNF: coordination with the VNF instance type: string enum: - MGMT - VNF delay: description: > The end of the delay period, as calculated from the startTime and "Retry-After" header. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/DateTime" warnings: description: > Warning messages that were generated while the operation was executing. If the operation has included LCM coordination actions and these have resulted in warnings, such warnings should be added to this attribute. type: array items: type: string _links: description: > Links to resources related to this resource. type: object required: - self - vnfInstance properties: self: description: > URI of this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" vnfInstance: description: > Link to the VNF instance that the operation applies to. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" grant: description: > Link to the grant for this operation, if one exists. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" cancel: description: > Link to the task resource that represents the "cancel" operation for this VNF LCM operation occurrence, if cancelling is currently allowed. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" retry: description: > Link to the task resource that represents the "retry" operation for this VNF LCM operation occurrence, if retrying is currently allowed. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" rollback: description: > Link to the task resource that represents the "rollback" operation for this VNF LCM operation occurrence, if rolling back is currently allowed. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" fail: description: > Link to the task resource that represents the "fail" operation for this VNF LCM operation occurrence, if declaring as failed is currently allowed. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" vnfSnapshot: description: > Link to the VNF snapshot resource, if the VNF LCM operation occurrence is related to a VNF snapshot. Shall be present if operation="CREATE_SNAPSHOT" or operation="REVERT_TO_SNAPSHOT". $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" AffectedExtLinkPort: description: > This type provides information about added and deleted external link ports (link ports attached to external virtual links). type: object required: - id - changeType - extCpInstanceId - resourceHandle properties: id: description: > Identifier of the link port, identifying the applicable "extLinkPorts" entry in the "ExtVirtualLinkInfo" data type (see clause 5.5.3.2). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: - ADDED - MODIFIED - REMOVED type: string enum: - ADDED - MODIFIED - REMOVED extCpInstanceId: description: > Identifier of the related external CP instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" resourceHandle: description: > Reference to the link port resource. Detailed information is (for added resources) or has been (for removed resources) available from the VIM. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" VnfInfoModifications: description: > This type represents attribute modifications that were performed on an "Individual VNF instance" resource. The attributes that can be included consist of those requested to be modified explicitly in the "VnfInfoModificationRequest" data structure, and additional attributes of the "VnfInstance" data structure that were modified implicitly e.g. when modifying the referenced VNF package. * NOTE: If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly following a request to modify the "vnfdId" attribute, by copying the value of this attribute from the VNFD in the VNF Package identified by the "vnfdId" attribute. type: object properties: vnfInstanceName: description: > If present, this attribute signals modifications of the "vnfInstanceName" attribute in "VnfInstance" as defined in clause 5.5.2.12.. type: string vnfInstanceDescription: description: > If present, this attribute signals modifications of the "vnfInstanceDescription" attribute in "VnfInstance", as defined in clause 5.5.2.12.. type: string vnfConfigurableProperties: description: > If present, this attribute signals modifications of the "vnfConfigurableProperties" attribute in "VnfInstance" as defined in clause 5.5.2.12. In addition, the provisions in clause 5.7 shall apply.. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" metadata: description: > If present, this attribute signals modifications of the "metadata" attribute in "VnfInstance" , as defined in clause 5.5.2.12.. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > If present, this attribute signals modifications of the "extensions" attribute in "VnfInstance", as defined in clause 5.5.2.12. In addition, the provisions in clause 5.7 shall apply.. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfdId: description: > If present, this attribute signals modifications of the "vnfdId" attribute in "VnfInstance", as defined in clause 5.5.2.12.. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfProvider: description: > If present, this attribute signals modifications of the "vnfProvider" attribute in "VnfInstance". See note. type: string vnfProductName: description: > If present, this attribute signals modifications of the "vnfProductName" attribute in "VnfInstance". See note. type: string vnfSoftwareVersion: description: > If present, this attribute signals modifications of the "vnfSoftwareVersion" attribute in "VnfInstance". See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" vnfdVersion: description: > If present, this attribute signals modifications of the "vnfdVersion" attribute in "VnfInstance". See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" vnfcInfoModifications: description: > If present, this attribute signals modifications of certain entries in the "vnfcInfo" attribute array in the "instantiatedVnfInfo" attribute of "VnfInstance", as defined in clause 5.5.2.12. type: array items: $ref: "#/definitions/VnfcInfoModifications" CreateVnfRequest: description: > This type represents request parameters for the "Create VNF identifier" operation. type: object required: - vnfdId properties: vnfdId: description: > Identifier that identifies the VNFD which defines the VNF instance to be created. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfInstanceName: description: > Human-readable name of the VNF instance to be created. type: string vnfInstanceDescription: description: > Human-readable description of the VNF instance to be created. type: string metadata: description: > If present, this attribute provides additional initial values, overriding those obtained from the VNFD, for the "metadata" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling metadata during the operation are defined in clause 5.4.2.3.1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ScaleVnfRequest: description: > This type represents request parameters for the "Scale VNF" operation. type: object required: - type - aspectId properties: type: description: > Indicates the type of the scale operation requested. Permitted values: * SCALE_OUT: adding additional VNFC instances to the VNF to increase capacity * SCALE_IN: removing VNFC instances from the VNF in order to release unused capacity. type: string enum: - SCALE_OUT - SCALE_IN aspectId: description: > Identifier of the scaling aspect. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" numberOfSteps: description: > Number of scaling steps to be executed as part of this Scale VNF operation. It shall be a positive number and the default value shall be 1. type: integer default: 1 additionalParams: description: > Additional parameters passed by the NFVO as input to the scaling process, specific to the VNF being scaled, as declared in the VNFD as part of "ScaleVnfOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ScaleVnfToLevelRequest: description: > This type represents request parameters for the "Scale VNF to Level" operation. for an explanation of VNF scaling. NOTE: Either the instantiationLevelId attribute or the scaleInfo attribute shall be included. type: object anyOf: - oneOf: - required: - instantiationLevelId - required: - scaleInfo properties: instantiationLevelId: description: > Identifier of the target instantiation level of the current deployment flavour to which the VNF is requested to be scaled. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" scaleInfo: description: > For each scaling aspect of the current deployment flavour, indicates the target scale level to which the VNF is to be scaled. See note. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ScaleInfo" additionalParams: description: > Additional parameters passed by the NFVO as input to the scaling process, specific to the VNF being scaled, as declared in the VNFD as part of "ScaleVnfToLevelOpConfig" defined in ETSI GS NFV-IFA 011. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" CancelMode: description: > This type represents a parameter to select the mode of cancelling an ongoing VNF LCM operation occurrence. type: object required: - cancelMode properties: cancelMode: description: > Cancellation mode to apply. $ref: "#/definitions/CancelModeType" LccnSubscriptionRequest: description: > This type represents a subscription request related to notifications about VNF lifecycle changes. type: object required: - callbackUri properties: filter: description: > Filter settings for this subscription, to define the subset of all notifications this subscription relates to. A particular notification is sent to the subscriber if the filter matches, or if there is no filter. $ref: "#/definitions/LifecycleChangeNotificationsFilter" callbackUri: description: > The URI of the endpoint to send the notification to. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Uri" authentication: description: > Authentication parameters to configure the use of Authorization when sending notifications corresponding to this subscription, as defined in clause 8.3.4 of ETSI GS NFV-SOL 013. This attribute shall only be present if the subscriber requires authorization of notifications. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/SubscriptionAuthentication" verbosity: description: > This attribute signals the requested verbosity of LCM operation occurrence notifications. If it is not present, it shall default to the value "FULL". $ref: "#/definitions/LcmOpOccNotificationVerbosityType" LccnSubscription: description: > This type represents a subscription related to notifications about VNF lifecycle changes. type: object required: - id - callbackUri - verbosity - _links properties: id: description: > Identifier of this subscription resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" filter: description: > Filter settings for this subscription, to define the subset of all notifications this subscription relates to. A particular notification is sent to the subscriber if the filter matches, or if there is no filter. $ref: "#/definitions/LifecycleChangeNotificationsFilter" callbackUri: description: > The URI of the endpoint to send the notification to. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Uri" verbosity: description: > This attribute signals the verbosity of LCM operation occurrence notifications. $ref: "#/definitions/LcmOpOccNotificationVerbosityType" _links: description: > Links to resources related to this resource. type: object required: - self properties: self: description: > URI of this resource. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Link" ExtVirtualLinkInfo: description: > This type represents information about an external VL. NOTE: This attribute reflects the current configuration information that has resulted from merging into this attribute the "VnfExtCpData" information which was passed as part of the "ExtVirtualLinkData" structure in the input of the most recent VNF LCM operation such as "InstantiateVnfRequest", "ChangeExtVnfConnectivityRequest", "ChangeVnfFlavourRequest" or "ChangeCurrentVnfPkgRequest", or in the Grant response. If applying such change results in an empty list of "currentVnfExtCpData" structure instances, the affected instance of "ExtVirtualLinkInfo" shall be removed from its parent data structure. type: object required: - id - resourceHandle - currentVnfExtCpData properties: id: description: > Identifier of the external VL and the related external VL information instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" resourceHandle: description: > Reference to the resource realizing this VL. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" extLinkPorts: description: > Link ports of this VL. type: array items: $ref: "#/definitions/ExtLinkPortInfo" currentVnfExtCpData: description: > Allows the API consumer to read the current CP configuration information for the connection of external CPs to the external virtual link. See note. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/VnfExtCpData" VnfLinkPortInfo: description: > This type represents a link port of an internal VL of a VNF. NOTE 1: Either cpInstanceId with cpInstanceType set to "EXT_CP" or any combination of cpInstanceId with cpInstanceType set to "VNFC_CP" and vipCpInstanceId (i.e. one or both of them) shall be present for a VnfLinkPortInfo. In case both cpInstanceId with cpInstanceType set to "VNFC_CP" and vipCpInstanceId are present, the two different CP instances share the linkport. NOTE 2: Annex A.4 of ETSI GS NFV-IFA 007 provides examples for configurations where both vipCpInstanceId and vnfcCpInstanceId are present (UC#5 and UC#5-b), only vnfcCpInstanceId is present (UC#2), or only vipCpInstanceId is present (UC6 and UC#6-b). NOTE 3: The value of "trunkResourceId" is scoped by the value of "vimConnectionId" in the "resourceHandle" attribute. type: object required: - id - resourceHandle properties: id: description: > Identifier of this link port as provided by the entity that has created the link port. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" resourceHandle: description: > Reference to the virtualised resource realizing this link port. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" cpInstanceId: description: > When the link port is used for external connectivity by the VNF, this attribute represents the identifier of the external CP associated with this link port. When the link port is used for internal connectivity in the VNF, this attribute represents the identifier of the VNFC CP to be connected to this link port. Shall be present when the link port is used for external connectivity by the VNF. May be present if used to reference a VNFC CP instance. There shall be at most one link port associated with any external connection point instance or internal connection point (i.e. VNFC CP) instance. The value refers to an "extCpInfo" item in the VnfInstance or a "vnfcCpInfo" item of a "vnfcResourceInfo" item in the VnfInstance. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpInstanceType: description: > Type of the CP instance that is identified by cpInstanceId. Shall be present if "cpInstanceId" is present and shall be absent otherwise. Permitted values: - VNFC_CP: The link port is connected to a VNFC CP. - EXT_CP: The link port is associated to an external CP. See note 1. type: string enum: - VNFC_CP - EXT_CP vipCpInstanceId: description: > VIP CP instance of the VNF connected to this link port. May be present. See notes 1, and 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" trunkResourceId: description: > Identifier of the trunk resource in the VIM. Shall be present if the present link port corresponds to the parent port that the trunk resource is associated with. See note 3. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVim" ExtLinkPortInfo: description: > This type represents information about a link port of an external VL, i.e. a port providing connectivity for the VNF to an NS VL. NOTE 1: The use cases UC#4 and UC#5 in clause A.4 of ETSI GS NFV-IFA 007 provide examples for such a configuration. NOTE 2: The value of "trunkResourceId" is scoped by the value of "vimConnectionId" in the "resourceHandle" attribute. type: object required: - id - resourceHandle properties: id: description: > Identifier of this link port as provided by the entity that has created the link port. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" resourceHandle: description: > Reference to the virtualised resource realizing this link port. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/ResourceHandle" cpInstanceId: description: > Identifier of the external CP of the VNF connected to this link port. There shall be at most one link port associated with any external connection point instance. The value refers to an "extCpInfo" item in the VnfInstance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" secondaryCpInstanceId: description: > Additional external CP of the VNF connected to this link port. If present, this attribute shall refer to a "secondary" ExtCpInfo item in the VNF instance that exposes a virtual IP CP instance which shares this linkport with the external CP instance referenced by the "cpInstanceId" attribute. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" trunkResourceId: description: > Identifier of the trunk resource in the VIM. Shall be present if the present link port corresponds to the parent port that the trunk resource is associated with. See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVim" CpProtocolInfo: description: > This type describes the protocol layer(s) that a CP uses together with protocol-related information, like addresses. NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported. type: object required: - layerProtocol properties: layerProtocol: description: > The identifier of layer(s) and protocol(s) associated to the network address information. Permitted values: IP_OVER_ETHERNET. See note. type: string enum: - IP_OVER_ETHERNET ipOverEthernet: description: > IP addresses over Ethernet to assign to the extCP instance. Shall be present if layerProtocol is equal to " IP_OVER_ETHERNET", and shall be absent otherwise. $ref: "#/definitions/IpOverEthernetAddressInfo" IpOverEthernetAddressInfo: description: > This type represents information about a network address that has been assigned. NOTE 1: At least one of "macAddress" or "ipAddresses" shall be present. NOTE 2: Exactly one of "addresses" or "addressRange" shall be present. NOTE 3: If the Cp instance represents a subport in a trunk, segmentationId shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the segmentationId may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local segmentationId to whatever segmentationId is actually used by the NFVI’s transport technology. type: object anyOf: - required: - macAddress - required: - ipAddresses oneOf: - required: - addresses - required: - addressRange properties: macAddress: description: > MAC address, if assigned. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/MacAddress" segmentationId: description: > Identification of the network segment to which the Cp instance connects to. See notes 3 and 4. type: string ipAddresses: description: > Addresses assigned to the CP instance. Each entry represents IP addresses assigned by fixed or dynamic IP address assignment per subnet. See note 1. type: array items: type: object required: - type properties: type: description: > The type of the IP addresses. Permitted values: IPV4, IPV6. type: string enum: - IPV4 - IPV6 addresses: description: > Fixed addresses assigned (from the subnet defined by "subnetId" if provided). See note 2. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IpAddress" isDynamic: description: > Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if "addresses" is present and shall be absent otherwise. type: boolean addressRange: description: > An IP address range used, e.g. in case of egress connections. See note 2. type: object required: - minAddress - maxAddress properties: minAddress: description: > Lowest IP address belonging to the range. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IpAddress" maxAddress: description: > Highest IP address belonging to the range $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IpAddress" subnetId: description: > Subnet defined by the identifier of the subnet resource in the VIM. In case this attribute is present, IP addresses are bound to that subnet. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVim" MonitoringParameter: type: object required: - id - performanceMetric properties: id: description: > Identifier of the monitoring parameter defined in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" name: description: > Human readable name of the monitoring parameter, as defined in the VNFD. type: string performanceMetric: description: > Performance metric that is monitored. This attribute shall contain the related "Measurement Name" value as defined in clause 7.2 of ETSI GS NFV-IFA 027. type: string LifecycleChangeNotificationsFilter: description: > This type represents a subscription filter related to notifications about VNF lifecycle changes. At a particular nesting level in the filter structure, the following applies: All attributes shall match in order for the filter to match (logical "and" between different filter attributes). If an attribute is an array, the attribute shall match if at least one of the values in the array matches (logical "or" between the values of one filter attribute). NOTE: The permitted values of the "notificationTypes" attribute are spelled exactly as the names of the notification types to facilitate automated code generation systems. type: object properties: vnfInstanceSubscriptionFilter: description: > Filter criteria to select VNF instances about which to notify. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/VnfInstanceSubscriptionFilter" notificationTypes: description: > Match particular notification types. Permitted values: - VnfLcmOperationOccurrenceNotification - VnfIdentifierCreationNotification - VnfIdentifierDeletionNotification See note. type: array items: type: string enum: - VnfLcmOperationOccurrenceNotification - VnfIdentifierCreationNotification - VnfIdentifierDeletionNotification operationTypes: description: > Match particular VNF lifecycle operation types for the notification of type VnfLcmOperationOccurrenceNotification. May be present if the "notificationTypes" attribute contains the value "VnfLcmOperationOccurrenceNotification", and shall be absent otherwise. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/LcmOperationType" operationStates: description: > Match particular LCM operation state values as reported in notifications of type VnfLcmOperationOccurrenceNotification. May be present if the "notificationTypes" attribute contains the value "VnfLcmOperationOccurrenceNotification", and shall be absent otherwise. type: array items: $ref: "#/definitions/LcmOperationStateType" LccnLinks: description: > This type represents the links to resources that a notification can contain. type: object required: - vnfInstance - subscription properties: vnfInstance: description: > Link to the resource representing the VNF instance to which the notified change applies. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/NotificationLink" subscription: description: > Link to the related subscription. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/NotificationLink" vnfLcmOpOcc: description: > Link to the VNF lifecycle management operation occurrence that this notification is related to. Shall be present if there is a related lifecycle operation occurrence. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/NotificationLink" VnfExtCpInfo: description: > This type represents information about an external CP of a VNF. NOTE 1: The attributes "associatedVnfcCpId", "associatedVipCpId" and "associatedVnfVirtualLinkId" are mutually exclusive. Exactly one shall be present. NOTE 2: An external CP instance is not associated to a link port in the cases indicated for the “extLinkPorts” attribute in clause 4.4.1.11. type: object required: - id - cpdId - cpConfigId - cpProtocolInfo oneOf: - required: - associatedVnfcCpId - required: - associatedVipCpId - required: - associatedVnfVirtualLinkId properties: id: description: > Identifier of the external CP instance and the related information instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpdId: description: > Identifier of the external CPD, VnfExtCpd, in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" cpConfigId: description: > Identifier that references the applied "VnfExtCpConfig" entry in the "cpConfig" map of the "currentVnfExtCpData" in the "ExtVirtualLinkInfo" structure. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" cpProtocolInfo: description: > Network protocol information for this CP. type: array items: $ref: "#/definitions/CpProtocolInfo" extLinkPortId: description: > Identifier of the "ExtLinkPortInfo" structure inside the "ExtVirtualLinkInfo" structure. Shall be present if the CP is associated to a link port. See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" metadata: description: > Metadata about this external CP. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" associatedVnfcCpId: description: > Identifier of the "vnfcCpInfo" structure in "VnfcResourceInfo" structure that represents the VNFC CP which is exposed by this external CP instance, either directly or via a floating IP address. Shall be present in case this CP instance maps to a VNFC CP. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" associatedVipCpId: description: > Identifier of the VIP CP instance that is exposed as this VnfExtCp instance, either directly or via a floating IP address, and the related "VipCpInfo" structure in "VnfInstance". Shall be present if the cpdId of this VnfExtCp has a vipCpd attribute. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" associatedVnfVirtualLinkId: description: > Identifier of the "VnfVirtualLinkResourceInfo" structure that represents the internal VL or of the "ExtManagedVirtualLinkInfo" structure that represents the externally-managed internal VL which is exposed by this external CP instance. Shall be present in case this CP instance maps to an internal VL (including externally-managed internal VL). See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" VnfOperationalStateType: description: > STARTED: The VNF instance is up and running. STOPPED: The VNF instance has been shut down. type: string enum: - STARTED - STOPPED LcmOperationStateType: description: > STARTING: The LCM operation is starting. PROCESSING: The LCM operation is currently in execution. COMPLETED: The LCM operation has been completed successfully. FAILED_TEMP: The LCM operation has failed and execution has stopped, but the execution of the operation is not considered to be closed. FAILED: The LCM operation has failed and it cannot be retried or rolled back, as it is determined that such action won't succeed. ROLLING_BACK: The LCM operation is currently being rolled back. ROLLED_BACK: The LCM operation has been successfully rolled back, i.e. The state of the VNF prior to the original operation invocation has been restored as closely as possible. type: string enum: - STARTING - PROCESSING - COMPLETED - FAILED_TEMP - FAILED - ROLLING_BACK - ROLLED_BACK CancelModeType: description: > Cancellation mode. GRACEFUL: If the VNF LCM operation occurrence is in "PROCESSING" or "ROLLING_BACK" state, the VNFM shall not start any new resource management operation and shall wait for the ongoing resource management operations in the underlying system, typically the VIM, to finish execution or to time out. After that, the VNFM shall put the operation occurrence into the FAILED_TEMP state. If the VNF LCM operation occurrence is in "STARTING" state, the VNFM shall not start any resource management operation and shall wait for the granting request to finish execution or time out. After that, the VNFM shall put the operation occurrence into the ROLLED_BACK state. FORCEFUL: If the VNF LCM operation occurrence is in "PROCESSING" or "ROLLING_BACK" state, the VNFM shall not start any new resource management operation, shall cancel the ongoing resource management operations in the underlying system, typically the VIM, and shall wait for the cancellation to finish or to time out. After that, the VNFM shall put the operation occurrence into the FAILED_TEMP state. If the VNF LCM operation occurrence is in "STARTING" state, the VNFM shall not start any resource management operation and put the operation occurrence into the ROLLED_BACK state. type: string enum: - GRACEFUL - FORCEFUL ######################################################################################################################## VnfcInfoModifications: description: > This type represents modifications of an entry in an array of "VnfcInfo" objects. * NOTE: The attribute "id" in this data type represents the same identifier as the attribute "vnfcInstanceId" in other related data types in the present document. For reasons of backward compatibility, this misalignment is not corrected. type: object required: - id - vnfcConfigurableProperties properties: id: description: > Identifier of the VNFC instance of which the information is to be modified. The identifier references the "id" attribute in a "VnfcInfo" structure. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfcConfigurableProperties: description: > Changes of the configurable properties of the VNFC instance. When this structure is part of a request, the modifications signalled in this attribute shall be applied according to the rules of JSON Merge Patch (see IETF RFC 7396). In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" VnfcInfo: description: > This type represents the information about a VNFC instance that is part of a VNF instance. * NOTE: This allows to represent the error condition that a VNFC instance has lost its resources. type: object required: - id - vduId - vnfcState properties: id: description: > Identifier of the VNFC instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vduId: description: > Reference to the applicable VDU in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfcResourceInfoId: description: > Identifier of the VnfcResourceInfo instance representing the virtualised resources used by this VNFC instance. See note. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfcState: description: > Identifier of the VnfcResourceInfo instance representing the virtualised resources used by this VNFC instance. State of the VNFC instance. Permitted values: • STARTED: The VNFC instance is up and running. • STOPPED: The VNFC instance has been shut down type: string enum: - STARTED - STOPPED $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfcConfigurableProperties: description: > Current values of the configurable properties of the VNFC instance. Configurable properties referred in this attribute are declared in the VNFD. This attribute can be modified with the PATCH method. In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" ModificationsTriggeredByVnfPkgChange: description: > This type represents attribute modifications that were performed on an "Individual VNF instance" resource when changing the current VNF package. The attributes that can be included consist of those requested to be modified explicitly in the "ChangeCurrentVnfPkgRequest" data structure, and additional attributes of the "VnfInstance" data structure that were modified implicitly during the operation. NOTE 1: This attribute represents the delta (semantics as per IETF RFC 7396, JSON Merge Patch) between the value of the attribute at the start of the "Change current VNF package" operation and the value of the attribute at its completion. NOTE 2: If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly during the related operation and contains a copy of the value of the related attribute from the VNFD in the VNF Package identified by the "vnfdId" attribute. type: object properties: vnfConfigurableProperties: description: > This attribute signals the modifications of the "vnfConfigurableProperties" attribute in "VnfInstance" performed by the operation and shall be present if that attribute was modified during the operation. See note 1. In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" metadata: description: > This attribute signals the modifications of the "metadata" attribute in "VnfInstance" performed by the operation and shall be present if that attribute was modified during the operation. See note 1. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" extensions: description: > This attribute signals the modifications of the "extensions" attribute in "VnfInstance" performed by the operation and shall be present if that attribute was modified during the operation. See note 1. In addition, the provisions in clause 5.7 shall apply. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs" vnfdId: description: > If present, this attribute signals the new value of the "vnfdId" attribute in "VnfInstance". $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfProvider: description: > If present, this attribute signals the new value of the "vnfProvider" attribute in "VnfInstance". See note 2. type: string vnfProductName: description: > If present, this attribute signals the new value of the "vnfProductName" attribute in "VnfInstance". See note 2. type: string vnfSoftwareVersion: description: > If present, this attribute signals the new value of the "vnfSoftwareVersion" attribute in "VnfInstance". See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" vnfdVersion: description: > If present, this attribute signals the new value of the "vnfdVersion" attribute in "VnfInstance". See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Version" LcmOpOccNotificationVerbosityType: description: > The enumeration LcmOpOccNotificationVerbosityType provides values to control the verbosity of LCM operation occurrence notifications. * FULL: This signals a full notification which contains all change details. * SHORT: This signals a short notification which omits large-volume change details to reduce the size of data to be sent via the notification mechanism. type: string enum: - FULL - SHORT AffectedVipCp: description: > This type provides information about added, deleted and modified virtual IP CP instances. type: object required: - cpInstanceId - cpdId - changeType properties: cpInstanceId: description: > Identifier of the virtual IP CP instance and the related "VipCpInfo" structure in "VnfInstance". $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpdId: description: > Identifier of the VipCpd in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Reference to the VNFD. Shall be present in case of a "change current VNF Package" to identify whether the affected virtual CP instance is associated to a VipCpd which is referred from the source or destination VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" changeType: description: > Signals the type of change. Permitted values: - ADDED - REMOVED - MODIFIED type: string enum: - ADDED - REMOVED - MODIFIED VipCpInfo: description: > This type provides information related to virtual IP (VIP) CP. NOTE 1: It is possible that there is no associated VnfcCp because the VIP CP is available but not associated yet. NOTE 2: If only the value or the presence of this attribute is changed in the "VipCpInfo" structure by an LCM operation occurrence, this does not represent a change that requires including a related "AffectedVipCp" structure in the VNF LCM operation occurrence notifications or the "VnfLcmOpOcc" structure related to this LCM operation occurrence. type: object required: - cpInstanceId - cpdId properties: cpInstanceId: description: > Identifier of this VIP CP instance and of this VipCpInfo. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpdId: description: > Identifier of the VIP Connection Point Descriptor, VipCpd, in the VNFD. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnfd" vnfdId: description: > Identifier of the VNFD. Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change current VNF package" operation or due to its final failure). See note 2. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/Identifier" vnfExtCpId: description: > When the VIP CP is exposed as external CP of the VNF, the identifier of this external VNF CP instance. $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" cpProtocolInfo: description: > Protocol information for this CP. There shall be one cpProtocolInfo for layer 3. There may be one cpProtocolInfo for layer 2. type: array items: $ref: "#/definitions/CpProtocolInfo" associatedVnfcCpIds: description: > Identifiers of the VnfcCps that share the virtual IP addresse allocated to the VIP CP instance. See note. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" vnfLinkPortId: description: > Identifier of the "VnfLinkPortInfo" structure in the "VnfVirtualLinkResourceInfo" or "ExtManagedVirtualLinkInfo" structure. Shall be present if the CP is associated to a link port on an internal VL (including externally-managed internal VL). $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/IdentifierInVnf" metadata: description: > Metadata about this VIP CP. type: array items: $ref: "../../General_Definitions/SOL002_def.yaml#/definitions/KeyValuePairs"